Windows Intune with SCCM 2012 R2.

Windows Intune with SCCM 2012 R2.
I am able to download Certificate Signing Request (CSR).
When I submit CSR file to Apple Push Certificates Portal I get following prompt:
Do you want to open or save create02fe592d.json (132 bytes) from identity.apple.com?
I am unable to get the APN Certificate.

That is a known issue with Internet Explorer and the Apple Website. If you just go back to the main page where all your certificate are located you can download it from there.
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Similar Messages

Integrate Windows Intune with SCCM 2012 R2

Does internet required for integrate and operate Windows Intune from SCCM ?

Sure. ConfigMgr has to contact the Azure service (Intune).
Torsten Meringer | http://www.mssccmfaq.de

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

Windows intune with SCCM

Can u tell me or share a link on step by step process to manage devices with SCCM using intune, I have the intune subscribtion.

There are many guides available online, here is an example:
http://www.windows-noob.com/forums/index.php?/topic/10905-the-windows-noob-microsoft-intune-mobile-device-management-guides-now-available-to-download/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Help understanding windows updates with SCCM 2012 R2

Hello all,
I am fairly new to SCCM in general and would like to know if I am doing things right with regard to Windows updates.
My setup:
I have one Windows 7 update group that has all updates as of about 3 weeks ago. That package is deployed to a win7 collection of machines.
I also have an ADR rule to create a new package containing new Windows 7 updates (within the past year) every month and deploy to the same collection. (I chose to create a new package due to the 1000 item limit in a package)
Will this setup work or am I doing something wrong here? I really want to know what best practices are related to configuring update packages/adr for windows updates.

More info:
Best Practices for Software Updates
http://social.technet.microsoft.com/wiki/contents/articles/11215.system-center-2012-configuration-manager-best-practices.aspx#Best_Practices_for_Software_Updates
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Intune, Windows 8.1, SCCM 2012 R2

Hello,
I am planning to setup a new infrastructure to manage devices using Intune and SCCM 2012 R2 for one of my customer.
We plan to have one single site, where in the devices will be imaged with Windows 8.1 and then will be provided to users who roam around the world.
We like to manage these devices and do:
1. Inventory
2. Software Distribution
3. Software Updates
4. EndPoint Protection
5. Reporting
I have come to learn that:
1. Add and verify company domain at account.manage.microsoft.com
2. Add UPN in AD
3. Run DIR Sync for Users
4. Configure Intune Subscription
5. Install Connector
6. Whats the next step for configuring Windows 8.1?
My questions:
1. Is Cloud based Distribution Point required for hosting content. If not, how will the devices download the content and install the app?
2. Do we need PKI for Windows 8.1 devices(enrollment and management)?
3. Where should I install Company App Portal?
4. What are the different ways of enrolling Windows 8.1 device (Workplace & Store)?
5. Any other info if you can share, really appreciate
Please advice
Rajiv

Hello Nico,
Thanks for the guidance.
1. Distribution Point: manage.microsoft.com - whats the disk size/storage available by default. Is it unlimited. As the Intune license is user based. I can have 5 devices enrolled per user. I may have loads of packages/apps.
5. Your apps need to be signed with certificate that's is trusted by your device : I guess when we import
an Application in SCCM, it never checks if it has a signed certificate. One would need to ensure that the cert is present.
Can I install software updates to devices managed using SCCM Intune?
We are planning to have a single site with a remote DP for building devices with Windows 8.1. Once the device is ready, it will be given to the user. The user will enroll the device and is good to go. I am sure we will be able to embed Company Portal App
into the build image?
Thanks
Raijv

Microsoft Intune and SCCM 2012 R2 Integration - Windows 7 clients.

Hi All,
This is our scenario I am trying to find out more about Intune integration with SCCM 2012 R2 and what solution is best for us.
We have a SCCM 2012 R2 instance up and running which services/monitors machines on our internal network. All of these machines are Windows 7 OS. We have laptops that travel frequently and need for these to report back to our SCCM server whilst connected
via internet connections. Also we have multiple "off domain" machines (ie workgroup machines) which we also need to report back to the same SCCM server.
I have read a lot about Intune integration with SCCM but it appears to be targetted at MDM not around PC management.
What would be the best way for us to move forward?
Thanks in advance.

