Windows installation problem with Bootcamp

Since a few days I have a new iMac 21,5 (end 2013) Maverick latest version installed as I had on my "old iMac" I tried to instal Windows 8 or Windows 7.
Use the bootcamp and set the right size for my windows part, and download the drivers all goes well. After the iMac reboot comes up with the setup from Windows
ask the keyboard settings and than shows the partitions. Select partition 4:BOOTCAMP. Here starts the problem, I do not see the advance drive options, as also the "NEXT" button is not selectable. As I format the partion also "NEXT" button is not selectable. I am stuck here, please help :-)

I got stuck with the same error and spent a long time trying to work this out. It turns out that the issue is your USB3 stick. I'm not sure how it gets so far into the installation, but it seems that the USB3 drivers aren't available to the Windows installer.
Try again with a USB2-only drive and you should find that Windows will install fine.

Similar Messages

  • WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

    Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

    halimsujanto wrote:
    Hi all..
    I am having the same problem with desktop software 6, but my problem is more like this..
    http://www.blackberry.com/btsc/KB19300
    The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
    In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
    I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
    PS. Bifocals..
    The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
    Please if there is other link that may be good for my problem.
    Thank you very much.
    Hi ihalimsujanto and welcome to the forums!
    My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
    Please post back with as much detail as possible regarding your hardware and software setup.
    Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
    Thanks.
    Bifocals
    EDIT:
    ihalimsujanto,
    Please review this Microsoft Knowledgebase  Article ID: 555175
    How to resolve Common "Windows Installer" Problems
    Methods 3 and 4 may be pertinent.
    Let us know how it goes!
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Windows Installation impossible with BOOTCAMP - keep getting BSOD

    Hello Community,
    I am facing a huge problem. Countless times I have been trying to install Windows 7 64 Bit on my Macbook Pro via Bootcamp now.
    I had it working a few months ago, then the Windows installation kept getting blue screens so I decided to remove it and reinstall. But I can't.
    The problem is that I keep getting a Bluescreen right after the installation is at the point where there is only a black screen and a grey loading bar, above written: "Windows is loading files."
    Right after I get the Bluescreen. I dont even get to see the menue in which i would have to select a hard drive etc.
    The Bluescreen says: PAGE_FAULT_IN_NON_PAGED_AREA and Error Code: STOP: 0x00000050 or sometimes STOP: 0x0000007E
    I browsed the web but couldn't find a similar problem yet.
    Solutions including windows repair etc can not work for me as I am not even in the installation menu when this happens.
    Can someone help please?
    I have a MacBook Pro 13 inch (Mid 2012), OSX 10.9.2, 2,5 GHz Intel Core i5, 16 Gb Ram, Intel HD Graphics 4000, 750 GB HDD (WDC WD7500BPKX) and the APPLE HDD 500 GB as secondary HDD (I use the CD-Slot for the second HDD)

    No, when I built in the new HDD and took out the cd drive for the apple HDD I used it to format everything and freshly install Mavericks. Right after I did it I installed Win7 without any problems. This was in January, the Bluescreens started in March..

  • How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

    How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
    WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

    Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
    Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

  • Installing Windows 8.1 with bootcamp, partition issues.

    So I am trying to install windows 8.1 onto my MBP running the latest 10.9.2 operating system. It took a while to get the HD to successfully partition, however when I finally got it working, upon booting from the USB drive I got this error message
    windows cannot be installed to this disk. the selected disk has an mbr partition table windows can only be installed to GPT disks
    Is there any way to change the partition table or to fix this?
    I just tried restoring the partition to one, verifiying and repairing the disk in recovery mode, then re-running boot camp, issue persists.
    running late 2011 15" MBP

    Well, when you start the computer you should press ALT to show the boot manager. With Windows 8 and 8.1 (for Windows 7 there's not this problem) there should be three different icons: the OS X one, and then two called Wininstall (or something like that) and the other is similar but there should be written something like "EFI Boot".
    Well, don't choose the EFI Boot one and you should be fine.
    If you choose the first one the Windows installer format the Bootcamp partition correctly, and then you can start the procedure.

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • HT4623 How can i solve installation problem with iOS 6.

