Windows installation unusable.. error causes restart

I had a problem with my computer restarting which I put down to overclocking (I decided to raise the core voltage each time it happened (not often - I only actually raised it once)).
Whilst trying to install software it happened again. The computer restarted and then I tried a second time. After it restarted I decided to try uninstalling the software which it wouldn't let me do since it wasn't installed properly. Whilst trying to delete the desktop icon, the computer crashed and restarted again, and now does so everytime whilst windows is starting up at slightly different points, although always after the desktop has shown.
Safe mode doesn't work, since it restarts before the desktop even shows.
The message displayed on the screen is displayed too breifly to note down what it says so I tried taking a photo with my camera, and after about 15 tries, I eventually got one.
The first line of the error I can't read but the second says;
"An attempt was made to execute non-executable memory."
Then it gives suggestions about checking software, hardware etc and trying safe mode.
It says; *** STOP 0x000000FC (0xBACEB874, 0x0A3E1163, 0XBACEBADE, 0x00000001)
Beggining dump of physical memory... [etc]
I'm not sure how accurate those memory addresses are, or even if they're any use.
If there's no way of fixing this problem without reinstalling windows would it at least be possible to buy another HD, install windows onto this and then salvage those files on the desktop and in other windows folders? I seem to recall being unable to access files that were in user folders last time I tried something like this.

Sounds like you have corrupt Windows files, caused by unstable memory. I suppose you had overclocked Corsair Value Select, how much did you oc it ? It does not oc well (Windows start etc, but programs/games would crash. Upon closing Windows, registry files will be saved and they might have gone corrupted = no boot)
I'd clear CMOS and run memtest (testing memory for errors) at stock settings (download from http://www.memtest.org/ ...floppy version is just fine, just read instructions how to create such disk)
Also, is the system disk (C:) running HOT ? HDD's in cases with poor airflow get HOT (60C) and can cause write errors.

Similar Messages

  • Win 7 64, windows installer package error upon update

    trying to update itunes, downloaded 64 bit setup to hard drive, i have a particular hard drive setup and keep everything out of the os drive for ease of a restart if required.  norton informs me its safe, i open the download location select and double click the itunes setup file.  it launches and starts going through the motions and then an error message pops up informing me that i have a windows installer package error.
    really annoying as this is the second update i have been unable to install.
    any suggestions please, thank you
    yidboy

    again i thank you for your speedy response
    i have followed your instruction and still no luck still the same error message regarding the windows package installer, i also tried repairing too, same outcome.
    looks like a complete install, im right in asking that itunes will synch with my ipod and restore all music, and vid, and pics.  i ahve a back up in any case and its just as easy to copy/paste these folders directly into itunes, or ad folder via file tab.
    but will it leave me with a redundant ipod if the package installer error reoccurs??
    that is the big question
    Yidboy

  • Windows installer engine error when installing LV 8.2.1

    Trying to install LabView 8.2.1 on a system and getting a "Window Installer Engine" error and the program quits.  The software successfully installed on another system.
    I have disabled all other programs and virus scanners.  Any suggestions?
    Thank you,

    I think I may have fixed my own problem and will try and list the steps here in case anyone else runs into this.
    The computer is networked and we are running network licensing.  I have admin priviledges also on this machine.
    We had to have the administrator for the network log on (with the LV installation CD in the drive).  The option was selected to install LV 8.2.1 and then a window appeared notifiying that the system was installing Service Pack 2.
    The admin then logged out and I logged back in to my local accout (not my network username and passwor) and the installed worked correctly (whew!).
    There were some other password issues whick I don't think were related to this problem.

  • Cant install itunes 10.6 no matter what i try! (Windows installer package error)

    I cant install itunes !
    I downloaded the latest version from the offcial site, and everytime i try to install it it stops half way due to Windows Installer Package error. It says I'm missing a program required to continue this installation.
    I've tried removing all the files with removal tools, running it with admin rights, disabling firewalls, User account controls, updated my Windows update to the latest version. Read all the threads and tried everything but it still doesn't work.
    Does any1 have any suggestions?

