Windows LDAP attributes match for the Synology LDAP client profile filter.

I am having Windows server 2012 domain controller with LDAP enabled. I wish to enable LDAP client on Synology Diskstation to search for users and enable them access of shared folders of Synology. Hence, I have enabled the client which shows connected to the Windows LDAP service, but not populating any users.
Anybody figured out this? It requires profile settings. I'm finding difficult to identify the LDAP attributes match for the Synology profile filter attributes.
Refer following image.
This topic first appeared in the Spiceworks Community

Specify a Dynamic Access Profile with:
Criteria: User has ALL of the following AAA attribute values...
ldap.memberOf != GroupName
cisco.tunnelgroup = TunnelGruopName
Should work
/K

Similar Messages

  • SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content

    I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
    straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
    What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
    the config on the switch is very simple and this shouldn't be the case.
    I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
    I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
    When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
    This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
    Anyone has any clues?
    thanks
     - Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe 
     - Download done setting progress bar to 100
    VerifyContentHash: Hash algorithm is 32780
    c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
    c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
     - Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
     - DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
     - DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
     - Failed to resolve package source "GTK0000C"
     - Exiting ConfigureEx: 0x80091007
     - BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
     - Failed to configure OSD setup hook (0x80091007)
     - Failed to configure OSD setup hook (0x80091007)

    is this the only indication of a problem in your smsts.log file ? did you apply the
    authenticode hotfix or have you
    downloaded the SP1 media after that hotfix was applied ?
    Step by Step Configuration Manager Guides >
    2012 Guides |
    2007 Guides | I'm on Twitter > ncbrady

  • Hash could not be matched for the downloded content. Original ContentHash = , Downloaded ContentHash

    <![LOG[Download done setting progress bar to 100]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="1" thread="2544"
    file="downloadcontent.cpp:1603">
    <![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="1" thread="2544"
    file="downloadcontent.cpp:1726">
    <![LOG[Failed to open file c:\_smstasksequence\packages\cms00007\configmgr2012adminui-rtm-kb2717295-i386.msp with error [32].
    ]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="3" thread="2544" file="securityutil.cpp:478">
    <![LOG[HashFile - exclusive access check for the file failed.]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context=""
    type="3" thread="2544" file="hashdir.cpp:227">
    <![LOG[Failed to hash file, Win32 error = 4103]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="3"
    thread="2544" file="hashdir.cpp:631">
    <![LOG[Hash could not be matched for the downloded content. Original ContentHash = 0617F93A16E48E5E4AE958081967812D78AF06F608A1C39CD9DE85D97003AD01, Downloaded ContentHash = ]LOG]!><time="15:54:30.490-120"
    date="01-21-2013" component="InstallSoftware" context="" type="3" thread="2544" file="downloadcontent.cpp:1771">
    <![LOG[0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2900)]LOG]!><time="15:54:30.490-120" date="01-21-2013"
    component="InstallSoftware" context="" type="0" thread="2544" file="resolvesource.cpp:2900">
    <![LOG[DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword
    ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3007)]LOG]!><time="15:54:30.490-120" date="01-21-2013" component="InstallSoftware" context="" type="0" thread="2544"
    file="resolvesource.cpp:3007">
    i saw this links :
    http://social.technet.microsoft.com/forums/en-US/configmgrosd/thread/909ea31c-7bda-49e2-8b06-ed4fc9c3c48c/
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/4801408b-de60-488c-9d80-7a87134abbaf/
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/4942384c-161c-454f-b8da-bc2a24844602
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/a57bb130-f231-4ced-8ec9-2f645ef9e5f1
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/7146fa83-d00e-4fc1-924b-a829860e506a
    i did not try to do this  Antivirus Scan and Exclusion Recommendations (i relay don't see why i need this if all oder task finshing succesfuly
    http://blogs.technet.com/b/configurationmgr/archive/2010/11/30/configmgr-2007-antivirus-scan-and-exclusion-recommendations.aspx
    i redownload the file from the -kb2717295 and recreate the package , i run this image deployment on all kind of PC they all failed, here is the
    file : configmgr2012adminui-rtm-kb2717295-i386.msp
    i don't know why this file failed, i run this manual it work and this task is also a deployment on collection and it have 100% successes on 8 pc
    i wander what make it failed .

    This is what worked for me. I had to create a brand new package and push it out to the DP's. Then updated my Task Sequence with the new package. It worked perfectly for me. I hope this helps.

