Windows migration tool using external USB drive

Hi everyone,
My wife is using Windows Vista (BootCamp) on her MacBook now, but she finally decided to use Mac OS (it'll be Mavericks).
I believe that PC and Mac have to be connected via network (or Ethernet cable) to use Apple Windows migration tool, correct?
How can I migrate it in my case? Can I use MS (Windows) backup tool? Does Mac migration tool recognize this Windows backup? I prefer to use Apple migration tool, but any other good suggestions?
Please advise.
Thank you!

You are welcome.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information (may be called something else in 10.5).
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
You will need to get Snow Leopard.         Snow Leopard Purchase
Once you have Snow Leopard, boot off the Snow Leopard DVD, run Disk Utility Repair Disk and Repair Permissions, Then erase the entire hard drive (top one in Disk Utility) formatting it as Mac OS Extended (Journaled). Install Snow Leopard and update using Software Update to 10.6.8. The combo update will shorten the process.
10.6.8 Combo Updater
Then go to the App Store and download Mavericks. I would quit the installer and make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X
That should get you to Mavericks.
If you want/need more RAM the 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service.
Crucial
Other World Computing

Similar Messages

Can't use external USB Drive

Hello
I have 500 GB Hitachi usb drive , it was working fine until now, i can see the disk in disk utility, but i can't format it. I tried to repair the partition but it failed, now the partition dissapear but i still can see the disk in disk utility list, when i try to format it, after few minutes i get this:
Disk Erase failed with the error:
Couldn’t open device."
and previously i got this when formatting partition only:
Disk Erase failed with the error:
Couldn’t open device."

For SMART checking, I understand that has been a problem with external drives.
Looks like there may be a combination solution here and here.
Any help from drive manufacturer site?
Have you reformated it before? Some drive mfrs write invisible partitions for Windows.
I had one drive once which I had to reformat as FAT32 and erase before I could reformat as Mac OS Extended.

Can I install windows 7 to an external USB 3.0 drive via bootcamp?

with the new airport extremes supporting USB 3.0, can I install windows 7 to an external USB drive via bootcamp?
i'm not willing to sacrafice any of the limited space on the SSD, but i'm very willing to get a good performing USB 3 drive, and use it as necessary with windows.
if this wouldn't work via bootcamp, can it be done on a windows PC and plugged in subsequent to the install to work on the road?

Installing Windows on an external drive is not supported.

Copy my itunes library from desktop windows PC to an external USB hard drive

What is the easiest way to copy my Itunes library from a windows PC to an external USB Drive?

