Windows Install Error

I am a new user to itunes, bought my mom an ipod for x-mas. Went to itunes and downloaded itunes 8 and tried to install. everytime I try to install I get this note "the installer encountered errors before itunes could be configured" . I have windows xp and have went to the support site for itunes and followed everything they suggested to a T. Still same error, please help.
Thanks in advance,
Russ

Hello, Anyone out there? Just a little help for a newb please!

Similar Messages

  • SSD's not working/ being detected - Windows install errors on HP Dv6-1149wm laptop

    Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
    The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
    The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs).  I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
    My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
    My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
    I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
    This question was solved.
    View Solution.

    Computer_World wrote:
    Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
    The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
    The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs).  I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
    My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
    My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
    I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
    Hi,
    I suggest to read this thread:
    http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/probook-6560b-does-not-recognize-my-SSD/...
    Your thoughts are exactly the same as mine. The motherboard doesn't like the firmware or the controller on the SSD.
    This manual says that AMD doesn't support SSD:
    http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Bootcamp - Windows install error

    I'm trying to install Windows 8 on my iMac using bootcamp.  Everything seems to be going fine until I format the bootcamp partition.  Then, the Windows installer gives me the error "cannot create or locate partition, see setup logs for details."  Any suggestions?

    So according to the FAQ, a thunderbolt device can cause this error.  I don't have any thunderbolt devices.  On a whim I unplugged my external drive and the installation went through with no problems.

  • MSI Neo Combo Windows install error

    When I try to install windows xp professional I keep getting a re-ocuring error.
    Stop: 0x0000007e (0xc0000005, 0xf748e0bf, 0xf78da208, oxf8d9f08)
    Pci.sys - Address f748e0bf base at f7487000, Date Stamp 3b7d855c

    Please give us a complete listing of the hardware in your system including the PSU and the amp ratings for the +3.3, +5, and +12V rail(s). See my signature as a guide and read >>The Posting Guide<<.  What service pack version of XP is this? 

  • Fresh Windows Install Error

    For a while, I had the new Haswell rMBP triple-booting Ubuntu, OSX, and Win 8.1 all on pure EFI, but then I screwed it up with an update-grub. At the moment I'm trying to redo things and have a completely wiped drive, a Win Install USB and an Ubuntu Install USB. I'm trying to freshly install Windows but it's giving me the classic "windows could not update the computer's boot configuration" after installation. I'm installing with EFI, which I know is possible because I've done it before, and my disk is GPT with a protective MBR, which Windows should like. I've tried having manually setting up the EFI/System/Win partitions with Windows, with gparted, and by letting Windows set them itself, but it always gives the error.
    Does anyone know what exactly Windows is wanting that I don't have? Also, what's not really an option is installing OSX and using bootcamp or disk utility. OSX tries to slap on a hybrid MBR which really gets mucky really fast when adding more partitions, and it doesn't play nice with anybody.
    Thanks

    I really don't know the ICH5 well enough to determine if there is an optimal reason why you select the PATA only or the SATA only to match the primary boot device. In the boot sequence you can boot in whatever order you want, and with the F11 key you can boot off whatever device you want. Whatever works is usually OK, but when things don't work, try the right way at least once  

  • Mini WAS 6.20 for Windows Installing Error

    Hello!
    I've tried to install MINI WAS, but before the second CD (Data CD 1) finished I got the following error:
    19720 INFO: XSERVER started
    INFO 2006-06-03 11:04:27
        Extracting the Database-Dependent SAP system Executables
    INFO 2006-06-03 11:06:31
        Extracting the Database-Dependent SAP system Executables
    WARNING 2006-06-03 11:13:14 EXTRACTSAPEXEDBDATA2 InternalInstallationDo:0
        SAPCAR returns with error 4.
    ERROR 2006-06-03 11:13:14 EXTRACTSAPEXEDBDATA2 InstallationDo:0
        Phase failed.
    ERROR 2006-06-03 11:13:15 Main :0
        Installation aborted.
    There was a problem during install.
    Try to solve the problem and restart the setup with this batch.
    Has someone made the same experiences and can give me a hin?

    Hello now i have copied all CDs on Harddisk but the INSTGUI show the following error message:
    INFO 2006-06-03 16:30:41
        Setting new Rundirectory.
    Error! Do not mix installation root and instance name!
    ERROR 2006-06-03 16:30:42 ADADBREGISTER_IND_ADA ExecuteCheck:0
        Exit code from c:sapdbprogramspgmdbmcli.exe: 2.
    ERROR 2006-06-03 16:30:42 ADADBREGISTER_IND_ADA InternalInstallationDo:0
        Phase failed.
    ERROR 2006-06-03 16:30:42 ADADBREGISTER_IND_ADA InstallationDo:0
        Phase failed.
    ERROR 2006-06-03 16:30:42 Main :0
        Installation aborted.

