Windows Installer 5.0 Removal

I have Server 2008 which has Windows Installer 5.0 installed. How can I remove the 5.0 version and put the 4.5 version back on. I need it to install an application since 5.0 is not compatible.
HossFly, Exchange Administrator

If its not available in Control Panel|Add Remove then this one might help.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

"The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.

Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Installer error message when installing or removing iTunes

When I try to either upgrade, install, or remove iTunes, I get this message:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
Anyone know how I can fix this?

Microsoft have this help article on this error message;
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q315346#kb1

Remove windows Installation from Old WD hard drive and Install Fresh Copy on the New One.

Hi Community! I just bought a new WD Blue 1 TB hard drive, my old hard drive is WD Blue caviar 500 GB, running on Windows 7 ultimate 32 bit.
There are two things I wish to do: 1. Firstly, if it's possible, I would like to copy some videos, images, music etc. from my OLD Drive to the new one.
Please note that, I don't have an external disk to do it, I know that would've been less complicated, but that's not an option at this point. 2. Secondly, once that is done, if possible, I want to remove windows 7 installation from my old hard drive, re-partition it to make it just the storage drive, and finally install
fresh copy of windows 7- 64 bit to the new Hard drive.
Please note that, my old Hard drive is installed on windows 7- 32 bit and now I want to install a fresh copy of Windows 7-64bit instead of 32bit, because I am upgrading my
configuration with better ones.
I am adding 4 GB corsair vengeance ram to my 2 GB corsair ram, so that is 6 GB in total.
I am adding 1 TB hard disk to my 500 GB Hard disk, so that is 1500 GB.
Both my processor and mother board supports 64 bit.
Intel® Pentium® Processor G2020 (3M Cache, 2.90 GHz) And this Mother board - "Biostar H61MGV3"I know that you could clone the partition and migrate the installation from one hard drive to another using the Acronis True Image WD Edition Software, but I don't want that.
In simple words, say I have a dos computer, I installed my 1TB WD hard drive, installed a fresh copy of windows 7-64bit. So my computer is up and running. Now, I have another hard
drive which I wish to use, that is 500GB WD, but it has Windows 7-32 bit installed in it.
So what I want to do is, make this old hard drive a complete 500 gb storage device and remove the windows installation from it, without loosing music, videos, etc. and then lastly
copying the music and other media to the new hard drive, and formatting it completely.
I am perhaps making this very complicated, I know you would have better easier solution for this.
I am frustrated, your help would be appreciated, thanks a lot. Sincerely, Abe

Since you don't want to clone the drive (I agree with you), you can just swap drives and install Windows on the new drive. Windows won't complain that you are installing on a different drive because it only cares if you change more than one piece of hardware at a time. The problem will arise when you copy the files from the old drive because you cannot just connect it via SATA. That would confuse Windows, as both installations were run on that hardware. You need to mount it in an external dock via USB 2.0/3.0 which will isolate the details of the OS. After you copy all necessary files, you can use WDC Lifeguard to write zeros to the entire disk and then create a new partition. After that you can mount it via SATA because it will be a new drive. Do NOT be in a hurry to wipe the drive however, as you don't want to forget something.

HT1923 Trying to remove ITunes so I can reinstall getting message from windows installer /feature that you are trying to use is on a network resource that is unavailable? How do I correct same message when trying to install upgrade.

Message receiving is from windows installer:the feature you are trying to use is on a network resource that is unavailable

Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

TS1702 i am not able to install update or remove itunes and install newer versions, windows installer service cannot be accessed,

i am not able to install update or remove itunes and install newer versions,
its stops installing and a windows error is shown
i e :: windows installer service could not be accessed , this could occur if you are running windows installer in safe mode
or windows installer service is not correctly installed
the same error happens if i try to uninstall the itunes from the control panel- remove programmes option
im using windows 7 home basic 64 bit version
this eroor is not happening with any other programmes..
can someone tell me how to solve this issue
thanx
tushar

Reinstalling iTunes is really daunting task. See
http://www.apple.com/support/iphone/assistant/itunes/#section_6

Windows 7 installation failure - Partition removal failure

Having an issue...
Have newish 27inch with latest SL build. Bootcamp 3.02. Tried to install Windows 7 (64 bit, which is probably the mistake). Made it most of the way through the installation process, then the screen started to hang for while... had no choice, had to reboot. Long story short, I eventually had to restart (hold option) to boot into OS, and then remove the partition. Problem is, even after I removed the partition from bootcamp, whenever I restart my machine, if I don't hold down option, it goes to a black screen looking for a bootable disk. It thinks it's still trying to boot to windows, even though the partition has been removed. Aside from blasting the OS away, any work arounds??
thanks much

