WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER
Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.
halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Similar Messages
-
Error synching Windows 7 Contacts with Desktop Manager
Hi
I'm new here and would appreciate any help you can give.
I''m having trouble synching the email addresses in my Windows Contacts file with my Blackberry. Not all email addresses synchronise properly, which is probably because they are sourced from several different databases previously. There doesn't seem to be a way to map the fields accurately as the Windows 7 contacts folder shows the field as "E-mail Address" and the Desktop Manager shows the field being imported from Windows as "Preferred Address". This mapping only transfers those addresses which were previously exported from a BB/Lotus Notes database.
I've tried exporting to csv's and changing the field names as well as importing through Outlook 2010 rather than WIndows but with no success.
Has anybody else had this problem and found a solution?
Any advice or suggestions welcomed.halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
DW CS4 with Windows 7 - problems with Extension Manager
Hi
I am new to this forum and have searched to see if anybody else has had this issue but can't find it.
I have recently installed CS4 on a Windows 7 laptop. I had originally downloaded and installed it on an XP laptop where it was all fine.
I had some problems with installation with the unlocking of the serial number on the new laptop - this was resolved by Adobe support.
However now I am trying to install extensions and get the message that the Extension Manager is unavailable and I have to re-install.
I have tried to contact Adobe using the Support portal but my post has been there for 4 days and I have had no response. I have just tried to call and after 12 minutes of being on hold - when the wait time was supposed to be 1 minute - I gave up.
Can anyone help with this. Does this mean an uninstall then re-install again? In which case I will have the same serial number issue that I had before. Or is there any other way I can install the Extension Manager?
Would really appreciate any help.I had a somewhat similar experience with the 4.2.1 upgrade with my computer. With my Q6600 running at 3.2 GHz, Vista x64 and with PPro CS4/4.1 update, I ran the PPBM4 benchmark and scored an 83.8. I then installed Win 7 x64, clean install etc… and re-ran the PPBM4 benchmark, with the same 4.1 update and with all system configurations the same as before, my score improved to 68.8, fantastic! I was very impressed with Win 7 x64.
This was short-lived because I updated PPro from 4.1 to 4.2.1, re-ran the PPBM4 benchmark and my score fell to 83.1 seconds, not impressed with the 4.2.1 update as far as this benchmark was concerned. I replaced the Q6600 with a Q9450, also over clocked to 3.2 GHz and with Win 7 x64, ran the PPBM4 benchmark and scored a 68.1; I got back everything I had lost in system speed from the 4.2.1 update plus some.
The Q6600 does not have the SSE4 instruction set while the Q9450 does. Perhaps the 4.2.1 update benefited CPU’s with SSE4 while those CPU’s without it, took a performance hit, just a guess. -
Installation problem with Enterprise Manager Console
When i am installing 10G database installation was failed at configuring DBConsole. later from OUI(Oracle Universal Installer) i uninstalled Enterprise Manager Console. my Question was how to reinstall the Enterprise Manager Console alone?
When i am trying to install from OUI. it is not allowing me to install Enterprise Mager Alone (stating Database is mandatory) .
for more information on dbconsole failure you can refer following log file
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log.
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: DBSNMP
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1923985629
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:39 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:40 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 agentHome: null isCentral: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle1\product\10.2.0\db_1\oui
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [D:\oracle1\product\10.2.0\db_1]
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle1\product\10.2.0\db_1
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file D:\oracle1\product\10.2.0\db_1\install\staticports.ini
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: D:\oracle1\product\10.2.0\db_1:H1B-6F175-9JVJ.GDNINDIA.COM:null:Embarq:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_Embarq value: 3938
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_Embarq value: 1158
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_Embarq value: 5540
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_Embarq value: 5520
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: Embarq : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully granted priviliges to dbsnmp.
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocked mgmt_view account
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:49 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties ...
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Copying OC4J config files from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\application.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\data-sources.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\data-sources.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\global-web-application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\global-web-application.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\internal-settings.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\internal-settings.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\java2.policy to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\java2.policy
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn-data.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn-data.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\mime.types to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\mime.types
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\oc4j-connectors.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\oc4j-connectors.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\principals.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\principals.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\server.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\META-INF\MANIFEST.MF to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF\MANIFEST.MF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\application-deployments\default\defaultWebApp\orion-web.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp\orion-web.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Finished copying OC4J config files
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Using specified listener name: LISTENER
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml ...
