Windows media player - how do I install it?

Hi everyone,
I am trying to install the windows media player but I'm having trouble. I download it and try to use the stuffit application to open it up but no luck. I have the application to switch downloads from windows media to quicktime player but I don't like the quicktime player.
So...any suggestions?
Thanks,
Richard

"I download it and try to use the stuffit application to open it up but no luck."
What specifically happens? Do you get an error message? If so, what?
"have the application to switch downloads from windows media to quicktime player but I don't like the quicktime player."
Assuming you're referring to Flip4Mac, that's really your best option as WMP for Mac has been discontinued by Microsoft.

Similar Messages

I have my music library in Windows Media Player, how do I transfer it to Itunes

I have all my music in Windows Media Player,
How do I transfer it to Itunes so I can load it into my IPod
& My ITunes library

I didnt have ITunes on the old computer, I installed it on the new computer, and when you install it asks if you want ITunes to be your default music player, it imported some of the music that I transferred from the old computer, but didn't import all of it? Does that make sense? The music was transferred to new computer using Windows Easy Transfer cable....

Using Windows Media Player How is it done

I am using the IPod Shuffle. My Family has several mp3 player that all use the Windows Media Player to upload the music we want to hear. I would like to do the same with the Shuffle. I do not want to download the iTunes. As of right now my computer see the Shuffle as a mass removble storage device put my windows Media Player dose not see it. How do I go about changing this so that widows media player will see the iPod Shuffle.
Windows XP

the only way i can add music to the shuffle is copy and past. I would like to use an interface. is the only way to do this with itunes? I would like to use WMP. Is this possible?

I use to be able to click on a link in a website to watch a video and it would launch windows media player. I have installed the plugin but it still will not launch

Windows Media player will not launch from a video link within a website. it worked until I installed FF4. I did install the plug in but still nothing it just goes to a black then blank page when you try to launch the video.
Ideas?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Windows Media Player - How clear recent files?

Hello There,
I use Windows Media Player ver 9.0
How can I clear the list of recent played files?
Thanks

Exit WMP
Delete the following file from your User Library area.
User/Library/Preferences/Windows Media Player Prefs
Empty Trash
Start WMP again.
iFelix

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Igoogle is my home page, but when I choose to see the weather forecast I must select my city every time I open mozilla 'cause it won't save it.Plus I have a problem with windows media player, it won't install, error message says internal problem.

I have tried to solve this problem myself, by checking the cookies settings and staff. Everything seems to be ok. But it isn't.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Bug & Conflict w/ Palm Destop 6 & Windows Media Player

