Windows Management Framework 4.0 Not Installing for no apparent reason

I have tried very hard to install WMF 4.0 and get PowerShell 3.0, as well as the latest PowerShell ISE. I'm running Windows 7 64 bit Service Pack 1, I've tried meeting all the requirements in the release notes and the instructions on the download page, but
it still won't work. First, I run the .msu package, and see a screen like this:
And then, after 5 minutes or so, the bar fills up fast and I get this message: The following updates were not installed.
ANd that's it. I'm stil stuck with PowerShell 2.0, and I can't figure out what to do.

try again with this installer
http://www.microsoft.com/en-us/download/details.aspx?id=40855
The OP stated that he's trying to install the MSU which is exactly what you pointed him to, again.

Similar Messages

PE9 suddenly will not work for no apparent reason

I have been successfuly using Premier Elements 9 for the last month since I bought it. This last Thursday, while trying to find video footage online for an upcoming project, one or several bugs came into my computer and almost killed it, and since its recovery, Adobe Premier Elements 9 has suddenly decided that it is "not compatible" with my computer. Even though I have double and triple checked my computer requirements. I need this program for project, need it very badly in fact, but what the heck is going on with it? My computer has since been debugged, cleaned out, and fixed. I have tried uninstalling and reinstalling multiple times, to the same end: whenever I click to open PE9, it pops up with one of those windows asking "Do you want to allow this program to make the following changes to your computer?", I click yes, and absolutely nothing happens. It doesn't open, and it obviously doesn't make the changes it's talking about. Coincidentally (or not), at the same time, the Photoshop Elements I bought with PE9 has decided that one second after I open it, it will "encounter an error/problem" and be forced to shut down with no explanation as to what the problem was or how to fix it. Photoshop Elements has also been working fine. My computer is 100% fine now after its fiasco, but these programs refuse to work. A little help or assistance would be greatly appreciated. Thanks.

I know you say you've cleaned and debugged your computer -- but if you clicked Yes on a window asking if you'd like to modify your computer, there's a very good chance you've downloaded a virus or, at the very least, some troubling spyware.
Run the maintenance regimen I recommend in my books and in the FAQs to the right of this forum. In most cases, this particular strain can be remedied with Spybot S&D and Advanced System Care (even if your antivirus missed it). But, if not, a good virus scan with your antivirus program or, better, Malware Bytes may get your computer back up and running.
Hopefully. Unless the thing you've downloaded is deadlier than the typical bug. (This is as true for a Mac as it is for Windows PC, by the way. A notorious Mac virus has been bringing down Apple computers left and right lately! And, unfortunately, free maintenance programs, like Spybot and Advanced System Care, don't exist for the Mac -- so you may need to pay to get your machine running again.)
BTW, how much clean, freshly defragmented space is left on your C drive? You'll need at least 30 gigs to keep your computer running well.
Meantime, watch out when looking for videos online! Beware of freebies. And NEVER approve ANY offer to modify your computer unless it's a computer you've intentionally installed.

ITunes is not opening for no apparent reason

My iTunes won't open anymore. I don't know what's wrong. It was working fine yesterday and now it just bounces in the task bar. I tried to update it but an "unexpected error" occurs every time. Similarly, I tried to download it offline and I got the same message. I am afraid to delete iTunes for fear of losing my music. Anyone know what might be going on. Is my best chance to delete it, re-download iTunes, and go ahead and upload all my music again?

This is the itunes store with windows forum. So assuming you're on a windows PC (alhtough your signature says Mac), try doing a repair on itunes. In XP, it's Control Panel > Add/Remove Programs, click on change and then repair.

Not able to install "Windows Management Framework 5.0" in WIndows 2012 R2

Not able to install "Windows Management Framework 5.0" in WIndows 2012 R2. Mentioned the error.
Log Name:      Setup
Source:        Microsoft-Windows-WUSA
Date:          5/23/2014 2:43:56 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:
User:          CONTOSO\Administrator
Computer:      WIN-UHURDKEB5VG.Contoso.com
Description:
Windows update could not be installed because of error 2149842967 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Administrator\Desktop\Windows8.1-KB2894868-x64.msu" ")
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WUSA" Guid="{09608C12-C1DA-4104-A6FE-B959CF57560A}" />
    <EventID>3</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-23T21:43:56.606070300Z" />
    <EventRecordID>35</EventRecordID>
    <Correlation />
    <Execution ProcessID="2824" ThreadID="800" />
    <Channel>Setup</Channel>
    <Computer>WIN-UHURDKEB5VG.Contoso.com</Computer>
    <Security UserID="S-1-5-21-2470170585-1110060405-3753357643-500" />
</System>
<EventData>
    <Data Name="UpdateTitle">
    </Data>
    <Data Name="ErrorCode">2149842967</Data>
    <Data Name="ErrorString">
    </Data>
    <Data Name="CommandLine">"C:\Windows\system32\wusa.exe" "C:\Users\Administrator\Desktop\Windows8.1-KB2894868-x64.msu" </Data>
</EventData>
</Event>
AliahMurfy

