WINDOWS MANAGEMENT FRAMEWORK 4.0 - A required certificate is not within its validity period

Hello,
I can't figure out if this is because the Root Certificates were updated in April 2014 then apparently expired by Microsoft or if the PowerShell installer signed this file with a bad software release signature??
We were deploying PowerShell 4.0 (Windows6.1-KB2819745-x64-MultiPkg.msu) with ConfigMgr 2012 with a dependency of .NET Framework 4.5.1. Everything was working fine until sometime around April 24 (exact date unknown). Now any
Win 7 SP1 machines I try to update will not install WMF 4.0. They installed .NET 4.5.1 without any trouble..
The digital signature on it it states it was signed Sept 27 2013 and the certificate expires 4/24/2014.
Even if we change the system clock to April 1 2014 it still will not install.. but this shouldn't matter anyway. They just can't sign new software with that certificate.. surely I can install it..
As for a log... If I run as C:\Windows\ccmcache\3>wusa.exe Windows6.1-KB2819745-x64-MultiPkg.msu /log:c:\windows\ccmcache\3\broken.txt
In the broken.txt I see:
Install Worker.01194: Operation Result Code of the installation: 0X4 HRESULT of the installation: 0X80240022 Operation
Result Code of the update:0X4 HRESULT of the update: 0X800b0101
Install Worker.01243: Failed install update Update for Windows (KB2819745)
Install Worker.01287: Exit with error code 0X800b0101 (A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.)
WINDOWS MANAGEMENT FRAMEWORK 4.0 FOR MICROSOFT OPERATING SYSTEM PRODUCTS
Windows6.1-KB2819745-x64-MultiPkg.msu
I also see this same event information in Setup event log..
I don’t know what to do here. Anyone else having this problem?

Hi,
Have you ever seen this article?
Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
http://support.microsoft.com/kb/2328240/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Similar Messages

Hyper-v replication Error Hyper-V received a digital certificate that is not valid from the Replica server 'burstingreplica'. Error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp"

Hi,
When trying to initiate hyper-v replication from the main server i'm getting this error in the event logs.
Hyper-V failed to enable replication for virtual machine 'RECADemo': A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. (0x800B0101). (Virtual Machine ID 561591B6-567C-...)--I'm using certificate based auth and cert is installed/recognized on both machines.Please help.Thanks,Jaffer
Jaf

Hi,
This error occurs because the Microsoft Certificate Trust List Publisher certificate expired. A copy of the CTL with an expired signing certificate exists in the CryptnetUrlCache
folder. Please try to renew the Trust List Publisher certificate.
The related KB:
Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
http://support.microsoft.com/kb/2328240
How to Renew the Site Server Signing Certificate (Microsoft Certificate Services)
http://blogs.technet.com/b/configmgrteam/archive/2009/02/11/how-to-renew-the-site-server-signing-certificate-microsoft-certificate-services.aspx
Manage Trusted Publishers
http://technet.microsoft.com/en-us/library/cc733026.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Management Framework 3.0 does not install on Windows 2008R2 SP1 Server

I have tried to Install the below update on my Windows 2008R2 SP1 Server and I get error as illustrated
http://www.microsoft.com/en-us/download/details.aspx?id=34595
64-bit versions: Windows6.1-KB2506143-x64.msu
Below is the Error Message I gathered from the Event Viewer
ErrorCode 2149842967
ErrorString
CommandLine "C:\Windows\system32\wusa.exe" "E:\IT\2008R2SP1\Windows6.1-KB2506143-x64.msu"
As per below screenshot, .NET V4 is already installed. Am I missing something?