    Download and save a full itunes setup file.
    Use Winrar to unzip the file into a folder.  Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
    If you don't have winrar, you can go to this link to download a free trial version.
    http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

  • Unable to install itunes 10.5 after update issue. "windows installer package error"

    So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
    Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
    Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
    1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
       • msiexec /unregister
       • msiexec /regserver
    msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
    http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
    Method 3: Start the Windows Installer service
    1. Click Start, type Services.msc and press {ENTER}
    2. Double-click Windows Installer
    3. Set the Startup type of Windows Installer to Manual
    4. Click Start to start the service. Note down the error message if any.
    5. Click OK.
    If the above mentioned steps don’t resolve the issue, then
    follow the steps and check whether you can resolve the issue:
    Method 4: Empty your Temp directory and restart
    1.       Choose Start > Computer
    2.       In Computer, open the "C:" drive.
    3.       Open the Users folder.
    4.       Double-click the folder titled with your username.
    5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
    6.       Choose Organize > Folder and Search Options.
    7.       Click the View tab.
    8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
    9.       Click OK.
    10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
    11.    Double-click the Local folder to open it.
    12.    Right-click on the Temp folder and choose Delete.
    13.    In the confirmation dialog that appears click Yes.
    14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
    15.    Restart your computer.
    Method 5: Removing iTunes
    Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
    1.       Quit iTunes.
    2.       From the Start menu, click Control Panel.
    3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
    Alternately, in Classic Panel of Control Panel, click Programs and Features.
    4.       Select iTunes from the list of currently installed programs, then click Uninstall.
    5.       When asked if you would like to remove iTunes, click Yes.
    6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
    7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
    8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
    Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
    You may refer the following article to download the Windows Installer Cleanup Utility:
    http://support.microsoft.com/kb/290301
    1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
    2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
    3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
    To this:
    This solution correct my bug.
    I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
    You have to go into your registry.
    Start, run, type in “regedit”.
    Next go to HKEY_LOCAL_MACHINE.
    SYSTEM
    CurrentControlSet
    Services
    MSIServer
    To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
    Next, go to the start menu again and type in the search box: “services.msc”.
    Look for and find the Windows Installer service.
    Double click on it and tell it to stop. Next, tell it to start.
    You should now be able to install your programs.
    ------  By the way I dont have the WOW64 option is not available.
    I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
    I have tried other things but i cant remember exactly there were.
    When the install process for itunes is running it changes with the error message shows up during install.
    Thanks.

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

    Unable to install Windows Server 2012 Feature -  [Tools] File Server Resource Manager Tools.
    Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
    In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
    Does anyone have any idea's on why this Feature can not be installed ??
    Scott

    Hi Shaun
    Tried both of your suggestions, however neither strategy worked.
    Strategy 1
    Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"   
    Feature un-installed itself during the restart.
    Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services".  However
    this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
    PACKAGE SERVICING COMMANDS:
      /Add-Package            - Adds packages to the image.
      /Remove-Package         - Removes packages from the image.
      /Enable-Feature         - Enables a specific feature in the image.
      /Disable-Feature        - Disables a specific feature in the image.
      /Get-Packages           - Displays information about all packages in the image.
      /Get-PackageInfo        - Displays information about a specific package.
      /Get-Features           - Displays information about all features in a package.
      /Get-FeatureInfo        - Displays information about a specific feature.
      /Cleanup-Image          - Performs cleanup and recovery operations on the image.
    Strategy 2
    Tried installing via powershell, using the following command DISM
    /online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
    All up back to where I started?

  • I can't install Itunes because of Windows installer package error, please help!

    I tried installing Itunes for a long time on my desktop, I'm running Vista. Everytime I try to install Itunes it runs for a bit, then gives me this message
    " There is a problem with Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    I went through many posts on how to solve this problem, I uninstalled and deleted all the files from this thread : http://support.apple.com/kb/HT1923
    and tried to reinstall Itunes, didn't work, same error message.
    After i tried to install Itunes in Clean boot still didn't work.
    I also downloaded MicrosoftFixit.Program which apperantly fixed this problem for some people, not for me.
    Then I extracted Itunes and tried to install all the components seperately, everything installed correctly, however when I tried to install Apple Software update
    I got the same error message, i think it is the Apple software update that is causing this problem but I have no idea how to solve this problem.
    How do I solve this, any thoughts or suggestions???

