Windows Media Player problem

I use Windows Media Player as my default player. Starting today, any video (whether from a DVD or already existing on my computer) comes up in a tiny window. The media player screen itself comes up filling the screen as always, but the viewing area is only 3 or 4 inches. Clicking on the buttons in upper right to expand to full screen or the middle button has no effect. Normally, the picture comes up much larger, filling the media player framework completely. I can click the media player control at lower right to expand to full screen, eliminating the media player frame, but I want it to come up like it always has. Can anyone help?

Not really a "Apple SU for Windows" question.
Flip4Mac or VLC or something probably.

Similar Messages

Safari/Windows Media Player problem.

I have a bit of a problem at the moment with viewing video content on some sites - when I click the link/button/whatever this message appears -
"Safari can't display content on this page
Some content on this page requires an Internet plug-in that Safari doesn’t support. The application “Windows Media Player” may be able to display this content. Would you like to try?"
When I do try WMP, it opens ok, tries to play it, then gives me this message-
"The file name, directory name, or volume label syntax is incorrect"

Do you also have Flip4Mac installed?
If not, Microsoft is no longer supporting Windows Media Player for OS X but Flip4Mac will continue to be supported which adds a plugin for Safari and other browsers that should work.
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia

Windows Media Player Problem after upgrading to 8.1

Hello, I upgraded my Yoga 13 from windows 8.0 to Windows 8.1 and now Media player 12 gives me this error message:
"Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."
I had Divx Codecs installed prior to upgrading so I tried uninstalling them which did not work, then I tried reinstalling Media Player which did not work either.
Any ideas??
Solved!
Go to Solution.

This problem is actually caused by the Conexant audio driver. Something about the Windows 8.1 installation screws up the this driver installation. The fix is to reinstall the Conexant audio driver from the Lenovo driver page:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032590

Windows Media player problem after 4.2.2

Since the KitKat update WIndows Media Player won't show my phone so I can't sync my music.there.
Yes I know I could use Media Go - but WMP is a LOT easier to use.
I can get the Z1 through My Computer ok.
My Xperia Z tablet with KitKat works fine with Windows Media Player so why doesn't the Z1? Using same cable / USB 2.0 port
This is annoying me so I hope it's a quick answer.
I've reinstalled the driver in Device Manager.
Much appreciated
Solved!
Go to Solution.

Well I seem to have sorted it using the Z2 driver mentioned in another post.
WIll try this on my daughters laptop / Xperia Z as she has the same problem since the Kitkat update.

Windows Media Player Problems and MacBook Pro

Hi!
I installed the Windows Media Player 9 for Mac on my MacBook Pro, used it a couple times and now it just won't work. I have deleted it and re-installed it several times and the same thing happens. WMP starts to load and then i get an error message saying the application ended abruptly and other apps and OS have not been affected. I then sent the report to Apple by pressing the "Report..." button. So, now i just want to get rid of the program and all its files. I deleted the WMP folder and it's preference files, but when i initially installed the program, the VISE installer said it installed 510 files to my HD. Really?
My 2 questions are:
1- what are all the files I have to delete to totally get this application and all its files off my system? I want a clean uninstall as possible.
2- have i done any potential harm to my MacBook Pro? Any diagnostic checks I should run?
Thanks!
MacBook Pro Mac OS X (10.4.6)

1: Check /Library/Application Support/Microsoft/ and /Library/Internet Plugins/
2: probably not, but using OnyX once in a while is a good idea anyways.
http://versiontracker.com/dyn/moreinfo/macosx/20070

Problem with "play to device" on windows media player

Hello, I'm having a problem with the play to device feature of windows media player. I am trying to use it to play music files to my T.V. It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens. No error messages or freezes either, it's as if i never clicked play. I thought this might be a limitation with the t.v. or my network
(im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs. Therefore, i know this is a problem with windows media
player and not my t.v., network or computer. This is a problem because i don't want to play all my music, just my playlist. Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
is not only time consuming and tedious but takes up space on my hard drive) how do i remove this limitation or otherwise get around it? Thanks!
P.S. Out of curiosity, why does this limitation exist and what causes it?

when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.
Hi,
According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
If so,I think this method is different with "play to" feature.
Also,we haven't found any limitation with Windows media player.
Regards,
Kelvin Xu
TechNet Community Support