Just see my reply in the ConfigMgr forums.
Torsten Meringer | http://www.mssccmfaq.de

AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

Hey
I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful.
The amtopmgr.log repeatedly shows the following entries:
Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
Found valid basic machine property for machine id = 16777325.
Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
The provision mode for device WS45.mydomain.ch is 1.
The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
Attempting to establish connection with target device using SOAP.
Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
Set credential on provisionHelper...
Try to use provisioning account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
Try to use default factory account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
Error: Device internal error. This may be caused by: 1. blabla...
Error: Can NOT establish connection with target device. (MachineId = 16777325)
After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
So the question is: How can I get SCCM 2012 to provision these devices?
Regards,
Ingo
[1]
http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Compatibility Windows 10 and SCCM 2012 R2

Hi,
Is SCCM 2012 R2 compatible with Windows 10?
Will we need to update MDT 2013 or if they will be a new version? What about USMT?
When may we expect to have a fully compatible solution for Windows 10?
Thanks,

Hi,
It is explained it this blog post
http://blogs.technet.com/b/configmgrteam/archive/2014/09/30/windows-10-enterprise-management-with-sc-configmgr-and-intune.aspx
I haven't seen any offical statement of how long after Windows 10 is released in RTM that these products will be released as well, as we are getting closer more information will come I assume.
And USMT is included in ADK preview that is available here:http://www.microsoft.com/en-us/download/details.aspx?id=45522
If windows 10 is compatable with SCCM 2012 R2, I would say yes it works is it supported no, as Windows 10 isn't released.
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Cost of Intune and SCCM 2012 r2 vs SCCM 2012 r2 ICBM

Is there any research/info on pros and cons of SCCM 2012 using intune for internet clinet management vs SCCM 2012 r2 and ICBM? Things like cost, supportabiliy, etc. I have seen intune vs sccm not Intune & SCCM vs SCCM and Internet Client
Based Management.
Cyndy

Hi,
I think the reason is that you cannot manage Windows clients using the WIndows Intune Agent and integrate it with SCCM 2012. The integration with Intune and SCCM 2012 is for Mobile Device Management only so there is no possibility to install the Windows
Intune Agent on a client and then manage it through the SCCM Admin Console.
THe only scenario where that would work is if you manage a Windows 8.1 with the OMA-DM agent and enroll them in Intune as a mobile device with a limited set of features.
So ICBM is still the way to go if you need all the features in SCCM or you want one console to rule them all.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Deploying CC Enterprise Applications With SCCM 2012

Hi all,
We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
Has anyone experienced a similar problem? Any ideas?
Thank you in advance.
Ryan

Windows 7 x64 Clients
Deploying with SCCM 2012
I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
Another problem that you might have is having users log out of the applications without admin previlages.
I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
Thank you

Deploymen fix with sccm 2012 R2

Hello Guys
I need deployment a patch in 235 windows 7 x86 and x64. I was created the package and also create a .bat file with the following contents
wusa.exe <fix.msu> /quit /norestart
The package is distributed but when is running appears a windows with the parameters of wusa
Who I can distributed this patch with SCCM 2012.
Thanks for your help
Regards

Hello
I running .bat file with the parameters
wusa.exe <fix.msu> /quit /norestart
In the station of user appears a messages with options of parameters wusa.
Exist other method?
Regards

Remote WSUS integration with SCCM 2012

Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in Advance

When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys

I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

Hi,
I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
I don't agree and I have not Heard this Before, just that you use TS for some scenario.
Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
/SaiTech

Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used.
Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
App-V allows you to run on multple O/S types.
To be honest both technologies have their pros and cons.
Cheers
Paul | sccmentor.wordpress.com

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Windows Intune with SCCM 2012 R2.

Similar Messages

Maybe you are looking for