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    Now, uninstall Bonjour from Control Panel.

  • ITunes 10.5 Windows installer package error?

    i created windows installer package for iTunes 10.5. The The problem is when i am trying to install package it throws error like "failed to start applemobiledeviceservice". plz give me suggestion how to solve this error?

    There are numerous threads discussing errors with 10.5.0
    can't install itunes 10.5
    ***Fix for iTunes 10.5 Install on Win7 64bit***

  • Windows Installer package error when installing itunes.

    How can I reinstall Apple Software (Update) on my PC which is necessary to reinstall itunes?
    Also when I've tried to reinstall itunes I'm constantly told there is a problem with the Windows Installer.  Are there any suggestions?  Thank you for any help that you may be able to advise. 

    Let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • Windows Installer Service Error - Windows 7 + iTunes 10.2.2

    This is the same type of message posted in various places with the following error: The Windows Installer Service could not be accessed.  This can occur if you are running Windows in safe mode, or if the Windoews Installer is not correctly installer.  Contact your support personnel for assistance.
    I've attempted everything I could find in the windows forum.  I'm open to new ideas ASAP as I can't sync my phone/calendar without it.  Itunes doesn't function at all, uninstall failed as well.  Thank you for the assistance!

    Gabe,
    You see a lot of suggestions on the Windows/Apple forums by unregistering and reregistering the windows installer services ;  msiexexec /unregister  +  msiexec /regserver. Or to create a new windows account/profile.
    This didn't work for me, what was working is a uninstall of  iTunes and the related Apple software, Apple application support, Apple mobile device support and Apple software support by using Windows programs and features.
    I als cleaned up the personal and all users profile directories  c:\users\<user>\app data\roaming\Apple Computer\iTunes.
    Good luck

  • Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

    Hi all
    After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
    error 1719 Windows installer issue.
    I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
    Dave
    DJH