Hi AliahMurfy,
To install WMF 5.0 Preview on server 2012 R2, please make sure the version of .Net Framework on server 2012 r2 is 4.5.
And manually install the package and check if it can work.
And please also note, WFS 5.0 preview seems only can install on en-us windows now, for more detailed information, please check this article:
Unable to Install PowerShell V5 preview on Windows
8.1 X64
I hope this helps.

Windows Management Framework 3.0 does not install on Windows 2008R2 SP1 Server

I have tried to Install the below update on my Windows 2008R2 SP1 Server and I get error as illustrated
http://www.microsoft.com/en-us/download/details.aspx?id=34595
64-bit versions: Windows6.1-KB2506143-x64.msu
Below is the Error Message I gathered from the Event Viewer
ErrorCode 2149842967
ErrorString
CommandLine "C:\Windows\system32\wusa.exe" "E:\IT\2008R2SP1\Windows6.1-KB2506143-x64.msu"
As per below screenshot, .NET V4 is already installed. Am I missing something?

Sorry I missed it.
Did you go through the 'System Requirements' in the download section ?
If Yes and if your machine has met all pre-requisites and still not able to install WMF 3.0 then you can submit your feedback here:
http://connect.microsoft.com/PowerShell
P.S. found few related questions already asked..hope you have gone through them already before asking the question here :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/56c6ac4e-d7ba-4308-a4de-d4ca45325e65/windows-management-framework-30-install-showing-as-not-applicable?forum=winservermanager
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c85adc4e-d3ad-460a-8e2e-7c6b1e32e7d7/windows-management-framework-30-installation-error?forum=sharepointadmin
Knowledge is Power{Shell}
DexterPOSH
My Blog

WINDOWS MANAGEMENT FRAMEWORK 4.0 - A required certificate is not within its validity period

Hello,
I can't figure out if this is because the Root Certificates were updated in April 2014 then apparently expired by Microsoft or if the PowerShell installer signed this file with a bad software release signature??
We were deploying PowerShell 4.0 (Windows6.1-KB2819745-x64-MultiPkg.msu) with ConfigMgr 2012 with a dependency of .NET Framework 4.5.1. Everything was working fine until sometime around April 24 (exact date unknown). Now any
Win 7 SP1 machines I try to update will not install WMF 4.0. They installed .NET 4.5.1 without any trouble..
The digital signature on it it states it was signed Sept 27 2013 and the certificate expires 4/24/2014.
Even if we change the system clock to April 1 2014 it still will not install.. but this shouldn't matter anyway. They just can't sign new software with that certificate.. surely I can install it..
As for a log... If I run as C:\Windows\ccmcache\3>wusa.exe Windows6.1-KB2819745-x64-MultiPkg.msu /log:c:\windows\ccmcache\3\broken.txt
In the broken.txt I see:
Install Worker.01194: Operation Result Code of the installation: 0X4 HRESULT of the installation: 0X80240022 Operation
Result Code of the update:0X4 HRESULT of the update: 0X800b0101
Install Worker.01243: Failed install update Update for Windows (KB2819745)
Install Worker.01287: Exit with error code 0X800b0101 (A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.)
WINDOWS MANAGEMENT FRAMEWORK 4.0 FOR MICROSOFT OPERATING SYSTEM PRODUCTS
Windows6.1-KB2819745-x64-MultiPkg.msu
I also see this same event information in Setup event log..
I don’t know what to do here. Anyone else having this problem?