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [COMPUTERNAME=H1B-6F175-9JVJ, NEED_EXIT_CODE=1, ORACLE_SID=Embarq, PATH=D:\oracle1\product\10.2.0\db_1\jdk\jre\bin\server;D:\oracle1\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;d:\data\notes;c:\program files\notes, SystemRoot=C:\WINDOWS, TZ=, WINDIR=C:\WINDOWS]
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: D:\oracle1\product\10.2.0\db_1
Destination (shared install) : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
Service "OracleDBConsoleEmbarq" create SUCCESS
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [LD_LIBRARY_PATH=D:\oracle1\product\10.2.0\db_1\lib32;D:\oracle1\product\10.2.0\db_1\lib;D:\oracle1\product\10.2.0\db_1\perl\lib;null, PERL5LIB=D:\oracle1\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle1\product\10.2.0\db_1\bin;]
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: D:/oracle1/product/10.2.0/db_1
Destination : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Creating directories...
Creating targets.xml...
Done.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleEmbarq
Sep 27, 2007 3:23:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details.
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)There is a log file referred at Refer to the log file at "D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details."
Check the contents of this file.
Out from the log you posted I can see it is a windows platform. One common issue with windows and EM is the lack of a fixed IP Address. If this is the case configure a loopback adapter.
In the mean time, you don't need to have checked the configure EM DB Control from install time, you can skip this configuration and perform it later, so at least you have a working database just to start.
~ Madrid -
Windows installation problem with Bootcamp
Since a few days I have a new iMac 21,5 (end 2013) Maverick latest version installed as I had on my "old iMac" I tried to instal Windows 8 or Windows 7.
Use the bootcamp and set the right size for my windows part, and download the drivers all goes well. After the iMac reboot comes up with the setup from Windows
ask the keyboard settings and than shows the partitions. Select partition 4:BOOTCAMP. Here starts the problem, I do not see the advance drive options, as also the "NEXT" button is not selectable. As I format the partion also "NEXT" button is not selectable. I am stuck here, please help :-)I got stuck with the same error and spent a long time trying to work this out. It turns out that the issue is your USB3 stick. I'm not sure how it gets so far into the installation, but it seems that the USB3 drivers aren't available to the Windows installer.
Try again with a USB2-only drive and you should find that Windows will install fine. -
Backup problem with Desktop Manager 6.1.0.35
I've got a great problem here. DM is set to backup my BB on connection. Backup is hanging at "Backing up RMS databases 11 of 13 records". The only way to get out of it is to shutdown DM on My PC and reboot my BB.
I can't get in to device options on DM to stop auto backup because it tries to backup every time i connect. I'm stuck in a very nasty circle.
Have tried repairing my installation of Desktop Manager 6.1.0.35 through Control Panel bu that made no difference.
Would be very appreciative of any ideas.Since I can't duplicate this problem on my PC what about running the DM on your PC and not connecting your Storm.
When the DM is open go to 'Tools' and select 'Desktop Options' and make sure none of the boxes are selected and then try "Restore Default Settings" which should select these locations:
My Documents\BlackBerry\Backup
C:\Documents and Settings\Owner\Application Data\Research In Motion\BlackBerry Desktop
Now plug in your Storm. Is it still trying to make a backup? If 'yes', hopefully ViciousFerret (BlackBerry Technical Advisor) will notice my improper response and will advice you better. Just trying to help and get his attention....
Another way to get attention and a (quick?) answer is to tweet to the Twitter account @BlackBerryHelp. Haven tried it but red about it. -
Problem with Desktop Manager version 6
use a BlackBerry Curve 9300. I am having great difficulty downloading and running the version 6 Desktop Software. The software itself seems to downlaod quite successfully in about 30 minutes and a Desktop icon appears on my computer desktop. Each time I double click to open - run the programme an error message comes up as Follows"Desktop manager has encounterted a problem and needs to Close"sorry for the inconvenience etc.
