Windows install fails at 75% completion

760GM-P34fx motherboard, AMD PhenomII X4 965e processor. I built this computer about a month ago with a different motherboard and it has been running Windows 7 flawlessly, no problems. I decided to upgrade to the MSI motherboard. All appears normal in the bios and it shows the CPU, etc in the bios system information screen. When I install Windows 7, the installation proceeds through all steps to part way through the final "Completing Installation." It completes "Setup is updating registry settings" and "Starting services." It then does a restart. The Windows splash screen comes up, but instead of the OS coming up, it simply goes to a black screen, and does the same on any further restarts.
All of the hardware has been operating normally for Windows 7 for the past month, except the new motherboard.
Any ideas? Any help appreciated!

That diagnosis fit the symptoms, but-- guess what, with a new Asus M5A97 R2.0 board installed, I have exactly the same problem, and this board supplies up to 140 watts. Everything looks good as reported in the bios, running cool temps, 4 cores at 3400Mhz, etc. And XP still running without a hitch.
More specs:
Graphics: Radeon HD4850
RAM: 2x 4 Gb Crucial (Micron) DDR3 1333
HD: 160Gb Seagate ST3160023AS
Power supply: Seasonic SS-500HT (500 watts)
At this point it's clearly not an MSI problem, but you seem very knowledgeable so I hope you (or anyone else with an idea) will help with this further. Since my first post here, I've: tried a Win 7 64 install from another source, (same result) removed one of the two ram chips, removed one of two hard drives, and run a diagnostic on the ram, which came up normal. Any further ideas? I keep thinking it may be a driver issue, but this is all mainstream hardware that should be supported well enough to do an install before any further driver updates.
Thanks much for any input!

Similar Messages

Windows Install fails to detect VSTO 4.0 in Windows machine

I’ve to install excel based application developed in VS 2010.
Windows installer fails while detecting VSTO in Windows 7/8/8.1. Its perquisites are .Net framework 4.0 client frame work and VSTO 4.0.
Even we have installed VSTO manually and re-run our setup and again we are getting the same error (“Installer was not able to automatically download the VSTO installation”), the custom message. Don’t know what is blocking to detect VSTO on some particular
machine. I'm using only this condition "VSTORUNTIMEREDIST>="10.0.30319" as in Launch Conditions from last 3 years.
Now from last couple of months I'm getting this error when instating my application, somehow when I add another condition i.e. VSTORUNTIMEREDIST>="10.0.30319" OR OFFICERUNTIME>=”10.0.21022”, it works properly.
I want to know that is there any windows patch is released due to which my installer is not able to detect VSTO in machine.
Thanks in advance.
Thanks Utshek Jain

> Is VSTO Runtime detection depends on full edition of .NET framework?
I have never seen the client profile mentioned in MSDN. For example, take a look at the
Running Solutions in Different Versions of Microsoft Office article which provides the following info:
Version of Office targeted by the project template
Target .NET Framework of the project1
Versions of Office that can run the solution
Required runtime on end user computer
Office 2013
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 3.5
Office 2013
Office 2010
Visual Studio 2010 Tools for Office Runtime
2007 Microsoft Office system
.NET Framework 4,
.NET Framework 4.5,
or
.NET Framework 3.5
Office 2013
Office 2010
2007 Microsoft Office system
Visual Studio 2010 Tools for Office Runtime
BTW Did you include the required interop files in the installer?

Hp windows recovery disk for windows 7 failing at 84% completion

Hello,
I have a HP Pavilion dv71-4100. The hard drive failed so i purchased a new one and am now trying to reinstall windows through the three disks I got through HP.
Disk 1 work fine all the way through. I then insert disk 2 when prompted and it begins working properly. At 84% it stops and eventually pops up an error message (something with the C drive).
Any ideas what I can do?
Thanks,

Hi,
I've seen this error when the replacement HDD has a smaller capacity than the original, or it could just be a problem with the Recovery Media.
Either way, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - most likely Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source. To avoid possible errors, it's best to burn the ISO at the slowest possible speed.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