I am a long time Palm user but my T2 was not getting much use considering I was already carrying Two cell phones. But I was excited to get an upgrade to a Centro for one of my phones. Now I am dealing with the differences between PalmDesktop4 (PD4) and PD6 on Windows XP SP3.
I found what appears to be a critical bug in the installation of PD6 in that it has some very undesirable interactions with Windows Media Player (WMP) 10 & 11. Let me preface by saying that I am not using WMP or PocketTunes for any syncing or transferring any media to my Centro. My Centro is only used for calendar, contacts, calculators, and Docs2Go.
I have installed PD6 and the PD6 user data to a removable drive for personal privacy on a work computer. The error is that when ever the drive is not mounted and wmplayer.exe is started, Windows searches for the Palm Access Installation package on my removable drive and attempts to start a installation of PD6. Of course it does not find the .msi and the only thing that happens is my computer locks up till I close WMP and then the ACCESS installer goes away. If the removable drive is mounted with the PD6 application directory and the PD6 user data, WMP loads quickly and appears to work fine.
Why is WMP trying to connect to applications or support files in the PD6 application directory?
I can only assume that the new PD6 media tab now is hooked into some windows media services. PD6 must be registered as a client/helper app to windows media and WMP is trying to load or locate the registered resources.
The big problem with this is that my user data path gets over written with PD6 installation defaults in the Windows Registry and I have to manually reset all the PalmDesktop registry data to point PD6 at my really user path on the V: drive.
This should not be installed this way. The association between the two applications appears to be an error in the ACCESS installation package for PD6.
I used Palm.com “Chat” support four or five time for some very basic support in getting my new Centro setup. The Palm.com “Chat” support was great. For this issue they were absolutely useless. One support person affirmed that I should be able to use the removable drive, the next just had me do reinstalls for PD6 (that I had already done) and then told me I would have to use the defaults for C:\Program Files and D:\Documents and Settings\username... They recommended that I use the Palm.com phone support number.
I did this and it had to be one of the worse support calls I have made in a while (case number 1-51474282949). Why is it impossible to get any computer software or hardware company to support the desktop software they putout? I got the same tech support baby talk about “reinstalling the application”, “use the default installation path”, “its not our application” and “you will have to contact Microsoft for support on your operating system”. Ahhhhh!
I was not even able to speak with a “Level 2” tech support person. I demanded that I be connected to a technical person a not just fed the same FAQ crap that I could find on the website. The “Level 2” person would not take my call but just passed the message to the “Level 1” Person that I would have to contact Microsoft.
So I am posting this message here to the Palm fourm in hope that the software engineering team will see this and be able to either patch their software or give me the .reg key to break the association between WMP and PD6. Below I have posted a long list of my Chat support that explains the issues in further technical details, and also details the lack of detailed skilled support available at Palm.com.
Help? Direction?
I have my palm application directory installed to V:\PalmDesktop6App and the user data files installed to V:\jcollyer-files\PalmDataV6_001 This is a removable drive that I install on my work computer. I remove this drive and take it home with me. Doing this allows me the ability to keep my palm data secure but I can still use my computer at work to manage my palm data.
If the V:\ drive is not mounted when I run palm desktop, Palm desktop messes up the "Path" regestry key:
[HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop\Core]
"DesktopPath"="V:\\PalmDesktop6App\\"
"HotSyncPath"="V:\\PalmDesktop6App\\Hotsync.exe"
"Path"="V:\\jcollyer-files\\PalmDataV6_001"
"UserConduitFolder"="C:\\Documents and Settings\\jcollyer\\Application Data\\HotSync\\Conduits"
"PIMVersion"="6.1.0"
"DesktopExe"="Palm.exe"
@=""
"Desktop Language"="ENG"
"INSTALLDIR"="V:\\PalmDesktop6App\\"
"VM_Username"="John Collyer"
When the key gets messed up it defaults to the standard palm desktop path:
"C:\Documents and Settings\jcollyer\My Documents\Palm OS Desktop"
I found this out because every time Windows Media player starts it tries to start Palm Desktop or the Palm Desktop install/remove program. I get a pop up window and progress bar that says “Palm Desktop by Access”. The only way to get rid of this pop up window is to shut down windows media player. So if my V: drive is not mounted just starting windows media player corrupts the user “Path” registry settings. It just so happens our work voicemail uses media player on the computer.
Dan(Sun Oct 19 2008 16:04:52 GMT-0400 (Eastern Daylight Time))>
1. Click on Start.
2. Click on Run.
3. Type "regedit" and click Ok.
4. Then Registry Editor window will open.
5. Double click on HKEY_CURRENT_USER.
6. Then click on +sign beside Software.
7. Now delete all the folders which start with Palm.
8. Also delete the folder called US robotics.
9. Now Double click on HKEY_LOCAL_MACHINE.
10. Then click on +sign beside Software.
11. Now delete all the folders which start with Palm.
LiveAssist Transcript
[Print] Print [Copy] Copy [Email] Email [Close] Close
chat id: 7f2a7664-50e8-40fb-8933-f82278d33b6d
Problem: Palm Deskto & Windows Media Player?
John_Collyer > I have my palm application directory installed to V:\PalmDesktop6App and the user data files installed to V:\jcollyer-files\PalmDataV6_001 This is a removable drive that I install on my work computer. I remove this drive and take it home with me. Doing this allows me the ability to keep my palm data secure but I can still use my computer at work to manage my palm data.
