Windows keeps on asking for my user credentials

Hi.
As per subject, I keep on getting prompted to enter my user credentials whenever I open a mapped drive (which has been mapped before with the same credentials) or when I open the SharePoint site and also when
I check out and edit a document from SharePoint.
This is becoming debilitating.
I have a very lengthy password as per our policy so I'm really despondent to have to enter this password every single time I access SharePoint.
In the past, I only got prompted once during every session. Now, I get prompted multiple times a day. I will be prompted when I access SharePoint and then 10 seconds later, be prompted AGAIN when I check out and edit a document....WHAT?!
I keep on selecting the checkbox "remember credentials" but this is to no avail. I've deleted all the credentials in Credential Manager numerous times and added them manually and then again automatically, all to no avail. I've even tried multiple
entries for example "192.168.1.1" and also "http://192.168.1.1" as well as the FQDN for example "server01". So the same network resource has 3-4 different entries and none work!!
Whenever I enter my credentials and select that checkbox to remember them, I can see in Credential Manager that the respective entries gets updated but what's the point if they are never utilized?
I've also checked the services and changed the Credential Manager to start automatically without delay.
I have appealed for help elsewhere (WindowsForums, SpiceWorks, TechRepublic) but no one seems to have any definitive answers or solutions. I've been having this issue for YEARS now but want to do something about it now as it's becoming debilitating.
Please help!
Setup:
Windows 7, 64bit
Office 2010 (I'm testing Office 2013 as well)
SharePoint 2010
Service Pack 1

Hi,
"Multiple logon prompt issue" can be caused by many factors, please take a look of this blog:
Multiple Logon while open office Document from SharePoint
http://blogs.technet.com/b/steve_chen/archive/2010/06/25/multiple-logon-while-open-office-document-from-sharepoint.aspx
You can bypassing your proxy server for local addresses or adding a team Web site to the list of trusted intranet sites for a test, steps are listed in this link
Troubleshooting: I Keep Getting Prompted for a User Name and Password
http://technet.microsoft.com/en-us/library/cc750194.aspx
Sometimes, when a Intranet site is identified as an Internet site, it will cause Internet Explorer to prompt you for credentials when you access the intranet Web sites that require authentication
Intranet site is identified as an Internet site when you use an FQDN or an IP address
http://support.microsoft.com/kb/303650/en-us
Yolanda Zhu
TechNet Community Support

Similar Messages

  • Just upgraded to iPhone 5 and when i am buying or updating Apps via iTunes i keep getting asked for different user and login details 1) my old mobileme login and then 20 my new iCloud login - how do I get this resolved so that i have just one login and pa

    Just upgraded to iPhone 5 - now when i am asked to upgrade and App it askes me alternatley for my old mobile me acconut details and then the new iCloud user name and password - how do i change deatils to just one login?

    You cannot merge apple id's. remember that before creating any new ones in the future.
    You have two choices. Live with it, or repurchase the apps under the id you intend to keep using.

  • I keep being asked for my pop.mail password for my user address. Can you help please.

    I keep being asked for my pop.mail password and I do not know what is meant. Can you help. I cannot receive or send messages on thunderbird. You say you have sent a reset message to me but it has not come through. I am searching messages on my ipad. I am on the verge of abandoning Thunderbird and continuing to use my ipad and yahoo account. Thank you for your help in advance.

    Thunderbird has nothing to do with administering your email password and is not going to send you anything. I am not even sure where you requested that something be sent to you unless it is for the password to this forum which has nothing to do with your email.
    Your email provider would have a link to reset your password on their email help page.
    I would go to your providers web mail page and see if your username and password work thee. if they do then you might have incorrect server settings causing the password error.

  • Windows shared folder asks for permanently delete

    Hi,
    Any file from windows shared folder asks for permanently delete and after that it is not recoverable... Please help, how to enable recycle bin service?? 

    Hi,
    This is by design the Recycle Bin only stores files deleted from local drives, not from a shared folder. The workaround is to move a folder in C:\users\<user name> to the shared folder.
    For more detailed information, please refer to the thread below:
    Files deleting over the Network /share drive is not going to the recycle bin it permanently delete the file but deleting from local drive is normaly going to recycle Bin !
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/7119aafa-fe55-470c-ae20-568b80c5dcb4/files-deleting-over-the-network-share-drive-is-not-going-to-the-recycle-bin-it-permanently-delete?forum=winservergen
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I have never had to enter a password to access mail. However, recently, I keep being asked for password on my ****** address. Only on my macbook. (which, btw, has a version number the drop down doesn't offer as a choice. I had to putt 9.4)

    I have never had to enter a password to access mail.
    However, recently, I keep being asked for password on my ***** address.
    Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
    When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
    But when I attempt to use that pw I still can't get in.
    I have no trouble accessing that email account on my mac mini. Just on the macbook.
    <Edited by Host>

    Maiko,
    I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
    I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
    Destination illinois.edu.1945806043
    Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
    Destination uic.edu.1139051993
    is for my entire site ... it's my site handle. Whereas this:
    Destination uic.edu.1991288441
    is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

  • My steam keeps on asking for universal access

    My steam keeps on asking for universal access but i gave it access and it keeps on asking for it!!!!!! help me please!!!!

