Windows IIS virtual directories

I'm setting up CPS and Contribute 3 on a large site. Users in
different departments have access to specific folders that contain
their pages. What I can't seem to be able to do is to add virtual
directories to the users' list of folders to edit (though I really
just want them to be able to link to files in those virtual
directories). The virtual directories contain document libraries
(agendas, minutes, reports, media releases) that are maintained by
another system, so it seemed like a good idea to keep those folders
out of the root folder of the site that the CPS manages. But those
virtual directories don't show up in the list of folders to allow
users to edit. Has anyone run into this problem and found a way
around it? I could just drop the virtual directory idea if that's
the only way.
Tom Benjamin
Web Development Analyst
Capital Regional District, Victoria, BC, Canada

Hi,
If NDES is the only CA role service on this server, this problem is expected. Because NDES requires the installation of the Certification Authority Web Enrollment role service on the same Server.
The Certificate Authority Web Enrollment pages are needed since the NDES IIS application is a virtual directory underneath the Web Enrollment pages (CertSrv).
Hope this helps.
Regards,
Bruce
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Who is VERY strange is that (in the "Thomas Larsen" configuration so without installing the "Web
Enrollment pages") ... we can access to the admin page with the url http://serveurNdes/certsrv/mscep_admin" !!! How is it possible !!

Similar Messages

Sccm 2012 DP failed to create iis virtual directories

I am trying to install a branch server as Sccm 2012 DP.
I already installed around 15 branch servers without any problems.
The problem I have is that the branch server failed to create iis virtual directories.
In my console under Monitoring, component status It writes that Distribution Manager successfully installed iis component of operating system to distribution point ""
Next it writes error to send packages to that branch server.
The site server distmgr.log shows the error below:
Failed to start primary service wdsserver
Microsoft Sql Server Native Client 11.0 login failed for user "xxx"
Failed to connect to the sql server connection type : SMS ACCESS
for Display = \\myserver\mswnet: sms_site= XXX failed to get master SCF.
Currently site xxx is initializing site control data. Cant get Master SCF from database at this time. will try later.
DPConnection;;;; ConnectWMI() failed to connect to branch server.
I try to remove the dp role, leave it for 12 hours reboot the server and assign the role again but same problem.
Any idea ?
Nikkoscy

Hi,
Have you installed all features required?
Technet prerequisite list for site system roles:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

TWO IIS virtual directories for TWO WebLogic Instances

I have an IIS website with one IIS virtual directory which is using iisproxy.dll
to redirect the request to a weblogic instance.
Now, I would like to create another virtual directory which has to redirect to
another weblogic instance (with different port). How can I do that? I have tried
to create another copy of iisproxy.dll & iisproxy.ini but that new website still
forward the request to the old website. Please advice.
Many thanks.
Ronald

Hi Ronald
This is not possible with existing weblogic releases.
However There are couple of workarounds for this.
1. Setup two IIS Sites forwarding requests to two weblogic servers.
Make sure The IIS sites are running with Application Protection of
High(Isolated).
Make sure the iisproxy.ini and iisproxy.dll for theses different sites
are in different
diectories and configure the sites and iisproxy.ini files appropriately.
- This, i tries and works great.
2. Let All the requests go to one weblogic server. Register a servlet
with you'r second virtual directory name as a proxy servlet proxying to
the second
weblogic server.
- This might work. But you have to remeber the performance impact of
proxying twice.
Hope this helps
vijay
"Ronald" <[email protected]> wrote in message
news:3aff5049$[email protected]..
>
I have an IIS website with one IIS virtual directory which is usingiisproxy.dll
to redirect the request to a weblogic instance.
Now, I would like to create another virtual directory which has toredirect to
another weblogic instance (with different port). How can I do that? I havetried
to create another copy of iisproxy.dll & iisproxy.ini but that new websitestill
forward the request to the old website. Please advice.
Many thanks.
Ronald