Sorry I missed it.
Did you go through the 'System Requirements' in the download section ?
If Yes and if your machine has met all pre-requisites and still not able to install WMF 3.0 then you can submit your feedback here:
http://connect.microsoft.com/PowerShell
P.S. found few related questions already asked..hope you have gone through them already before asking the question here :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/56c6ac4e-d7ba-4308-a4de-d4ca45325e65/windows-management-framework-30-install-showing-as-not-applicable?forum=winservermanager
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c85adc4e-d3ad-460a-8e2e-7c6b1e32e7d7/windows-management-framework-30-installation-error?forum=sharepointadmin
Knowledge is Power{Shell}
DexterPOSH
My Blog

How to Install Windows Management Framework 4.0 on Server 2008R2 Core

I am trying to upgrade Server 2008R2 Core to PowerShell 4. I have carried out following steps.
1. Installed .NET Framework 4.5.1 (NDP451-KB2858728-x86-x64-AllOS-ENU)
2. Enabled WoW64-ServerCore, WoW64-NetFx2-Support, WoW64-NetFx2, WoW64-PowerShell
3. Installed Windows Management Framework 4.0 (Windows6.1-KB2819745-x64.msu)
WMF installation shows that it was successful ("Windows update "Update for Windows (KB2819745)" was successfully installed.")
However when I restart the server following shows up on the event log ("Package KB2819745 failed to be changed to the Installed state. Status: 0xd00000bb.")
This same process work on Server 2008R2 full version.
Has anyone seen this before?

Hi Aka Nugawela,
The .NET Framework 4.5 and its point release is supported in the Server Core Role with 2008R2 SP1 or later, could you try to install SP1 then try again.
The related KB:
.NET Framework System Requirements
https://msdn.microsoft.com/en-us/library/8z6watww(v=vs.110).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to install Windows Management Framework 4 manually in Windows 7 SP1

Hi There,
I am trying to install Windows Management Framework 4.0 in Windows 7 SP1 (x64). I have already installed .Net Framework 4.5. When I double click on the installer file "Windows6.1-KB2819745-x64-MultiPkg.msu", it does not install & throws the
below error message.
"Some updates were not installed. The following updates were not installed: Update for Windows (KB2819745)".
Can some one help me with this issue?
Thanks
souravdgupta
Born to Learn

Hello,
is you system clock set to right time
If so can you check what happens if you remove the check box from your Internet Security settings during the installation
Don't forget to put it back on after you install.
If the installation still fails right click the package and select "properties" check "digital signatures" and there details, view certificate. Does it say "This certificate is OK." If you get error there It also might bee that
you need to update your Root certificates: check out this links:
http://support.microsoft.com/kb/931125/en-us

Collection query for computers with windows management framework 3.0

Hi,
collection query for computers with windows management framework 3.0, but I cant found a way. I cant see that it is in the inventory data for SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName.
So any way to get computers with windows management framework 3.0?
/SaiTech

select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SoftwareProduct on SMS_G_System_SoftwareProduct.ResourceId
= SMS_R_System.ResourceId where SMS_G_System_SoftwareProduct.ProductName like "Windows Management Framework 3.0%"
That won't work because as mentioned, it doesn't appear in ARP.
Torsten's suggestion will work or you can resort to software/hardware inventory using the info at
http://serverfault.com/questions/555100/methods-to-detect-version-of-windows-management-framework
Jason | http://blog.configmgrftw.com

Deploy Windows Management Framework 4.0 with SCCM

Hey guys,
I need to deploy the Windows Management Framework 4.0 using the Application Model in SCCM 2012 R2. I've got all the silent install/uninstall commands figured out, the only place I'm hung up on is the detection method. Anyone know how I could address that?
(i.e. PowerShell, not the .NET Framework)

Here's an article with an almost correct answer: http://blogs.msdn.com/b/powershell/archive/2009/06/25/detection-logic-poweshell-installation.aspx
For v3 and 4, the registry key is slightly different: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\3 instead of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1
Jason | http://blog.configmgrftw.com

