Windows installer popup in certain page

Hi
when I open some page in ie 11 I get a quick windows installer popup and then it disappear what is that ?
Thanks

Hi,
The Windwos installer popup means that there are some programs need to be installed.
Does the behavior persist if you start IE in No Add-ons mode? Start > (All) Programs > Accessories > System Tools > Internet Explorer (No add-ons).
If no errors occur, the problem is caused by one of the add-ons that typically load together with Internet Explorer.
You may also try to use the Windows Installer CleanUp Utility or the hotfix below to check the issue:
The Windows Installer CleanUp utility deletes all files and registry settings associated with a program's Windows Installer configuration.
Fix problems that programs cannot be installed or uninstalled
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Does NOT remove an application, allows you to re-install one.
http://technet.microsoft.com/en-us/magazine/2008.08.utilityspotlight.aspx
I also would like to suggest you remove any 3rd party anti-virus from your system.
In addition, please ensure the computer currently fully-patched at Windows Update.
Regarding the event you've found, most times it isn't an issue, try this on for size:
Troubleshooting DCOM:
http://technet.microsoft.com/en-us/library/cc751272.aspx
error: “The application-specific permission settings do not grant Local Activation “:
http://blogs.msdn.com/b/mutaz/archive/2009/02/11/error-the-application-specific-permission-settings-do-not-grant-local-activation.aspx?Redirected=true
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

  • Windows Installer Popup

    I Have a All-in-one Officejet J 6480
    Every time I start my computer "Windows Installer" popup appears to "Configure the Solution Centre" and looks for a disc but mine is out of date so I can't use it.
    It says the solutioncentre.msi is missing?. It goes away if I cancel it a few times but it bugs me. As far as I can figure it's a Windows Installer problem.
    If any one has this problem and knows how to fix it please let me know.
    Thanks Videz
    This question was solved.
    View Solution.

    I have a similar problem.  In my case I am running an HP Photosmart C7280 All-In-One.  The PC is an HP Pavilion. 
    In using the recovery disks, is it possible to isolate the startup repair?  I was always of the understanding that using the the computer's recovery disks would entail the deletion of all files and software such that the user would start with a blank slate, similar to obtaining a new computer.

  • Windows Installer Error after downloading Adobe Elments 9

    I downloaded your Adobe Photoshop Elements 9 about ten days ago and immediately after downloading I received two  Pop UP  problems that I have been unable to resolve.  One of the problems Is 1) I get a "Windows Installer"  popup each time I start my computer and 2). Windows
    Hoist has stopped working.
    I have researched all resources and find the only solution is to wipe my computer clean and reinstall everything.
    My computer is a HP Pavillion dv8000, Windows Vistaa 32 bit, SP 2.
    Please advise if you  or any other member has efxperienced a similiar problem.
    Thank you in advance for your help in this issue.
    Sincerely,
    Charles Higginbotham

    Boot Windows in safe mode, uninstall PSE.
    Mylenium

  • Windows Installer and Desktop Software.... HELP ME PLEASE!!!

    Any help would be greatly appreciated...
    I have been reading every thread of every post pertaining to this subject and cannot get the *#%*#%*& program to install. I get the dreaded windows installer popup. I have tried deleting  everything, downloading windows installer manager, running every virus, spyware, adware utility program I have/has been suggested. I have tried installing Sprint specific software with the same ploblem. I have tried unzipping the file manually.
    This really cannot be that fricking difficult. Can someone please help explain to me wtf I am doing wrong?I really do not want to erase my harddrive and start over. But what options am I left with?
    windows XP, SP3
    A VERY frustrated BB user.
    Bill

    Hey billhino,
    Welcome to the BlackBerry Support Community Forums.
    Have you tried renaming the install-shield folder?  
    Go to C:\Program Files\Common Files and re-name the installshield folder to installshield_old
    Then follow this KB article to make sure there is no traces of BlackBerry software: www.blackberry.com/btsc/KB02206
    Then re-download BlackBerry Desktop Software from www.blackberry.com/desktop and install.
    Let me know if you run into any trouble.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • How to show modal window without popup in a web page using javascript

    Hi,
    How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
    pls help me.....

    Thanx for ur reply,
    Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page...

