Windows Installer & Contribute 3.11
I installed Contribute 3.11 on my Windows 2000 machine today.
Yes, my work still makes us use Windows 2000, Office 2000, and IE6.
After installing the program, it now runs Windows Installer every
time I try to open up any Office, IE, or Explorer window. This runs
for 3-5 minutes before finally opening up the window. I have tried
every fix on the forums, multiple uninstalls, Windows Install
Cleanup, reg edits deletions, multiple reboots, etc, etc, etc. The
support desk was of course no help. Does anyone else have any other
idea on how to get this off of my machine. I can no longer see
Contribute or FlashPage but I am still having the same problem. My
work productivity was probably negative today because of this
ridiculous glitch.
Please help.
Thanks,
Jill
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=55&catid=290&threadid =1222923&highlight_key=y&keyword1=right%20click
Refer the above link, it may help in resolving the
issue.
Similar Messages
-
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
ITunes 10.5 Error Message: There is a problem with this Windows Installer package
When trying to update iTunes to version 10.5, I get the following error message at the end of the installation process:
There is a problem with this Windows
Installer package. A program run as
part of the setup did not finish as
expected.
I have attempted to troubleshoot Windows Installer and it appears to be working properly.After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Premier Elements installation (Windows installer) problem.
I cant install premier elements 12 on my computer, I get a windows installer error message as per the following. I have tried to install the DVD and a downloaded version. Has anyone had (and overcome) the same or similar issues? Many thanks.
Error message:
Windows ® Installer. V 5.0.7601.17514
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.download from the link here,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Enter Network Password/Windows Installer
Hi
We are having problems with Macromedia Contribute 3 and I was wondering if anyone could help. Please note that I am still in the "infancy stage" of computer literacy so patience is requested!!
First issue - I keep getting the box "enter network password". I try to do so, and it keeps coming back up. CONSTANTLY. I thought until recently that it had to do with our email program, but was informed by my internet provider that it is for our website. How do I make this box go away and STAY away?
Second Issue - When I try to right click on a file or document, I get the box "Windows Installer" and the message "Please wait while windows configures Macromedia Contritbute ". I hit "cancel" and then get "The feature you are trying to use is on a CD ROM or other removable disck that is not available. Insert the Macromedia Contribute 3 disck and click ok" (I do not have this disk). Then I get "error 1706. No valid source could be found for product Macromedia Contricute 3. The Windows Installer cannot continue".
Can anhone help????Hi,
Please try to enable the following security policies to check the result:
1. Enter “gpedit.msc” in the Start Search box.
2. Open “Computer Configuration”/Windows Settings/Security Settings/Local Policies/Security Settings.
3. In the right pane, enable the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
Meanwhile, just for test, check the NTML settings:
Click the start button and type secpol.msc in the search function.
Browse to "Local Policies" -> "Security Options".
Now look for the entry "Network Security: LAN Manager authentication level" and open it.
Click on the dropdown menu and select "Send LM & NTLM - use NTLMv2 session security if negotiated".
Apply the settings.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer packageHello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Unable to install itunes 10.5 after update issue. "windows installer package error"
So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
• msiexec /unregister
• msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1. Choose Start > Computer
2. In Computer, open the "C:" drive.
3. Open the Users folder.
4. Double-click the folder titled with your username.
5. If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6. Choose Organize > Folder and Search Options.
7. Click the View tab.
8. Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9. Click OK.
10. Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11. Double-click the Local folder to open it.
12. Right-click on the Temp folder and choose Delete.
13. In the confirmation dialog that appears click Yes.
14. If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15. Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1. Quit iTunes.
2. From the Start menu, click Control Panel.
3. In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4. Select iTunes from the list of currently installed programs, then click Uninstall.
5. When asked if you would like to remove iTunes, click Yes.
6. After the uninstallation is complete, do not restart your computer if you are prompted to.
7. If other program entries were listed for iTunes in Programs and Features remove those as well.
8. In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows. -
Windows Installer error message when installing or removing iTunes
When I try to either upgrade, install, or remove iTunes, I get this message:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
Anyone know how I can fix this?Microsoft have this help article on this error message;
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q315346#kb1 -
I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!tools is at the top of the apple updater but dont get your hopes up
-
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Itunes and windows installation prob...
I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
Windows XPhttp://img148.imageshack.us/img148/8793/itunesvs7.png
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time? -
Looking on the net to solve this problem, it says
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
I have save all my iTunes on a CD.
If I uninstall iTunes, will I lose my iTunes library and video and apps and inturn will I lose this off my phone..
I have tryed to update my iPhone firmware as they said there is a new update firmware, it would not install this and put my phone into recovery mode and I had to use iPhone recovery fix to get it out of recovery mode, my iPhone did a back-up before it tried to update the firmware.
Any idea's are welcomeDownload the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msiAll sorted now just needed to repair itunes from control panel
Maybe you are looking for
-
I need to know how I can get my iPhone to work in South Africa. I used it in Australia and was told I could use it in SA...but now I am told the settings are different and therefor I cannot get the internet to work on my iphone. How can I get this wo
-
I'm in a BCS project and designed to be the BW consultant for the project. I know that there is a base named EC-CS that you can read FIGL datas into a cube in BW to import these data later to a BCS cube. But I heared that there is a new solution that
-
MS SQL Server 2K JDBC Connection Problem
Hi, I have installed Sql Server 2000 with mixed mode authentication. I am able to connect to connect through ODBC with both Windows and server authentication. The same when i try with JDBC, i am not able to connect. I have added the driver jars to th
-
Table row hightlight question.
I have a table with four columns. When I click on one row, that row should be hightlighted. The selected row hightlights on three columns but not the one I clicked on. How do I make it hightlight whole row? Record should not be editable in my case. T
-
Script not showing in index file after publising -- 2nd day of trial
Why doesn't the published DW index file show an actual, intended flash image (weather bug) when Publisher and CoffeeCup do? Please advise. Here is my DW index page: http://96.9.48.31/