    Hi Lenora
    See below
    Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
    03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
    03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
    03-19-2013,17:33:38 : CSetupApp::ScanXML
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
    03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
    03-19-2013,17:33:38 : MSI Version = 3.1
    03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : System Central Processor = 64
    03-19-2013,17:33:38 : Product Type = SETUP_BEX64
    03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
    03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Product Version = 12.5
    03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Equal PID
    03-19-2013,17:33:38 : Product version: 12.5.2213
    03-19-2013,17:33:38 : StartBESequence
    03-19-2013,17:33:38 : Executing BE_PreCheckInstall
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing StartBESequence
    03-19-2013,17:33:38 : Pulling user data from the MSI
    03-19-2013,17:33:38 : Upgrade state set to 0
    03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
    03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
    03-19-2013,17:33:38 : MSI processing complete
    03-19-2013,17:33:38 : Pulling user data from the command line
    03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
    03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
    03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
    03-19-2013,17:33:38 : After check for parameter file exists.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
    03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
    03-19-2013,17:33:38 : After Check for INSTALL_MODE.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
    03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
    03-19-2013,17:33:38 : Ignoring the TSM switch.
    03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
    03-19-2013,17:33:38 : Not in Maintenance mode
    03-19-2013,17:33:38 : Getting the Silent Params.
    03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
    03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
    03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
    03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
    03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
    03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
    03-19-2013,17:33:38 : List of switches set follows:
    03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
    03-19-2013,17:33:38 : /SNO: = 0930292112010690
    03-19-2013,17:33:38 : /USER: = backup
    03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
    03-19-2013,17:33:38 : /PASS: = ********
    03-19-2013,17:33:38 : /TS:
    03-19-2013,17:33:38 : /TD: = ALL
    03-19-2013,17:33:38 : /DOCS:
    03-19-2013,17:33:38 : /LOADER:
    03-19-2013,17:33:38 : /AOFO:
    03-19-2013,17:33:38 : /EXCH:
    03-19-2013,17:33:38 : /SQL:
    03-19-2013,17:33:38 : /NTA:
    03-19-2013,17:33:38 : /RAULUS:
    03-19-2013,17:33:38 : /DBSERVER:
    03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
    03-19-2013,17:33:38 : /BACKUPDATA: = 0
    03-19-2013,17:33:38 : /MAC:
    03-19-2013,17:33:38 : Command line processing complete
    03-19-2013,17:33:38 : Install set to run in UI mode
    03-19-2013,17:33:38 : CDlgPushWelcome::Pass
    03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
    03-19-2013,17:33:43 : Validating license data
    03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
    03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:33:44 : Connected to SQL Server.
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
    03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
    03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:05 : After Check for Remote_Install.
    03-19-2013,17:34:05 : After Check for RA_INSTALL.
    03-19-2013,17:34:07 : Validating serialization data
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:07 : After Check for INSTALL_MODE.
    03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:34:07 : On Init of CDlgChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
    03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
    03-19-2013,17:34:12 : Validating Local Options Data
    03-19-2013,17:34:13 : Validating service account data
    03-19-2013,17:34:13 : CDlgSSO Pass Function.
    03-19-2013,17:34:13 : After Check for INSTALL_MODE.
    03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : Validating DlgChooseDBServer data
    03-19-2013,17:34:20 : Drive C:     Required: 1102 MB     Available: 37138 MB
    03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:20 : CDlgCAS Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : CDlgClone Pass Function.
    03-19-2013,17:34:20 : CDlgClone not passed.
    03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : Install Summary XML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
    03-19-2013,17:34:20 : Install Summary XSL File:
    03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
    03-19-2013,17:34:20 : Install Summary HTML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
    03-19-2013,17:34:20 : Not Quickstart Edition
    03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
    03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
    03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
    computer.  The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
    Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:27 : Executing InstallLiveUpdate.
    03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Vista or Longhorn server.  Not installing .NET Frameworks.
    03-19-2013,17:34:40 : .NET Framework was detected.  Skipping install.
    03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:34:41 : m_bUseNativeClient = 1
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
    03-19-2013,17:34:41 : SQL Server version 9
    03-19-2013,17:34:41 : SQL version returned:  9
    03-19-2013,17:34:41 : Executing SQL_GetServicePack.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
    03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
    UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
    03-19-2013,17:34:45 : V-225-53:  ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601.  ***To search for information about this error, click
    here
    03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
    03-19-2013,17:34:45 : Failed to install third party products.
    03-19-2013,17:37:25 : Validating install complete
    03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
    03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:37:25 : Removed files:
    03-19-2013,17:37:25 : ERROR:  Installation failed with error 1603.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:41:16 : Windows Operating System Version: 6.1
    03-19-2013,17:41:16 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:41:18 : Executing managed _Setup:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:41:18 : Loading XML from:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:41:19 : Launching UI Install
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:19 : m_bUseNativeClient = 1
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:41:20 : CopySupportFiles
    03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:41:28 : Typical install value is set to : True
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:43:04 : Install is not executing as the service account.
    03-19-2013,17:43:04 : Successfully Logged on as service account.
    03-19-2013,17:43:04 : Successfully impersonated service account.
    03-19-2013,17:43:04 : EUserName value successfully written to the registry.
    03-19-2013,17:43:04 : EPassword value successfully written to the registry.
    03-19-2013,17:43:04 : EDomain value successfully written to the registry.
    03-19-2013,17:43:09 : There were no remote computers selected for install
    03-19-2013,17:43:09 : m_bUseNativeClient = 1
    03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:43:10 : Terminal Services enabled.
    03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
    03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:43:11 : Executing InstallLiveUpdate.
    03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:36 : Starting Install
    03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:44:36 : Discovered Total Actions: 115
    03-19-2013,17:44:36 : The return code from the MSI is: 1601
    03-19-2013,17:44:36 : Cleaning up the symc status key
    03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:44:36 : Clean up Symantec installer keys.
    03-19-2013,17:44:37 : Terminal Services enabled.
    03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:45:28 : Gathering Telemetry items
    03-19-2013,17:45:28 : Failed to start the management service
    03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,17:45:28 : Sending Telemetry to Symantec
    03-19-2013,17:45:28 : Transmit Telemetry initialized.
    03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
    03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,17:56:31 : Windows Operating System Version: 6.1
    03-19-2013,17:56:31 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:56:33 : Executing managed _Setup:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:56:33 : Loading XML from:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:56:34 : Launching UI Install
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : m_bUseNativeClient = 1
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:56:35 : CopySupportFiles
    03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:56:49 : Typical install value is set to : True
    03-19-2013,17:56:50 : Executing SQL_GetServicePack.
    03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : Executing SQL_GetServicePack.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:57:37 : m_bUseNativeClient = 1
    03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:58:41 : Install is not executing as the service account.
    03-19-2013,17:58:41 : Successfully Logged on as service account.
    03-19-2013,17:58:41 : Successfully impersonated service account.
    03-19-2013,17:58:41 : EUserName value successfully written to the registry.
    03-19-2013,17:58:41 : EPassword value successfully written to the registry.
    03-19-2013,17:58:41 : EDomain value successfully written to the registry.
    03-19-2013,17:58:51 : There were no remote computers selected for install
    03-19-2013,17:58:51 : m_bUseNativeClient = 1
    03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:58:52 : Terminal Services enabled.
    03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
    03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:58:54 : Executing InstallLiveUpdate.
    03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Starting Install
    03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:59:08 : Discovered Total Actions: 115
    03-19-2013,17:59:08 : The return code from the MSI is: 1601
    03-19-2013,17:59:08 : Cleaning up the symc status key
    03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:59:08 : Clean up Symantec installer keys.
    03-19-2013,17:59:10 : Terminal Services enabled.
    03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:00:01 : The return code is: 0
    03-19-2013,18:00:01 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:02:24 : Windows Operating System Version: 6.1
    03-19-2013,18:02:24 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:02:26 : Executing managed _Setup:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:02:26 : Loading XML from:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:02:26 : Launching UI Install
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : m_bUseNativeClient = 1
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:02:26 : CopySupportFiles
    03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:11 : The return code is: 0
    03-19-2013,18:03:11 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:03:21 : Windows Operating System Version: 6.1
    03-19-2013,18:03:21 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:22 : Windows Operating System Version: 6.1
    03-19-2013,18:03:22 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:23 : Executing managed _Setup:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:23 : Loading XML from:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Launching UI Install
    03-19-2013,18:03:24 : Executing managed _Setup:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : m_bUseNativeClient = 1
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : Loading XML from:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:24 : CopySupportFiles
    03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:58 : Typical install value is set to : True
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:05:35 : Install is not executing as the service account.
    03-19-2013,18:05:35 : Successfully Logged on as service account.
    03-19-2013,18:05:35 : Successfully impersonated service account.
    03-19-2013,18:05:35 : EUserName value successfully written to the registry.
    03-19-2013,18:05:35 : EPassword value successfully written to the registry.
    03-19-2013,18:05:35 : EDomain value successfully written to the registry.
    03-19-2013,18:05:36 : There were no remote computers selected for install