  • Popup window  opens in the second page  - plz help gurus.

    Hi All,
    I'm calling a transaction through ITS. There is a hyperlink in a report brings up PDF in the popup window. Popup window comes up in the second page of the report after closing in the first page of the report. Popup comes in all the consecutive pages of the report once I click on the hyperlink. This is really frustrating. Pls let me know if i need to do any configuration to avoid this problem. 
    Thanks,
    Kumari

    Hello Kumari,
    are you using the SAP GUI for HTML (webgui)? Normally, no hyperlinks are used except on documents inside an HTMLviewer (like in TX TRIP), or when Drag & Relate is activated.
    I suppose the link is part of a document that is shown in an HTMLviewer. Though this document does not belong to the ITS or the SAP GUI for HTML it uses ITS's URLs to address a new page or document. But, with this URL the status of the ITS or the application does not change, thus showing the popup over and over.
    If you have a tool to trace the HTTP protocol you can check for the URLs that are send on a particular action. I
    Best regards,
      TJ

  • How to popup an OAF page in a new window?

    Hi all,
    I hava a requirement to popup an OAF page in a new window when i touch a image .
    When i touch the image,popup a new OAF page ,and the orial page become invalid like LOV,
    there are some messageTextInput items and a 'Confirm' submitButton in the new OAF page,
    So how to popup a new OAF page and how to pass the values to orial OAF page when i press the 'Confirm' submitButton?
    Can anybody give me a detailed example pls?
    Tks,
    Edmund.

    Hi Ming,
    It seems that the page you are trying to open has some security access on it. Read Menus and Page Security in Dev Guide for more details.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                   

  • Popup message - Windows Installer tries to Install SolutionCenter.msi, but unable to find it.

    The message is from Windows Installer and says Please wait while the windows installer tries to install SolutionCenter.msi.
    But then it says it cannot find the file.  I cannot get rid of the message and don't know what to do.  It is hard to even get out of the popup message.

    HI MarcyS,
    What kind of printer do you have ?
    What operating system are you using ? 
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Acrobat 8 unable to update windows installer errorcode 1642

    I am facing a servere problem with updates to our CS3 DP installed clients as of this week and hence acrobat 8. The issue concerns both OS's Win XP pro 32 bit and Win 7 pro 64 bit. After succesfull install of CS3 DP, an update request results in a pop message:
    "There are no updates available at this time.
    Please note that some updates for the following products cannot be determined at this time:  Adobe Updater"  On the initial installe this popup is followed by a eventlog in Program eventid 1024, were the errrorcode 1642 is mentioned.
    I have read posts in here concerning the error 162 and tried a clean install on a brand new workstation win7 pro 64 without Acrobat reader and only fabrik installed windows updates thus i rule out any recently Microsoft updates coursing the issue. i have tried with combitions of older Acrobat reader  eg 9.1 as well as 10 all with the same result in the end "There are no updates available at this time." I haven´t tried the update to Adobe Updater to version 6.2 since it is for CS4, but i am almost certain that is this update that courses aour problems.
    Any hints or suggestions are welcomed..

    >> ... Acrobat v8 is no longer supported.
    So: this is completely excruciating. I've got an original Acrobat 8.0.0 installation CD, genuine purchase, with 24 character registration code. It installs properly, and has done so on every new OS installation since. Up to now the update process taking me from 8.0.0 to 8.3.1 had been tedious, but it has worked.
    Now, because a page in the calendar has turned, I'm stuck with 8.0.0? What a lunatic policy decision. Even if v8 was no longer supported or developed, updating to 8.3.1 shoulkd still be possible (I mean, it is necessary, if security is to ne maintained ...)
    Summarising:
    1)    Help -> Check for Updates results in the response
    "There are no updates available at this time. Please note that updates for the following products cannot be determined at this time: Adobe Updater"
    2)    Downloading ALL the updates 8.1.0 -> 8.1.7 -> 8.2.0 -> 8.2.6 -> 8.3.0 -> 8.3.1 from the download centre and starting at 8.1.0 yields:
    "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
    Is there something missing between 8.0.0 off the CD and 8.1.0 off the web? I'm absolutely raging.
    Fergus

