Windows Media Player won't open

Hey. WMP just wont open, it crashes on launch...
I can't see why it was doing this, it was fine yesterday...
Any ideas?
thanks

Not sure about that James. I tried mine and it worked. To be honest there's a few bugs with WMP and it's sort of a necessary evil. I say sort of because there are alternatives.
You might try downloading the whole thing again and installing it (after trashing the version you have now) or try something I like better which is VLC.
It's a multimedia player that works well and can play a multitude of media files.

Similar Messages

  • Windows Media Player Won't Open for Some Streaming Audio

    I run almost every day, and while my friends think my iPod is playing music, the truth is that I stream and record NPR programming for playback during the runs. I'm hooked, but suddenly when I go to the NPR web pages and click on the "listen" link, nothing happens, or I'm told that I don't have a player installed (I have both WMP and Real Player) installed.
    Any idea why this might be happening? I can play audio from other web sites, but I'm just guessing that the problem isn't on the NPR side, but rather on my side. Any suggestions? Thanks.

    Ditch WMP and try the free Flip4Mac WM QuickTime plugin from flip4mac.com
    Otherwise, post your question on the Microsoft Mac discussion boards:
    http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

  • My iphone is not recognised on either my computer (windows 7) or in the latest itunes that i downloaded. It was recognised for a short time but windows media player asked to open my pictures and i clicked ok. I also started downloading the newest software

    My iphone 3gs is not recognised in either windows 7 or in the latest itunes. It was briefly but then Windows asked me if I wanted to open the camera with Windows media player and I clicked ok. I also tried to download the new software for the phone. Now nothing works. I also downloaded a programme which you supposedly need for iphone with windows 7
    Any help please

    The ONLY program you need for an iPhone on Windows 7 is iTunes. Remove whatever the other program is, then remove and re-install iTunes as diesel vdub recommends.

  • Windows media player - can't open it, can't trash it

    I recently upgraded from 10.3 to 10.4 then to 10.4.11. Everything was good.
    I've installed all the updates etc. No problems.
    The only problem (oh surprise, surprise) is that I cannot open windows media player and when I try to trash its folder it is says repeatedly that components this and that can't be trashed becuse they are 'fixed'.(I think)
    I have flip4mac installed and other apps for playing video and audio. No problems as far as I can see with them.
    How do I uninstall media player - forever and ever - please?
    Thanks anyone
    Gordon

    Hi Gordon!
    This is probably the error message you are seeing.
    "The operation could not be completed because the item 'item_name' is locked."
    If you press the Option key, as you select Empty Trash, it should empty immediately.
    ali b

  • Video Streaming in Windows media player won't play through Airport Extreme

    Hello and thank you for reading my issue.
    I have the current square shaped airport extreme base station. My mother has a Windows XP system on her Toshiba laptop and she takes an online class which has video streaming for the lectures. When we connect to the network wirelessly or with an ethernet cable through the base station, the video will not begin to buffer and won't play from the website. It just states ready and doesn't buffer. However, if we connect the laptop straight to our cable modem without the base station, the videos stream and play perfectly. Anybody know how we can fix this to play through the wireless network? Thanks a lot.
    MacBook Pro 2.33 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM   Mac OS X (10.4.8)  

    I've played with all sorts of software settings and configurations. This is what worked for me, but I'm not sure how it would work for anyone else, or if the issues are even related, but here goes.
    1 - Turn multicast rate to 1 MBPS in the drop down menu found in Airport Utility>Airport icon>Wireless Options Button.
    2 - Turn off multicast in Windows Media Player or Real Player
    3 - Turn on Video Overlay Optimization check box in Real Player.
    These things worked for me, hopefully they will help or give you some ideas for your own situtation.
    Russ

  • Windows Media Player won't play media (way to go MS!)