Not able to install "Windows Management Framework 5.0" in WIndows 2012 R2

Not able to install "Windows Management Framework 5.0" in WIndows 2012 R2. Mentioned the error.
Log Name:      Setup
Source:        Microsoft-Windows-WUSA
Date:          5/23/2014 2:43:56 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:
User:          CONTOSO\Administrator
Computer:      WIN-UHURDKEB5VG.Contoso.com
Description:
Windows update could not be installed because of error 2149842967 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Administrator\Desktop\Windows8.1-KB2894868-x64.msu" ")
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WUSA" Guid="{09608C12-C1DA-4104-A6FE-B959CF57560A}" />
    <EventID>3</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-23T21:43:56.606070300Z" />
    <EventRecordID>35</EventRecordID>
    <Correlation />
    <Execution ProcessID="2824" ThreadID="800" />
    <Channel>Setup</Channel>
    <Computer>WIN-UHURDKEB5VG.Contoso.com</Computer>
    <Security UserID="S-1-5-21-2470170585-1110060405-3753357643-500" />
</System>
<EventData>
    <Data Name="UpdateTitle">
    </Data>
    <Data Name="ErrorCode">2149842967</Data>
    <Data Name="ErrorString">
    </Data>
    <Data Name="CommandLine">"C:\Windows\system32\wusa.exe" "C:\Users\Administrator\Desktop\Windows8.1-KB2894868-x64.msu" </Data>
</EventData>
</Event>
AliahMurfy

Hi AliahMurfy,
To install WMF 5.0 Preview on server 2012 R2, please make sure the version of .Net Framework on server 2012 r2 is 4.5.
And manually install the package and check if it can work.
And please also note, WFS 5.0 preview seems only can install on en-us windows now, for more detailed information, please check this article:
Unable to Install PowerShell V5 preview on Windows
8.1 X64
I hope this helps.

SSL ERROR : The required certificate was not found

I am using Adobe Javascript this.submitForm to submit FDF. This works fine in Windows. When the same pdf is opened in a Linux environment I get the following error:
SSL ERROR : The required certificate was not found
and am required to run acroread -installCertificate.
This I do and it succeeds but the SSL error persists.
The this.submitForm command is given below:
/this.submitForm({cURL: 'https://some-webpath/FILE.cgi#FDF',bFDF: true,bGet: false});
When reading the documentation for the submitForm I see that the Acrobat Web Capture plug-in should be installed: I notice this is the case in Windows but not in Linux. Where can I get this?

Hi Ben,
The behavior you have noticed with the newly installed certificate files in
[home-folder]/.adobe/Acrobat/[version]/Cert folder
and the
[install-folder]/Adobe/Reader8/Reader/Cert/curl-ca-bundle.crt file is correct. Further, the behavior has not changed between Reader versions 8.x and 9.x
It is possible that the problem may be of the installed certificate not linking up to one of the Root CA-s. An Intermedia-CA certificate may be needed to be installed.
Could you mail me at " sanath at adobe dot com ", if possible, with more information about the problem (the PDF, the certificate in question - the file named like 123456.0 ), so that we at Adobe can work on resolving your problem
Regards
Sandip

During deployment :windows installation cannot continue because a required driver could not be installed

During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
a required driver could not be installed".
Hardware : Gigabyte GA-Q77M-D2H.
I got image from installation Disc.
When the error occors this is the event in the admin-log on server 2008R2
The following WDS Client has encountered Fatal Error:
SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
MAC: 000C29D627F6
IP: 192.168.208.86
ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
Arch: 9
ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
What to do?
Thank you in advance.

Hi,
The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
compatibility issues with a driver.
Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
Regards,
Yolanda
Yolanda
TechNet Community Support

Old/Bad Extension Manager 5.5 on Adobe Exchange- Extension does not contain a valid signature

The Adobe Exchange Download page has an old version of Adobe Extension Manager that fails on Mac OS Mountain Lion and later. Anyone who attempts to download Extension Manager gets this old version, 5.5.0.163.
BAD - http://www.adobe.com/exchange/em_download/em55_download.html
Version 5.5.3 is available from the following link, but Adobe search and download page link to the exchange download, not this link.
http://download.macromedia.com/pub/dw_exchange/extension_manager/mac/AdobeExtensionManager _5_5_3_mul_AdobeUpdate.dmg
Adobe, Please update the link so that we can a little more easily download a version that doesn't show the misleading error "The Extension does not contain a valid signature. The extension will not be installed".