  • I am trying to update iTunes but get this box message comes up, "Network error occurred while attempting to read from the file: c:/windows/installer/itunes.msi" I have be told to uninstall all iTunes then reinstall, if I do this will I lose my Library

    Looking on the net to solve this problem, it says
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    I have save all my iTunes on a CD.
    If I uninstall iTunes, will I lose my iTunes library and video and apps and inturn will I lose this off my phone..
    I have tryed to update my iPhone firmware as they said there is a new update firmware, it would not install this and put my phone into recovery mode and I had to use iPhone recovery fix to get it out of recovery mode, my iPhone did a back-up before it tried to update the firmware.
    Any idea's are welcome

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Can't install itunes due to a problem with windows installer package

    hello there i can't install itunes due to a problem with the windows installer package i found a page on this site (here is the link) http://docs.info.apple.com/article.html?artnum=304405 i done every thing on it and i still haven't been able to fix the problem i have tryed the following unstalling itunes deleteing the registry keys deleteing all the temp files disableing all anit-virus software and anit-spyware. runing cc clearner downloading a new installer for itunes and windows installer and the script thing. and trying to reinstall. nothing seems to work i don't know what else to do this is the error message i get when i try to install i tunes. "there is a problem with this windows installer package.
    A program required for thsi install to complete could not be run.
    Contact your suupport personnel or package vendor."
    Please Help i would be most greatfull for any advise given
    Message was edited by: Joe_TLC

    I pulled my brains out trying to figure this bug out and I may have a solution for you.
    All of it installed fine in my desktop, but a friend's laptop got the error you mentioned on quicktime, itunes, flash, officeXP and about anything else I tried to load for him.
    If you look in: C:\documents and settings\<username>\Local Settings\Temp there will be an iTunes install log...open it in Notepad and see if it isn't exiting with a 1619 error while running msiexec.exe
    If this is the case, this fix should work for you.
    Seems some configurations of XP (and possibly Vista) aren't allowing full administrator rights to the account you set up when you installed XP (even though User Editor says you do have those rights.)
    I read 2 MS articles and turned off simple file sharing, then gave ownership of the entire C: drive to the administrator. Logged the admin account off, logged his "admin" account in, and then gave rights to his personal directory to his account (c:\docs and settings\<username>)
    Once I did that, every install that had previously errored out performed flawlessly.
    The MS articles in question:
    http://support.microsoft.com/?kbid=316309 (1619 error)
    and
    http://support.microsoft.com/?kbid=308419 (how to set special permissions)
    Hope this helps!
    Doc

  • This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

    Does anyone know, how to fix  ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

    At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Bootcamp assistant doesn't restarts to the Windows installer. Macbook pro 13" (early 2015)

    I'm trying to install windows 8.1 on my new macbook pro 2015, things are good until I got to the point after I chose the size of partition then mac restarts. It supposed to reboot to windows installer as described in step 4 below, but it boots into mac.
    I was able to install the windows to my macbook air before without a problem, hope someone could suggest what I did wrong here.
    Followed exact steps from here - How to install Windows using Boot Camp - Apple Support
    1. Check System Requirements
    Some versions of Windows require a certain processor, and more hard drive space and memory (RAM) than others. Check the documentation that came with your copy of Windows to find out what you need. Then use System Information to see what your Mac currently has.
    2. Create a disk image of your Windows disc
    When you purchase Windows, it either comes as a disk image file (ISO) or as an installation disc. If your copy of Windows came on a DVD, you should create a disk image of your installation disc.
    3. Open Boot Camp Assistant
    Boot Camp Assistant walks you through installing Windows on your Mac. Open this app from the Utilities folder in the Applications folder and follow the onscreen instructions to automatically repartition your startup disk and download related software drivers for Windows. When prompted, connect your USB flash drive.
    4. Format your Windows partition
    When you complete the assistant, your Mac restarts to the Windows installer. When you're asked where you want to install Windows, select the BOOTCAMP partition, then click Format.
    5. Install Windows
    Follow the onscreen prompts to finish your Windows installation.
    6. Restart your computer
    After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer

    Ok, I finally got the problem solved. It didn't mention anywhere that I have to restart and holding down the 'option' key, then go to EFI boot... hope it'll help someone with the same issue.
    Cheers!

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Maybe you are looking for