How to move iTunes library

Notebook hangs if there's an app actively using external USB disk

...right before going into sleep mode.
I have this notebook and an external USB SATA drive hooked up to it. When I put the laptop into sleep mode, then resume its work, after a while I'll get a blank screen that essentially looks a lot like tty1, all black background and gray symbols all over the screen. Essentially, the message I get is the following:
Dec 7 11:29:18 localhost kernel: [67351.155834] ESI: f6447e80 EDI: f46b05f0 EBP: f15a7e58 ESP: f15a7e40
Dec 7 11:29:18 localhost kernel: [67351.155834] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Dec 7 11:29:18 localhost kernel: [67351.155834] Process transmission-gt (pid: 2302, ti=f15a6000 task=f1255a40 task.ti=f15a6000)
Dec 7 11:29:18 localhost kernel: [67351.155834] Stack:
Dec 7 11:29:18 localhost kernel: [67351.155834] f15a7eac f46b05e0 f6447e80 f1255a40 f6447e80 f46b05f0 f15a7e6c c10d4f48
Dec 7 11:29:18 localhost kernel: [67351.155834] 00000010 f6447e80 f46b05e0 f15a7e84 c113be2c 00000000 efa3b930 ef1f4400
Dec 7 11:29:18 localhost kernel: [67351.155834] 00000000 f15a7e90 c113befa f1141600 f15a7eb4 f8046f1e f1141600 f804b3e4
Dec 7 11:29:18 localhost kernel: [67351.155834] Call Trace:
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c10d4f48>] account_page_dirtied+0x68/0x90
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113be2c>] __set_page_dirty+0x3c/0xb0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113befa>] mark_buffer_dirty+0x5a/0x90
Dec 7 11:29:18 localhost kernel: [67351.155834] [<f8046f1e>] ext2_sync_super+0x6e/0xd0 [ext2]
Dec 7 11:29:18 localhost kernel: [67351.155834] [<f8046fd1>] ext2_sync_fs+0x51/0x60 [ext2]
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1157640>] ? dquot_get_dqblk+0x180/0x180
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113a4ca>] __sync_filesystem+0x5a/0x80
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c113a539>] sync_filesystem+0x29/0x50
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c111656e>] generic_shutdown_super+0x2e/0xe0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1116649>] kill_block_super+0x29/0x70
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c111693d>] deactivate_locked_super+0x3d/0x60
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c11171f7>] deactivate_super+0x47/0x60
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c112ecd7>] mntput_no_expire+0x87/0xd0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c112ed38>] mntput+0x18/0x30
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1116154>] fput+0x134/0x1e0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1112d14>] filp_close+0x54/0x80
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1112db4>] sys_close+0x74/0xc0
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c134c11f>] sysenter_do_call+0x12/0x28
Dec 7 11:29:18 localhost kernel: [67351.155834] [<c1340000>] ? setup_local_APIC+0x2c9/0x3b8
Dec 7 11:29:18 localhost kernel: [67351.155834] Code: eb ce 8d 76 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 18 89 5d f4 89 c3 89 e0 25 00 e0 ff ff 89 75 f8 89 7d fc 83 40 14 01 8b 43 14
Dec 7 11:29:18 localhost [67351.155834] 8b 30 89 f7 c1 ff 1f 01 d6 89 45 f0 8b 45 08 11 cf 89 c2 c1
Dec 7 11:29:18 localhost kernel: [67351.155834] EIP: [<c11cf02f>] __percpu_counter_add+0x1f/0xe0 SS:ESP 0068:f15a7e40
Dec 7 11:29:18 localhost kernel: [67351.155834] CR2: 00000000342da000
Dec 7 11:29:18 localhost kernel: [67351.155834] ---[ end trace a7afafe94ef537f4 ]---
Dec 7 11:29:18 localhost kernel: [67351.182781] note: transmission-gt[2302] exited with preempt_count 2
By playing around I learned that if I kill transmission and any app that actively uses the USB disk prior to the sleep mode, and then start them after resume is finished and the disk is mounted (I use GNOME 3 in fallback mode, so it automounts the disk) everything works fine.
Now, I could ignore those messages but it gets worse. Mostly laptop will hang at a random point in time after printing that wall of text on tty1. It might take hours, or even days before this happens. Sometimes I'll find transmission in a freezed state and I may survive a couple of sleep and resume cycles but I almost never will go as far as 4 days and more in a row. The laptop will hang eventually. And the only way to avoid this is to kill off apps that use external USB drive prior to going into sleep mode.
Any ideas what's going on and how to fix this?
% uname -a
Linux host 2.6.39-ARCH #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011 i686 Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz GenuineIntel GNU/Linux

karol wrote:https://bbs.archlinux.org/viewtopic.php?id=131527
Thanks, however, my problem isn't speed, it's stability of the system.

Additional HDD - external USB drive helps?

Hi
I have iMac which has everything built in, so I cannot get inside to add additional hdd through PCI express slot. At the moment my iMac has one internal HDD 7200 rpm.
I know that to ensure better sustainability/efficiency it is preferred to have at least 2 hdds to keep system and audio files separately.
Would it make any sense to use external USB HDD to have SF2 samples library there and save my project folders with audiotakes? The reason of question is USB related limitations of data transfer speed. So if I use external USB drive - will it improve effeciency/sustainability or it becomes narrow place of the whole setup?
Thanks

10 audio tracks should work via USB, about the Samplers.... that's harder, it really depends on the size of the instruments, but in very general you should be able to read them from the Startup disk. If you have two disks, it is advised to use the external to store Logic Project folders (and therefore to record Audio to and playback audio from), but you should not put your Sample libs on it though, just put those on the startup disk (provided it is big enough of course, keeping in mind that you always need to keep around 20 % or more (with a minimum of 25 GB) of its capacity free.
btw, another disadvantage of external USB harddisks is that the USB protocol uses CPU power, you can loose 20-40% compared to FireWire, which has hardly any CPU-overhead.