Exchange Server IIS Virtual Directories

Hi Guys,
I need to remove all the directories from Exchange CAS Server except the directories are required for ActiveSync. can someone give me the direction about the directories are not required for ActiveSync.
Thanks in Advance.
Regards
Rishi Aggarwal
Regards Rishi Aggarwal

my client made a decision about removing external OWA but ActiveSync. so looking what are the Exact directories are required for ActiveSync so except that i can remove every directory.
Hi,
OWA works only internally,
ActiveSync works both internally and externally, right?
I would suggest to create a new website with a unique IP in IIS and only adding ActiveSync to that website using a cmdlet. That would give us a website hosted on the box that served the ActiveSync devices but nothing else, leaving the OWA open for internal
access. The firewall would point to this website/IP on the CAS. We could also create a virtual directory under there for /OWA and /Exchange which would serve up the generic “this service is no longer available, please contact the help desk” message as the
default webpage. This makes it easy to manage, monitor, and control traffic to.
Command to create a new Active Virtual directory:
New-ActiveSyncVirtualDirectory -WebSiteName "domain.com"
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

CFGRID not working with IIS Virtual Directories

I was wondering if anyone else is having this issue?
Cfgrid works fine outside of the virtual directory. But when
I put the file in a virtual directory the applet doesn't load.
Please help
Thank you
Jeff S

Got it working with "nodePath"
Thanks,
Ranjith Pillai

Cisco ACE and IIS Virtual Directories

Hello All,
I have the Load Balancing between to servers working correctly except for on thing. If I enter www.domainname.com\apps into the browser it will returns a 302 page, but if I enter www.domainname.com\apps\ the page will Pull up. Is there a way for the ACE to add the \ after the Virtual Directory?

Here is an example of the configuration:
rserver host NET01
ip address 10.0.20.24
inservice
rserver host NET02
ip address 10.0.20.25
inservice
serverfarm host NET-Farm
predictor leastconns
rserver NET01 80
rserver NET02 80
    inservice
parameter-map type http HTTP_PARAMETER_MAP
persistence-rebalance
sticky ip-netmask 255.255.255.255 address source NET-IP
replicate sticky
serverfarm NET-Farm backup Maintenance
class-map match-all NET
2 match virtual-address 10.0.20.21 tcp eq https
policy-map type loadbalance first-match NET
class class-default
    sticky-serverfarm NET-IP
    insert-http x-forward header-value "%is"
policy-map multi-match int71
class NET
    loadbalance vip inservice
    loadbalance policy NET
    loadbalance vip icmp-reply active
    nat dynamic 6 vlan 71
    appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 71
no icmp-guard
nat-pool 6 10.0.20.21 10.0.20.21 netmask 255.255.255.255 pat

Restore the deleted extended IIS web site into Virtual directories

Hi,
i deleted the IIS site from virtual directories and as well from IIS. But still i can see the extended web site zone in the Central administration, General Settings from the remove SharePoint from IIS web site. now question is there any way i can restore
the deleted iis site zone any how?
Thanks

Hi Trevor,
Thanks for your answer. i need some suggestion regarding on going issue. First i have created a web application at port 80 when it was in singer server and then i extended to 443 and 80 in multi-tier farm as you can see in the below image
And then i deleted IIS site from IIS itself and from Virtual directories as you can see in the below picture. Then i blinded the "SharePointDemo-80" site with host header at port 443 With default zone AAM. now i can access the site well but problem
is if i want to deploy any custom solution, getting error "The web.config is invalid on this IIS web site: "C:\inetpub\wwwroot\wss\VirtualDirectories\demoportal.bbcat.local80\web.config. " and also crawler is not crawling any items. my
understanding is, as there is no IIS site into virtual directories obviously will throwing error. Usually first i create web application at different port (example 8080) and then extend the application to 80 or 443. As i have already place this web application
and did customization, what will be the best way to handle this situation?
Thanks in advanced!!

Multiple Websites or virtual directories in IIS

Hi,
I am kind of confused by the doc:
http://e-docs.bea.com/wls/docs70/plugins/isapi.html#109058
multiple Websites and virtual directories are totally different things.
I am assuming here is talking about the virtual directory. But when I tried to follow the steps to set the Application Protection (last step) I got a popup warning says:
COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator.
what's that mean? how can I set it?
Thanks

Hi Teser,
I'm glad you wrote this post, because I've been struggling with this beast for the better part of a day now. I find the documentation to be misleading, confusing and poorly written.
I hope that someone can enlighten regarding this one, 'cause I am getting the same error. In the meantime I am trying to find out the meaning of this message and will post it if I find it.
Regards

