Windows itune 7

I downloaded 7.0 when I try to itunes. it says:
Quicktime version 7.0d0 is installed, itunes requires quicktime version 7.1.3 or later.
Please re install itunes.
I downloaed again and choose repair. That did not fix it. I went to quicktime and there is a plugin error and the page closes..I have read through other errors but don't see this exact one...help I can go back to 6 too that's opk with me..how can I do that?

i had the same exact problem...i uninstalled itunes and quicktime and still nothing..now everytime i try to open itunes i get a message saying itunes has encountered a problem and needs to close....I CANT UPDATE MY IPOD OR ANYTHING
HEEEELP

Similar Messages

Ipod not recognized by windows, itunes, and will not charge with pc.

yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
-1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
-2nd, windows gave me a message saying the hardware could not be recognized.
-3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

IPod not recognized by Windows / iTunes

Hello,
I hope someone here can help. So far my first experience with Apple support has NOT been a positive impression.
I searched for info on this problem, but the other ones I see all seem to be related to freezing or battery issues.
iPod Classic 120GB, I don't sync very often, and just finished doing a bunch of cleanup in iTunes (album artwork, song info, etc.) and want to re-sync the pod.
When I connect to the PC with the USB cable, Windows doesn't seem to recognize the device, and it doesn't show up in iTunes.
It is charging through USB, however. The battery is fully charged.
I tried 3 different USB ports on the PC.
Tried restarting iTunes.
Tried restarting the computer.
Went to Apple support website, tried the troubleshooting assistant:
Reset the pod.
*Had already tried different USB ports.
*Had already trired restarting the PC (Although it mentions checking for the latest software updates - I didn't do this. WHAT software updates should I look for? Device drivers? OS updates? WHAT???)
Re-installed iTunes. (Was already at v 9.2.1.4)
*Did not try the restore. Reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
Also read something about disk mode. I set the iPod to disk mode, but it's not recognized that way, either. When connected by USB in this mode, the iPod screen still says "OK to disconnect".
I tried the link "iPhone, iPad, or iPod is not recognized by Windows".
I do not see the "Apple Mobile Device USB Driver" anywhere in Device Manager. I suppose this is the problem.
However, continuing with the instructions, it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC?????
(These instructions also say to disconnect the device, but nowhere says when to connect it. Why do they put half-baked troubleshooting instructions on their web site???)
Is there anyone from Apple support on this list who can help? I believe the driver needs to be reinstalled somehow, but it didn'thappen when i re-installed iTunes, so how do I do this?
Thanks
Keith

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

Lost all Playlists in MAC iTunes AFTER Upgrading Windows iTunes to v.10.7 (via Parallels) - HELP!