    03-19-2013,18:05:36 : m_bUseNativeClient = 1
    03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:05:37 : Terminal Services enabled.
    03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
    03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:05:38 : Executing InstallLiveUpdate.
    03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Starting Install
    03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:05:50 : Discovered Total Actions: 115
    03-19-2013,18:05:50 : The return code from the MSI is: 1601
    03-19-2013,18:05:51 : Cleaning up the symc status key
    03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:05:51 : Clean up Symantec installer keys.
    03-19-2013,18:05:51 : Terminal Services enabled.
    03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:06:32 : The return code is: 0
    03-19-2013,18:06:32 : SUCCESS:  Installation has completed successfully.
    03-19-2013,18:07:36 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:07:39 : Error initializing shared data
    03-19-2013,18:07:39 : ERROR:  Installation failed with error 1603. GetLastError = :0
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:47 : Launching UI Install
    03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : m_bUseNativeClient = 1
    03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:13:48 : CopySupportFiles
    03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:13:54 : Typical install value is set to : True
    03-19-2013,18:13:55 : m_bUseNativeClient = 1
    03-19-2013,18:13:55 : Executing SQL_GetServicePack.
    03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : Executing SQL_GetServicePack.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:16:09 : Service account specified is not valid
    03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
    03-19-2013,18:16:10 : Error validating service account credentials.
    03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:16:20 : Install is not executing as the service account.
    03-19-2013,18:16:20 : Successfully Logged on as service account.
    03-19-2013,18:16:20 : Successfully impersonated service account.
    03-19-2013,18:16:20 : EUserName value successfully written to the registry.
    03-19-2013,18:16:20 : EPassword value successfully written to the registry.
    03-19-2013,18:16:20 : EDomain value successfully written to the registry.
    03-19-2013,18:16:22 : There were no remote computers selected for install
    03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:16:23 : Terminal Services enabled.
    03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
    03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:16:25 : Executing InstallLiveUpdate.
    03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Starting Install
    03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:16:39 : Discovered Total Actions: 115
    03-19-2013,18:16:39 : The return code from the MSI is: 1601
    03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:16:39 : Clean up Symantec installer keys.
    03-19-2013,18:16:39 : Cleaning up the symc status key
    03-19-2013,18:16:41 : Terminal Services enabled.
    03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:09 : Gathering Telemetry items
    03-19-2013,18:17:09 : Failed to start the management service
    03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,18:17:09 : Sending Telemetry to Symantec
    03-19-2013,18:17:09 : Transmit Telemetry initialized.
    03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
    03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
    03-19-2013,18:17:33 : Telemetry transmission failed.  Data was not sent.
    03-19-2013,18:17:33 : The return code is: 1601
    03-19-2013,18:17:33 : ERROR:  Installation failed with error 1601. GetLastError = :0
    03-19-2013,18:17:48 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:17:51 : Error initializing shared data
    03-19-2013,18:53:53 : m_bUseNativeClient = 1
    03-19-2013,18:53:53 : Executing SQL_GetServicePack.
    03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : Executing SQL_GetServicePack.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : m_bUseNativeClient = 1
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:58:06 : Windows Operating System Version: 6.1
    03-19-2013,18:58:06 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:58:08 : Executing managed _Setup:
    03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:58:09 : Loading XML from:
    03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:58:09 : Launching UI Install
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : m_bUseNativeClient = 1
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:58:10 : CopySupportFiles
    03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:58:15 : Typical install value is set to : True
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:59:43 : Install is not executing as the service account.
    03-19-2013,18:59:43 : Successfully Logged on as service account.
    03-19-2013,18:59:44 : Successfully impersonated service account.
    03-19-2013,18:59:44 : EUserName value successfully written to the registry.
    03-19-2013,18:59:44 : EPassword value successfully written to the registry.
    03-19-2013,18:59:44 : EDomain value successfully written to the registry.
    03-19-2013,18:59:46 : There were no remote computers selected for install
    03-19-2013,18:59:46 : m_bUseNativeClient = 1
    03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:59:47 : Terminal Services enabled.
    03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
    03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:59:49 : Executing InstallLiveUpdate.
    03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Starting Install
    03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,19:00:03 : Discovered Total Actions: 115
    03-19-2013,19:00:03 : The return code from the MSI is: 1601
    03-19-2013,19:00:03 : Cleaning up the symc status key
    03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,19:00:03 : Clean up Symantec installer keys.
    03-19-2013,19:00:05 : Terminal Services enabled.
    03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:10 : Gathering Telemetry items
    03-19-2013,19:00:10 : Failed to start the management service
    03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,19:00:10 : Sending Telemetry to Symantec
    03-19-2013,19:00:10 : Transmit Telemetry initialized.
    03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
    03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
    03-19-2013,19:00:10 : The return code is: 1601
    03-19-2013,19:00:11 : ERROR:  Installation failed with error 1601. GetLastError = :0 
    DJH