Sorry for that. We listed the old version in that page because the latest 5.5.3 patch can be installed ONLY AFTER you have installed the old version. Actually you can find the product updates at http://www.adobe.com/downloads/updates/. Also you can launch Adobe Application Manager or Creative Cloud app to learn which products are updatable and update them if necessary.

Windows Management Framework 4.0 Not Installing for no apparent reason

I have tried very hard to install WMF 4.0 and get PowerShell 3.0, as well as the latest PowerShell ISE. I'm running Windows 7 64 bit Service Pack 1, I've tried meeting all the requirements in the release notes and the instructions on the download page, but
it still won't work. First, I run the .msu package, and see a screen like this:
And then, after 5 minutes or so, the bar fills up fast and I get this message: The following updates were not installed.
ANd that's it. I'm stil stuck with PowerShell 2.0, and I can't figure out what to do.

try again with this installer
http://www.microsoft.com/en-us/download/details.aspx?id=40855
The OP stated that he's trying to install the MSU which is exactly what you pointed him to, again.

Window Manager delimma! TWM is almost perfect, but not quite :(

Hi,
I guess I should start out by saying I'm pretty new to Linux, so I'm not experienced with all the DEs and WMs out there. I've trief (very briefly) KDE, Xfce, and Openbox, but honestly none of them really got me as excited as TWM. I've spent hours writing my own .twmrc from scratch, and I love it... unfortunately, there seem to be a few critical things things that TWM just won't do. These are listed below in descending order of importance to me:
* task-switching (alt+tabbing): I've been able to do something simple with this using f.forwiconmgr to switch focus, and I like it fine; the only problem is that I can't make it raise the windows, too. I tried a function {f.forwiconmgr f.raise}, but for some reason it would raise the CURRENT window before switching focus to the next.
* maximize (or fullzoom) on double-clicking the titlebar.
* I have one TitleButton which fullzooms on being clicked. For some reason there's an issue where after clicking it, the next click anywhere in TWM's domain will be ignore and changes the cursor to a tiny mouse icon. I have no idea why, and I haven't been able to get around it.
* fullzoom margins: I have my icon manager at the bottom of the screen and an xclock, almost like a taskbar which blends in with the background. I don't like maximized windows blocking them.
* I'd really like to be able to force certain windows to always be in the back. This is mainly because my icon manager and xclock are colored to look like they're part of the background, but I guess if the previous one is satisfied this becomes less important.
* I can't (or haven't figured out how to) make windows raise to the top when you click within them. If I write a line to f.raise when clicking in the window, then TWM consumes the click-signal and it never reaches the window. This is at the bottom because I'm already learning to live with this, and could even see myself starting to appreciate it as a feature before long.
I suppose what I'm asking for is either a solution to these issues with TWM, or suggestions for an alternative WM that will do all of these plus what I like so much about TWM. Of what I've tried, I liked Openbox the most, but having to customize it in xml and its themes kind of turned me off. At the bottom you'll find a link to a screenshot of my current TWM setup, just for some idea if what I'm getting at. I just don't know what to do! I've become very attached to TWM, but also very put off by its flaws.
Thanks!
http://www.bellsouthpwp.net/C/o/Correct … sariss.png