I HAVE iTUNES v 10.6x installed on my Macbook Pro - been using for quite awhile without issues. All Updates to iTunes have gone just fine. I also use Parallels Desktop with Windows XP Pro installed on it and within that Windows installation on this Mac, I have installed many software programs -- all okay for over 3 years - no real issues. I also have installed iTunes in the Windows, but never really used the Preferences of iTunes to use its Advanced settings to change the location of the Library to the same location of the Mac's iTunes -- the Library is on an external HD. The use of iTunes in Windows was never really used because I never had the right location of the Library set in Preferences.
About 5 days ago, while in Windows XP, I got an Apple Software Upgrade Notice that a new version of iTunes was available for download -- Version 10.7. Not thinking about it then, I told myself that when I finished upgrading inside Windows that I would exit Windows and while in Macbook Pro's OS X 10.5.8, i just knew there would be an Apple Software Update Notice to also update my Mac's iTunes to version 10.7 also. That's what I planned to do while still in Windows. While installing the update to version 10.7 within Windows, I thought I'd try to set the proper location for the Library file using iTunes' Preferences and Advance Tab. I finished the upgrade to 10.7, went into Preferences and Advanced Tab and did just that and set the correct location on the external harddisk then tried to play songs using my Windows XP's upgraded iTunes. IT WORKED JUST FINE.
I now exited from Windows and went back to straight Macbook Pro OS X 10.5.8 and tried to check for this upgrade for iTunes from 10.6x to 10.7 by going to the Apple Website and downloaded this from there. When I then attempted to install the downloaded 10.7 (to replace/update my 10.6x) it would not install because my OS X 10.5.8 is not useable for the new 10.7. Okay, I'd just use my tried and true version 10.6x. WRONG!!!!!
When I attempted to open my iTunes on the Mac, it would open, but all my normal screen views were gone -- NO PLAYLISTS WHATSOEVER. The Music folder (the Library?) was fine but all songs had the infamous "!" MARK next to each and every song -- not playable. So, remembering the Library location setting in Preferences was the way to "reset" iTunes so the Library would be recognized and useable, I went into Preferences and reset the Library to the proper and same location as it always had been (and, where I had just previously set the Windows' iTunes to). Now the "!" marks were gone and each song in the Music Folder played just fine. BUT, NO PLAYLISTS WHATSOEVER. ALL MY ORGANIZATION EFFORTS FOR YEARS WAS GONE!!!
My thoughts are that the Windows iTunes upgrade to 10.7 changed some key iTunes files common to both operating systems on the Macbook Pro, Parallels Desktop, and Windows XP installation -- some Windows iTunes program files are kept and store in the same default location as the Mac's and on the internal hard drive of the Mac.
Because, in further researching this problem, I found that the "iTUNES LIBRARY.itl" file located on the Mac's hard drive had, in fact, been changed by the Windows iTunes upgrade to 10.7!!!!!! THOSE CHANGES "CORRUPTED" THIS FILE TO USE IN THE MAC iTUNES PROGRAM AND THE PLAYLISTS ARE GONE. I also use this software in this effort: PARALLELS DESKTOP VER 7.X, FULLY UPDATED WINDOWS XP PRO, FULLY UPDATE AS MUCH AS APPLE HAS PROVIDED TO MY OS X 10.5.8 (I CAN'T UPGRADE TO LION), AND OF COURSE iTUNES 10.6x.
THEREFORE, WHAT EXACTLY SHOULD/COULD I DO TO GET THE PLAYLISTS BACK INTO MY MAC OS X 10.5.8 iTUNES? I DON'T CARE TO USE THE WINDOWS iTUNES ANYMORE -- I'LL JUST STAY WITH MY MAC'S. PLEASE HELP!!! THANK YOU.
LARRY HAMILTON

Ok, now main problem is with Apps only.. problem is with msg. Iphone is sync with other library, do you want replace apps on this Iphone ??
I already took all my apps to the computer...
So... I need just sync Iphone with this new library and do not remove any app from Iphone...
how to do it please?

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

You can red this article about transfering your tunes - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
MJ

My ipod 3rd generation is not recognized by windows/itunes,please help

My ipod 3rd generation is not recognized by windows/itunes,please help. Have tried restoring a number of times but did not work, any suggestions?thanks

Start with this Apple support document.
http://support.apple.com/kb/TS1369
B-rock

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Ex-Mac user now on Windows 7: How to acccess my iTunes library (now on my PC) with my Windows iTunes?

I'm an ex-Mac user now on Windows 7: How to acccess my former Mac iTunes library (now on my PC) with my Windows iTunes? I get error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.
Can anyone help me please?
Roy

So, what I have done so far to try to achieve this is:
I have my Windows PC with it's NTFS formatted external HDD containing the music etc.
I have my Mac with a new external HDD formatted in Mac OS Extended (Journaled).
On the Windows PC:
* I opened up iTunes.
* Went into Preferences, and then under the Advanced tab I checked both 'Keep iTunes Media Folder Organised' and 'Copy files to iTunes Media folder when adding to library', so that all the files would be in the main iTunes Media folder when I copy it over.
* Then File, Library, Organise Library and ticked the 'Consolidate Files' so that it moves any files that aren't in the right folder.
Next I copied the files over. So I copied the updated media folder from the NTFS (Windows) external HDD onto the Mac external HDD.
And I copied the files from in My Documents/Music/iTunes on the Windows PC to User/Music on the Mac.
But this doesn't seem to have done it.

Hey Apples Users, my iPod 80 GB ins not showing in windows, itunes and my computer

hey Apples Users,
my iPod 80 GB ins not showing in windows, itunes and my computer
Could anyone in there show me the best solution for the same
thanks in advance

First of all does, the iPod power on okay?
Have you tried plugging the iPod into a different USB ports, preferably a high powered USB 2.0 port on the back of your PC tower (these are directly soldered onto the motherboard and receive much high outputs of power than the ones on the front).
What about a different USB sync cable?
What shows up on the iPod's screen when you connect it? Does it charge at all? Maybe try resetting it with it still connected to your PC. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?

Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?
Jan

Dear Experts,
I Developed Screen-exit For IW51 t.codeTypically the custom fields are displayed in the notification on a separate tab, or at the bottom of the u201CGeneralu201D or u201CMainu201D tab. These are configuration decisions that could be made in the build phase.
Sets of custom fields need to be added based on the notification type. The following table provides a list and details of the custom fields required. The table to be extended is the VIQMEL table (to be verified by developer).
Also to extend header fields on the notification you need to include them in the include CI_QMEL where OPEX M&I has already fields in.
All fields should go on the notification header. There are no custom fields on the task or activity level.
All fields should be reviewed for consistency with the M&I design, specifically, Thomas Brothers, Atlas Sheet, district code. See Dale Alano.
Please any Body Helped Coding For this, Already i Created Customfields , I design Subscreen also using Enhancement QQMA0001. Using Exit name EXIT_SAPMIWO0_008 USIN SUBSCREEN 0104 PLEASE ANY BODY help me Coding for this IW52
Regards,
Santosh Ballyapelli

AppleScript error with iTunes: Can't get window 'iTunes' of class pcap ...

Hi there. I'm working on a script that posts iTunes track names to Campfire based on the AirPlay device in use. I've been getting a "Can't get window 'iTunes' of <<class pcap>> 'iTunes' of application 'System Events'" and was hoping someone might see an obvious answer. The error pops up randomly. Some machines receive the error much more often than others. Here's the code:
global current_track
global last_track
global campfire_token
global airplay_device
global campfire_room
global current_device
(* Begin user defined settings ************)
set campfire_token to "123456" (* Your Campfire API authentication token *)
set airplay_device to "Apple TV" (* The name of your AirPlay device *)
set campfire_room to "https://yourorg.campfirenow.com/room/123456/speak.xml" (* The Campfire room you'd like to post to *)
(* End user defined settings *************)
set current_track to ""
set current_device to ""
set last_track to ""
on idle
          if application "iTunes" is running then
                    tell application "iTunes"
                              if player state is playing then
                                        tell application "System Events"
                                                  tell application "iTunes"
                                                            set minimized of front browser window to false (*This AppleScript can only function when iTunes is not minimized. *)
                                                            delay 2
                                                            set visible of front browser window to true
                                                            delay 2
                                                            set current_track to current track
                                                  end tell
                                                  delay 2
                                                  set current_device to the description of button 8 of window "iTunes" of application process "iTunes" of application "System Events"
                                        end tell
                                        delay 2
                                        if current_track is not equal to last_track then
                                                  if current_device as string is equal to airplay_device & " AirPlay" then
                                                            tell application "iTunes"
                                                                      set current_track to current track
                                                                      tell current_track
                                                                                set trackName to (name)
                                                                                set artistName to (" :: " & artist)
                                                                                set albumName to (" :: " & album)
                                                                      end tell
                                                                      set track_info to (trackName & artistName & albumName) as string
(* Replace apostrophes *)
                                                                      set search_string to "'"
                                                                      set replacement_string to "'"
                                                                      set AppleScript's text item delimiters to the search_string
                                                                      set the item_list to every text item of track_info
                                                                      set AppleScript's text item delimiters to the replacement_string
                                                                      set track_info to the item_list as string
                                                                      set AppleScript's text item delimiters to ""
(* Replace quotation marks *)
                                                                      set search_string to "\""
                                                                      set replacement_string to """
                                                                      set AppleScript's text item delimiters to the search_string
                                                                      set the item_list to every text item of track_info
                                                                      set AppleScript's text item delimiters to the replacement_string
                                                                      set track_info to the item_list as string
                                                                      set AppleScript's text item delimiters to ""
                                                                      set shellCommand to ("curl -u " & campfire_token & ":X -H 'Content-Type: application/xml' -d '<message><type>TextMessage</type><body>" & track_info & "</body></message>' " & campfire_room)
                                                                      set shellCommand to shellCommand as string
do shell script shellCommand
(*display dialog shellCommand*)
(*log "Posting to Campfire:" & shellCommand*)
                                                            end tell
                                                            delay 2
                                                  end if
                                        end if
                                        set last_track to current_track
                              end if
                              return 1
                    end tell
          end if
end idle
Thanks for your help. Any suggestions are appreciated!

