Windows Installer--NEED HELP BAD!!!

I am getting this message: The Windows Installer service could not be accessed. This can occur if you are running Windows in a safe mode or of the Windows Installer is not correctly installed. How do i change it from out a safe mode or know if it's correctly installed?

I had the same problem. Apple support was no help. Go to the Microsoft Windows website and type in "error 1719" at the search bar. It will come up with two fix methods. Do the first one and if that doesn't work, do the 2nd one as well. I kept getting messages that my windows installer could not be located or I was operating in safe mode. This method fixed my problem and I was able to remove itunes and then install 7.0 successfully. It's very frustrating but if your operating on a microsoft platform, Apple will be no help.

Similar Messages

  • Adobe reader not working. Needs help badly!!

    I get this error  message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
    do I fix this. Not happy!!
    My error messge I get. I need help badly to fox this !!
    Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
    has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    Can anybody Please help  me !!!!!!!!!!!!!!!!!!!!!!!!!!
    Michael Ladd and email is [removed]

    Adobe Reader cannot open ZIP files. It only opens PDF files.

  • I need help badly with my ibook and palm pilot

    Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

    I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
    At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
    I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
    -NA

  • HT4009 Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

    Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

    You need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Portege M900 cannot detect/read from DVD drive - Need help badly!

    I have this problem with Portege M900. My laptop cannot read from the DVD drive.
    Does any one has similar problem? Need help badly as I cannot play my game from the CD.

    Test if the dvd drive is seated correctly in the compuer, I had a computer the dvd drive did not work until I removed one of the on back of the laptop (machine was a Toshiba different model) and then I was able to seat the dvd drive correctly.

  • Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

    Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

    Hi watanabei,
    Please see Countries where ExportPDF is available for purchase. - Adobe Community. It's necessary to have a credit card billing address in one of the countries listed in this document. If ExportPDF is unavailable to you, you may want to consider an Acrobat subscription, which would also allow you to convert PDF files to Word and other format. For more information, see www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • My ipad can't connect to itunes store.. need help badly :(

    my ipad can't connect to itunes store.. need help badly :(

    have you tried quiting the app, ie removing it from the multitasking bar also, and then retrying it? Failing that, flick the ipad into airplane mode for a minute, then flick it back, wait for your wifi to connect then try again.

  • Need help badly!! how can i use the front camera i...

    guys, i need help with the front camera of my device
    how can i enable the front camera of nokia N900 to shoot photos or videos,
    this problem is really bugging me...
    need help badly...

    You can't.. it is terrible..
    the only app that really uses it is mirror
    Open this link on your phone to install mirror
    http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
    the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

  • Windows Installer-Urgent Help Needed

    After I installed Windows XP Home Edition, I inserted my Leopard CD. Whenever I try to open the Autorun, the following message appears:
    *This package requires a newer version of Windows Installer. Do you want to update the version of Windows Installer on your system?*
    After I click 'Yes', the following message appears:
    *The required resource 'UPDATE' is missing.*
    I click OK, and then the installer quits. Is there a way to install the newest version of Windows installer, and if not, how do I return to my Mac OS X Leopard?

    It sounds like the three of you installed XP without service pack 2. Try this:
    From Mac OS download service pack 2 from Microsoft and save it onto a flash drive--which I assume will work in Windows even without the Apple drivers--or (provided you burn using a standard format, not Apple's HFS!) burn it to a CD (it looks like it is 266MB). Then boot into Windows and install service pack 2 by inserting the flash drive or CD and double clicking on the exe. Once service pack 2 is done installing, the apple drivers should be willing to install.

  • Need Help Badly Very Sad?

    I went to a site called jippii today you can play games and stuff there and I got this message that I needed Microsoft Java Virtual Machine now i know this is up for download anymore so what can i do. I have been to many other sites and get the same error ive download like a ton of files from java site but nothing has really gone right yet what can i do please help?