I have uninstalled and re-installed the programme more than once to no avail and I just cannot get the programme to run.
I have seen a post/ posts where it was suggested that the way round this was to go into programe manager- locate and delete the folder" Research in motion" I have tried doing this- the folder is deleted it goes into the recycle bin and there is therefore no program to be opened- so something is not right here- maybe I am not reading the advice correctly.
Would appreciate adny help , advice and support from my experienced users in this community as it is very frustrating not to be able to run the the Desktop software.Hey Oscarfabricant,
Welcome to the BlackBerry Support Community Forums.
What version of Windows are you using? Is it 64-bit?
Also for the uninstall I would suggest performing all the steps in this article: www.blackberry.com/btsc/KB02206
Then download Desktop Software from www.blackberry.com/desktop and install it. Restart and then to run the application.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Problem with Desktop Manager Synchronisation
I have version 4.7.0.25 running on Vista. When synchronising it reads the calender etc on the device OK but as soon as it reads the desktop calender it freezes with message 'Desktop Manager Stopped Working'.
I have reloaded the software several times
Any suggestionsHey Oscarfabricant,
Welcome to the BlackBerry Support Community Forums.
What version of Windows are you using? Is it 64-bit?
Also for the uninstall I would suggest performing all the steps in this article: www.blackberry.com/btsc/KB02206
Then download Desktop Software from www.blackberry.com/desktop and install it. Restart and then to run the application.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Problems with Desktop Manager v5.0
Hey! Sorry if this has been asked before but i've been google searching with no luck.
I bought a BlackBerry Curve 8520 today and I'm having trouble with the Desktop Manager. I used the disk that came with the phone and installed v5.0. The Desktop Manager itself seems to be working fine and recognises my phone no problem, but the Media Manager isn't working. When I click "Launch" on the Media Manager I get the error message "Roxio Easy Media Creator: The certificate file is missing or has been corrupted. Please re-install it." I've tried reinstalling and repairing the software but still get the same error message. Does anyone know how I can fix it?
Thanks in advance!Hi and Welcome to the Forums!
Easy Media Creator is not, to my knowledge, part of the RIM released desktop software (with Media Manager). What that tells me is that you have another type of Roxio software on that PC...and that has been known to cause odd problems, such as what you are experiencing. If you don't need Media Manager, then I encourage you to download the version of the RIM DTM software that excludes Media Manager. You can obtain that here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Otherwise, you'd likely be advised to remove that other Roxio software in order to install DTM with Media Manager.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Problem with desktop manager/phone.
when i connect my blackberry curve 9360 to desktop manager, my phone screen has a picture with the phone and computer pointing each other with the arrows to show it is connected/connecting. when i start to back up my phone, these arrows go away. my phone is just 6 months old and works perfectly fine.
Try these steps:
1. Uninstall Blackberry Desktop with Media Manager
2. Restart computer
3. Install Blackberry Desktop with Media Manager
If your version won't work you may try different versions of "Blackbery Desktop With Media Manager".
You may download these versions here
if your issue solved set "Solution" mark at the relevant post -
Installation problem with Solution Manager 4.0 on Windows 2003/Oracle 10.2
Hello,
I'm receving the following error message while running SAPinst on step 11 Create Database:
ERROR 2007-05-31 23:20:32
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
OLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 23:20:32
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 23:20:32
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
I've read the log file referenced above and did not find any additional details.
I'll post the entire log below as well:
INFO 2007-05-31 15:05:44
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.4.xml'.
INFO 2007-05-31 15:05:45
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.5.xml'.
INFO 2007-05-31 15:05:52
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-05-31 15:06:11
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2007-05-31 15:06:11
Execute step runCatprocSql of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0.
INFO 2007-05-31 15:06:16
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 15:06:16
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 15:06:18
Switched to user: sm1adm.
INFO 2007-05-31 15:06:18
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-05-31 15:07:03
Switched to user: sm1adm.
