Windows ME does not have associated Oracle 9i download

I am currently usine Windows millenium and cannot find suitable download for Oracle 9i. Would the 2000/NT version be ok or should I be looking at installing 9i lite or something else? Help most appreciated.

Hi Teri,
Oracle 9i does not have support for Windows ME . U need to install Windows 2000/NT on ur system. I think oracle lite also does not support on Win ME. I had Win ME previously installed on my m/c which i upgraded to Windows XP proff.
Hope this helps..
Rajesh

Similar Messages

  • HT201272 I bought my iPad in Dubai and it does not have FaceTime can I download it

    I bought my iPad in Dubai and it does not have FaceTime can I download it

    You can't, FaceTime is not insallted on iPads sold in the UAE due to restrictions by that country's government - as it's blocked by the device's serial number there is no way to install it, including via iOS updates

  • Windows 8 does not have a USB boot option

    QuestionHow can I boot my Windows 8 laptop from a USB device? I created a recovery disk on a USB thumb drive.
    So far I have:
    Entered into the UEFI (BIOS) and set USB to boot first.
    Disabled secure boot.
    I tried to reboot using the general setup options for startup in the windows settings page. I choose boot from USB through the UEFI, but got an error message that system does not have a USB boot option.
    To confirm I also created a bootable DVD with an ISO burner, but my laptop cannot detect a DVD boot option either.
    I assumed that the firmware of the UEFI for this computer allowed a bootable USB but in practice I cannot seem to get this work.
    AnswerTo assist with not being able to boot from a USB device on a Windows 8 laptop, perform the following:
    Plug in USB bootable device.
    Hold down F12 when restarting and access UEFI menu (option is below drive list). If system is set to fast boot, CLICK HERE for instructions on entering the UEFI.
    Go to UEFI and make USB "1st boot".
    Disable secure boot.
    Go to the "Advance" Tab, select "System".
    Change boot order from UEFI to CSM.
    Save changes and exit (F10).
    Computer will restart and boot from USB drive.
    When finished go back into the UEFI and set defaults then save changes and exit (F10). Windows 8 will reboot normally next reboot.

    Done that, only choices are "Set up Firefox to Sync" & "Pair a Device". No ''UNLINK THIS DEVICE". Your turn.

  • ThinkPad Twist s230u with windows 8 Does not have hyper v

    Just wondering if anyone new if and or why windows 8 on the twist does not come with hyper v.  Does the twist not support it?

    You need Windows 8 Pro 64 bit to get Hyper-V.

  • My Windows PC does not have the Airport Utility, do I have to connect it to my pc first?

    On my PC I do not have the Airport Utility. Where is it?

    It is where all of the Apple downloads are:
    Apple - Support - Downloads
    Choose the right version based on the operating system that the PC is running.

  • My new Mac will not allow the download of CS5, how do i circumvent this issue?  I own th dvd however my Mac Pro does not have a disc drive.

    My new Mac will not allow the download of CS5, how do i circumvent this issue?  I own th dvd however my Mac Pro does not have a disc drive.

    Download from Download CS5 products

  • Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

    Hi,
    While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
    action.  Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