Exchange 2013 Autodiscover and Webservices virtual directories with wrong address

Hey people,
I have 3 2013 Servers
Server 1 CAS
Server 2 & 3 MBX
having a bit of trouble here - everything was working fine after migration (about 6months ago), and now mac users can't access e-mail.
If I try to access EWS page (https://webmail.domain.co.ao/EWS/exchange.asmx) , i get
Service
You have created a service.
To test this service, you will need to create a client and use it to call the service. You can do this using the svcutil.exe tool from the command line with the following syntax:
svcutil.exe https://SERVER2.domain.int:444/EWS/Services.wsdl
If I try to access the autodiscover webpage, i get
<?xml version="1.0" encoding="UTF-8"?>
-<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">-<Response>-<Error Id="1286627925" Time="17:58:59.7730521"><ErrorCode>600</ErrorCode><Message>Invalid Request</Message><DebugData/></Error></Response></Autodiscover>
When testing outlook web services, i get the following error
[PS] C:\Windows\system32>Test-OutlookWebServices
Source ServiceEndpoint Scenario Result Latency
(MS)
SERVER2.domain.int webmail.domain.co.ao Autodiscover: Outlook Provider Failure 64
SERVER2.domain.int Exchange Web Services Skipped 0
SERVER2.domain.int Availability Service Skipped 0
SERVER2.domain.int Offline Address Book Skipped 0
if i run
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory | fl
Creating a new session for implicit remoting of "Get-AutodiscoverVirtualDirectory" command...
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
Name : Autodiscover (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
LiveIdNegotiateAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
OAuthAuthentication : True
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/Autodiscover
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\Autodiscover
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
ExternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=Autodiscover (Default Web
Site),CN=HTTP,CN=Protocols,CN=SERVER1A,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=int
Identity : SERVERONE\Autodiscover (Default Web Site)
Guid : fbed978f-7442-46ac-bb3c-53d9d7995507
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
WhenChanged : 12/19/2013 10:30:26 AM
WhenCreated : 12/19/2013 10:30:26 AM
WhenChangedUTC : 12/19/2013 9:30:26 AM
WhenCreatedUTC : 12/19/2013 9:30:26 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
and run
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | fl
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
CertificateAuthentication :
InternalNLBBypassUrl :
GzipLevel : High
MRSProxyEnabled : False
Name : EWS (Default Web Site)
InternalAuthenticationMethods : {Basic, Digest}
ExternalAuthenticationMethods : {Basic, Digest}
LiveIdNegotiateAuthentication :
WSSecurityAuthentication : False
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : True
WindowsAuthentication : False
OAuthAuthentication : False
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/EWS
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\EWS
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
ExternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=SERVRE1,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAINL,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domainl,DC=int
Identity : SERVER1\EWS (Default Web Site)
Guid : cbdd447b-54f8-4bba-9834-6c28b807711e
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
WhenChanged : 12/19/2013 9:31:11 AM
WhenCreated : 12/19/2013 9:31:11 AM
WhenChangedUTC : 12/19/2013 8:31:11 AM
WhenCreatedUTC : 12/19/2013 8:31:11 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
Summarizing:
webmail.domain.co.ao maps to server1
Autodiscover and exchange web services point out to server1 (CAS), but when openning the respective webpages, the result is an error.
I have already deleted and recreated the autodiscover and EWS virtual directories but with no success.
Help anyone?
Many thanks,
Andrey

Hi Andrey,
Exchange Web Service in Exchange server configuration is working for all users in your Exchange environment, not just for one specific user. If you want to double make sure the EWS service in client side, we can directly access the EWS URL in IE of your
Windows machine, and see whether a proper XML file is returned. If so, then we can safely ignore the web service test result.
As for automatic signature application, do you mean
Add a signature automatically to every message? Please try to remove the signature and reset it again to check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