    Run the following from a terminal window before booting steam on OSX.
    sudo sqlite3 /Library/Application\ Support/com.apple.TCC/TCC.db "REPLACE INTO access VALUES('kTCCServiceAccessibility','com.valvesoftware.steam',0,1,1,NULL);"
    This will reset the values in the Overlay settings for Steam to be "Allowed Access" and "Access Requested" then finally resets the application fingerprint (csreq) to null, which is then filled in later. Something in the way the steam binaries interact with OSX with the fingerprint resets messes with some of these fields. If you have the above settings in place, you can boot without being prompted.
    THIS is the actual solution! It works perfectly, in one second and without re-installng anything.
    Thanks!

  • (passwordless ssh) I keep getting asked for password

    I've been trying to set up passwordless ssh to my webhost, but it keeps asking for my user password (please note "password" is to be distinguished from "passphrase").
    I've set up keychain and x11-askpass, and it asks me for my passphrase when I log in after a fresh boot, so no problems there.
    Here is some verbose output (sanitized):
    [username@localmachine ~]$ ssh -vvv [email protected]
    OpenSSH_4.5p1, OpenSSL 0.9.8e 23 Feb 2007
    debug1: Reading configuration data /home/username/.ssh/config
    debug1: Applying options for *
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to ssh.webhost.net [208.48.143.22] port 22.
    debug1: Connection established.
    debug3: Not a RSA1 key file /home/username/.ssh/id_rsa.
    debug2: key_type_from_name: unknown key type '-----BEGIN'
    debug3: key_read: missing keytype
    debug2: key_type_from_name: unknown key type 'Proc-Type:'
    debug3: key_read: missing keytype
    debug2: key_type_from_name: unknown key type 'DEK-Info:'
    debug3: key_read: missing keytype
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug3: key_read: missing whitespace
    debug2: key_type_from_name: unknown key type '-----END'
    debug3: key_read: missing keytype
    debug1: identity file /home/username/.ssh/id_rsa type 1
    debug1: identity file /home/username/.ssh/id_dsa type -1
    debug1: Remote protocol version 1.99, remote software version OpenSSH_4.5
    debug1: match: OpenSSH_4.5 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.5
    debug2: fd 3 setting O_NONBLOCK
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
    debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
    debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: mac_init: found hmac-md5
    debug1: kex: server->client aes128-cbc hmac-md5 none
    debug2: mac_init: found hmac-md5
    debug1: kex: client->server aes128-cbc hmac-md5 none
    debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
    debug2: dh_gen_key: priv key bits set: 130/256
    debug2: bits set: 499/1024
    debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
    debug3: check_host_in_hostfile: filename /home/username/.ssh/known_hosts
    debug3: check_host_in_hostfile: match line 1
    debug3: check_host_in_hostfile: filename /home/username/.ssh/known_hosts
    debug3: check_host_in_hostfile: match line 1
    debug1: Host 'ssh.webhost.net' is known and matches the RSA host key.
    debug1: Found key in /home/username/.ssh/known_hosts:1
    debug2: bits set: 500/1024
    debug1: ssh_rsa_verify: signature correct
    debug2: kex_derive_keys
    debug2: set_newkeys: mode 1
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2_MSG_NEWKEYS received
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug2: key: /home/username/.ssh/id_rsa (0x80989c8)
    debug2: key: /home/username/.ssh/id_dsa ((nil))
    debug1: Authentications that can continue: publickey,password
    debug3: start over, passed a different list publickey,password
    debug3: preferred publickey,keyboard-interactive,password
    debug3: authmethod_lookup publickey
    debug3: remaining preferred: keyboard-interactive,password
    debug3: authmethod_is_enabled publickey
    debug1: Next authentication method: publickey
    debug1: Offering public key: /home/username/.ssh/id_rsa
    debug3: send_pubkey_test
    debug2: we sent a publickey packet, wait for reply
    debug1: Authentications that can continue: publickey,password
    debug1: Trying private key: /home/username/.ssh/id_dsa
    debug3: no such identity: /home/username/.ssh/id_dsa
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup password
    debug3: remaining preferred: ,password
    debug3: authmethod_is_enabled password
    debug1: Next authentication method: password
    [email protected]'s password:
    I've been searching far and wide but I haven't had success. Help please!

    debug3: send_pubkey_test
    debug2: we sent a publickey packet, wait for reply
    debug1: Authentications that can continue: publickey,password
    It looks like it's sending the key just fine, but the server is asking for the next authentication method.  It could be possible that the server doesn't support key-based connections, or that your public key on the server is invalid.