    Seems a LOT of people are having trouble getting Windows Media player to work, including me.
    When I click a link, such as a song sample link on Amazon, the Media Player window opens, but then doesn't play. Sometimes I get the message "Cannot open the file. Verify that the path and filename are correct and try again."
    I have re-downloaded the file and re-installed the app, and trashed
    the preference files, but still nothing. I have unchecked Multicast, UDP and TCP, in preferences, as someone suggested.
    And why do media players insist on moving the volume control to "max"
    when they open, instead of staying where you set them?! Quicktime does
    the same thing.

    if the media file was created in v10 of media player, then the current Mac client will be unable to read the file.
    (MS in their wisdon decided to make the file format incompatible with v9 for Mac.)
    alas, we have no way of knowing which version created the wmv file.
    You may also have a hosed WMP plugin. Try right clicking the link and downloading the file instead of playing it through your browser.

  • Windows Media Player won't recognize Adobe Flash

    Every time I try to play certain files (SWF files, that used to play in Windows Media Player) this little window pops up informing me that; "To play the selected item, you must install the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe Web site."
    Problem is, I've downloaded Adobe Flash Player..... I even decided to cover all my bases, and got Shockwave as well but every time I try to play, it pops up the same message, and clicking the "Web Help" button takes me to the exact same page where I downloaded Adobe Flash Player from!
    Gonna restart my system, see if that helps it (really feeling like it won't >,>), but if that doesn't work then I'm officially stumped!

    Are you loading a particular website? Where is this file that uses Windows Media Player?
    Since your issue relates to Flash, which is separate from Shockwave, post teh question, with full details of what you have been doing, to the Flash forum at:
    http://forums.adobe.com/community/flashplayer

  • Windows media player fails to open

    I click the video link and the WMP icon opens in the doc but the player doesn't open.
    I went to:
    Home/Library/Preferences/
    But these files aren't there to delete:
    com.microsoft.mediaplayer.plist
    Windows Media Favorites
    Windows Media Player Prefs

    Or you could just get the free Windows Media Components for QuickTime:
    http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx

  • Media Player Won't Open

    >>The Problem: Windows Media Player does not respond when I click on the icon (doesn't open)
    >>Relevant Info:  No disc inserted will run automatically.  I must open "My Computer," select the drive, open the folder, and click "Auto Run."  But, they do work, except for DVDs.
    - I called for technical support (different problem) 12 - 18 months ago (Microsoft, I think?), and after $100, a few hours on the phone, and a blur of windows, check boxes, and
    settings changes, my problem was solved.  Although I did notice this issue soon after that, I'm not satisfied that this is the path to the root cause (I have been known to explore
    and monkey with things I shouldn't).
    >>T/S Attempts: Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  No Help
    Tech site suggestion to delete two specific dll. files (don't remember) No noticeable whatsoever system wide)
                                      -  I think this had something to do with blaming DirectX
    (? been a while)
    - "Fix It" . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . ."Troubleshooter Invalid"
    - I always allow the updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Still need a solution
    - Turned WMP off/rebooted, then turned WMP on/ rebooted (Programs & Features). . . Boooo! 
    - Tried to restore/use backup . . . . . . . "You wanted the newer version, you got it.  Live with it!"
                             -  I paraphrased that last bit.  My wife was the inspiration. For clarity, it said it
                                 couldn't install a version older than the one I have.

    Hi,
    Can you open it by the way below: Go to the folder: C:\Program Files\Windows Media Player, find the wmplayer.exe file and double click on it .
    Did you try to disable Windows Media Player and Windows Media Center in Programs and Feartures, and then you may re-enable it.
    Turn Windows features on or off:
    http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off
    I also would like to suggest you try SFC tool to check the issue.
    Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
    http://support.microsoft.com/kb/929833/en-us
    In addition, your profile may be corrupt. Create a new user account and then log on with it.
    Fix a corrupted user profile
    http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile
    If the issue persists, please check event viewer for the exact error code and cause of the issue. Refer the following Microsoft article to check in Event Viewer.
    What information appears in event logs (Event Viewer)?
    http://Windows.microsoft.com/en-US/Windows7/What-information-appears-in-event-logs-Event-Viewer
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Windows media Player won't work at all