If you're having problems updating firmware and have Windows Media Player 11 B

I've seen a number of problems with people updating their firmware with WMP installed and it turns out that's the problem. WMP has a bug in it that will not allow the firmware update to recognize the player. So, here's what to do to roll back to a previous version:
These instructions will only work for Windows XP
You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
. Disconnect any portable music or video devices that might be attached to your computer.
2. Click Start, and then click Control Panel.
3. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
4. Click Windows Media Player , and then click Remove.
If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
5. In each of the two confirmation dialog boxes that appear, click OK.
6. When the rollback process is complete (it might take several minutes), click Restart.
7. Click Start, and then click Control Panel.
8. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
9. Click Windows Media Format Runtime, and then click Remove.
If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
0. In the first confirmation dialog box that appears, click OK.
. In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
2. When the rollback process is complete (it might take several minutes to complete), click Restart.
3. Click Start, and then click Control Panel.
4. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
5. Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
6. Follow the instructions that appear in the Software Update Removal Wizard.
If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
If you are still having problems and all else fails, do a System Restore to before WMP was installed.
*Note: If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support, you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
**You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
More information here:
http://www.microsoft.com/windows/win...ionofthePlayer
Some people have found these instructions to be a solution to the "Player Not Connected" Error when trying to update the firmware. (Your mileage may vary)
Note to Mods: This would make a nice sticky

OK. I've been having this problem and have probably read every post there is on the net concerning it. But it doesn't seem to be only a Media Player problem. I was only running Media Player 0 when it happened to me. I found the solution somewhere, I can't remember where, but it worked for me and it was easy.
Here's what you do:
. Download BOTH ZenXtra_PCFW_LA__20_08.exe and enXtraP4SAudible_PCFW_LB_2_0_03.exe
2. Connect the Zen Xtra to your PC.
3. Run ZenXtra_PCFW_LA__20_08.exe. When the window comes up and says that your device is not connected DON'T do ANYTHING! Just leave it there.
4. Now run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe
5. It told me that I already had this version on my device did I still want to load it's I said yes and it went through the whole upgrade and now it works fine.

Problems with Ipod and Windows Media Player PLEASE HELP

Ok i am not sure if this is the correct forum or not but i am having a problem. I have a Windows computer (Yes a windows computer please dont everyone yell at me) and i have a new ipod 30 gig video. Ok well when i put itunes on it changes all my music on my computer gets changed to AAC format and i cannot play music in windows media player. Ok well that is not my big issue. I make videos for church using windows movie maker and i cannot import music because nothing windows can recognize Itunes format which is AAC. well is there anyway so i can use itunes and still use WIndows Media Player and Windows Movie Maker... Any info will be greatly appreciated. THANKS ALL

I believe Quicktime Pro (which is available for Windoze) is capable of opening any WMP files and then you just export it as iPod format. That is how I get video onto the iPod. The Music and Videos all can be placed onto your iPod through iTunes.
So, if you are creating videos in your program, and want them on your iPod, then that is how you can do it.
Videos on your iPod have nothing to do with the formatting of your music. But, as the earlier post stated, change your prefs in iTunes to import as MP3. But, your videos HAVE to be in MP4 or M4V format to work on the iPod.
Good luck... and I'm a j3susfreak too

Problem with windows media player

hallo, mine is hp pavilion entertainment pc
model:dv5-1110eg
i have a problem regarding windows media player when i use to click on it it is showing an error message like this
Windows Media Player Error Message HelpYou've encountered error message C00D1199 while using Windows Media Player.

Hi,
Just install Codecs. Download here.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problem with Windows media player on MAC

I got a new macbook and installed windows vista. When I wanted to play CDs on windows media player there comes a message"windows media player have aproblem..." and the window closes. I contacted the Microsoft support system and they said that the it is the problem with the mac that the Macbook is not really supporting some of the files and they told me to contact the Apple support and even then they could not solve the problem. I returned the first laptop and got a new Macbook again and even the second macbook has the same problem. Could anmy one tell me why this is happening? If your a Macbook user with windows, did you notice this kind of similar problem? Please do let me know. Thanking you.

If you have the current version of Microsoft Windows Media Player for Mac installed, there is little you can do. The WMPFM is not kept as current as the Windows version (IMO, I think MS hates Apple - and this is intentional).