  • Problem Instanciating BO - No default attribute defined for the object type

    Hello Experts,
    I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
    Can anybody help, please?

    Hello everyone,
    it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
    I feel deeply sorry for that, Marcos.
    At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
    Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
    Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
    There you'll go.
    Best wishes,
    Florin

  • I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    Hi Jim, thank for the answer. It works thank you very much..
    Kind regards.
    Louis Dijksman
    Op 24 jan. 2015, om 20:55 heeft JimHess <[email protected]> het volgende geschreven:
    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1
    created by JimHess in Photoshop Lightroom - View the full discussion
    I am interpreting that to say that the detail panel is missing your develop module. If that is the case, right-click on one of the other panel headings and make sure there is a checkmark for detail.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7128302#7128302 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7128302#7128302
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • SRIDs do not match for the two geometries

    When execute the program below, it return the error messages: ORA-29877,ORA-13037 and ORA-06512, can anyone tell me what happen and how to fix it, thanks.
    SQL> DECLARE
    2 geo MDSYS.SDO_GEOMETRY;
    3 BEGIN
    4 SELECT A.GEOMETRY INTO geo FROM LINE A WHERE A.ENTITYID = 1734;
    5 UPDATE LINE SET GEOMETRY = geo WHERE ENTITYID = 1733;
    6 END;
    7 /

    Hi,
    Oracle SDO 9i r.2
    I have the same errors.
    Action:
    UPDATE M0100I.TERENURIP t SET t.geoloc.sdo_srid = 262148;
    ERROR at line 1:
    ORA-29877: failed in the execution of the ODCIINDEXUPDATE routine
    ORA-13037: SRIDs do not match for the two geometries
    ORA-13037: SRIDs do not match for the two geometries
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 319
    ORA-06512: at "MDSYS.SDO_IDX", line 16
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 368
    For this table data indexed:
    CREATE INDEX "M0100I"."TERENURIP_SX"
    ON "M0100I"."TERENURIP" ("GEOLOC") INDEXTYPE IS
    MDSYS.SPATIAL_INDEX PARAMETERS (' SDO_INDX_DIMS=2
    LAYER_GTYPE="POINT" SDO_RTR_PCTFREE=2 INITIAL=64K NEXT=8192
    MINEXTENTS=1 MAXEXTENTS=2147483645 PCTINCREASE=0')
    In table user_sdo_geom_metadata for this table: "M0100I"."TERENURIP" SRID = 262148
    sdo_srid of the geometry = null
    Andrey

  • Windows 7 beta driver for the Creative N400

    Hi everyone,
    There is a Windows 7 beta driver for the Creative N400 speakers system.
    Creative Speakers Beta Driver 1.02.000
    Filesize : 24.68 MB
    Release date : 13 Apr 09
    File Name : USPK_W7DRVBETA_US_1_02_000.exe
    This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
    Take note of the following:
    * THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
    * We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
    * Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
    This download supports the following devices only:
    * Creative N400
    Requirements:
    * Microsoft Windows 7 Beta
    Notes:
    * To install this driver
    1. Download the .exe file onto your local hard disk.
    2. Double-click the downloaded file.
    3. Follow the instructions on the screen.

    Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

  • Since upgrading to 10.7.4 my 21.5 inch imac the window is too large for the display. How can I make it fit?

    since upgrading to 10.7.4 my 21.5 inch imac the window is too large for the display. How can I make it fit?

    Some possibilities:
    If you have a Magic Mouse do Control+stroke downwards on the mouse.
    Check System Preferences>Displays is set to the correct resolution
    Check System references>Accesability and make sure Zoom isn't turned on.