If the V:\ drive is not mounted when I run palm desktop, Palm desktop messes up the "Path" regestry key:
[HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop\Core]
"DesktopPath"="V:\\PalmDesktop6App\\"
"HotSyncPath"="V:\\PalmDesktop6App\\Hotsync.exe"
"Path"="V:\\jcollyer-files\\PalmDataV6_001"
"UserConduitFolder"="C:\\Documents and Settings\\jcollyer\\Application Data\\HotSync\\Conduits"
"PIMVersion"="6.1.0"
"DesktopExe"="Palm.exe"
@=""
"Desktop Language"="ENG"
"INSTALLDIR"="V:\\PalmDesktop6App\\"
"VM_Username"="John Collyer"
Dan > Hello John_Collyer, Thank you for contacting Palm Technical Support. My name is Dan. How may I help you?
John_Collyer > When the key gets messed up it defaults to the standard palm desktop path:
"C:\Documents and Settings\jcollyer\My Documents\Palm OS Desktop"
I found this out because every time Windows Media player starts it tries to start Palm Desktop or the Palm Desktop install/remove program. I get a pop up window and progress bar that says “Palm Desktop by Access”. The only way to get rid of this pop up window is to shut down windows media player. So if my V: drive is not mounted just starting windows media player corrupts the user “Path” registry settings. It just so happens our work voicemail uses media player on the computer. I am using window media player 11.
What the heck is going on? How can I stop Windows Media Player from triggering the palm desktop application? Better yet why does it even try?
It does this when I simply open windows media player, even without a file. Just opening the Windows Media player application by it’s self causes this behavior.
Dan > Please let me go through the information you have provided.
John_Collyer > Ok standing by...
Dan > I understand that you have issue with the Palm Desktop and windows Media player getting messed up .
Dan > Sure I will guide with the issue .
Dan > May I know since when you are facing the issue ?
Dan > Please let me know the Operating System you are using. Is it Windows 95/98/ME/NT/2000/XP/Vista or MAC?
John_Collyer > I had this problem from the first install about two weeks. I use PalmDesktop 4 with my T2 for years on a removable drive never had an issue. PD6 only allows me to set the user path during installation. So I have been having issues with the reg keys getting messed up for a while. I though just creating a .reg file to fix the problems was going to be simple till I found windows media player was trying to autostart palm software???
John_Collyer > Windows XP SP3
John_Collyer > I am a new owner of the Palm Centro not using the T2 with PD6
Dan > Thank you for information .
Dan > I got the issue .
Dan > There are more than one version of the Palm software in the computer .
John_Collyer > No only PD6 now
Dan > That's reason the Drivers in the Registry are messing up and causing the issue .
Dan > Okay .
Dan > Do you have any data in the Palm Desktop ?
John_Collyer > Yes, when the V: drive is mounted everything works great, perfect. Windows Media player even load without a hitch. I would even deal with the .reg fix work around I made to over write the registry. I still don't understand why the application tries to load when it is installed on the V: drive if the v: drive is not present. It has to be the install/uninstall .msi file that runs the Add/Remove programs feature in widows control panel. Why does any of this change the user path?
Dan > I will explain you .
Dan > The reason for change of the path is with the corrupted applications and computer settings .
John_Collyer > Sorry, Why would the .msi file run if Windows Media is started?
Dan > .MSI file is the supporting file for Windows Media player .
Dan > That's reason for executing of .msi file during the windows media player .
Dan > To fix the issue we must perform clean uninstall and reinstall so that you will not have any further issue .
Dan > Let me know if you are comfortable with the clean uninstall and reinstall if the Palm software .
John_Collyer > I've uninstalled PD6 and reinstalled it like 12 times. If the V: drive is missing it really messes up the PD6 software. To keep me from doing this by launching PD6 from the C: drive I installed it to V:. No .exe no launchy. It works fine. What is hooking into windows media player. A .msi is a Microsoft install package, not a media file. We can do a clean install but why would running windows media player start the palm install/uninstall .msi file? I have not heard why?
John_Collyer > All my installs have worked fine. Unless there is a deeper cleaning process you can help me with other than running the remove program, is it worth trying AGAIN?
Dan > Did you perform clean uninstall and reinstall >
John_Collyer > Clean = remove program, reinstall, and sync to a new user folder? Then Yes. Other options?
Dan > No we need top perform few other steps .
John_Collyer > Ok shall I "Remove Program"?
Dan > No please wait .
Dan > First please let me know if you have any data in the Palm Desktop in the computer .
John_Collyer > Yes, but it is also going to be kept in the phone correct? It will survive if we create a new user folder right?
Dan > Yes .
Dan > Please let me know the user name given during the Sync .
John_Collyer > Well then I think it is safe, I have recently hotsynced so the data should be a match?
John_Collyer > John Collyer
Dan > Cool .
Dan > Thank you for information .
Dan > In the computer open My documents -->Palm OS Desktop-->locate folder called CoolyJ .
Dan > In the computer open My documents -->Palm OS Desktop-->locate folder called CoolyJ .
John_Collyer > No user folder there.... It's on the V: drive V:\jcollyer-files\PalmDataV6_001\CollyeJ Yes?
Dan > Please wait .
Dan > Please right click on the Palm Desktop and then click on Properties .
John_Collyer > the .exe in V:\PalmDesktop6App or the shortcut in start menu?
John_Collyer > start menu= V:\PalmDesktop6App\Palm.exe