Thanks for the info - forgot to check the start-up preferences...
Been reading a bunch of notes on the Window's 7 installation, more workarounds then expected but it seems manageable. After getting the partition setup, rebooting, and getting into the windows installation setup, the partition that I setup was marked as 'not formatted properly' (as mentioned in the bootcamp installation guide). However, the "next" button was grayed out, not allowing me to continue. So, I tried formatting the partition from within the widows setup and everything seemed to work until the second reboot (post installation).
I'll go back and research more - thanks for your quick and helpful answer.

How can I remove Apple Software update from Programs in Control Panel. I grt a message that there is an error in Windows Installer Package?

I get this message: "A program required for this install to complete could not be run.
There is a problem with this Windows Installer Package". OS, Windows 7-64

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC, and try another iTunes install. Does it go through properly this time?

Can't update/remove itunes; problems on windows installer

I've been trying to update my 10.6 iTunes because my IO6 devices only require 10.7 but windows installer has been giving me problems. I've got error messages such as;
"Error occured furing installation. Your system has not been modified"
"Windows installer service could not be accessed. This can occur if service installer is not correctly installed. Contact support personel."
"Windows installer could not be accessed. This can oocur if you are running windows in a safe mode or windows installer is not correctly installed."
I 've been searching solution online but still hasn't solve this.
I hope someone can help me with this.

Is this on a 64-bit system, steffi? If so, try the following user tip:
"The Windows Installer Service could not be accessed" error messages when installing iTunes for Windows on 64-bit systems

Unable to install itunes 10.5 after update issue. "windows installer package error"

So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
   • msiexec /unregister
   • msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1.       Choose Start > Computer
2.       In Computer, open the "C:" drive.
3.       Open the Users folder.
4.       Double-click the folder titled with your username.
5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6.       Choose Organize > Folder and Search Options.
7.       Click the View tab.
8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9.       Click OK.
10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11.    Double-click the Local folder to open it.
12.    Right-click on the Temp folder and choose Delete.
13.    In the confirmation dialog that appears click Yes.
14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15.    Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1.       Quit iTunes.
2.       From the Start menu, click Control Panel.
3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4.       Select iTunes from the list of currently installed programs, then click Uninstall.
5.       When asked if you would like to remove iTunes, click Yes.
6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Itunes and windows installation prob...

I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
Windows XP

http://img148.imageshack.us/img148/8793/itunesvs7.png
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

I am trying to update iTunes but get this box message comes up, "Network error occurred while attempting to read from the file: c:/windows/installer/itunes.msi" I have be told to uninstall all iTunes then reinstall, if I do this will I lose my Library

Looking on the net to solve this problem, it says
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
I have save all my iTunes on a CD.
If I uninstall iTunes, will I lose my iTunes library and video and apps and inturn will I lose this off my phone..
I have tryed to update my iPhone firmware as they said there is a new update firmware, it would not install this and put my phone into recovery mode and I had to use iPhone recovery fix to get it out of recovery mode, my iPhone did a back-up before it tried to update the firmware.
Any idea's are welcome

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msi

All sorted now just needed to repair itunes from control panel

ITunes x64 does not install in Windows 7. Shows that there is problem with windows installer package

These images below show the error message I retrieve. I downloaded iTunes 10.5 x64 Edition for windows from Apple Official Website. When I try to install, it shows me these errors. I even tried removing the old version iTunes, and installing this version. But still the same error occurs. Even used windows cleanup utility to remove all itunes and quicktime related files. Still the same problem occurs. I also noticed a difference in this installation compared to the previous ones. In the previous version installation a segment of Apple Terms & Conditions Agreement will appear. But in this installer package, as you can see in the images provided it does not appear. How to solve this? I've been trying to install this for nearly a month.

Nowadays people don't back up to CD/DVD. They get an *external hard drive* and copy over their entire iTunes folder, and whatever else they are backing up.
The advantages are (1) this method does not depend on iTunes's horribly unreliable burning capability (2) you can look at the external and see that the stuff you backed up is really there. (If you want to see an unhappy person, it is when they try to restore from CD/DVD and discover that it did not burn correctly in the first place.) (3) it lets you back up your other valuable files besides your music.

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Windows Installer 5.0 Removal

Similar Messages

Maybe you are looking for