    Hey,
    The Windows media Player plug-in will not work at all in Safari.
    It always says:
    "Cannot open the file. Verify that the path and file name are correct and try again."
    How can I fix this!? I have tried reinstalling it, but it doesn't work...
    Cheers
    James

    Hi bramphetamine!
    Instead of WMP, you can use Flip4Mac.
    ali b

  • HP Pavilion dm4 - Windows 7, 64-bit. Error message: Windows Media Player won't play my DVD

    Here is the actual error message. The video card has an updated driver. I can't figure out how to resolve this -
    Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card.

    Hi,
    First of all, if you've recently installed any virtual drive software ( an exmple of this is Daemon Tools ), temporarily uninstall it, restart the notebook and see if this has corrected the error.
    If the above doesn't apply, try downloading and installing the free KLite codec pack on the following link.
    http://www.filehippo.com/download_klite_codec_pack/
    When the installation has completed, restart the notebook and check again.
    Let me know.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Windows media player crashes on opening

    Hi
    I installed WMP in Snow leopard and ran a wmv file and it ran fine.Again when I reboot, the windows media player quits unexpectedly in my snow leopard. I have tried installing it 3-4 times and every time the same thing happens.This is the message in the report.
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x00000000696e674a
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Seems like the wmv file corrupts the player.
    Pls help.Thanks.

    why are you using windows media player? it's deprecated and its support and development has been dropped for many years. if you need to run .wmv files install Flip4Mac or Perian plugins for QT player and use that. or use VLC player.

  • Windows Media Player  won't work on Amazon, others

    On Amazon.com and some other sites, when I click to listen with Windows Media Player, a message comes up that Safari doesn't support those files.
    Any ideas?
    Works fine on mp3.com

    WMP for Mac has been discontinued by MS. Use the free Flip4Mac QuickTime plugin Timothy referenced.

  • Windows Media Player won't work

    Suddenly Windows Media Player stopped playing any files that I have or have been sent. I can click on Windows Media Player, but nothing happens. Either the icon bounces and nothing happens, or nothing happens at all. I'm running the most recent version of Windows Media Player for Mac.

    Hi bramphetamine!
    Instead of WMP, you can use Flip4Mac.
    ali b

  • Windows media player does not open in new window

    When I go to a web site that may have several wmv files to view, if I view one, a new tab does not open for wmv. When I am through watching the clip, I close windows media, but it does not return me to the original web site, I just have a white screen and I have to go back and reload the page again to view another clip.

    Hi Paul,
    I face the same problem, any findings so far?
    Thanks!
    Best regards,
    Sandra

Maybe you are looking for

  • Satellite P300 - keypad going crazy

    Hi ! I have a Satellite P300, and my main board broke weeks ago. I picked it back this morning, but since the reparation, I have a little bit of a problem : The keyboard has a separate keypad, which a can activate/inactivate with the Num Lock key. Wh

  • I am trying to pass the value of a field from the seeded page /oracle/apps/

    I am trying to pass the value of a field from the seeded page /oracle/apps/asn/opportunity/webui/OpptyDetPG. The value I want is in the VO oracle.apps.asn.opportunity.server.OpportunityDetailsVO and the field PartyName. I have created a button on the

  • Rejection letters in Recruitment

    Dear collegues, can you help me with problem. I need to send rejection letters to candidates and I use transaction pb60 but i have a problem with field &PTXT1-PLSTX& (name of position) because it gives me an error on that field in word. To solve this

  • Clear Phone Memory

    I am using Nokia 3230 and memory size shows only 600 kb of space is available and i checked my phone memory. May be about 700 kb is being used and i want to find out how the rest of the space are being used and procedure to delete those.

  • Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro??

    Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro?? Currently, my mac can't update any of the software from App store as well as bulit in software like garageband.