How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

Yes, you’ll be able to do that.
(116841)

I would like to recover my bookmarks from my old hard drive that I now have as an external USB drive. The old OS was Vista; the new is Windows 7.

I recently had a new hard drive installed on my laptop; this hard drive has the Windows 7 OS on it.
At the same time, I had my old hard drive mounted in an SATB enclosure so that I could use it as an external USB drive. [I stupidly did not export my bookmarks before doing all of this]
Everything seems to work fine [I can see all of the files], but I cannot find out where my bookmarks are stored on the old hard drive.
Is it possible to find them and get them transferred over to the new hard drive??
Thanks!!

Bookmarks are stored in a file called places.sqlite inside the profile folder. You can copy that file from the old profile folder into your current profile folder. For details of how to find the profile folder see https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox
You can recover more than just the bookmarks - https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

How to run windows from an external usb drive

Hi,
I've just install windows using bootcamp. after that i restore that windows installed bootcamp volume to an GUID partitioned external HDD. Now it is shown in startup disc, but when i select that (external HDD) volume it is unable to start.
I don't know what to do? I just want to run windows from an external usb drive like i can run mac osx.
please help. thanks

Windows will not run from an external drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility. I'm running 10.8.2 from the external drive. When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens. Do I have to have internal drive to run Boot Camp Assistant? Can anyone provide me with the steps to dual boot, with his setup? Thanks in advance!

Hi maczimillon,
Only follow these steps, it works for my:
Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
Save changes and replace the original plist file (it may ask you to enter admin pass)
If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives.

Can I use a USB drive to install windows 7 on my Macbook Pro?

I currently have the Windows 7 iso on a usb flash drive. I am running bootcamp 4.0.3, and there is no option to create a windows 7 install disk via usb drive. Also I cannot download the Windows support software. Is there a direct download to the drivers, or another version of bootcamp that would allow me to install via usb, like the MBA? Or is there a way to work around this problem? I don't have access to any writable CD/DVDs so the usb drive is really my only option currently.

Copy the ISO to your disk and try using that to write the ISO to (another) USB device.
Instructions for the Air: https://support.apple.com/kb/HT4407
download a free iso burning program for Mac (we used SimplyBurns Mac). That program runs you through the necessary steps to properly burn the iso file you need. After doing so, Bootcamp recognized the installation file and everything worked as it should.
https://discussions.apple.com/thread/3410900?start=45&tstart=0
http://simplyburns.en.softonic.com/mac
If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

HP dv6-6188ca windows 7 pro 64b amd chipset 8G locks up copying files to/from external usb drive

When ever I try to copy a large (>2G) file to or from a external usb drive the computer starts the copy but gets stuck. It has to be powered off and the battery removed to get it to work again.

Please repost your inquiry in the Microsoft Windows 7 Performance Forum.
Thank you!
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

How to install windows 8 onto an external hard drive connected with usb 2.0?

How to install windows 8 onto an external hard drive connected with usb 2.0?

Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html

Install Windows XP on external USB drive - MSI 915P

I have a MSI 915P motherboard and i am trying to install Windows XP on my external USB hard drive. Everything is fine installing Windows XP but when it says to reboot the USB drive does not boot. Any help please?

BIOS is set to boot from USB device. It shows Windows XP Home Edition on my internal drive and XP Professional on my USB drive. Internal boots but USB hangs with a dark screen... ??? ??? ???

Windows migration tool using external USB drive

Similar Messages

Maybe you are looking for