Windows Installation Error after Full Recovery

Hi,
I upgraded a Satellite A135-S4656 from a 160GB hard drive to 320GB hard drive. I did a full recovery with the recovery cd's. At the end of the recovery, I the following message:
"Windows setup could not configure windows to run on this computer's hardware"
After saying ok to the message above and rebooting. I get to the Windows Vista splash screen and then i get the following message:
"Windows could not complete the installation. To install Windows on this computer, restart the intallation."
I ran the recovery once again and went through the whole recovery - still get the same messages.
Your help with this will be appreciated.
Hard drive info
Toshiba 320GB 2.5 SATA HDDR320I02X

if you know how to partition the hdd try to split that hdd into two 50/50 and re-run system recovery again.
=========================================================
the only easy day was yesterday.....
=========================================================

Similar Messages

  • Windows Installer Error after downloading Adobe Elments 9

    I downloaded your Adobe Photoshop Elements 9 about ten days ago and immediately after downloading I received two  Pop UP  problems that I have been unable to resolve.  One of the problems Is 1) I get a "Windows Installer"  popup each time I start my computer and 2). Windows
    Hoist has stopped working.
    I have researched all resources and find the only solution is to wipe my computer clean and reinstall everything.
    My computer is a HP Pavillion dv8000, Windows Vistaa 32 bit, SP 2.
    Please advise if you  or any other member has efxperienced a similiar problem.
    Thank you in advance for your help in this issue.
    Sincerely,
    Charles Higginbotham

    Boot Windows in safe mode, uninstall PSE.
    Mylenium

  • SCVMM Installation Failed: vmmServer.msi failed with Windows Installer error 1603.

    Error seen when attempting to install Microsoft System Center 2012 R2 Virtual Machine Manager 
    Installing D:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
    See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
    Searched the log file for 1603 errors - 
    CustomAction EnableWsmanCredSSP returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (B8:20) [02:00:47:180]: Note: 1: 2265 2:  3: -2147287035 
    MSI (s) (B8:20) [02:00:47:180]: Machine policy value 'DisableRollback' is 0
    Action ended 2:00:47: EnableWsmanCredSSP. Return value 3.
    SI (s) (B8:20) [02:00:47:228]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Server (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
    or error status: 1603.
    I've tried disabling my Firewall and troubleshooting the Enable-WSManCredSSP command-let however nothing has worked and I'm quite stuck. 
    Any help would be appreciated. 

    I had the same problem in my environment.
    Here are the steps how i did solve this issue
    Since VMM 2012 R2 Requires ADK 8.1 and this requires SQL 2012 Express.
    In order SQL Server 2012 to be installed successfully .Net Frame Work 3.5 feature on Windows Server has to be enabled first, in this case it is not not being installed by ADK Installation wizard as a result SQL service fails to start, which results on VMM
    installation to fail.
    Please try to enable .Net Frame Work 3.5 feature on Windows Server 2012 R2 before you install ADK 8.1

  • Windows Installation error message a required ressource can not be located: ms visual c  2005

    no idea what to do. please help me!

    Am 04.11.2014 21:48, schrieb Jeff A Wright:
    >
          windows Installation error message a required ressource can not
          be located: ms visual c  2005
    created by Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
    Download & Install/ - View the full discussion
    <https://forums.adobe.com/message/6899407#6899407>

  • My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

    I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
    Where on earth is Tools anyway?
    When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

    tools is at the top of the apple updater but dont get your hopes up

  • ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

    iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
    Downloaded latest version onto desktop. Will not complete install.

    Many thanks.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Trying to download update to iTunes in Vista but get Windows installer error. How do I update?

    Trying to download update to iTunes but get Windows Installer error.  How do I correct?

    many thanks.
    "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor."
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more info

    I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
    Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
    The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
    I've attempted to repair my .NET framework, didn't help.
    I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
    neither one fixed the error.
    Any help? Anyone else run into this error? What should I do?
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
    id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    SQL Server Setup has encountered an error when running a Windows Installer file.
    Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
    id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
    Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
    BUTTONS:
    &Retry
    Cancel

    Hi Gurmo,
    HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
    KB article.
    I suggest you run the System Update Readiness tool and check if the error still persists.
    There is a similar thread for your reference.
    https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • Oracle 11G database for 64 bit windows installation error

    Hi,
    I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

    Adipur wrote:
    Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
    Re: Oracle 11G database for 64 bit windows installation error
    Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
    I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
    Edited by: EdStevens on May 15, 2013 7:03 AM

  • Adobe Acro 8: Update of AcroPro.msi on AIP fails with windows installer error.