BIP 10.1.3.3.1 Windows install fails if path contains spaces

Hi
A quick note to all who might be installing the latest BIP 10.1.3.3.1 windows.
I had the install media in a directory:-
C:\Software\Oracle BI Publisher 10.1.3.3.1\Windows\Oracle_Business_Intelligence_Publisher_Standalone
Running the Setup.exe.fails every time....
I moved it to directory:-
C:\Software\Oracle_Business_Intelligence_Publisher_Standalone
and the install runs ok..
(This might be a general issue with all Oracle Universal Installers, but it's quite annoying! ;( )
Happy BIP'ing with 10.1.3.3.1!
Mike

OK, the problem was ... in missing colon after "thin" -
jdbc:oracle:thin:@123.456.7.890:1521:ABC

Mac Mini 2012 BootCamp Windows install failing

Hello,
I have the new 2012 Mac Mini (model Macmini6,2). I'm having difficulties installing Windows 7 with Bootcamp.
I run the Bootcamp Assistant which successfully creates a Windows 7 install disk (on a USB drive). It also successfully downloads the latest windows support software and puts it on a different USB drive. The hardrive partition options come up and after selecting the desired partion layout the system reboots and starts booting the Windows installer. This is where things go wrong...
The Windows installer is unable to recognize my installed hard drive. It asks for additional drivers and regardless of what drivers I select from the Windows support files it never is able to see the hard drive, and therefore can't continue with the installation.
Has anyone else had this problem?
Thanks,
Bill

Well, the first time I did format the BootCamp partition with Win 7, just like I did for the Win 8 install previously, and I still got the error.
But I just tried again after a reboot, and the Win 7 install worked this time.
But the partitions listed were different this time. Previously Windows displayed partitions on 2 disks (disk 1 and disk 2), but this time it only displayed one disk. So something changed between the first time I tried it and this second time.
After the failure the first time, I read some discussions on the Fusion drive, and it appears that the Boot Camp partition is created on the mechanical drive only, and that if you use Boot Camp / Windows, you will not gain any benefit from the SSD or Fusion architecture. If this is accurate, it is a bummer.

Adobe acrobat pro 9 install failed

I installed adobe acrobat pro 9 right at the end it gives me a installed failed. then it complete and says your installed is complete. but it crashes all the time
I tried to repair it from the help menu same thing happens install failed. then install complete. when I do an update same thing happens it fails then complete.
I have uninstalled it and used the cleaner and reinstalled with the same problem.

We cannot know. You are not offering any system information or any details about the error messages.
Mylenium