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • Windows 7 64-bit instal error on new ST9750420AS Momentus HD in HP Envy 15

    windows 7 64-bit installation error on brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in HP Envy 15 
    I installed a brand new ST9750420AS  Momentus 3Gb/s 750-GB Hard Drive in my HP Envy 15 laptop, and I was getting an error in the last installation step of Windows 7, 64-bit, ultimate, indicating that Windows could not support or be installed on the computer hardware.  It turns out that the drivers for the new internal hard drive, need to be installed/loaded during the initial windows install.
    the drivers that ended up working are available from intel at:
    RST Driver Files v.10.1, 64-bit
    the steps that are requires are:
    1) download the f6flpy-x64.zip file above, and unzip to a usb pen-drive
    2) when installing windows 7, in the configure option of the volumes, even if windows appears to recognize the drive, it is recommended to delete all existing volumes (Advanced options), and then LOAD DRIVER, and BROWSE to the usb pen-drive, while indicating to only list drivers that are compatible with the hardeware.  here is quick list of similar steps with diagrams.
    3) in this case the compatible driver name is "INTEL MOBILE EXPRESS CHIPSET SATA RAID CONTROLLER¨
    4) continue to configure volumes, and installing windows 7,
    5) everything should work fine.

    Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.   
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
    If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Windows 7 64bit Install error microsoft.vc80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b3 b9a1e8e3b",processorArchitecture="amd64"

    How do i fix this install error.  Very fustrating. 

    Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.

  • Windows 7 install error 0x80300024

    Mac Pro with 4 internal hard drives. My primary startup drive (in bay #1) has 10.5 on it.
    Wanted to install Windows 7, so needed Snow Leopard's Bootcamp to do that. The fourth hard drive in the machine was new, so wiped that, installed Snow Leopard, then used Boot Camp Assistant to add a partition to that drive for Windows.
    Started the Windows 7 install (32 bit). Got to the screen where you choose which volume it will be installing onto, and selected the "BOOTCAMP..." labeled one. Pressed the Next button, which is where I encountered the 0x80300024 error.
    That is, it said something like "Windows cannot be installed onto this drive. Error 0x80300024."
    Found some posts here on the Apple forums, from The Hatter, advocating removing all the other hard drives when trying a Bootcamp install. The jist of it was, remove all other OS X system drives, or Windows gets confused about its install location. And, while you're at it, might as well pull ALL your other drives before the install for safety (so in my case, that meant the 10.5 system drive from bay #1, plus data drives from bays 2 and 3).
    So I did that, re-ran the Boot Camp Assistant in Snow Leopard, having it start with the install. Now the Windows 7 install is going forward.
    THANK YOU to THE HATTER!
    It is a shame that nowhere on their support pages does Apple acknowledge install error 0x80300024. They really ought to add that to their Knowledge Base page on Boot Camp/Windows 7. That page is here: http://support.apple.com/kb/HT3986

    Also, note that I would have added my comments to one of the threads where The Hatter had given his advice, but they are old enough to be closed for new comments.
    Besides, it seems like a good idea to have a thread with the error code (0x80300024) in the subject line.

  • Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*

    Greetz,
         I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF050, DW063 ... WARNING: DF029 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 1 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    ERROR: DF050: ARKServiceControl::ModifyService failed while saving previous service configuration.(Seq 6)
    ERROR: DF050: ARKServiceControl::ModifyService failed for service SwitchBoard. Error 2 The system cannot find the file specified.(Seq 6)
    ERROR: DW063: Command ARKServiceControlCommand failed.(Seq 6)
    ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 3(Seq 1)
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 1 Exit Code: 3 Service Specific Exit Code: 0(Seq 1)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
    My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
    Thanks in advance.

    Thank you for the reply. I will try the steps listed in the document you linked me to. In case any of the procedures works, I will mark your post as "Correct".
    Thank you, once again.

  • Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

    hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
    Please could someone help???
    And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
    Thanks alot! I really appreciate your help..

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

    Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

    Please repost in a VMWare Fusion forum, you can find it at:
    http://communities.vmware.com/community/vmtn/desktop/fusion.

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • I can't install itunes for windows get error message 5

    i can't install itunes for windows get error message 5

    I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
    BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

Maybe you are looking for