Windows ME Explorer doesn't find MuVo TX

This player probably needs to be formatted (Yep, I unplugged it without clearance. Getting feeble.)
Media Source recognizes it and lets me put some .mp3s on it but after about 00 megs on a 52 player it gives me errors.
I get the icon in the tray to shut it down, which seems to function normally. An attempted DOS format didn't work.
Sometimes I get an error 0 in Windows -- not present or not working properly.
Is there another way to format it's Or is there a way to get Explorer to find it's
Thanks much

Thank you, SSR. That got my player formatted and eliminated the transfer problem.
Windows Explorer still doesn't show the player but Mediasource works properly. I think the Explorer problem is that the computer sees a USB mass storage device category (Explorer doesn't show this either) with the player ( which is the H: dri've) under it (so says device manager). A minor inconvenience and an OS problem rather than MuVo.
Thanks again
rr

Similar Messages

  • HT2953 I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes.  Can someone suggest a fix, please?

    I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes.  Can someone suggest a fix, please?

    Hello b0nvivant,
    Thank you for providing so much information about the iPod issue you are experiencing.  I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

    After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
    Can anyone recommend a solution?

    If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
    My Acrobat version is 11.0.10
    I am running Windows 7 Professional with Service Pack 1
    My Internet Explorer is Version 11.0.9600.17691
    Update Versions 11.0.17 (KB3032359)
    I am running Microsoft Office 2013

  • I deleted firefox because of malware; I want to reload it, windows or explorer blocks it before begins; I tried the forum, but when I click on a link I get spammed: I am using Trend Micro Titatanium, but it doesn't seem to be working, can you help me?

    I deleted firefox because of malware;I want to reload it but windows or explorer blocks it. I tried the forum but when I click on a link I get spammed. Can you help?

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Windows Explorer doesn't display some files until I play or get info for them in iTunes.

    Windows Explorer doesn't display some files until I play or get info for them in iTunes.
    How do I get them to all show up in Explorer without playing them all one by one?

    I think I solved the problem by going to File -> Library -> Organize Library

  • After Udateing to IOS 5 my Windows Explorer doesn't see the photo folder on my iPhone

    I use my iPhone at work to take pictures and upload grab them off the phone folder.  I can charge my phone using the USB connection But I'm not allowed to install iTunes on my work computer and I do not wish to use iCloud at this time. Now that I've upgraded to IOS 5 Windows explorer doesn't see a folder for photots?!  How can I restore the ability to grab photo's off my phone using the Windows explorer?

    I can't see Calendars list (iPad-1)
    ...invitations/download button on the lower right.
    where this buton?
             Lower right.  The downward arrow pointing into the horizontal brackt that looks like
              this on its side:  ]

  • Windows 7 Internet Explorer doesn't open (no error shown)

    With the latest set of updates, around 4-5 days ago, a new problem developed which I haven't seen discussed anywhere.  Internet explorer doesn't load up when I click on it's icon.  The hard disk clunks but no explorer window appears.  No error is displayed.  Very odd.  Very occasionally it does load up, perhaps once a day, but then stops loading again after a few minutes.  Anybody got an idea what's happening?
    Dan
    Windows7 64 bit / office 2007Daniel West
    NHS / Home User
    Dell XPS 710

    Based on my known, a corrupt add-on could cause the problem. I have following suggestion.
    Run IE without Add-ons
    =============================
    1. Click Start, All Programs, Accessories, System Tools, Internet Explorer (No Add-ons).
    2. Visit website in this IE and test the issue. .
    If still cannot be run, please try to run it as administrator.
    Hope it helps.

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • Windows (8.1) could not find back up devices while creating a system image (0x80070003)

    I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error.
    A LaCie 1Tb external harddisk is connected to the PC and formatted as an NTFS drive. The hard disk is visable under Harddisk Management and shows up under Explorer mapped as Drive D:
    Any thoughts?

    Hi,
    As you mentioned, the Drive D is mapped from your external harddrive. How did you connect this hard drive into this computer?
    If it was connected via network, Please choose "On a network location" and locate the harddrive to check the results.
    Kate Li
    TechNet Community Support

  • Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command   S, I get a looping "cannot mount errno = 19" message.

    Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
    Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
    When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
    When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
    When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
    When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
    When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
    When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
    I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

    It's a false report and should be ignored.
    I would not rely on TT as I've already said earlier even before Grant posted similar advice.
    I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
    Drive Partition and Format
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer.  Proceed with reinstalling OS X.
    5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • N82: Nokia Software Update doesn't find the phone

    Hello, I am trying to update the firmware of my Nokia N82, but I get an error message from Nokia Software Updater saying that it doesn't find the phone. I find that strange as Nokia PC Suite indeed finds the phone. The icon on the taskbar says that "AndersMobil is connected".
    I've noticed that if I let Nokia PC Suite run at the same time as Nokia Software Updater, this icon shows that the phone is being connected and disconnected several times while Nokia Software Updater tries to find the phone, something that might indicate that the two programs cannot be run at the same time? I tried to run Nokia Software Update alone, but still the program doesn't find the phone.
    In Windows Hardware Manager (or Units manager, not sure of the english translation) of Windows XP, "Nokia GSM Phone USB Modem" gives the following error message: "The unit is not working as it should as Windows cannot load the necessary drivers for this unit (Code 31)." Under "Portable Devices" in Hardware Manager/(or Units manager?) the error message "This unit cannot start. (Code 10)" appears for the unit "AndersMobil".
    I followed the guidelines on the internet reinstalling Nokia PC Suite and Nokia Software Updater, removing and reinstalling the drivers, but Nokia Software Update still doesn't find the phone, and the same error messages appears in Hardware/Units manager every time.
    What do I do?
    Regards,
    Anders
    By the way, I sent an e-mail to Nokia support about this but they still haven't answered although it's been a long time since.
    Moderator note: translation removed.
    Message Edited by sphere_s on 18-Feb-2008 06:53 AM

    See also my post "N82: Remove memory card and click OK" at /discussions/board/message?board.id=smartphones&me​ssage.id=79797#M79797
    I don't know if that problem might be interconnected with the other in some way or not.
    Kind regards,
    Anders

  • Searching for a term using the Search tab in HTML Help doesn't find all relevant topics.

    I'm using the Search tab in the HTML Help window to search for a few words.  But those words are not being located within the topics.  For example, one of the words for which I am searching is Australian.  I can find the topic that contains that word using the Contents tab.  But the Search tab doesn't find it.  I have even tried copying the word from that topic into the Search box but it is not found.
    Is there a known bug in HTML Help search capabilities?

    Is this a stand alone CHM file or is it merged? If it is merged, does the word appear in the search in the CHM containing the topic is searched? I assume you've checked that your Stop List doesn't contain the word being searched?

  • To run iTunes in 64-bit mooose the "Get Info" command in the File menu, and uncheck the "Open in 32-bit mode" checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it a

    To run iTunes in 64-bit mode, select the iTunes application in the Finder, choose the “Get Info” command in the File menu, and uncheck the “Open in 32-bit mode” checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it again and same message comes up

    Have you disclosed the "General" brick in the "Info" panel? Click the disclosure triangle to the left of "General":
    What is your iTunes version and MacOS X version?
    -- Léónie

  • Question about Windows File Explorer and offline attribute display

    In previous releases of Windows (including Windows 8), Windows File Explorer would display a small "x" icon if the offline file attribute was set.  In Windows 8.1, Windows File Explorer no longer displays the "x" icon if the offline
    file attribute is set.  Is there a reason this behavior was changed?  Is there an option to get the old behavior of displaying the "x" icon?

    Hello Ed Winn,
    What ‘x’ icon do you mean?
    Please share us the screenshots to compare.
    Based on my test, I can’t find the ‘x’ icon in the offline folder both in Windows 7 and Windows 8.1.
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Preview Doesn't Find All Searched Text in PDFs

    I downloaded a PDF copy of my home insurance policy and I had it opened in Preview. The pages are displayed in the side bar. When I type in a search query such as "building" or "personal" or "dwelling" it doesn't find all occurrences if any yet I know there should be plenty of hits.
    I guess I can try Adobe Acrobat.
    Thanks for any advice.
    Kelvin

    I get 4 results when I search for ''<identifier>'' on that web page.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for