    To install the Java that's needed to play games, etc, go here http://java.com/en/index.jsp and click the "Get It Now" button in the upper right.
    If you want to program with Java, go here http://java.sun.com/j2se/1.4.2/download.html
    and where it says "Download J2SE v 1.4.2_02", click on the word DOWNLOAD in the column headed "SDK" in the row "Windows Installation (info)".

  • NEED HELP BADLY ON SOME FUNNY ERROR

    "This installation package could not be opened. Verify that the package exits and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
    I NEED HELP! I TRY TO INSTALL BUT CANT! what happen anyone noe? can anyone pls help me out with this problem? this is what happen when i try to open the file and install. it just cant open and it will show me that msg on top

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • ITunes and Windows Installer Package - HELP!!!!

    I've seen my question, which is also MY problem, that Windows Installer Package will not allow ITunes to download. I've read several posts on possible "fixes" in several forums, and have yet to resolve my problem. Anyone know how I can fix this? I would REALLY appreciate the help.

    it says there is a problem with this windows installer package, a DLL required could not be run
    With that one, even though you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • 'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

  • I need help badly really I do!!!!!!!!

    When ever I open itunes right before it opens it comes up with a info thingy saying itunes library.it is damaged or someting like missing.....I haven't done anything and then the **** thing doesn't even save everyting in the library after it takes me ages putting it back into itunes cus when I open it....it aint there nothing is help???

    Hi and welcome to Discussions,
    hold down the 'Option/Alt'-key at startup of your Mac and in the then appearing Selection screen choose to boot from your Windows CD to try to repair your BootCamp Windows Installation.
    The same key can be used to boot of your Mac OSX DVD (or hold down the 'C'-key at startup).
    Regards
    Stefan

  • T400 + WIndows 7, need help with drivers

    Hello.
    I have just installed a copy of W7 Pro on my T400 but i got some devices in the device manager which i do not know what is.
    I Have installed "everything" from http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-72858
    but I could not install the following:
    -Local Manageability Service and Serial Over LAN (Intel AMT 4.0) Windows Vista, XP
    -Management Engine Interface (Intel AMT 2.6) Windows Vista, XP
    The first i managed to install by going to the intel site and download the newest version but the second one wont install nor will the version on the intel download site.
    So far i have the following devices missing drivers:
    3xBase System Device
    PCI Serial Port
    PCI Simple Communications Controller
    Hope you guys can help me.

    Hi Wouz,
    I am sorry that the windows 7 drivers are not fully released yet but we have some beta version of drivers. Please check if you can find what you need here. However, it does not cover all of Lenovo products as yet. Lenovo has a large amount of product models to support. Please bear with us and we shall release the drivers soon after the Windows 7 launch in 22nd Oct 2009.
    Thank you very much for your patience.
    Best regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • How do I find lost photos after Image Capture failed to import them to iPhoto?

    im having this problem exactly .... http://hints.macworld.com/article.php?story=20101215095521610 i chose to delete after import, like a wise guy, thinking nothing was going to happen and now my photos are not in my iPhoto libary... ive gone through

  • Notes on Sql Developer - Importing - XLS

    This isn't really a question, but I thought I should get the record of my tribulations posted so someone else won't have to work as hard as I did. Please note when using import in sql dev - first, the file MUST be a xls formated BINARY file. I receiv

  • Titles in FCP

    Having some issues with text not looking very good after exporting a QT movie from FCP. It's a DV timeline.

  • Submitted form emtpy under Acrobat Reader 9 (Mac OS X only)

    Hi I have a problem sending a form by a submit button (also by scripting) to a webserver. I'd like to submit the form as a PDF (not FDF or anything else). I either used a submit button or code like below: > this.submitForm({ cURL: "sample.org/inbox",

  • Hard drive for mac mini early 2009 model

    Hi, My hard drive stopped working, and I would like to purchase a new one. After checking with several vendors, I could not get an official answer if their drive is supported by Mac Mini early 2009 model. Can you please advice what hard drive vendors