    Hi,
    Creating a AIP with Adobe Acrobat 8 files.
    Have created a AIP without any problems.
    When i try to add patches to the AIP using the MSIEXEC /a "" /p "" i get a Windows Installer error saying:
    "This package could not be opened. Verify that the patch package exists and that you can access it, or contact tha application vendor to verify that this is a valid Windows Installer patch package."
    What can be the cause of this?
    The update packages are fresh downloads from Adobe.com.
    Using WinXP SP3 with Windows Installer 4.5.

    I hope you have gone through the solution posted on http://kb2.adobe.com/cps/498/cpsid_49880.html

  • Can't download itune 10.5. it says window installer error occurs while i was installing . what should i do???

    can't download itune 10.5.
    it says window installer error occurs while i was installing it.
    what should i do?? i tried everything. i just can't download it.

    I have the same problem, PC with windows 7 and 64 bit.  Don't know how to fix yet

  • ICloud for Windows Installation Error Windows 8.1

    Updated to IOS 8.0 on iPhone and iPad. Cannot get Contacts from these devices onto PC. Tried removing iCloud and reinstalling but keep getting "iCloud for Windows Installation Error".  Data Files in Outlook shows iCloud but states it is Not available.  The following error codes are in the error report:
    Error: 0x80070005: DataProviderRegistered
    Error: 0x8007005: ZebraMapiCopySession::CanCreateZebraStpre:  CreateMessageService failed

    Nothing?  Nobody....  

  • I purchased the Iphone 4s yesterday. every time I try to download newest version of Itunes i get a windows installer error message. I went to microsoft and downloaded everything can anyone help?

    I purchased the Iphone 4s yesterday. Every time I try to download newest version of Itunes I get a windows installer error message. I went to microsoft and downloaded all I could please help

    Another Vista Victory!!!  Try uninstalling iTunes, then download and install it again.  Make sure Vista is up to date.

  • I cannot install the latest version of iTunes on laptop (windows xp). I receive a windows installer error message. Not having any issues installing any other software.  Was having no issue syncing w iPhone. Made the mistake of uninstalling prior version.

    I cannot install the latest version of iTunes on my laptop (windows xp). I receive a windows installer error. Am not having any problem installing other software or syncing w iPhone.  Made the mistake today of uninstalling my older version and not cannot install new.  Need new version in order to sync w new iPad.
    Any help would be appreciated.

    Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

Maybe you are looking for

  • My Skype Will Not Open, HELP

    Ok, I need help, this problem happend a couple weeks/months ago but I dealt with it up until now, my Skype will not open I only see a Skype Window when I log out, but only a tiny fraction of it, I tried Restore, Maximize, and move but none of these h

  • Setting the Audit Level to off

    Hi, I had configured the Audit level for a bpel composite to Off with the help of below property in composite.xml and deployed the same. <property name="bpel.config.auditLevel">Off</property> The Property also reflects in the SystemMBeanBrowser for t

  • Nilon D5000 RAW Files

    Unable to import RAW (NEF) images from new Nikon D5000. Using iPhoto 6.0.6 and OS X 10.4.11 and Photoshop Elements 6. Do I need later iPhoto and newer OS, not to mention a Photoshop Elements upgrade?

  • Error in Source list creation

    Hi, When i am trying to create a Source list for the material with vendor in the given Pruchase organisation, i am gettign an error "Vendor does not have purchasing data" . Pls suggest me what i do to avoid this error and create source list Thanks

  • Jtree startEditingAtPath cannot work

    I want my JTree to be always automatically goes into editing mode everytime a node is selected. I have add a treeselectionlistener that will initiate startEditingAtPath everytime the tree selection changed. However, the celleditor just won't show. He