  • Please wait for the group policy client - shutting down issues

    Hi
    I have issues with shutting down machines. When machine is connected to company's LAN everything works fine. However, if machine is connected to VPN - Juniper NC - 1 hour or more it always hangs when it is shutting down. When I shut down the machine
    (verbose mode on), first stage is:
    Please wait for the system Event Notification service. 
    This ends exactly
    after 3 minutes. Next stage:
    Please wait for the group policy client windows 7
    ...is never timed out (even after few hours). Machine never shuts down.
    In Application logs there are always these 4 events when machine is unsuccessfully shutting down:
    6005: The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
    4627: The COM+ Event System timed out attempting to fire the Logoff method on event class {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} for publisher  and subscriber .  The subscriber failed to respond within 180 seconds.
    The display name of the subscription is "ISensLogon2". The HRESULT was 80010002.
    6006: The winlogon notification subscriber <Sens> took 180 second(s) to handle the notification event (Logoff).
    6005: The winlogon notification subscriber <GPClient> is taking long time to handle the notification event (Logoff).
    Sens is timed out after 3 minutes while there is no 6006 event for GPClient and machine is stuck there for ages (Please wait for the group policy client
    stage). I noticed in System logs that machine always hangs if there is this error
    5783: The session setup to the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not responsive.  The current RPC call from Netlogon on \\machine to \\server has been cancelled.
    I made a group policy log and below you can see part of GPSVC log when machine is unsuccessfully shutting down:
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe58
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
    GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(438.1a04) 21:31:24:327 Waiting for user group policy thread to terminate.
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe10
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
    GPSVC(218.c88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
    GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
    GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xdcc
    GPSVC(218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0x20cc
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xd90
    GPSVC(218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(218.d48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0x525
    GPSVC(218.d48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
    GPSVC(218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
    GPSVC(218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
    GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x2100
    GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x1264
    GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    I tried with signing out from VPN before shutting down machine, I even switched off WiFi but machine still hung. If i tried to get GP results before shutting down machine it takes ages and it is stuck in "Getting the user name" stage.
    Gpupdate /force never updates policy (It stops at Updating Policy...). I tired with installing different hotfixes which did not resolve the issue. I never have any
    issues with logging in, no GP scripts are applied when user is logging off or on, no roaming profiles. The only issue is when machine needs to be shut down.
    I excluded 1 machine from GP and left it on VPN for a few hours, several times. It always shuts down successfully. I applied GP back one by one and the one which is presumably causing an issue is Avecto which adds admin rights when VPN application
    starts (event 100):
    Process started with admin rights added to token.
     Command Line: "C:\Users\User\AppData\Roaming\Juniper Networks\Setup Client\JuniperSetupClient.exe"
     Process Id: 5540
     Parent Process Id: 2252
     Policy: EA-PrivilegeGuardSettings.UK Policy
     Application Group: EA-PrivilegeGuardSettings.Applications Granted Admin Rights
     Reason: <None>
     File Name: c:\users\User\appdata\roaming\juniper networks\setup client\junipersetupclient.exe
     Hash: 27D8463A913A802E555AEEF45717B122249AA993
     Certificate: Juniper Networks, Inc.
     Description: Juniper Setup Client
     Application Type: exe
     Product Name: Juniper Setup Client
     Product Code: <None>
     Upgrade Code: <None>
     Product Version: 8.0.6.48695
    I guess there is a DNS issues when machine is on VPN which leads that GP cannot be applied / updated. Not sure if or why Avecto would have an impact on this. When machine is trying to shut down it still somehow thinks it is connected to DC. What
    I also noticed are several explorer crashes while machine is on VPN.
    Does anyone have same issues? All machines are Dell with Juniper NC (VPN).
    Thanks,

    Hi,
    According to event log, Winlogon process takes a long time to handle logoff event. That's to say winlogon process is waiting for response to logoff.  
    According to your description after, this problem is most probably caused by Avecto. You can try to disable or uninstall it temporarily for test.
    To make further troubleshoot with this problem, you can try to use WPT (Windows Performance Tool) to make troubleshoot.
    http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • After restarting i get a message saying that Windows could not connect to the Group policy client service

    The message i get is the following: 
    Windows could not connect to the Group policy client service. This problem prevents limited users from logging on to the system As and administrative user you can review the system event log for details why the service didn't respond.
    This happens after restarting my laptop. It takes longer than usual and once it has booted up and loaded Windows Vista, I get the message on the right bottom corner as a window popping up.
    I can still use my computer but a lot of my user account settings are not there.
    I fixed it temporarily by rebooting using the option: boot up using my last successful configuration. Bu once I restart again the same thing happens.
    How can i fix it?
    Thanks.

    Hi,
    Please try the solutions on the following threads:
    http://social.answers.microsoft.com/Forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-bfba-7a98e642c009
    http://social.technet.microsoft.com/Forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1
    If the problem continues, please let us know if the computer is in a domain environment.
    Regards,
    Bruce

  • [svn:bz-trunk] 22381: Add some unit tests for the flex.messaging.client. FlexClientManager, including one for the new getFlexClient(String id, boolean createNewIfNotExist) method signature.