Hello!
I'm trying TWM.
It's rather interesting.
With my .twmrc, I can switch between windows pressing Alt + F3, and then Alt + F11 or F12 to select which window, and then Alt + F9 to raise it, or Alt + F10 to deiconify it.
If several windows are deiconified, I can switch pressing Alt + F1.
I made several keyboard shortcuts to start programms, to handle windows, etc…
With vdesk I have multiple desktops. I set Ctrl + F1-4 to switch to a desktop to anothers.
I made a menu with some programs I use often, but I must add some programs.
I use slim as login manager. I have the slim picture as background. It's good.
I wonder if I won't continue to use twm. It's rather nice, and well made.
Here is the .twmrc I modified:
# $XConsortium: system.twmrc,v 1.8 91/04/23 21:10:58 gildea Exp $
# A little $HOME/.twmrc by Thomas Eriksson [email protected]
# Modified (just colors and some menu options) by Istvan Keppler [email protected]
# twm... the original and the best...
NoGrabServer
#NoDefaults
RestartPreviousState
DecorateTransients
TitleFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
ResizeFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
MenuFont "-adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*"
IconFont "-adobe-helvetica-bold-r-normal--*-100-*-*-*-*-*-*"
IconManagerFont "-adobe-helvetica-bold-r-normal--*-100-*-*-*"
#ClientBorderWidth 2
BorderWidth 3
ButtonIndent 2
NoHighlight
AutoRelativeResize
#DefaultBackground
FramePadding 0
#ForceIcons
NoRaiseOnMove
OpaqueMove
Zoom 500
# This is for hiding the ugly menubar in windows who dont need em.
NoTitle
# "x11amp" # x11amp, the winamp lookalike, http://x11amp.ml.org.
# "xlogo" # a must have :)
"xosview"
Color
BorderColor "gray85"
DefaultBackground "black"
DefaultForeground "gray85"
TitleBackground "black"
TitleForeground "#4CD49E"
MenuBackground "black"
MenuForeground "gray85"
MenuTitleBackground "gray65"
MenuTitleForeground "black"
IconBackground "black"
IconForeground "white"
IconBorderColor "black"
IconManagerBackground "black"
IconManagerForeground "gray85"
PointerForeground "black"
PointerBackground "white"
# Define some useful functions for motion-based actions.
MoveDelta 1
Function "move-or-lower" { f.move f.deltastop f.lower }
Function "move-or-raise" { f.move f.deltastop f.raise }
Function "move-or-iconify" { f.move f.deltastop f.iconify }
# Set some useful bindings. Sort of uwm-ish, sort of
# simple-button-ish
Button1 = : root : f.menu "prg"
Button2 = : root : f.delete
Button3 = : root : f.menu "window"
Button1 = m : window|icon : f.function "move-or-lower"
Button2 = m : window|icon : f.iconify
Button3 = m : window|icon : f.function "move-or-raise"
Button1 = : title : f.function "move-or-raise"
Button2 = : title : f.raiselower
Button3 = : title : f.iconify
Button1 = : icon : f.function "move-or-iconify"
#Button2 = : icon : f.destroy
Button3 = : icon : f.iconify
Button1 = : iconmgr : f.iconify
Button2 = : iconmgr : f.destroy
Button3 = : iconmgr : f.iconify
"F1" = m : window : f.lower
"F3" = m : all : f.showiconmgr
"F2" = m : all : f.hideiconmgr
"F4" = s : window|icon : f.fullzoom
"F5" = m : window|icon : f.bottomzoom
"F6" = m : window|icon : f.topzoom