    Hi Nikunj Shah,
    First, I suggest you download
    Microsoft Safety Scanner or
    Malicious Software Removal Tool to run a full scan.
    The error messages here seems to be caused by the corrupted registries, which related with the folder association.
    You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
    How to back up and restore the registry in Windows
    Copy and paste the following commands into Notepad, and save it to a .reg file:
    =================
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Folder]
    "ContentViewModeLayoutPatternForBrowse"="delta"
    "ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
    "ContentViewModeLayoutPatternForSearch"="alpha"
    "ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
    @="Folder"
    "EditFlags"=hex:d2,03,00,00
    "FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
    "NoRecentDocs"=""
    "ThumbnailCutoff"=dword:00000000
    "TileInfo"="prop:System.Title;System.ItemTypeText"
    [HKEY_CLASSES_ROOT\Folder\DefaultIcon]
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
      65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\explore]
    "MultiSelectModel"="Document"
    "ProgrammaticAccessOnly"=""
    "LaunchExplorerFlags"=dword:00000018
    [HKEY_CLASSES_ROOT\Folder\shell\explore\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\open]
    "MultiSelectModel"="Document"
    [HKEY_CLASSES_ROOT\Folder\shell\open\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
      65,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
    "MUIVerb"="@shell32.dll,-8518"
    "MultiSelectModel"="Document"
    "Extended"=""
    "LaunchExplorerFlags"=dword:00000003
    "ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
    "MUIVerb"="@shell32.dll,-8517"
    "MultiSelectModel"="Document"
    "OnlyInBrowserWindow"=""
    "LaunchExplorerFlags"=dword:00000001
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
    @="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
    @="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
    @=""
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
    @="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
    [-HKEY_CLASSES_ROOT\Folder\ShellNew]
    [HKEY_CLASSES_ROOT\Folder\ShellNew]
    "Directory"=""
    "IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
      74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
      00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
      00,00
    "ItemName"="@shell32.dll,-30396"
    "MenuText"="@shell32.dll,-30317"
    "NonLFNFileSpec"="@shell32.dll,-30319"
    [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
    "AllDrives"=""
    "IsFolder"=""
    "NoExtension"=""
    ==================
    Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
    Import option from the File menu, to merge the REG file contents.
    Let me know if you need any further help.
    Best regards
    Michael Shao
    TechNet Community Support

  • ITunes installation error: does not have program associated with it for performing this action

    Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
    Error: does not have program associated with it for performing this action
    We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
    The installation continues. we get to the finish window; click finish.
    Next error: iTunes has been installed incorrectly.
    So, what do we do to get iTunes working?
    Thank you.

    Hi normeagle,
    Welcome to Apple Support Communities.
    You may find this article helpful for troubleshooting your iTunes installation:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Best,
    Jeremy

  • Can't access firefox anymore because "it does not have a program associated with it"

    Suddenly today I was unable to launch firefox as normal. Told that "this file does not have a program associated with it for performing this action" And that I should create an association in the Folder Option control panel. I have not been able to work out how to do this, and wonder where the program (that has obviously been there for the past few years) has disappeared to?? I am still using Windows XP....... could it be something to do with that?

    There are some malware infections that make it hard to run programs (EXE) files. Hopefully you do not have one of those.
    Could you check whether it is a problem with your shortcut by starting Firefox a different way:
    Start menu > Run, type or paste the following and then press the Enter key or click Go:
    firefox.exe

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Keeps telling me my file does not have a program associated with it and go to folder options in the control pane. Where is it located

    When I try to save a file the download window keeps coming up. When I click to open the erro message says "File does not have a program associated with it for performing this function. Create an association in the folder options control panel." Where is this control panel and what kind of association do I make. Usually it was adobe but I don't have that choice

    Try using this link first https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file?esab=a&s=File+does+not+have+a+program+associated+with+it+for+performing+this+function&r=0&as=s
    Also it could be the type of file you are downloading. Like if it was a type of text that your default word processor did not accept it would give you that message.
    Hope this helps,
    Jeremy Eramian

  • This file does not have a program associated with it...

    Ok, I'm not awesome at technological troubleshooting, so if someone could help me, I would be grateful because I'm getting frustrated.
    I'm trying to play a silly little game online and it's telling me I need Shockwave.  I know I have it because I've played this game before (something time-wasting on addictinggames.com) and I found a file called Shockwave 11 in C:\\WINDOWS\system32\Adobe\Shockwave 11 with all sorts of things in it.
    I checked my Add/Remove Programs list and it says I have Adobe Shockwave 11.5 and that it is used rarely.
    Since there seems to be a glitch here that I don't understand, I went to the Download Shockwave page on this site and tried to download the latest version or whatever, if that would work.  The gray progress bar moves across under the "Adobe Shockwave Player is now installing" line and then I get an error popup that says:
    "This file does not have a program associated with it for performing this action.  Create an association in the Folder Options control panel."
    What am I supposed to do?  What does this mean?  What file?  Huh??
    I am running Internet Explorer 7 and have Windows XP.
    I am a total noob and need to be spoken to like a child.  Can anyone please help me? 