    Revision: 22381
    Revision: 22381
    Author:   [email protected]
    Date:     2011-09-02 05:10:41 -0700 (Fri, 02 Sep 2011)
    Log Message:
    Add some unit tests for the flex.messaging.client.FlexClientManager, including one for the new getFlexClient(String id, boolean createNewIfNotExist) method signature.
    Added Paths:
        blazeds/trunk/modules/core/test/src/flex/messaging/client/
        blazeds/trunk/modules/core/test/src/flex/messaging/client/FlexClientManagerTest.java

  • What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

    What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

    What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

  • How to use visual attribute property for the tab canvas

    Hi all,
    i wanted to use set_tab_page_property ,and a visual attribute property for that
    respective tab page .
    but is saying to many declarations to match up . how will i able to do that.
    can any one helip me out ...
    example....
    i wanted to set the page name (just name of the tab page) red color when i query the form under some conditions .
    can anyone help me out in this.
    thanks in advance
    vardhi

    Hi all,
    i wanted to use set_tab_page_property ,and a visual attribute property for that
    respective tab page .
    but is saying to many declarations to match up . how will i able to do that.
    can any one helip me out ...
    example....
    i wanted to set the page name (just name of the tab page) red color when i query the form under some conditions .
    can anyone help me out in this.
    thanks in advance
    vardhi

  • ITunes Match for the iMac - Music Files on an iPod?

    I subscribe to iTunes Match and have an iPod Classic 160GB. Is it possible to use iTunes Match for my entire music library on my iMac & iPhone BUT put the actual song files on my iPod Classic? The problem is my music library is large, won't fit on my iMac Flash hard drive and iTunes Match is perfect. But I can't figure out how to get those songs onto my iPod Classic because iTunes Match is enabled on iTunes.
    I would like to keep my iTunes library on the iMac using Match and have the physical songs be on the iPod Classic.
    I tested this by putting 1 album on the iMac hd. Then syncing the iPod. Then deleting it from iTunes (the cloud icon came back so Match is doing it's thing and I deleted the physical song files). Sync'd again but this time I checked Manually Manage Music & Videos in the iTunes iPod Settings window before hand, thinking that would tell iTunes to not worry that the 1 Who album wasn't physically on my h/d anymore. But it didn't work. It removed the that album from the iPod Classic.
    Is this possible and I don't have the correct settings in iTunes or on the iPod? Or is this a limitation of using iTunes Match?

    Hey thanks, Jim... Actually I do have a back up of my entire library on an external drive. Is the process just dragging the songs and albums from the Finder (from the external drive backup) onto the iPod when I plug it in to iTunes and they copy over? Is it possible to create new or update existing Playlists with this method? But is key is to never sync the iPod with iTunes or do I need to check Manually Manage Music & Videos?
    Or am I looking at this completely wrong. lol

  • Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

    EDIT --
    I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
    Another EDIT
    I also did not say that I  have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
    Original message follows:
    System: CPQ60-615DX
    Windows 7 Home Premium 64bit
    Drive: hp CDDVDW TS-L633N
    In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
    When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation  point on a yellow background).
    The General Tab Device Status box contains"
    A driver (service) for this device has been disabled.  An alternate driver may be providing this functionality. (Code 32)
    The following information is shown for the device:
    hp CDDVDW TS-L633N ATA Device Properties windo
    Driver Tab:
    hp CDDVDW TS-L633N ATA Device
    Driver Provider: Microsoft
    Driver Date:     6/21/2006
    Driver Version:  6.1.7601.17514
    Digtal Signer:   Microsoft Windows
    Driver File Details:
    hp CDDVDW TS-L633N ATA Device
    Driver files: c:\Windows\system32\Drivers\cdrom.sys
    Provider:         Microsoft Corporation
    File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
    Copyright:        Microsoft Corporation. All rights reserved.
    Digital Signer:   Microsoft Windows
    c:\Windows\System32Drivers\PxHlpa64.sys
    Provider:         Sonic Solutions
    File version:     2.03.27a
    Copyright:        Copyright 2003 Sonic Software
    Digital Signer:   Not digitally signed
    It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
    I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
    I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
    I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
    Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
    Any assistance will be greatly appreciated.
    Bob and Simon
    This question was solved.
    View Solution.

    HI nhgfdstr:
    Thank you for your inquiry.  I am pleased to assist  you!!
    I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)"  click here.  For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending  you  a link, to third party site, with a driver for your hp CDDVDW TS-L633N ,  " Hp CDDVDW TS-L633N ATA Device Drivers Download"  click here.
    Happy Holidays!!!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for