  • Can't uninstall Livecycle - Windows installer package error when uninstalling error 1722

    I'm having issues uninstalling Livecycle.
    I am getting Error 1722. There is a problme with the windows installer package. A program run as part of the setup did not finish as expected.
    Has anyone else had this issue?
    If so, how do I then uninstall this software?

    Hi Kaycii,
    Please try to run the Microsoft Fix it from the link below.
    Fix problems that programs cannot be installed or uninstalled
    Regards,
    Anand

  • Itunes window installer package error

    cant download new itunes 10. something,have vista tried windows uninstall/repair, and revo uninstall all apple software and then reinstall, did not work.  now have 2 ipods and no itunes on pc please help. 

    have vista tried windows uninstall/repair
    Doublechecking. Did you try the following user tip?
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Cannot install itunes, windows installer package error

    I've been looking around for a solution and I still can't find one that is specifically for my case. I've never had itunes before (well I guess I did but THAT never installed for some reason).
    Anyways, I can't install the latest itunes (and I tried itunes 9 as well), it keeps giving me this message:
    There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
    I tried everything! I uninstalled everything and redid the installation. I did this method with the extract.bat to get the msi files to individualling install from the itunes64setup.exe...the only msi files that don't download and give me that error are the updater and actual itunes msi file.
    I'm on a:
    Acer Aspire 8930G
    Windows Vista Home Premium
    Service Pack 2
    x64 OS

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features /highlight ASU and click CHANGE then REPAIR,

  • Windows Installer reports errors when installing iTunes

    I have a system with Windows XP. I only have 512MB memory. I have made numerous attempts to install iTunes. I actually had iTunes on the computer previously in conjuction with EZVinyl Converter. I was having problems with that and tried to reload iTunes. The download works fine. When I try to install, I get a message saying, "Windows Installer encountered problems  before iTunes could be configured. I do not know how to fix the problem.
    I use Comodo for my antivirus and firewall protection.

    Problem was resolved by solutions offered by B Noir. It was necessary to remove the Temp folder in Local Settings for iTunes to install correctly on my Windows XP system. Thanks for your input.

  • Trying to download itunes, windows installer package error

    im trying to download itunes but when i do it says
    "there is a problem with this windows installer package. a program run as part of the setup did not finish as expected. contact your support personnel or package vendor."
    is this an itunes problem or a windows problem? someone please help!

    I had the same problem trying to install version 8.0.1, I went to my control panel then to add/remove programs and I removed the windows installer from my computer. It does give a warning that certain programs may not work but it did not effect my computer. I tried the install of iTunes again and it worked. My computer used the iTunes installer since the windows installer no longer existed. After iTunes update was completed I then reinstalled the windows installer program.

Maybe you are looking for

  • ACS external database issue

    Hi I have the following issue, user exists on both the ACS and token server authenication is set to external database with no unknown user policy as the user is known to the ACS! this fails authenication error message is CS user unknown... Now if the

  • TS4006 Can you activate location services on a device that has it turned off?

    I can't locate my ipad using the "find my iphone" app because the "location services" is turned off on my device.  Am I able to remotely turn on "location services" via the cloud or through the app itself?

  • Macbook pro 2009 s/pdif in AND out?

    I'm thinking of buying an audio interface that uses s/pdif, which I've never used. When I click "About this Mac" and "More Info" on my late 2009 MBPro, it only mentions s/pdif output, but I'll need s/pdif in to get info from the interface. Will this

  • Lightroom 3.2 and facebook export

    goodmorning everybody ! i hope someone can help me. First of all sorry for my english so ... i have a problem exporting photos to Facebook. i had authorized Lightroom on facebook. Back to Lightroom and i see that i can't choose any album or create on

  • Signed code vs security manager

    i've seen tons of information on how to implement a security manager, and tons of information on signed code, but i haven't found information about WHY you choose with one over the other. we are implementing security is a very large desktop app.