SWSE logical profile apply don't crete virtual directories

Hello,
I have installed Siebel 8.2 server on my Windows 7 machine.
I have completed install &configuration for Gateway Name Server, Siebel Enterprise Server, Sieber Server & SWSE.
All servers & Oracle database services are running.
After applying SWSE logical profile virtual directories are not getting created in IIS.
PFB configuration used while applying SWSE logical profile.
AppServerHostName=windows7test
ConfigMode=VERT
ConfigTask=ConfigureSWSEPhysical
current_section=
current_step=Response
DeployedLanguage=ENU
DoubleQuote="
eappscfgExists=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver\eapps.cfg
eappsprofile=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver
EnableVirtualHosts=false
EnterpriseServer=
EVTWelcome=Configuration Wizard Hint: Siebel Bookshelf provides searchable documentation. For EVT command-line help run evt -? or EVT -h.
first_section=InitialSetup
first_step=MainTask
GatewayAddress=
GatewayCreateDefaultRead=
GatewayUseDefaultRead=
HostName=windows7test
LoadBalancerOption=SingleServer
LoadBalancingServer=windows7test:2321
MainTask=Create
OperatingSystem=windows 7
OSDirSeparator=\
OSType=x86
RequestComponent=SRMSynch
RequestServer=
SCBPort=2321
SiebelBinDir=c:\siebel\8.2.2.0.0\sweapp\bin
SiebelDbsrvrRoot=c:\siebel\8.2.2.0.0\sweapp\dbsrvr
SiebelEncryption=
SiebeLibDir=c:\siebel\8.2.2.0.0\sweapp\lib
SiebelInstalledDir=c:/siebel/8.2.2.0.0/sweapp
SiebelLanguage=ENU
SiebelLogArch=
SiebelLogDir=
SiebelLogEvents=
SiebelLogFile=
SiebelMaxThreads=
SiebelMsgDir=c:\siebel\8.2.2.0.0\sweapp\locale\enu
SiebelPassword=
SiebelProgName=
SiebelRoot=c:\siebel\8.2.2.0.0\sweapp
SiebelRootParm=-h c:\siebel\8.2.2.0.0\sweapp
SiebelTableOwner=
SiebelTempDir=c:\siebel\8.2.2.0.0\sweapp\temp
SiebelUser=
SiebelVersion=8.2.2 SIA [22314] ENU
SWSERoot=c:\siebel\8.2.2.0.0\sweapp
SWSEServer=c:\siebel\8.2.2.0.0\sweapp\Admin\Webserver
TraceLevel=1
UnicodeEnable=
WindowsSystemRoot=C:\Windows\system32
I am logged in as Admin user of my windows 7 machine.
I have provided read/write permission on entired C:\siebel directory for windows Admin user as well as IIS_USRS.
IIS version is 7.5.7600.16385.
Please help me dig down what may be going wrong.
Thanks,
Harshal

Hello,
As I see this version of IIS comes as a default with Windows 7.
I tried to look how it can be downgraded to IIS 6 but no help.
So can you please tell me how we can user siebel web services in such case?
Is there any other web server component in siebel that we can use instead of IIS or any settings in IIS 7?
Thanks,
Harshal

Coldfusion 9.01 no longer recognizes virtual directories

Hi -
I have an application that has been working fine for over a year and now anything that references Virtual Directories no longer functions. Here are the details:
Coldfusion is running on Windows Server 2003 Enterprise.
Using IIS6 for the web server on the same box.
I have several virtual directories setup that reference files on another server on the same network.
What I did to break things... I installed Apache (the latest release) along with PHP - but I set Apache up to listen on a different port (8080). Suddently any part of my code that tries to reference a file that is found through a virtual directory generates the following error:
An error occurred when performing a file operation exists on file /serverpdfs/130kPDFs/137485.pdf.
The cause of this exception was: org.apache.commons.vfs.FileSystemException: Could not determine the type of file "http://www.mybp-graphics.com/serverpdfs/130kPDFs/137485.pdf"..
Here's the actual code that generated that error:
<cfset filename = "http://www.mybp-graphics.com/serverpdfs/130kPDFs\137485.pdf">
     then within a table...
     <cfif FileExists("#filename#")>
    <td>Yes File</td>
    <cfelse>
    <td>No file</td>
    </cfif>
The "serverpdfs" is the virtual directory inside the website "mybp-graphics.com". If I look in IIS the directory is there, I can see all the files in it - it seems to be working fine.
I first experienced the problem when we tried to open a PDF for viewing by using <CFCONTENT> - the same type error occurs.
What is especially suspicious is that the exception was was "org.apache.commons.cfs.FileSystemException" - This error still persists even though I have done the following:
1. Completely de-installed Apache and hid the PHP directory.
2. Re-installed ColdFusion from scratch.
Any direction would be greatly appreciated - this error is affecting multiple modules of a website that is used constantly by both our customers and our internal employees.
If this should be posted in a different area of the forum please let me know.
Thanks
Curt