Dan > You will have the Palm Desktop icon on the computer desktop .
Dan > Okay .
Dan > Thank you for information .
Dan > Please take the back of the Palm Desktop data in the computer .
John_Collyer > Destop target = V:\PalmDesktop6App\Palm.exe tpp
John_Collyer > ??? Please take the back of the Palm Desktop data in the computer
Dan > I mean to tell you that we must save all data of the Palm Desktop in different location .
Dan > I will assist you .
Dan > In the computer open V:drive-->locate Palm folder .
Dan > Open Palm folder and check if you have folder called CoolyJ .
John_Collyer > V:\jcollyer-files\PalmDataV6_001\CollyeJ
John_Collyer > No CoolyJ
Dan > Okay .
Dan > In the computer open Vrive-->Collerfiles-->Copy Palm folder and paste on the computer desktop .
John_Collyer > done
Dan > Okay .
Dan > Do not delete the Pal folder that was copied to computer desktop .
John_Collyer > ok
Dan > First go to Start-->Control Panel-->Add/Remove Programs. There Palm or PalmOne or Palm Desktop will be listed. Click Remove against it.
Let me know once you are done with unistallation process.
John_Collyer > starting
John_Collyer > done, next
Dan > Now in the computer open V:drive-->Collerfiles-->Rename Palm folder to Palmold .
John_Collyer > already there
Dan > Okay .
Dan > Now we need to perform Registry Clean up .
Dan > Please perform the steps provided .
Dan > 1. Click on Start.
2. Click on Run.
3. Type "regedit" and click Ok.
4. Then Registry Editor window will open.
5. Double click on HKEY_CURRENT_USER.
6. Then click on +sign beside Software.
7. Now delete all the folders which start with Palm.
8. Also delete the folder called US robotics.
9. Now Double click on HKEY_LOCAL_MACHINE.
10. Then click on +sign beside Software.
11. Now delete all the folders which start with Palm.
John_Collyer > still working
Dan > Please take your time .
Dan > I will be with you .
John_Collyer > done
Dan > Cool .
Dan > You are pretty fast .
Dan > Now clean uninstall of the Palm software is done .
John_Collyer > I was already deep in the registry look at this all thats how I found the "Path"
John_Collyer > Now we reinstall? Can I still use the V: drive for application files and user data?
Dan > Yes .
Dan > You can use V:drive .
Dan > After you install the Palm software perform Sync and make sure that Sync is success .
Dan > And you will not have sny issue with the Windows media player messing up .
John_Collyer > Ok I will start the PD6 install now
Dan > Please go a head .
Dan > Thank you for all the cooperation and patience in the chat session .,
John_Collyer > working almost done
Dan > Awesome .
Dan > But after installation is complete we need to restart the computer .
Dan > We must restart the computer for necessary changes to take place .
John_Collyer > how do I get back to you in support?
Dan > I assure that you will not have any further issue ,
Dan > However if you do have any further issue .
Dan > Please login with the same user name and email address .
John_Collyer > Palm Support can find me after that?
Dan > Yes .
Dan > I will have Our chat session in Our Data Base .
John_Collyer > Ok then it is time for a restart?
Dan > So that once you re contact us we will check with the required information and pull the chat session already we have done with .
Dan > And proceed with the further steps .
Dan > Please go ahead .
John_Collyer > Till then, good bye...
Dan > Please let me know if I can be of any further help .
Dan > Analyst has closed chat and left the room
Did all this above. Still have Windows Media Player trying to launch the ACCESS .msi installer which creates these processes:
IDriver.exe (x5)
IdriverT.exe (x1)
MSIexec.exe (x3)
I have let windows media player and windows installer run a bit longer and I get a second window titled "windows installer" with the text:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter and alternate path to a folder containing the installation package 'Palm Desktop by ACCESS.msi' in the box below.
[C:\DOCUME~1\jcollyer\LOCALS~1\Temp\_is4\]
this is the default text.
I browsed my way to C:\WINDOWS\Installer and found a new .msi for PD6 called C:\WINDOWS\Installer\45599.msi and renamed it to C:\WINDOWS\Installer\45599_PalmNeedsBetterSoftware_msi
Still have the same issues from above. I thought if the .msi failed to be found then the error might just get passed over. So I do not know where IDriver.exe or other MS Installer applications is getting the values for 'Palm Desktop by ACCESS.msi'?
Again it is very odd that the ACCESS installer it trying to run when windows media player is launched (even with out any media, app only). Please do not tell me to do another "Clean Install" that is just BABY-TALK tech support at this point!!! I need to know why the PalmDesktop ACCESS installer is hooking into Windows Media Player. There is no doubt something odd is going on. As long as the V: drive where my Palm Desktop applications and user data is stored there is no problem. As soon as the V: drive is off line I have all these issues.
I noticed that PalmDesktop now has advanced media tools to "Make Video" in the media tab of Palm Desktop. This is where you can export a .mpg slide show of all you photos from your palm photos.
I would bet you a free year of Verizon's wireless data plan that the new Palm Desktop is registered as some type of client application to windows media service. When windows media player loads it tries to register all the clients and the Palm media client application is not available so some how MS Windows tries to start the PalmDesktop installer to fix the client media application.
Please note that I am not using Pocket Tunes at all, not trying to sync pTunes with Windows media or Rhapsody or any other media junk. Right now I want my palm to just be a extra smart contact and calendar manager, that’s all.
PALM NEEDS TO PATCH THIS. Palm Desktop should call Windows Media when it needs it, not have Palm Desktop registered as a client application to Windows Media by default!
PLEASE TELL ME THERE IS A SIMPLE FAQ FIX FOR ALL NONSENSE???
Post relates to: Centro (Verizon)