Essbase Client 32 bit v 11.1.1.3 on windows XP computer - Install Fail

Essbase Client 32 bit v 11.1.1.3 install fails on Windows XP, similar install seemms to be working for several users, its failing on one particular user install.
error seems to be related to com.hyperion.install.util.ConsoleUtil, ERROR, Can not find string, that run java, any ideas on resolving the issue
Install Log
(May 25, 2010, 01:36:11 PM), com.hyperion.install.wizard.Main, INFO, Installer Version: 11.1.1.3.0.3663
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Trying to replace System.out and System.err..
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.DeferredOutputStream, INFO, DeferredOutputStream created.
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.LoggedOutputStream, INFO, LoggedOutputStream created.
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.DeferredOutputStream, INFO, DeferredOutputStream created.
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.LoggedOutputStream, INFO, LoggedOutputStream created.
(May 25, 2010, 01:36:11 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Replaced System.out and System.err.
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking if the file exist: C:\essbase11\assemblies... Ok
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking if the file exist: C:\essbase11\help... Ok
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking if the file exist: C:\essbase11\jre... Ok
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking if the file exist: C:\essbase11\oui... Ok
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking if the file exist: C:\essbase11\setup.jar... Ok
(May 25, 2010, 01:36:11 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Check assemblies:
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_product_reporting_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_financial_reporting_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_financial_reporting_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_interactive_reporting_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\tools... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hpm... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_financial_reporting_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hfm_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_migration_utility... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbaseAddins\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_dds... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hfm_common... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\analytic_services_provider_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_administration_services_client\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\planning... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_product_reporting_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\svchve_client\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hfm_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_integration_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\offlinePlanning... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\aif... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\calc... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\bpm_architect_datasync... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\workspace_configlibs... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_smartsearch_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\bpm_architect_batch_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\productCommonComponents... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hsf_server... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hps_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\bpm_architect_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_product_reporting_common... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\fdm... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hsf_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_financial_reporting_common... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\bpm_architect_generator... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_webanalysis_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_workspace_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_client\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\sharedServices... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hsf_reader_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_portlets_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_studio\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_configlibs... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\commonComponents\9.5.0.0\assembly.dat... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_core_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbaseProductCommonComponents... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_studio_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\biplus_interactive_reporting_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\bpm_architect_services... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\hfm_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\essbase_administration_services_webapp... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\svc_client... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, C:\essbase11\assemblies\rmi... Not exists
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Result of checking assemblies: Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking environment variables... Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking user home...Ok
(May 25, 2010, 01:36:12 PM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking user is admin... Ok
(May 25, 2010, 01:36:22 PM), com.hyperion.install.wizard.Main, INFO, Selected locale: en_US
(May 25, 2010, 01:36:24 PM), com.hyperion.hit.wizard.Wizard, INFO, Starting wizard.
(May 25, 2010, 01:36:24 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:WelcomeWizardState
(May 25, 2010, 01:36:33 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:DestinationState
(May 25, 2010, 01:36:37 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallTypeState
(May 25, 2010, 01:36:40 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:FeatureSelectionState
(May 25, 2010, 01:37:13 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallTypeState
(May 25, 2010, 01:37:14 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:FeatureSelectionState
(May 25, 2010, 01:37:20 PM), com.hyperion.install.context.DiskSpaceCheck, INFO, Required disk space: 1100
(May 25, 2010, 01:37:21 PM), com.hyperion.install.context.DiskSpaceCheck, INFO, Free desk space: 2164
(May 25, 2010, 01:37:21 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallConfirmationState
(May 25, 2010, 01:37:23 PM), com.hyperion.install.wizard.impl.SummaryToInstallRule$1, INFO, Sending stdout/stderr logs to C:\Hyperion\logs\install
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Trying to create log files for stdout/stderr in directory: C:\Hyperion\logs\install
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.LoggedOutputStream, INFO, Trying to set logStream..
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.DeferredOutputStream, INFO, Trying to set backingStream..
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.DeferredOutputStream, INFO, Setting backingStream: succeeded.
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.LoggedOutputStream, INFO, Setting logStream: succeeded.
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.LoggedOutputStream, INFO, Trying to set logStream..
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.DeferredOutputStream, INFO, Trying to set backingStream..
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.DeferredOutputStream, INFO, Setting backingStream: succeeded.
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.LoggedOutputStream, INFO, Setting logStream: succeeded.
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Created log files for stdout/stderr.
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, stdoutLogLocation = C:\Hyperion\logs\install\installTool-install-stdout.log
(May 25, 2010, 01:37:23 PM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, stderrLogLocation = C:\Hyperion\logs\install\installTool-install-stderr.log
(May 25, 2010, 01:37:23 PM), com.hyperion.install.action.InstallActionBuilder, INFO, Installation Type: New-Components
(May 25, 2010, 01:37:23 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallationState
(May 25, 2010, 01:37:56 PM), com.hyperion.install.action.impl.InstallCheckMessageHandler, ERROR, Installation check "diskspace" failed
(May 25, 2010, 01:37:59 PM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for commonComponents is fail
(May 25, 2010, 01:37:59 PM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseAddins is fail
(May 25, 2010, 01:37:59 PM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseClient32 is fail
(May 25, 2010, 01:37:59 PM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for smartViewHveClient is fail
(May 25, 2010, 01:37:59 PM), com.hyperion.install.action.impl.OUIExecAction, INFO, Creating Oracle inventory.
(May 25, 2010, 01:37:59 PM), com.hyperion.install.util.ConsoleUtil, ERROR, Can not find string, that run java
(May 25, 2010, 01:38:00 PM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallSummaryState

HI,
XP is not compatible, and I would strictly recommend all to use a compatible OS like 2003 ..etc. For the complete information of the compatible platforms
Here is the link
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

Windows 7 install failing on brand-new Apple-replaced harddrive

I just got my (8-week-old) computer back from Apple, with a brand new hard drive. Before restoring all my files, I figured I'd get Boot Camp installed so the partitions are set, etc.
Every time I try, the Windows 7 install fails about 10% of the way in, with either a 0xC0000005 error (installation sources are unaccessible) or a 0x80070005 error (the only Apple support document about this talks about an upgrade from Vista, which isn't what I'm doing).
Reading posts, I disconnected my USB hub, and this time I got a BSOD with this error:
iRQLNOT_LESS_OREQUAL
In between tries, I used Disk Utility to remove the boot camp partition, and reset my Mac partition to use the whole drive, so that I could start cleanly with Boot Camp Installer. The one time I tried to launch in Windows and repair, it brought me to the "click any key to launch from DVD" but hitting a key did nothing.
I've installed Boot Camp and Windows 7 twice before with this install DVD, and multiple other times with other DVDs/computers.
Ideas? I'm thinking there's something other than a bad hard drive that was wrong with my computer.

Only by either installing Windows on your iMac as a separate partition through Bootcamp, or setting up a virtual Windows machine via the likes of VMWare Fusion, or Parallels Virtual or Desktop.
Factor in the cost of Windows and I think you'll find a new copoy of Mac Photoshop Elements would be cheaper.
You could also try the excellent Graphic Converter from lemkesoft, or the open-source Gimp,

Component install failed error message installing CS3 on windows xp

Trying to install CS3 from original DVD on to XP professional computer. Install completes with notice of Errors 5 components and under each component such as Flas CS3 it says "Component install failed" How do I overcome this problem. Have tried all solutions in help to no avail.

Installation and Licensing Problems
Read the part about CS3 exactly and try again...
Mylenium

Windows 7 iPrint printers not completely installed

Good day!
We are having a problem right now where printers pushed out by Zenworks policies and iPrint are not getting completely installed. A user will try to print and it will not. The only way to get it to work is to right-click the printer object in the Devices and Printers window and click "Printer Properties". At that time, a window will come up saying that the driver for such and such printer is not installed and will ask if you want to install it now only to click Next Next Finish and voila! The driver was downloaded to the computer with the policy and the object was created but it's as if the printer install wasn't quite complete. I've seen this problem intermittently in the past but now that we're doing our summer re-image in our school district, I'm seeing it a lot more. Any ideas as to what might be causing this and what I can do to resolve it? Thanks in advance!
Windows 7 64-Bit
Zenworks 11.3

No - but you should download/install ThinkVantage System Update (for Windows 7) and have it download and install the proper T43 drivers for Windows 7. Then you'll have sound. :^) That's what I did for my T43. All works fine.
Life is just one big "Beta Test"
Happy owner of a T43 (Windows 7) and T23 (Windows XP)

Windows 2008 R2 install fails on ProLiant MicroServer G7 N40L

The system has 4 x 2.5SATA drives. I have tried RAID10 and RAID1. Used a 500GB partition for the Windows install. Every time the install gets all the way to the end of the initial install after it completes copying the Windows files and it about to reboot when I get:
Windows could not prepare the computer to boot in the next phase of the installation. To install Windows, restart the installation.
This has happened 3 separate times all at the same place. What am I missing here? Is there some incompatability issue with Windows 2008 R2? The system has 2GB of RAM. I can't tell what kind of memory it is (ECC, non-ECC, etc.)
Thanks, Michael

Hi, Michael:
You may also want to post your question on the HP Business Support Forum -- Proliant Servers section.
http://h30499.www3.hp.com/t5/ProLiant/ct-p/proliant