Sean,
Thanks for your reply - in regards to the "FileExists()" - I had set that up as a quick test and received the same error (essentially) as my primary code that is generating the eror. Below is the actual code that generates the error - along with the full output of the error message below;
The code calls another file to actually "push" the PDF I am trying to open - hopefully the code all makes sense. The CFSET code calculates the file name as files are stored in different sub-directories. This code has worked well for over a year.
As for the 500 error - I suspect that is a permissions issue - that folder is not publicly accessible - but it is to the coldfusion user account - and thus it serves it up.
Code:
------- Both the primary module and the called module ---
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>

          <cfquery name="qRandom" datasource="BPOffice">
              SELECT           OrderNum, Random
        FROM           JobOrder_Data.db
        WHERE   (OrderNum = #URL.fn#) AND (Random = #URL.rnd#)
    </cfquery>
<body>
          <cfif qRandom.RecordCount EQ 1>
        <cfset variables.MIMEType="application/pdf">
        <cfset variables.FileName = "http://www.mybp-graphics.com/serverpdfs/" & "#(Int(URL.fn/10000)*10)#" & "kPDFs" & "#URL.fn#" & ".pdf">
        <cfset variables.Displaytype="inline">
        <cf_pushfile
          FileName=#variables.FileName#
          MIMEType=#variables.MIMEType#
          DisplayType=#variables.DisplayType#>
    <cfelse>
           Error - no file found.
    </cfif>
</body>
</html>
======= Now the CF_PUSHFILE code ======
<cfset variables.FileToPush=attributes.FileName>
<cfheader
   name="content-disposition"
   value="#attributes.DisplayType#; filename=#attributes.FileName#">
<cfcontent
   type="#attributes.MIMEType#"
   file=#variables.FileToPush#>
==========END OF PUSHFILE CODE============
-----End of Code
Error:
An error occurred when performing a file operation exists on file /serverpdfs/130kPDFs/137623.pdf.
The cause of this exception was: org.apache.commons.vfs.FileSystemException: Could not determine the type of file "http://www.mybp-graphics.com/serverpdfs/130kPDFs/137623.pdf"..
The error occurred in C:/Inetpub/wwwroot/Paradox/open_pdf.cfm: line 38
36 : <cfheader name="Content-Disposition" value="inline; filename=#variables.ShortName#"> 37 : <cfheader name="Expires" value="#Now()#"> 38 : <cfcontent type="application/pdf" file="#variables.FileName#"> 39 : 40 :
Resources:
Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.162 Safari/535.19
Remote Address
192.168.0.16
Referrer
http://bpweb/paradox/ShowJobOrder.cfm?cfJobNumber=&CFGRIDKEY=137623
Date/Time
01-May-12 12:19 PM
Stack Trace
at cfopen_pdf2ecfm1312221362.runPage(C:/Inetpub/wwwroot/Paradox/open_pdf.cfm:38) at cfopen_pdf2ecfm1312221362.runPage(C:/Inetpub/wwwroot/Paradox/open_pdf.cfm:38)
org.apache.commons.vfs.FileSystemException: Could not determine the type of file "http://www.mybp-graphics.com/serverpdfs/130kPDFs/137623.pdf". at org.apache.commons.vfs.provider.AbstractFileObject.attach(AbstractFileObject.java:1305) at org.apache.commons.vfs.provider.AbstractFileObject.getType(AbstractFileObject.java:412) at org.apache.commons.vfs.provider.AbstractFileObject.exists(AbstractFileObject.java:402) at coldfusion.vfs.VFile.exists(VFile.java:230) at coldfusion.tagext.net.ContentTag.doStartTag(ContentTag.java:178) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722) at cfopen_pdf2ecfm1312221362.runPage(C:\Inetpub\wwwroot\Paradox\open_pdf.cfm:38) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:381) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66) Caused by: org.apache.commons.vfs.FileSystemException: HEAD method failed for "http://www.mybp-graphics.com/serverpdfs/130kPDFs/137623.pdf". at org.apache.commons.vfs.provider.http.HttpFileObject.doGetType(HttpFileObject.java:96) at org.apache.commons.vfs.provider.AbstractFileObject.attach(AbstractFileObject.java:1296) ... 36 more
As you'll notice I am getting the same "org.apache.commons.vfs" error as before.
Any further thoughts would be greatly appreciated.
Thanks
Curt