    How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

    can you connect your device to Tiunes and check to see if there are any files in
    OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
    Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
    specifically named OTA......
      Also for the failed itunes restore please attach the contents of the latest log in
    OSX:   ~/Library/Logs/<iphone or ipod or ipad> updater logs
    Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

  • Software Installation Problems with Media Source and Nomad Explo

    Hello Creative Users,
    recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
    I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
    As long as I was running the software on my previous installation everything worked fine.
    I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
    When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
    When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
    This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
    Can someone help me as synchronizing with Musicmatch is a pain.
    Thanks
    Rolf

    Hi everyone,
    as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
    in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
    When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
    Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
    Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
    properties.
    Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
    Now you should be ok and able to install.
    Regards
    Rolf

  • Hello, i have a problem with BootCamp

    Hello people, i have a problem with BootCamp, im really sad...
    Bootcamp assistant dont create the Bootable USB, it say, not been able to create the executable memory drive usb...
    And then i cant do nothing but, close the assistant... sorry for my bad english, but time ago, i was able to install Windows and all that... i dont know why now i cant...
    And i already did it in Mavericks, it just dont let me right know, and i tried to reinstall all OS X, and try again, but nothing... i still get the same error...Please help me :/
    My system is in spanish... but you know what is this...

    Thanks for reply
    Sorry i was out a days...
    I got it from Internet, could it be the .iso?

  • Will Windows Vista work with Bootcamp 3.0.4 (325)?

    Will Windows Vista work with Bootcamp 3.0.4 (325)?  the documentation says that I need a Win 7 installation disc.  I don't want windows 7; I want Windows Vista.
    How do I install the drivers?

    You don't provide any info regarding your computer but Vista is not supported by the newer Apple computers: http://support.apple.com/kb/HT4410
    You could use a VM like Parallels, Fusion, or VirtualBox to install Vista.

  • Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
    The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
    For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
    If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

  • How to eliminate windows partition created with bootcamp

    Instrucdtions for how to eliminate a windows partition created with bootcamp.  thanks

    Go back and reread and open the application you used.
    though most Mac Pro owners choose to dedicate a drive to Windows.
    Even Disk Utility will remove and then stretch the adjoining partiton it is best to use Boot Camp Assistant.
    Best place to ask, Boot Camp forum, of course.

  • Can i download windows to install with bootcamp

    can i download windows to install with bootcamp or do i have to buy a physical CD to get windows on a macbook pro?

    trackerman100 wrote:
    can i download windows to install with bootcamp or do i have to buy a physical CD to get windows on a macbook pro?
    As your MBP has an optical drive you must install from a disc, not an iso on a stick. The previous advice is incorrect.
    Purchase the version of Windows you want on a disk. If you already bought an iso burn it to a disc.

  • MOVED: Installation Problems with PM8M2-V

    This topic has been moved to Intel P4 & Celeron P4 based board.
    Installation Problems with PM8M2-V

    port 1. I did try it on port 2. The odd thing is that this mobo is the first that I have seen where SATA is not recognized in the BIOS setup.
    I did solve the problem, though. I bought a Via chipset mobo from a different manufacturer. I was tired of spending hours on this project and the fact that MSI tech support told me that it was Microsoft's problem was no help. I didn't want to create a separate drive image of this one mobo. The fact is that MSi created a mobo that required loading additional drivers for SATA to be recognized- I have not worked with any other manufacturer who required additional drivers loaded to work with SATA (a drive standard). 
    The new mobo fired right up, recognized the SATA, and I was able to Sysprep the PC in no time. Case solved!

  • Windows 8 installation problem using bootcamp!

    Hi guys, I would really appreciate some help with this, I think I might of made a big mistake.
    Ok so I bought windows 8 yesterday to run on my iMac through bootcamp.
    I went through the instllation process and came to downloading the drivers (windows support software) but here is where I think i went wrong, when i was asked to burn the windows support software to a cd or save it on to an external drive I chose the option of saving onto a drive but I actually just ended up saving the software on to the main hard drive for my iMac.
    I continued to install windows 8 but after installation as expected I'm having problems with the keyboard, mouse, Internet etc without any support software. I went to 'my computer' and the local hard drive only shows the part of drive of the that was particitianed for windows and can't seem to find any way of accessing the mac os x side of the hard drive. I cant even transfer to the mac os x from windows to figure out the problem from there.
    Could any one please help with this?
    Thanks

    Welcome to the Apple Support Communities
    After using Boot Camp, your computer will start always in Windows. To start in OS X, just hold the X key while your Mac is starting. If you want to start always in OS X, after starting in OS X, go to System Preferences > Startup Disk, and select the OS X partition.
    By default, Windows can't read the filesystem that OS X uses for the partition, so that's why you can't access to the OS X partition. Also, you should have burnt the drivers onto a DVD or a USB drive.
    As you have already downloaded the drivers, after starting in OS X, copy them to a USB drive or burn them into a DVD. Then, start in Windows and install them. Note that Windows 8 requires Boot Camp 5 drivers, that you can only get from Boot Camp Assistant if you are running OS X 10.8.3. If you want to be sure that you install the correct drivers, I recommend you to download again the Boot Camp 5 drivers from the Apple webpage > http://support.apple.com/kb/DL1638

Maybe you are looking for