well, for information's sake, the cleaned-up script looks like this:
(* Begin user defined settings ************)
property campfire_token : "123456" (* Your Campfire API authentication token *)
property airplay_device : "Apple TV" (* The name of your AirPlay device *)
property campfire_room : "https://yourorg.campfirenow.com/room/123456/speak.xml" (* The Campfire room you'd like to post to *)
(* End user defined settings *************)
global current_track, last_track, current_device
on run
(* init at runtime*)
          set current_track to ""
          set current_device to ""
          set last_track to ""
end run
on idle
          if application "iTunes" is not running then return 60
          tell application "iTunes"
                    if (player state is not playing) or (current track is equal to last_track) then return
                    set last_track to current track
                    set minimized of front browser window to false
                    set visible of front browser window to true
                    set current_device to my getDevice()
                    if current_device as string is not equal to airplay_device & " AirPlay" then return
                    set track_info to my mungeText({name, artist, album} of last_track, "", "::")
                    set track_info to my mungeText(track_info, "'", "'") -- Replace apostrophes
                    set track_info to my mungeText(track_info, "\"", """) -- Replace quotation marks
                    set shellCommand to ("curl -u " & campfire_token & ":X -H 'Content-Type: application/xml' -d '<message><type>TextMessage</type><body>" & track_info & "</body></message>' " & campfire_room)
do shell script (shellCommand as string)
(*display dialog shellCommand*)
(*log "Posting to Campfire:" & shellCommand*)
                    return
          end tell
end idle
on getDevice()
          tell application "System Events"
                    tell process "iTunes"
                              return description of button 8 of window "iTunes"
                    end tell
          end tell
end getDevice
on mungeText(itxt, stxt, rtxt)
          set tid to AppleScript's text item delimiters
          if class of itxt is text then
                    set AppleScript's text item delimiters to stxt
                    set itxt to text items of itxt
          end if
          set AppleScript's text item delimiters to rtxt
          set otxt to itxt as text
          set AppleScript's text item delimiters to tid
          return otxt
end mungeText
I'm positive there's a better way to check if AirTunes is the active device (maybe by seeing if the current playlist is a device playlist, and checking the source name?), but I don't have any way to test that.

DDE Server Windows: iTunes.exe - Entry Point Not Found

Windows 7 Home Premium
When I start iTunes I get this error. I click OK 4 times and iTunes starts and works OK.
DDE Server Windows: iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I reinstalled iTunes 10.5.3.3 and selected the repair option. Same error.
I reinstalled QuickTime 7.7.1 (1680.42) and selected the repair option. Same error.

Peculiar. I don't think iTunes versions 10.5.x need a QTCF.dll to launch. So something odd is afoot.
Can you check something for me? Do a search of your C drive for QTCF.dll. How many copies do you find, and what is their location?
On a 32-bit system, the standard location is:
C:\Program files\QuickTime\QTSystem\
On a 64-bit system, the standard location is:
C:\Program files (x86)\QuickTime\QTSystem\

DDE Server Windows; iTunes.exe 0x089c1040 such memory cannot be "written"

downloaded and executed iTunes,
iTunes Software License Agreement, after "agree".
Error Prompt appear:
DDE Server Windows: iTunes.exe
"0x089c1040" reference internal memory. Such Internal memory cannot be "written"
After "confirm"
error message disappear but nothing happen,
Your advice of what's next will be greatly appreciate.

Hey back!
I found out how to solve it
i just needed to install the new quicktime version xD
now everything is perfect !^^
but thanks to all who read it!
greetings, wajakla123!

DDE Server Window: iTunes - error

Updated iTunes to 10.5.2 and here you go the error window: DDE Server Window: iTunes. Tried to uninstall & install again, the error remains. Can anyone tell me how to deal with this?

Hey back!
I found out how to solve it
i just needed to install the new quicktime version xD
now everything is perfect !^^
but thanks to all who read it!
greetings, wajakla123!

How to solve DDE server window: itunes.exe-bad image on windows vista itunes 10.2.1.1

i got this message DDE server window: itunes.exe-bad image every time when i tried to open itunes, safary, QuickTime Player this happened when I updated itunes.

Which particular file are the messages complaining about, rock? (Precise spelling, please.)

"DDE server window: itunes.exe - corrupt disk " please help!!!

i keep trying to oppen my itunes on my laptop (a dell inspiron with windows 7) and it keeps saying: "DDE server window: itunes.exe - corrupt disk "
also says "the folder "iTunes" is on a locked disk or you do not have write permissions for this folder"
i dont know anything about this kind of stuff i need detailled help please

hi Hung Tang!
hmmm. just to be on the safe side, please try searching for that file again, after having done this:
Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
b clean
uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
love, b

Windows itune 7

Similar Messages

Maybe you are looking for