Exchange Server 2010 get error HResult = -2147024891 when Accessing Virtual Directories on CAS

I've just installed a Exchange 2010 server in an Exchange 2007 server environment.
The 2007 enviroment include two exchange server "Server-A" and "Server-B"
and "Server B" has dead on hardware issue for half year.
When I go to Microsoft Exchange On-Premises -> ServerConfiguration -> Client Access and receive the following error message
An IIS directory entry couldn't be created. The error message is Access is denied. . HResult = -2147024891 It was running the command 'Get-OabVirtualDirectory'
I try run the “Get-OwaVirtualDirectory” in powershell and get following result
From the power Shell command prompt .. Run
[PS] C:\Windows\system32>Get-OwaVirtualDirectory
An IIS directory entry couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I've google that i need to add "Exchange Trusted Subsystem" as a member in local admin group in Exchange 2007
but my exchange 2007 "Server-B" already dead, how should i fix it?
Appreciate for any help!!

re-create the new virtual directories does not work for me.
still got the error
An IIS directory entry
couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I don't understand why change new exchange server 2010 setting require me to have permission to access
my dead exchange server 2007

MySql connection to Win2003 virtual directories

CS3 PHP/MySQL local Dreamweaver running on Mac OS X 10.5,
remote
testing server running on Windows Server 2003/iis/PHP/MySQL.
The
example in the tech note of of IIS
http://localhost/warehouse/
does not work
for me. The only way I can get it to work is by putting the
_mmServerScripts
folder in the iis default site - any other setting returns a
401 permissions
error. The virtual directory is the live directory for the
site and has
appropriate permissions allowing http access and ftp access
but
Dreamweaver errors with 401.
1. Dreamweaver will work with the _mmServerScripts in a
folder that is not
the site home folder
2. The advanced site definition dialogues are unhelpful as
they do not reflect
what is going on and the error messages confuse the matter
I still have no idea why Dreamweaver is returning a 401 error
but it seems
that it does no support virtual directories in iis, which I
find hard to believe.
I feel I must be missing something.
Note: I don't want to use the default/root on this server
because it has
restricted access for another purpose.

dmartins wrote:
I think the problem here may be the NAT router. You might have to forward the range of ports specified as "PassivePorts" in the config file to the FTP server.
This may help: http://slacksite.com/other/ftp.html
Thanks man!
I got it working by uncommenting the PassivePorts and open them in the router.
/Neuwerld

How to create an IIS virtual directory programmatically?

All-
Is it possible to create an IIS virtual directory
programmatically using Coldfusion? Is there some set of server
objects that could be tapped into using COM, for example?
Any guidance would be appreciated. Thanks.
-Josh

You should be able to do this (as well as all other
administrative tasks) using CFEXECUTE, Windows Scripting Host, and
IIS management object. Read IIS documentation. It contains tons of
ready-to-use scripts.

Servlet, Tomcat 3.3, IIS virtual directory access denied

Hello people,
I've set up Tomcat to run as a service with a domain log on usr/pswd. IIS works fine redirecting servlet requests to Tomcat via ISAPI redirector. All on Windows 2000 Server.
The problem:
The java application creates and reads files from a location which corresponds to an IIS virtual directory and is also a local directory with respect to the Tomcat and IIS installation. The application is denied access to this directory when submitting a network path (\\server/drive/directory/) where to store and read files, but is happy when a local path is given instead (E:/) Why? The domain user should have complete access to this. Is it Tomcat, IIS, or java restrictions?
I appreciate any suggestion on this
Thanks

The problem would be with the logon that you have Tomcat running under. Writing to a file accessed by network share (\\server\share) is not a problem under Java as long as the logon has appropriate privileges. If you are writing to something of the form \\server\c$\directory, as it sounds like you might be, the logon may need administrator access to the box (in order to see \\server\c$).

Windows IIS virtual directories

Similar Messages

Maybe you are looking for