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Web page music loads in IE but not Firefox. Have downloaded Windows Media Player Firefox plug in but still nothing. Any other suggestions?

Can't get any sound when I open one webpage in Firefox but sound works in Internet Explorer. sound files are .wmv and mp3 format.
I have Windows Media Player Firefox Plug in installed and set to always activiate. Also have Quicktime & Shockwave activated. Any suggestions. Operating system is Windows 7. Thanks

There are a couple issues here that might be the culprit. One is that the player is hidden using a variety of techniques and Firefox often suppresses hidden content because it can be annoying not to be able to control your experience with media. Another possible issue is that the embed tag doesn't specify a content type. Firefox appears to be guessing anyway, and in my case asking whether to activate the QuickTime plugin, but then nothing plays.
To test what would happen if both of those were addressed, you can run this script using Firefox's Web Console. It grabs the address of the media and creates a new embed that is visible and specifies the content type. Here's how to use it:
Select the following long line of code and copy it:
function reEmbedMpeg(em){var el=document.createElement("embed"); el.setAttribute("type","audio/mpeg"); el.setAttribute("src",em.src); el.setAttribute("style","height:20px;width:200px;position:fixed;right:0;top:0"); document.body.appendChild(el);} reEmbedMpeg(document.querySelector("embed"));
When viewing the problem page, press Ctrl+Shift+k to open the Web Console in the lower part of the tab.
Paste the code next to the caret (>>) on the bottom line and press Enter to run it. A player should appear in the upper left corner, the progress bar should show downloading and then the content should play.
Obviously it's not practical to hack every web page you find, but if this is your site or you would be interesting in contacting the owner, hopefully this post will help in getting this working in Firefox.

Using Windows Media player to view .3gp files

I really need help opening up a .3gp file that was sent from a cell phone. It said that I had to choose a file to open it with, and I chose Windows media player, but I keep getting this message.......Windows Media Player cannot play the file. The Player
might not support the file type or might not support the codec that was used to compress the file.
Can someone please tell me how I can correct this problem. I must see this video right away.
Thanks!

