Windows live and yahoo messengers not working

Hi,
I have a blackberry 8520 using V5 OS and downloaded the latest service books as well as the latest version of windows live and yahoo messengers. The problem is i try to log onto either of them and its justs tries to login with no success, i am on a pay as you go tarfiff with access to wifi. Anybody got any ideas how i can fix this problem. many thanks in advance.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to find out if, via the plan you are paying for, you even should be expecting these services to function. Many services will not function without an adequate data plan, even via WiFi...but only your carrier can tell you exactly what services you can expect to work with your plan.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

The apps can only be run on an iOS device. They will not run on your PC.

After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

Windows Vista and iTunes does not work

First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
Karsten

iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media?

Net-Weaver 4.0 installed on Windows-7 . and RRMX is not working...

Dear Experts,
We are using Net-Weaver 4.0 , BW 3.5 and Office-2007. But recently we have installed these over WINDOWS 7.
Previously it was working fine with WINDOWS - XP.
And now after installation , when I put RRMX transaction. I am getting error.
Please suggest , What shall I do ?
Thaks,
Utpal

Hi Utpal:
Probably you need to install a Front End Patch (FEP), with an "S" account you can download it from the SAP Marketplace.
What is the error message you get? search for related SAP Notes with details on this issue resolution. For example SAP Note 1533608 recommends installing FEP 400 of BW 3.5 Add-on of GUI 720 to solve issues with RRMX Transaction Code.
To download the file do the following.
1. Open the link https://websmp102.sap-ag.de/support
2. Click on the Tab "Software Downloads"
3. Click on the Section "Support Packages and Patches"
4. From the Menu on the left Click on "Browse our Download Catalog" option.
5. Click on the link "SAP Frontend Components"
6. Click on "BI ADDON FOR SAP GUI"
7. Click on "BW 3.5 ADDON FOR SAP GUI 7.20"
8. Click on "Win32" to display the list of available FEP for download.
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 26, 2011 10:00 AM

Windows 8 and RD gateway not working!

I have Windows server 2008 (not R2) server running RD gateway and now finding that any client that has upgraded to windows 8 can longer connect via the RD Gateway server. We are using domain\username to log in as we have always done with windows 7
RDP client (which just worked). After reading a number of posts where certain "fixes" or "workarounds" have worked sadly none of these appear to apply to our setup.
I have made sure that ignore client certificates is set to ignore and restarted IIS, I have chacked the server logs and there are no failed logon events, in fact the authentication succeeds but the session isn't created.
Running out of ideas now...any help?
drac

Hi,
Thanks for the response, to answer your questions...
a. How did you judge that the authentication succeed, but the RDP session created failed?
There is an entry in the security event log showing a successful authentication request and no failures logon events for the time the user tried to connect
b. Are there any errors/prompted warning message when the issue occurred? If yes, please provide the errors/warnings to us.
There are no errors or warnings at the client side as such, the logon box just reports logon failure username or password incorrect and then re-prompts for UN and PW
c. Do all the Windows 8 clients have the issue or only some of them have the issue? Does the issue also occur on Windows 7 clients?
This happens with all Windows 8 clients or any Windows 7 client that has updated the RDP client to 6.2.9200, all other clients work ok.
d. Please let us know the Windows Server 2008 TS configuration information
Windows server 2008 (not R2), registered on the domain, with licensing server, TS gateway and session host added features. SSL certificate purchased from trusted CA. CAP configured to allow all domain users and RAP configured to allow access to
all resources. Server has been working happily away and still does for the majority of clients.
Hope this helps, let me knew if you need any further information.
Regards
Drac

Window 8 and Adobe does not work on Internet 10

I have Window 8 and running Internet Explorer 10 and when I go to a website that need Adobe to run the program, it tells me that I do not have Shockwave is enabled and ActiveX Filtering is not, and I have ran all the test that is aked on the site to check it out and everything is okay. I am not sure how to get it to work, any ideas? Runnng 10.1.5 Can anyone help me out?