Re-install of CS3 on Windows 7 Fails

Greetings.
Out of the blue all the programs in CS3 stopped working on Windows 7. I received the message stating that the licensing stopped working. After an chatting with a tech and going through the license recovery tool, and all the other options he gave...I was advised to un-install and re-install. I un-installed, also I used the CS3 cleaner tool. When I go to re-install, I'm prompted with the message: "The file AdobePDF.dll is needed". I Googled the meaning of this and followed instructions found on Adobe's site. I was able to locate and copy the AdobePDF.dll to my desktop and tried to browse to it in order to continue the install. However, every time the install fails. There is no specific error given on the failure.
I tried chatting with a tech about this but received the classic "I'm sorry, since you are facing an issue with Design Premium CS3 and the latest version is Design Premium CS5.5, we're unable to provide Chat or Phone support for your product".
I do not want to be forced upgrade as this is not cost effective. We paid good money for this software and expect that it works. I'm not using any goofy third party registry cleaners nor have I made any changes to my OS. I've seen other people have this issue, but no solutions were posted. If someone could reply to this I would be grateful as I have wasted now two days.
Regards,
Dave

You have installed a newer version of Acrobat/ Reader and its messing with your CS3. Uninstall each and every shred of Adobe software, delete the caps.db and then try again.
Mylenium

Installing InDesign CC 2014 on Windows 7 fails with error EX11 (error extracting to temporary folder).

@

Hi Jeff,
I finally resolved the problem. I was trying to install CC 2014 on a 32 Bit system not being aware that CC 2014 is 64 bit only!
Thanks for your help
Jo
Am 24.07.2014 um 19:13 schrieb Jeff A Wright <[email protected]>:
Installing InDesign CC 2014 on Windows 7 fails with error EX11 (error extracting to temporary folder).
created by Jeff A Wright in Creative Cloud Download & Install - View the full discussion
Jolauterbach the error indicates that your User account is not able to properly write to the temporary directory. Please make sure you have sufficient disk space and proper rights to modify the temporary directory.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6580278#6580278
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

"Component Install Failed" for CS3 on Windows 7

For reference, I have a Lenovo X200 Tablet PC, running Windows 7 and Creative Suite 3 Design Standard.
Last Friday, 9/23, I tried opening Illustrator and received an error message that told me to uninstall then reinstall the program. I received the same error message with InDesign and Photoshop. All three programs had, up to this point, been working fine.
I uninstalled CS3, restarted my computer, and attempted to reinstall. The shared components installed fine, but Illustrator, InDesign, Photoshop, Version Cue, etc. did not install, and gave me the "Component install failed" error message.
I went through the list on this Support page.
I tried all of the Solutions except the ones based upon Windows Event Viewer error numbers (as my Event Viewer didn't show any of the listed numbers).
I didn't install any updates or download anything between the last time CS3 worked and when it failed on Friday, so I'm not sure what caused it to fail in the first place.
If anyone has any suggestions or advice, I'd appreciate it.

I spent the entire day trying and repeating all of the suggestions found in the forums.
My last effort resulted in a successful install CS3 Illustrator. I didn't try to install the rest of the suite.
You can search for the details on how to do some of these steps -- they are all in both support and in the forums.
I uninstalled CS3.
Using control panel I uninstalled every other Adobe program - flash, air, extendscript -- anything Adobe,
I ran the Creative Suite Cleaner tool as administrator
I did a couple of passes of registry cleaner - I used CCleaner
Then I manually deleted leftover adobe files and folders. Some were read only, but I changed the setting and deleted anyway
Then I ran another 2 registry cleaner passes
I rebooted
Ran CS3 install as administrator
I opted just for Illustrator
And I prayed!
It worked for me. (I will say that installation looked despressingly similar to all the failed attempts of the day.... slow and forever on the install of shared components, but then in the last 5% it did move on of the installation to Illustrator! And to my utter shock it installed successfully)
Hope some of this helps.

Windows install fails at 75% completion

Similar Messages

Maybe you are looking for