Looking for a way to play 3GP or 3G2 files on your computer? If so,
there are a couple of ways you can do this. First of all, 3GP files are
usually movies that are taken from a mobile phone.
If you want to play these on your computer, you can either install a
codec or download third-party software to play these files. In this
article, I will try to mention all the different ways to play 3GP and
3G2 files.
Method 1 – Install Video Codec
Firstly, if you want to play 3GP files in Windows Media Player, you have to install one of the two following programs:
Haali media splitter
FFFDShow MPEG_4 Video Decoder
However, during the installation, you also have to select a specific configuration in order for it to work properly.
For FFDShow, you need to make sure that AMR is enabled on the Audio
Decoder screen and H263(+) is enabled on the Video Decoder screen.
For the Haali Media Splitter program, just make sure that the Enable MP4 support box is checked.
Method 2 – Convert File
The second way you can play these videos is to simply convert them.
This might be a better way so that you can play these videos on anyone’s
computer or stream them to devices like the XBox, etc.

MDT - Need Help Adding Windows Media Player to Specific Deployments

I'm using MDT in conjunction with WDS to deploy Windows 7 in my organization. I use the MDT Computers database to profile machines. (i.e. select certain applications to be installed to specific machines based on MAC address.) In my reference images I have
removed all the components under Media Features, as most users do not need them. However, some users need Windows Media Player.
In the Computers Database properties, under the Details section, I noticed a property called OSFeatures. I tried setting the value to MediaPlayback,WindowsMediaPlayer and just WindowsMediaPlayer, but Windows Media Player does not get installed. Am I not
entering the value correctly?
My goal is to be able to add Windows Media Player to specific machines.
Thanks in advance

Is the OSFeatures property not able to add WMP? The reason why I want to use it is because when I profile machines that need WMP, I can add the option to have WMP added just for that machine.
If I can't use OSFeatures to install WMP, how can I add it back on a per-machine basis?

Why won't Quicktime 7.4.1 play .wmv files when Windows Media Player will?

I am running OS 10.4.11 on a Power Mac G4 Quicksilver 2002. When I try to play .wmv files, the following message appears: "The movie could not be opened. The file is not a movie file." However, I can play such files using Windows Media Player. I have installed Quicktime 7.4.1. That hasn't helped.

Thanks for the suggestions, but I already had Flip4Mac installed. However, I re-installed it, but I get the same disappointing message when I try to open .wmv files from Flip4Mac's "Quicktime Player." Perian doesn't work either. At http://lifehacker.com/software/quicktime/download-of-the-day-perian-mac-204423.p hp I read the following: Perian is a freeware plug-in designed to enable the playback of almost every popular video codec in Quicktime.
In fact, pretty much the only major codec not supported by Perian is Windows Media Video files (WMV), but previously-mentioned Flip4Mac should take care of your WMV needs.
I'd appreciate additional comments and suggestions.

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this?

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this? Reinstalling the application does not clear the error, so I'm assuming the association is somewhere in Firefox.

Never mind -- I just found it under Tools/Options.../Applications, where I changed the incorrect association of "nlmcp" from Windows Media Player to the correct one, NetLibrary Media Center. Done!

How do I install Windows Media Player on iBook

I have downloaded Windows Media Player to my desktop, but do not know how to find an appropiate progam in which to install it with. I would very much like to satch sports over the internet and Windows media palyer is required for most of my current subscriptions.
Forgive my ignorance, as it is my first day with an iBook or any Mac for that matter. (Really prefer it over my past PC's thus far)
Thanks to all.

Stuffit Expander is required to open the WMP download
any many others you'll encounter while using a Mac.
It's available free from Stuffit.com.
Thanks. Will do.

I installed windows media player addon on firfox and it dosen't work. How do i fix this?

I didn't have windows media player add-on on firefox 4.0.1. Now it asked me to install it, i installed it and it doesn't work. It says i am missing windows media player add-on. So i how do i fix this?

Hi Eskil007,
If you are having issues using Touch ID for purchases, you may find the following article helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Regards,
- Brenden

Windows media player - how do I install it?

Similar Messages

Maybe you are looking for