Could you verify that you are using the desktop mode of IE and not the modern version?
http://forums.adobe.com/message/4814662#4814662

WinHelp, Windows 8 and Ultrabook - macros not working

Our products are generated for WinHelp 2000 using RH9 for Word
The user has symptoms typical of macros not working. This has normally been caused by the user not properly doing the step described in the Knowledgebase article at http://support.microsoft.com/kb/917607 regarding " How to enable macros on a single computer after you install the WinHlp32.exe"
I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine. I have also verified that the user's machine has the correct registry settings, so it looks like Windows 8 is not the culprit. That leaves the Ultrabook
This combination of Windows 8 and Ultrabook is quite new and I am hoping someone using WinHelp 2000 has already run into it.
Please let me know if so.
Thanks

David
On rereading this, I am not sure I follow.
You say "I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine."
So on your machine it is OK but not on that of a user who has an Ultrabook, is that the case? If so, I'm not sure how to help as it is machine specific. Are you 100% sure they downloaded the right viewer and installed it with admin rights?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Windows Live Movie Maker will not work

After downloadng Windows Essentials and the WMM I received this error message
Windows cannot access the specified device path or file.
You may not have the approprate permissons to access
the item
Tried downloading again as administrator with no success.

Hi,
I agree with
arnavsharma to run the WMM as administrator to see the results.
Also, I suggest you use Process monitor to capture the events when you repro this issue.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If you find any file or registry key with access denied error, try following guide to fix it:
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved process file into file service like Onedrive and share the link here for our research.
Kate Li
TechNet Community Support

Windows XP and deskjet D4360 not working

I have and old version of Windows XP with no service packs and I cannot get my new deskjet D4360 to work. Has anyone else had this problem and been able to get around it. I have tried downloading the service packs but cannot.
thanks

Have Windows XP Home Edition SP2 and maybe-installed SP3 and Deskjet 1660 - printing ok for a few times then gave up completely - try the Microsoft website for downloads. Perhaps the HP e-mail help service?
Deskjet??? My desk goes faster than it does.

My home sharing between windows 7 and macbook pro not working

My macbook pro is not pulling up my windows 7 home sharing?
The itunes 10.5.1 is my version

Welcome to the Apple Community.
It isn't homesharing that allows iTunes on your PC to see your iPad when connected. You will likely get better answers to your questions in the iTunes for windows community.
https://discussions.apple.com/community/itunes/itunes_for_windows

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

Windows error: iTunes crashes (uninstall and reinstall does not work)

Hello all.
I (and another user) have had a problem with iTunes crashing when trying to open it. Windows just generates the typical vague error message that explains nothing as to what the problem is. Uninstalling and reinstalling did not work, and using the "Repair" option did not work either.
This was the solution. Hope it works for you. Cheers.
C ;o)
Here are the steps, some might be redundant, but still follow them to try and get iTunes to work.
1. *Extremely important* Close the QuickTime launcher in the tray on the right side of your Windows TaskBar (right-click on the blue QuickTime "Q" logo next to where you have the time and date and select "exit".) The QuickTime logo should disappear from the tray.
2. Go to where your iTunes library folder is, copy it and put it elsewhere on yoour hard-drive. This is where you asked your iTunes to point to and keeps the full repository of the files sync'ed to your iPod. If you don't do this, you will have to re-create the full library of all the music and files you have put into iTunes.
3. Unistall iTunes and reboot your PC.
4. Go to c:\Program Files\Quicktime and delete this whole folder.
5. Go to c:\Windows\System 32 and: delete the Quicktime FOLDER there; then (ii) scroll down and delete all other QuickTime related files (there should be 5-10 of them, I didn't count, some will have a name like QuickTMvr whatever).
6. Empty Recycle Bin.
7. Reboot your PC.
8. Go back to Apple Website and download: iTunes, and (ii) QuickTime installation only (without iTunes).
9. Install QuickTime FIRST (use newly downloaded version)! Check it works OK by opening it.
10. Close QuickTime lanucher from tray, as explained above in step 1.
11. Install iTunes (use the newly downloaded version).
12. Open iTunes. If it opens fine (clap your hands and say "hurray", and actually I said out loud to my PC, "Please work" and it did - I don't know if this step helped at all. ;o) ), then close iTunes FIRST BEFORE DOING THE NEXT STEP. Go to where the new iTunes (and library) folder is, rename the new iTunes folder (as you might notice when/if you open iTunes, that it is all blank), and copy the old iTunes folder (from step 2) to the same location. Re-open iTunes. It should be the way it opened the last time.

Btw.
Don't forget that, from my experience, most iTunes errors comes from malfunctioning instances of QuickTime.

Windows live and yahoo messengers not working

Similar Messages

Maybe you are looking for