INFO 2007-05-31 15:07:06
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
ERROR 2007-05-31 15:21:34
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
SQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_table
SQL> Rem liwong 10/20/00 - add def$_destination.flag
SQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue table
SQL> Rem narora 09/13/00 - add comment on new def$_destination columns
SQL> Rem liwong 09/01/00 - add master w/o quiesce: fixes
SQL> Rem liwong 07/12/00 - add total_prop_time_lat
SQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_time
SQL> Rem liwong 05/17/00 - add_master_db w/o quiesce
SQL> Rem jstamos 05/17/00 - add_master_db w/o quiesce
SQL> Rem elu 01/24/00 - add column apply_init to def$_destination
SQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger on
SQL> Rem def$_propagator
SQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactions
SQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocks
SQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table for
SQL> Rem server-side RepAPI
SQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_table
SQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCY
SQL> Rem nbhatt 04/21/97 - change syntax of create_queue
SQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}
SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typo
SQL> Rem jstamos 04/10/97 - remove unneeded indexes
SQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetable
SQL> Rem jstamos 04/04/97 - tighter AQ integration
SQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldest
SQL> Rem ato 03/31/97 - create_qtable interface change
SQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorder
SQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerror
SQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcall
SQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_call
SQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)
SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcall
SQL> Rem liwong 01/07/97 - Alter default value for batch_no
SQL> Rem jstamos 12/23/96 - change temp$nclob col
SQL> Rem jstamos 11/21/96 - nchar support
SQL> Rem sjain 11/11/96 - Remove dummy buffer # comment
SQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerror
SQL> Rem sjain 11/06/96 - deferror changes
SQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lob
SQL> Rem sjain 10/02/96 - Aq conversion
SQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key index
SQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclob
SQL> Rem sjain 09/03/96 - AQ converson
SQL> Rem ademers 08/02/96 - queue_batch default in def_destination
SQL> Rem ademers 07/29/96 - queue_batch default in def_call
SQL> Rem ademers 07/29/96 - queue_batch default
SQL> Rem jstamos 07/24/96 - add system.temp$lob
SQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tables
SQL> Rem jstamos 06/12/96 - LOB support for deferred RPCs
SQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorder
SQL> Rem ademers 05/30/96 - create def_origin
SQL> Rem ademers 05/28/96 - fix def_destination col names
SQL> Rem ldoo 05/09/96 - New security model
SQL> Rem sjain 05/01/96 - add seq col to def_destination
SQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_call
SQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queue
SQL> Rem jstamos 08/17/95 - code review changes
SQL> Rem jstamos 08/16/95 - add comments to tables
SQL> Rem wmaimone 01/04/96 - 7.3 merge
SQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 15:21:34
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 15:21:34
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
INFO 2007-05-31 23:06:17
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql".
INFO 2007-05-31 23:06:18
Removing file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 23:06:18
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-05-31 23:06:18
Switched to user: sm1adm.
INFO 2007-05-31 23:06:18
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-05-31 23:06:20
Switched to user: sm1adm.
INFO 2007-05-31 23:06:20
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
ERROR 2007-05-31 23:20:32
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
SQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_table
SQL> Rem liwong 10/20/00 - add def$_destination.flag
SQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue table
SQL> Rem narora 09/13/00 - add comment on new def$_destination columns
SQL> Rem liwong 09/01/00 - add master w/o quiesce: fixes
SQL> Rem liwong 07/12/00 - add total_prop_time_lat
SQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_time
SQL> Rem liwong 05/17/00 - add_master_db w/o quiesce
SQL> Rem jstamos 05/17/00 - add_master_db w/o quiesce
SQL> Rem elu 01/24/00 - add column apply_init to def$_destination
SQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger on
SQL> Rem def$_propagator
SQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactions
SQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocks
SQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table for
SQL> Rem server-side RepAPI
SQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_table
SQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCY
SQL> Rem nbhatt 04/21/97 - change syntax of create_queue
SQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}
SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typo
SQL> Rem jstamos 04/10/97 - remove unneeded indexes
SQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetable
SQL> Rem jstamos 04/04/97 - tighter AQ integration
SQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldest
SQL> Rem ato 03/31/97 - create_qtable interface change
SQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorder
SQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerror
SQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcall
SQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_call
SQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)
SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcall
SQL> Rem liwong 01/07/97 - Alter default value for batch_no
SQL> Rem jstamos 12/23/96 - change temp$nclob col
SQL> Rem jstamos 11/21/96 - nchar support
SQL> Rem sjain 11/11/96 - Remove dummy buffer # comment
SQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerror
SQL> Rem sjain 11/06/96 - deferror changes
SQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lob
SQL> Rem sjain 10/02/96 - Aq conversion
SQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key index
SQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclob
SQL> Rem sjain 09/03/96 - AQ converson
SQL> Rem ademers 08/02/96 - queue_batch default in def_destination
SQL> Rem ademers 07/29/96 - queue_batch default in def_call
SQL> Rem ademers 07/29/96 - queue_batch default
SQL> Rem jstamos 07/24/96 - add system.temp$lob
SQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tables
SQL> Rem jstamos 06/12/96 - LOB support for deferred RPCs
SQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorder
SQL> Rem ademers 05/30/96 - create def_origin
SQL> Rem ademers 05/28/96 - fix def_destination col names
SQL> Rem ldoo 05/09/96 - New security model
SQL> Rem sjain 05/01/96 - add seq col to def_destination
SQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_call
SQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queue
SQL> Rem jstamos 08/17/95 - code review changes
SQL> Rem jstamos 08/16/95 - add comments to tables
SQL> Rem wmaimone 01/04/96 - 7.3 merge
SQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2007-05-31 23:20:32
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-31 23:20:32
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
Thanks in advnace for your help,
GlenWhat do you see in ora_sql_result.log? (the last lines containing the error)?
Markus -
Installation problems with Application Manager
i get these errors:
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 1649)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1649)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16nl_NLLanguagePack: Install failed
Can anybody help?Hello Kapil,
Yes, the installation succeeded now. But now another problem emerges when I try to install the Creative Cloud updates. The errorlog tells me this:
Adobe Media Encoder CS6 6.0.2-update
Installation failed. Errorcode: U44M1P7
Adobe Extension Manager CS6-update
Installation failed. Errorcode: U44M1P7
Adobe CSXS InfrastructureCS6
Installation failed. Errorcode: U44M1P7
I really don't have a clue of what I can do here. -
Problem with Desktop Manager 5.0?
When I go to use DM to load new apps, whatever they might be, I have noticed that the manager is wanting to reinstall the following: Blackberry 4.7 system software and Blackberry 4.7 core applications.
I have done no modifications to the OS, it is still the original form out of the box.
I have uninstalled DM per instructions found elsewhere, including the registry, rebooted computer and reinstalled software. Still happens.
Any suggestion on how I can avoid this happening? The check boxes for those options are greyed out, and can not be "unchecked."
Thanks for the advice!HI and Welcome!
Typically, that prompt is because some component of the core OS has been updated...and DTM is prompting you to allow (or not) doing that update to your BB. It's not re-installing...it's trying to update your BB core OS.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
HT4623 How can i solve installation problem with iOS 6.
How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!
can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs
Maybe you are looking for
-
I tried all my head phones and its the left side. This happened to me before, and I got a new one. I need help what I do? How do I fix this problem. If they do give me a new one do I have to buy the Apple Care again. Can they fix it. Wht am I doing w
-
My iPod is not playing the songs that I purchased from iTunes.
My iPod is not playing the songs that I purchased from iTunes.
-
CS3 / Server / Windows: Axis2 - Unexpected subelement scriptResult
Hi I call the Indesign Server from a web application using Axis2 (1.3.1) and a Javascript. This script calls my function, written in C++. I set the return in my plugin as follows: PMString sReturnError = sError.c_str(); ScriptData returnData;
-
No certificates included in signature
Dear SAP, 1. DJ9 - My portal 2. DL9 - My ECC6 ABAP system. 3. DL9 is defined as back-end system of DJ9. When I am connected to my portal (DJ9), I want to start "Employee Self-Service" menu which is running on DL9. When I click on ""Employee Self-Serv
-
I have X-Fi Xtreme Music sound card and want to connect to an external DolbyDigital, Dolby ProLogicII and DTS decoder and want to know would I hear the 24-bit Crystalizer effect through spdif? I do want that my mp3 sounds better but is the analog con