    I clicked on your link (thank you - where did you get that?) and installed the Full version, apparently successfully, though during the download there were a couple of components that were troublesome. 
    The error message I got during setup read: "Error opening file for writing: C:\WINDOWS\system32\Adobe\Director\SWDNLD.EXE   Click Abort to stop the installation, Retry to try again, or Ignore the skip this file."  Retry did not work, despite having clicked it 10s of times.  I clicked Ignore, then got the same message again, but about a different file: C:\WINDOWS\system32\Adobe\Director\SwDir.dll   Clicking Retry again did not help move things along, so I ignored this one too.  What does this problem indicate?  Do I need to do something here?
    Those are the only errors encountered during setup.  I declined the Google toolbar.  The dialog box says Successfully Completed; I clicked Close.
    So I go to try to play this game as a test and it says "Installing Shockwave Components" and then I get the same error popup telling me that this file does not have a program associated with it for performing this action and that I need to create an association in the Folder Options control panel!
    What does this mean and how do I do it, since it appears to be critical to getting this thing to work...?

  • Powershell shortcut gives"this file does not have a program associated with it for performing this action"

    Hi,
    We have a server where powershell gives an error. The shortcut or the context menu for start button (replaced cmd in context menu) gives an error saying "this file does not have a program associated with it for performing this action".
    In some events, like going to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools\Windows PowerShell.lnk and opening it results in bupkus. Nothing happens.
    Browsing to C:\Windows\system32\WindowsPowerShell\v1.0\ and running powershell.exe directly or opening cmd.exe and typing powershell <enter> runs powershell as it should.
    What gives?
    This posting is provided "AS IS" with no warranties or guarantees and confers no rights

    Hi,
    I'd probably try asking here:
    https://social.technet.microsoft.com/Forums/en-us/home?forum=winserver8gen&filter=alltypes&sort=lastpostdesc
    This is more of an OS issue than a PowerShell issue, IMHO.
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    You are posting in the "icloud on my mac" forum, but your profile mentions Windows.  If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream.  If using windows, try posting in the iCloud on a PC forum.  You'll get better help there.
    https://discussions.apple.com/community/icloud/icloud_on_my_pc

  • When running setup, I get"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.

    whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?

    I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also

Maybe you are looking for

  • Can I share an iTunes account with multiple devices?

    I had an iPhone 3GS. Just upgraded to an iPhone 5C. I'd like to save the 3GS for our daughter to use as an iPad Touch. I realize that I'll need to wipe the 3GS clean and start over with new apps for her. I have a few questions: Can I use my same iTun

  • How do I change the toolbar menu to show only icons, not icons and descriptive text? Thanks for your help.

    My menu toolbar shows icons with a text to the right of the icon describing it. How do I change the settings so that just the icons show. I'm pretty sure it can be done as I've set my desktop for icons only.

  • How to recreate iPhoto from an external HD back up

    Hi all - I have a clean back up of my iPhoto '06 libraries on my LaCie external HD, which is a good thing, because iPhoto on my MacBook Pro, OS X 10.5.2 was corrupted (I wrote about this previously, I made the mistake of editing one of my folders in

  • How to create a modeless dialog using commandlink

    i want to create a modelessdialog using commandlink. and my code is <%@ page language="java" contentType="text/html; charset=UTF-8" pageEncoding="UTF-8"%> <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%> <%@ taglib uri="http://java.sun.com/

  • Java graph library

    Hi all, I am developing a web application.In one of the jsp pages i need to display a tree with some nodes. Is there any library (preferrably open source) which will take inputs and construct a tree and capable of creating a image file. Hashin