Hi,
Have you ever seen this article?
Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
http://support.microsoft.com/kb/2328240/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Unable to install Windows Management Framework 4 manually in Windows 7 SP1

Hi There,
I am trying to install Windows Management Framework 4.0 in Windows 7 SP1 (x64). I have already installed .Net Framework 4.5. When I double click on the installer file "Windows6.1-KB2819745-x64-MultiPkg.msu", it does not install & throws the
below error message.
"Some updates were not installed. The following updates were not installed: Update for Windows (KB2819745)".
Can some one help me with this issue?
Thanks
souravdgupta
Born to Learn

Hello,
is you system clock set to right time
If so can you check what happens if you remove the check box from your Internet Security settings during the installation
Don't forget to put it back on after you install.
If the installation still fails right click the package and select "properties" check "digital signatures" and there details, view certificate. Does it say "This certificate is OK." If you get error there It also might bee that
you need to update your Root certificates: check out this links:
http://support.microsoft.com/kb/931125/en-us

How to Install Windows Management Framework 4.0 on Server 2008R2 Core

I am trying to upgrade Server 2008R2 Core to PowerShell 4. I have carried out following steps.
1. Installed .NET Framework 4.5.1 (NDP451-KB2858728-x86-x64-AllOS-ENU)
2. Enabled WoW64-ServerCore, WoW64-NetFx2-Support, WoW64-NetFx2, WoW64-PowerShell
3. Installed Windows Management Framework 4.0 (Windows6.1-KB2819745-x64.msu)
WMF installation shows that it was successful ("Windows update "Update for Windows (KB2819745)" was successfully installed.")
However when I restart the server following shows up on the event log ("Package KB2819745 failed to be changed to the Installed state. Status: 0xd00000bb.")
This same process work on Server 2008R2 full version.
Has anyone seen this before?

Hi Aka Nugawela,
The .NET Framework 4.5 and its point release is supported in the Server Core Role with 2008R2 SP1 or later, could you try to install SP1 then try again.
The related KB:
.NET Framework System Requirements
https://msdn.microsoft.com/en-us/library/8z6watww(v=vs.110).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The Windows PowerShell snap-in 'Microsoft.Exchange.Management.PowerShell.Admin' is not installed on this computer

hi all,
i am using Exchange server 2013.
when i run the below code i got the following error.
RunspaceConfiguration rsConfig = RunspaceConfiguration.Create();
PSSnapInException snapInException = null;
PSSnapInInfo info = rsConfig.AddPSSnapIn("Microsoft.Exchange.Management.PowerShell.Admin", out snapInException);
Runspace myRunSpace = RunspaceFactory.CreateRunspace(rsConfig);
myRunSpace.Open();
Pipeline pipeLine = myRunSpace.CreatePipeline();
Command myCommand = new Command("Get-Mailbox -ResultSize Unlimited");
pipeLine.Commands.Add(myCommand);
Collection<PSObject> commandResults = pipeLine.Invoke();
Error :
The Windows PowerShell snap-in 'Microsoft.Exchange.Management.PowerShell.Admin' is not installed on this computer.
when i run the command get-pssnapin
result :
Name : Microsoft.PowerShell.Core
PSVersion : 3.0
Description : This Windows PowerShell snap-in contains cmdlets used to manage components of Windows PowerShell
when i run below command
get-pssnapin -registered
result is:
PS C:\Users\Administrator> get-pssnapin -registered
Name : EnginePSSnapin
PSVersion : 2.0
Description : Register cmdlets for Content Engine
Name : HostControllerPSSnapIn
PSVersion : 2.0
Description : Register cmdlets for Host Controller
Name : InteractionEnginePSSnapIn
PSVersion : 2.0
Description : Register cmdlets for InteractionEngine
Name : JunoPSSnapin
PSVersion : 2.0
Description : Register cmdlets for Juno
Name : Microsoft.Exchange.Management.PowerShell.E2010
PSVersion : 1.0
Description : Admin Tasks for the Exchange Server
Name : Microsoft.Exchange.Management.PowerShell.Setup
PSVersion : 1.0
Description : Setup Tasks for the Exchange Server
Name : Microsoft.Exchange.Management.PowerShell.SnapIn
PSVersion : 1.0
Description : Admin Tasks for the Exchange Server
Name : Microsoft.Exchange.Management.Powershell.Support
PSVersion : 1.0
Description : Support Tasks for the Exchange Server
Name : Microsoft.Forefront.Filtering.Management.PowerShell
PSVersion : 2.0
Description : Microsoft Forefront Filtering PowerShell Interface
Name : SearchCorePSSnapIn
PSVersion : 2.0
Description : Register cmdlets for SearchCore
Name : WDeploySnapin3.0
PSVersion : 2.0
Description : This is a PowerShell snap-in that contains cmdlets for managing Microsoft Web Deployment infrastructure
All powershell commands is installed fine .
but still I am getting error
The Windows PowerShell snap-in 'Microsoft.Exchange.Management.PowerShell.Admin' is not installed on this computer