Problems with Windows Media Player for Mac's

Is it safe to download and opperate Windows media player for Mac's to view video on the web ?
Anybody has experience with it ? What are possible problems that may be encountered ? Thanks for any input or feedback.

"Is it safe to download and opperate Windows media player"
Sure, why not?
You should know that's it's discontinued, and no longer developed by Microsoft, and therefore will never be native to Intel Macs. You should look to the free Flip4Mac QuickTime plugin from flip4mac.com

Problem with Windows Media Player since installing Firefox 4.0

Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

What can I do to get the Windows Media Player to work properly?

Problem with Windows Media Player -- saving, transferring

Operating system: Windows 7 Home Premium
Product: HP Pavilion P6000 Series
Windows Media Player
Copy short videos onto a thumbnail drive from a different computer running Windows 7 with Windows Media Player. Thumbnail drive accepts files, lists and can play back fine on same computer. Take thumbnail drive to different computer also running/using Windows Media Player & Windows 7, and playback only plays back audio -- no picture. What am I doing wrong?

As WMP is not a DVD player, my suggestion would be to tell your clients to never use WMP.All our DVD discs go out with a warning not to allow WMP to be used.
In most computer setups, WMP does not play back video correctly as it does not have an MPEG codec installed, or has navigational problems.
All computers that have a DVD drive fitted, will have a dedicated DVD software player installed, such as Win DVD or Power DVD, so why not use that?

Aspect ratio problem in Windows Media Player for DVD from DVD Studio Pro

So I made a DVD with DVD Studio Pro and it looks good in Apple's DVD Player, on an Insignia DVD player appliance and on Playstation 2. Both the movie and the deleted scene were 16:9 from camera to Final Cut Pro and they show that way in all these players.
But on Windows Media Player for Windows XP, the program thinks the movie is 4:3 and the deleted scene is 16:9. Nero's Showtime has the same exact behavior, but at least you can force aspect ratio on Nero.
Besides being longer, the movie is different from the deleted scene in that the movie was originally out of Final Cut Express on an older Mac and it was encoded big endian. The deleted scene was output from Final Cut Pro and encoded little endian. I didn't think it would make a difference, but I tried outputting the movie from Final Cut Pro on the newer Mac and it did come out little endian. I took that into DVD Studio Pro, got rid of the old VIDEO_TS folder and re-built the project, burnt a new DVD. Then I went back to Windows and...
...the same exact problem. Some of the people I give this DVD to will be using Windows Media Player to view it, which is why I want this to not be an issue at all. What am I overlooking?

Look, everyone here (who each have been creating DVDs for over a decade) is telling you the same story. WMP is buggy. Everyone in the industry knows that. Hardware manufacturers like Dell and HP, know that. Why don't you use the DVD player program that they put on the hard drive? Sure one "Hollywood" title works. Did I mention that WMP is buggy? Test a thousand titles, and I'm certain that you will find some discs have problems on WMP, and WMP alone. (And it isn't my assertion that Hollywood DVDs have issues in WMP, everyone is telling you that.) No one has a solution for this, except to not use WMP. Let me repeat once again, no one has a solution for this except to not use WMP. It is impossible to add any sort of programming to the disc that will detect which player is being used to play the disc and compensate for the problems of that player.
Let me put it this way, if you have a disc that plays fine on Zeus's device, and on Apollo's device, and on Hera's device, and on Hermes' device, and on Artemis' device, but you have problems with Athena's device, then logically, Athena's device has a problem... not the disc. Your own experience has proved this to be true. If you were having problems with every device used, THEN you could rightfully say that there is a problem with the disc.

Problems with songs i downloaded with windows media player!!!!(zen tou

If I try to play songs i downloaded with windows media player My zen touch(20Gb) freezes and won't shut down:angry:. I have downloaded the latest firmware so that can't be the cause of the problem.
Can someone tell me what I can do about that.
btw I don't have problems with songs downloaded with creative's media source
Message Edited by Lt_chill on 07-08-2005 09:24 PM

If you mean you subscribed to iTunes Match, you have to import your music into your iTuens library in order to add it to iTunes Match. iTunes Match (and iCloud) only works with iOS devices and computers. It won't work with your iPod Classic; you'll have to sync that with iTunes in order to add your music.

Windows Media Player problem

Similar Messages

Maybe you are looking for