"F8" = m : window|icon : f.rightzoom
"F7" = m : window|icon : f.leftzoom
"F9" = m : window|icon : f.raise
"F10" = m : all : f.iconify
"F10" = s : all : f.deiconify
"F11" = m : all : f.downiconmgr
"F12" = m : all : f.upiconmgr
"F4" = m : window|icon : f.delete
"F1" = c : all : f.exec "vdesk 1 &"
"F2" = c : all : f.exec "vdesk 2 &"
"F3" = c : all : f.exec "vdesk 3 &"
"F4" = c : all : f.exec "vdesk 4 &"
"F5" = c : all : f.exec "sakura &"
"F6" = c : all : f.exec "thunar &"
"F7" = c : all : f.exec "icecat &"
"F8" = c : all : f.exec "sylpheed &"
"F9" = c : all : f.exec "gimp &"
"F10" = c : all : f.exec "libreoffice &"
"F11" = c : all : f.exec "scribus &"
"F12" = c : all : f.exec "xclock &"
# This is for the window bar
#LeftTitleButton "/usr/X11/include/bitmaps/checkmark.xbm" = f.delete
#LeftTitleButton "/usr/X11R6/include/X11/bitmaps/xm_noenter16" = f.delete
#RightTitleButton "/usr/X11/include/bitmaps/menu12" = f.resize
IconDirectory "/home/admin/.twm/icons" # Directory for non default icons
RightTitleButton "maximize.xbm"=f.fullzoom
RightTitleButton "close.xbm"=f.delete
# And a menus with the usual things
menu "prg"
"Menu" f.title
#"" f.nop
"Xterm" f.exec "xterm -sl 255 -bg black -fg white -name [email protected] &"
#"Midc" f.exec "xterm -sl 255 -bg black -fg white -e midc -b &"
#"Netscape" f.exec "netscape &"
#"Xosview" f.exec "xosview &"
"" f.nop
"Fichiers" f.menu "fichiers"
"Editeurs" f.menu "editeurs"
"Internet" f.menu "internet"
"Bureautique" f.menu "bureautique"
"Graphisme" f.menu "graphisme"
"Visionneurs" f.menu "visionneurs"
"Musique" f.menu "musique"
"Jeux" f.menu "jeux"
"Utilitaires" f.menu "utilitaires"
"Systeme" f.menu "systeme"
"Eteindre/Redémarrer" f.menu "etredemarrer"
menu "etredemarrer"
"Eteindre/Redémarrer" f.title
"Eteindre" f.exec "gksu xterm halt &"
"Redemarrer" f.exec "gksu xterm reboot &"
menu "fichiers"
"Files" f.title
".twmrc" f.exec "medit .twmrc &"
".xinitrc" f.exec "medit .xinitrc &"
menu "bureautique"
"Bureautique" f.title
"Libre Office" f.exec "libreoffice &"
"scribus" f.exec "scribus &"
"gnumeric" f.exec "gnumeric &"
menu "editeurs"
"Editeurs" f.title
"Mcedit" f.exec "xterm mcedit &"
"nano" f.exec "xterm nano &"
"medit" f.exec "medit &"
menu "systeme"
"Systeme" f.title
"Htop" f.exec "xterm htop &"
"Top" f.exec "xterm -bg black -fg white -e top &"
"gparted" f.exec "gksu gparted &"
"/usr/bin" f.exec "thunar /usr/bin &"
"/etc/rc.conf" f.exec "gksu medit /etc/rc.conf &"
"testdisk" f.exec "gksu xterm photorec &"
"Source /etc/pacman.d/mirrorlist" f.exec "gksu medit /etc/pacman.d/mirrorlist &"
menu "visionneurs"
"Visionneurs" f.title
"epdfview" f.exec "epdfview &"
"geeqie" f.exec "geeqie &"
"mupdf" f.exec "xterm mupdf &"
menu "internet"
"Internet" f.title
"icecat" f.exec "icecat &"
"midori" f.exec "midori &"
"elinks" f.exec "xterm elinks &"
"w3m" f.exec "xterm w3m http://www.scroogle.fr &"
"netrik" f.exec "netrik http://www.scroogle.fr &"
"Lynx" f.exec "xterm -bg black -fg white -e lynx &"
"sylpheed" f.exec "sylpheed &"
"skype" f.exec "skype &"
"icecat" f.exec "icecat &"
"deluge" f.exec "deluge &"
menu "ppp"
"PPP" f.title
"Linkup" f.exec "pppd &"
"Hang up" f.exec "ppp-off &"
menu "graphisme"