Hi Olaf Reitz,
After running the command still i am getting same error,
The Windows PowerShell snap-in 'Microsoft.Exchange.Management.PowerShell.SnapIn' is not installed on this computer
please see below my task and i achieved so far.
i need to get list of Users in C# from Exchange Server. for that i created new User [[email protected]]
in Exchange Server , then i give Full Access Permissions to that User to Access all other Mail Boxes.
By giving below command in PowerShell I am getting all Users List .
Get-Mailbox -ResultSize Unlimited
i need the same list In C# code. for that I
tried with below code.
Here i got only particular user [ [email protected]] details , instead of list.
SecureString secureString = new SecureString();
string myPassword = "EIS2014!@#"; string username = "[email protected]";
foreach (char c in myPassword)
secureString.AppendChar(c);
PSCredential ExchangeCredentials = new PSCredential(username, secureString);
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://ExchangeServer.admin.com/powershell ), "http://schemas.microsoft.com/powershell/Microsoft.Exchange , ExchangeCredentials);
Runspace runspace = System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(connectionInfo);
runspace.Open();
string newCommand = "Get-Mailbox | Get-MailboxPermission";
Pipeline cmd = runspace.CreatePipeline(newCommand);
Collection<PSObject> results = cmd.Invoke();
runspace.Close();
so , i changed the code below
RunspaceConfiguration rsConfig = RunspaceConfiguration.Create();
PSSnapInException snapInException = null;
PSSnapInInfo info = rsConfig.AddPSSnapIn("Microsoft.Exchange.Management.PowerShell.SnapIn", out snapInException);
Runspace myRunSpace = RunspaceFactory.CreateRunspace(rsConfig);
myRunSpace.Open();
Pipeline pipeLine = myRunSpace.CreatePipeline();
Command myCommand = new Command("Get-Mailbox -ResultSize Unlimited");
pipeLine.Commands.Add(myCommand);
Collection<PSObject> commandResults = pipeLine.Invoke();
i need Users list In C# , how can i achieve this ?
i am getting list in PowerShell , but i need it in C# code.
Is Visual studio Compiled code be 64 bit for running PowerShell scripts ?

ITUNES 10.6 is not installing for windows 7

ITUNES 10.6 is not installing for windows 7;

Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Collection query for computers with windows management framework 3.0

Hi,
collection query for computers with windows management framework 3.0, but I cant found a way. I cant see that it is in the inventory data for SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName.
So any way to get computers with windows management framework 3.0?
/SaiTech

select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SoftwareProduct on SMS_G_System_SoftwareProduct.ResourceId
= SMS_R_System.ResourceId where SMS_G_System_SoftwareProduct.ProductName like "Windows Management Framework 3.0%"
That won't work because as mentioned, it doesn't appear in ARP.
Torsten's suggestion will work or you can resort to software/hardware inventory using the info at
http://serverfault.com/questions/555100/methods-to-detect-version-of-windows-management-framework
Jason | http://blog.configmgrftw.com

Deploy Windows Management Framework 4.0 with SCCM

Hey guys,
I need to deploy the Windows Management Framework 4.0 using the Application Model in SCCM 2012 R2. I've got all the silent install/uninstall commands figured out, the only place I'm hung up on is the detection method. Anyone know how I could address that?
(i.e. PowerShell, not the .NET Framework)

Here's an article with an almost correct answer: http://blogs.msdn.com/b/powershell/archive/2009/06/25/detection-logic-poweshell-installation.aspx
For v3 and 4, the registry key is slightly different: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\3 instead of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1
Jason | http://blog.configmgrftw.com

Apps installed from disk, but Application Manager shows them as not installed

I have all Creative Suite (Master) apps installed from disk, but Application Manager shows them as not installed. Why?

I find a way that could be firing this issue.
First, I installed Creative Cloud in spanish language, then installed some apps like DW, PS, FW, FL, and some more.
Then, some days ago, I realized that my apps were in spanish language, but I prefer them in english, so I switched the language of CC to english in settings options.
Now, these apps installed in spanish language are marked as "not installed" and I see the option to install them. And applications installed before language change, are fine and tracked for updates.
Maybe the issue is related to language changed, the CC manager can't track the language change.
Hope to find a solution in short time, this could be a major issue for someone.
At this time, I'm re-installing the apps in english, I think they must override the spanish ones.
I'm using MacOS 10.8.4 (Mountain Lion) on MacBook AIR, Core i7 (if that make sense)
Cheers!
Mariano Carrizo

Windows Management Framework 4.0 Not Installing for no apparent reason

Similar Messages

Maybe you are looking for