  • Keep getting asked for my password for email.  Says my POP server rejected my password.  How do I fix this?

    I keep getting asked for my password for email.  Says my POP server "pop.charter.net" rejected the password.  In the past I just went into my email and it came up automatically.

    In Keychain, in the Keychain window, select "login". In the category window, select passwords.
    In the name field, look for name of your outgoing server for that account (like smtp.mail.yahoo.com, outbound.att.net, or whatever outgoing server you have).
    Just highlight it and delete it. Delete any and all for that account.
    You also may want to check and make sure all your outgoing server settings are correct in Mail preferences. If any info is incorrect, it will not work. Sometimes providers change servers and you don't know about it. You may want to check that if the Keychain fix doesn't work.

  • Inactivity timeout for TestStand user credentials

    Hello all,
    I'm curious if anyone has done any work on inactivity timeouts for TestStand user credentials; I am looking for some solution that will allow windows to lock, but if i have a test running and I walk away, my credentials will lock after the test has finished.  Anyone have any ideas on where I can start some research into this?
    -Bill
    John 3:16

    Hi Bill,
    In order to programmatically log out of TestStand, you first have to programmatically shut down the TestStand Engine. To execute the FrontEnd Callback to log out of TestStand, you will have to create a Property Object to pass to the LoginLogout Callback.
    Locals.PropObj = RunState.Engine.NewPropertyObject(PropValType_Container,False,"",0),
    Locals.PropObj.AsPropertyObject.SetValBoolean ("logoutOnly", PropOption_InsertIfMissing, True),
    Locals.PropObj.AsPropertyObject.SetValBoolean ("isInitialLogin", PropOption_InsertIfMissing, False),
    RunState.Engine.CallFrontEndCallbackEx("LoginLogout",Locals.PropObj.AsPropertyObject,ConflictHandler_Prompt,0)
    You will also have to develop a code module to poll for UI messages after calling the first Shutdown sequence.
    Are you intending to run a test, walk away, and come back hours later to a completed test and TestStand idle? Or are you wanting to abort an abandoned test and reset to the initial login screen? This is going to be a fairly complex implementation, so I'm trying to make sure of your intentions.
    Regards,
    Alexandra
    National Instruments
    Applications Engineer

  • I just bought a new Ipad mini a while ago, a created a new apple ID "***************" , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?

    I just bought a new Ipad mini a while ago, and created a new apple ID *********** , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?
    <Edited by Host>

    Read this:
    iTunes Store: Accepted forms of payment
    It is the same for the app store. You are required to have some sort of payment method in the record.
    Barry

  • HT1420 Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

    Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

    If you've forgetten the details for an Audible.com account, see:
    http://audible.custhelp.com/app/answers/detail/a_id/3270
    Regards.

  • When I try to open the Iphoto it keeps on asking for the software update but when I click on the software update tab, it says that all updates are up to date. I still cant open the Iphoto, what should I do?

    When I try to open the iphoto it keeps on asking for the software update, but when I click on the software update it says that all the software in the computer are up to date. I still cant open the iphoto, what should I do?

    How old is your Mac? If it's very recent you need to update via the App Store
    If you purchased at the App Store you need to update via the App Store
    Otherwise you update via Softare Update
    If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
    If you have renamed iPhoto, the updater won't find it. Change it back.
    Regards
    TD

  • Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Help here >  Mac OS X: Changing or resetting an account password

  • Why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it

    why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it?

    Either a bad memory/storage location that manifests its infrequently or a intermittent hardware problem like a loose connection.

  • T-code of the window where it asks for evaluation path.

    Hi,
    I want the T-code of that window where it asks for evaluation path. I want to generate the report in OM

    Hi,
    If you are creating repoert through HIS tool, you can use OODS T code to declare the Evaluation path.
    Tomesh

Maybe you are looking for

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holdi

  • Query with trim function running more than 15 hours..

    Hi, I have one select query which is running more than 15 hours.I have many trim() functions in that.and i have index for some columns for the tables that i used in that query.but it is not considering those indexes.. select DISTINCT trim(A.x) x, tri

  • MS Office Outlook Import question

    Hey,  I just purchased the new MS OFFice 2013 and i want to install it on my laptop. I already have office 10. How do i Import all the mails from outlook 2010 to my new 2013 Outlook?? Do i need to do something like importing all the files to a new de

  • Pinch to Zoom in on email

    Why would they remove the ability for the page to re wrap the text when zooming in to read email.  It does word wrap text inthe browser, it realigns it when zooming in so you don't scroll back and forth, just up and down.

  • Advanced Lightning Bug?

    Hi guys, Anyone else having this trouble with the Advanced Lightning effect? I understand the Direction property is contextual based on the Lightning type selected, so its name could be 'Direction' or 'Outer Radius' depending on which you select. How