"Graphisme" f.title
"inkscape" f.exec "inkscape &"
"Gimp" f.exec "gimp &"
menu "musique"
"Music" f.title
"CdPlayer" f.exec "xterm -bg black -fg white -e cd-console &"
"Mp3Blaster" f.exec "xterm -bg black -fg white -e mp3blaster &"
"RealPlayer" f.exec "/usr/home/keppler/RealPlayer8/realplay &"
"Xmovie" f.exec "xmovie &"
#"X11amp" f.exec "x11amp &"
#"Workman" f.exec "workman &"
"vlc" f.exec "vlc &"
menu "jeux"
"Games" f.title
"Xboard" f.exec "xboard -rv &"
menu "utilitaires"
"Utilitaires" f.title
"Corbeille" f.exec "thunar trash:/// &"
"Thunar" f.exec "thunar &"
"Xcalc" f.exec "xcalc &"
"alsamixer" f.exec "alsamixer &"
"terminal Sakura" f.exec "sakura &"
"calc" f.exec "xterm calc &"
"qalculate" f.exec "qalculate-gtk &"
"truecrypt" f.exec "truecrypt &"
"scrot" f.exec "xterm scrot -d 20 &"
"xarchiver" f.exec "xarchiver &"
"xclock" f.exec "xclock &"
menu "window"
"Menu twm" f.title
"forcer à quitter" f.destroy
"Delete Window" f.delete
"" f.nop
"Maximize" f.fullzoom
"Minimize" f.iconify
#"Resize" f.resize
"Move" f.move
#"Raise" f.raise
#"Lower" f.lower
"" f.nop
"Focus" f.focus
"Unfocus" f.unfocus
"Show Iconmgr" f.showiconmgr
"Hide Iconmgr" f.hideiconmgr
"" f.nop
"Screensaver" f.menu "screensaver"
"Redraw" f.refresh
"Restart" f.restart
"Quit" f.menu "quit"
menu "quit"
"Really Quit?" f.title
"No" f.nop
"Yes" f.quit
menu "screensaver"
"ZZzz..." f.title
"Laser" f.exec "xlock -nolock -mode laser &"
"Qix" f.exec "xlock -nolock -mode qix &"
"Star trek" f.exec "xlock -nolock -mode star &"
"Galaxy" f.exec "xlock -nolock -mode galaxy -wireframe&"
"Pyrotechnical" f.exec "xlock -nolock -mode pyro -wireframe &"
"Swarm" f.exec "xlock -nolock -mode swarm &"
"Linux" f.exec "xlock -nolock -mode flag &"
Icons
"XTerm" "/usr/X11R6/include/X11/bitmaps/Term"
"x11amp" "/usr/include/X11/bitmaps/xfm_au.xbm"
Cursors
Frame "left_ptr"
Title "left_ptr"
Icon "left_ptr"
IconMgr "left_ptr"
Move "fleur"
Resize "fleur"
Menu "hand1"
Button "hand2"
Wait "clock"
Select "dot"
Destroy "pirate"

How to create requirement for BOM, not for its components?

Dear gurus,
I have never worked in PS module before. Now I have the following task:
There is Project, Network and WBS. I inserted material for operation in WBS and exploded the material.
Now the system must create requirement for this material but NOT for components of BOM. How can I configure the system?
P.S. We don't use MRP and we can't change Material Master Data.
Edited by: Azat Fayzullin on Dec 8, 2009 12:44 PM

Have you read SAP help on PS
also check this forum for similar posts
If you have never worked on PS module I am not sure if you will be able to configure the system
please attend some courses in PS from your local SAP academy course names are PLM200, PLM210, PLM220, PLM230, PLM240
for your specific requirements I would recommend PLM200 and PLM220

Windows Deployment Services - Windows 8.1 Deployment Failure (Required Driver could not be Installed)

Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstall

Hi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support

WINDOWS MANAGEMENT FRAMEWORK 4.0 - A required certificate is not within its validity period

Similar Messages

Maybe you are looking for