Windows mobile wireless connectivity issues
Hi all,
In our wireless network , windows mobiles 8.0 are not able to connect . The SSID is using WPA2/AES encryption with 802.1x auth. The remaining clients are able to connect to the network and working fine. Even from windows phone 8.1 , I am able to connect to the network. The only difference I am seeing between these two mobiles are supplicant. In WP 8.1 i am able to choose the PEAP/MSCHAPv2 with no server validation options.
In WP 8.0 , it is directly asking for UN/PWD.the WLC is 2504 with 7.2.103.0 code.
The debug is below for 8.0 mobile
isco Controller) >*apfReceiveTask: Jun 11 12:01:51.076: ec:f3:5b:13:fe:5c Deleting mobile on AP 1c:e6:c7:84:7a:20(0)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Adding mobile on LWAPP AP 1c:e6:c7:85:25:b0(0)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 0 0 0 0 0 0 0 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfMsAssoStateInc
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Idle to Associated
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*osapiBsnTimer: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c 802.1x 'txWhen' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received Identity Response (count=3) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Reached Max EAP-Identity Request retries (3) for STA ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Sent Deauthenticate to mobile on BSSID 1c:e6:c7:85:25:b0 slot 0(caller 1x_auth_pae.c:3117)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 6) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Disconnected state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Not sending EAP-Failure for STA ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:84:7a:20
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:85:25:b0-0, new AP 1c:e6:c7:84:7a:20-0
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3for this client
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:84:7a:20 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.762: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*osapiBsnTimer: Jun 11 12:10:37.687: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c quiet timer completed for mobile ec:f3:5b:13:fe:5c
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 8)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:84:7a:20]
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:84:7a:20-0, new AP 1c:e6:c7:85:25:b0-0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.795: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.887: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:11:23.077: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:11:23.078: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c apfBlacklistMobileStationEntry2 (apf_ms.c:4864) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Exclusion-list (1)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 44) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to START (0) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Reached FAILURE: from line 4442
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 9) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Max AAA failure for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*osapiBsnTimer: Jun 11 12:11:42.287: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*osapiBsnTimer: Jun 11 12:11:47.288: ec:f3:5b:13:fe:5c apfMsExpireCallback (apf_ms.c:589) Expiring Mobile!
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 46) in 60 seconds
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c apfMsExpireMobileStation (apf_ms.c:5708) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Exclusion-list (1) to Exclusion-list (2)
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
Kindly give your opinions on this.
BR//
Vijay
Hi Najaf,
We have tried the same credentials only .
Level Date and Time Source Event ID Task Category
Information 5/19/2014 6:58:50 PM Microsoft-Windows-Security-Auditing 6273 Network Policy Server "Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: NULL SID
Account Name: xxxxxx
Account Domain: xxxxxxx
Fully Qualified Account Name: xxxxxxx
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 1c-e6-c7-xx-xx-xx:HM_BYOD
Calling Station Identifier: 4c-7f-62-xx-xx-xx
NAS:
NAS IPv4 Address: 10.x.x.x
NAS IPv6 Address: -
NAS Identifier: WLC
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 1
RADIUS Client:
Client Friendly Name: Wireless
Client IP Address: 10.x.x.x
Authentication Details:
Connection Request Policy Name: xxxxxxxxx
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: xxxxxxxxx
Authentication Type: PEAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 16
Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
Regards,
Vijay
Similar Messages
-
Lync 2013 Windows Mobile 8 connection issues
Hi
I have setup an internal test Lync 2013 system to get sign off from management. I have installed all the roles on a single server. So far clients on PC's can sign in and so can iOS devices once I had turned on the internal web settings. However, we use Windows
Mobile 8 devices and I can't get any to connect. What ever I try I get a message saying that I need to check my network connection.
These devices are on the same internal network as the iOS devices. Is there anything special that needs to be done for Windows Mobile to work?
Thanks.2013-12-09 13:26:57.393 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.440 Lync[4560:5068] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u03CD31B8): -2146697191
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d70d18)
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/581:Received response for meta data request of type 60 with status 570556417
2013-12-09 13:26:57.441 Lync[4560:4644] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable to get a response to an unauthenticated get to url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData retrieval for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com completed with status 570556417
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting 1 pended Meta data requests for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable to get the meta data for server url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-09 13:26:57.441 Lync[4560:4644] INFO TRANSPORT CRequestManager.cpp/273:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 0.000000 seconds
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2013-12-09 13:26:57.442 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest(03D48860): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-09 13:26:57.445 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2094:suspensionState = 2
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled = 1, sipUri = sip:[email protected], m_internalADUrlInput = m_externalADUrlInput =
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1003:Discover UCWA urls for sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/488:Extracted DOMAIN.com from sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1061:Starting Lync Discovery with urls http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected] and http://lyncdiscover.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], maxHops = 10
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://lyncdiscoverinternal.DOMAIN.com/, hopCount = 0, maxHops = 10
2013-12-09 13:26:57.446 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://lyncdiscoverinternal.DOMAIN.com/, Hops = 0, status = S0-0-0
2013-12-09 13:26:57.446 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.447 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
Request Id: 03D48860
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-09 13:26:57.447 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(03D48860)
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1883:Successfully started the GetUserUrlOperation request for https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], maxHops = 10
2013-12-09 13:26:57.450 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = http://lyncdiscoverinternal.DOMAIN.com/, hopCount = 0, maxHops = 10
2013-12-09 13:26:57.450 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.451 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET http://lyncdiscoverinternal.DOMAIN.com/
Request Id: 03D48F68
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-09 13:26:57.451 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(03D48F68)
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1915:Successfully started the GetUserUrlOperation request for http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.455 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 30.000000 seconds
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioManager.cpp/48:AudioManager::playOnce called.
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/69:Initializing AudioStream
2013-12-09 13:26:57.470 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/135:Initializing AudioClient
2013-12-09 13:26:57.472 Lync[4560:4620] INFO UTILITIES CHttpConnection.cpp/936:Headers Available with response status = 200 for request UcwaAutoDiscoveryRequest
2013-12-09 13:26:57.473 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/170:Setting AudioClient Properties
2013-12-09 13:26:57.473 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/220:Setting Stream Category 0
2013-12-09 13:26:57.474 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/181:Stream Category Successfully set to: [0]
2013-12-09 13:26:57.478 Lync[4560:4620] INFO UTILITIES CHttpConnection.cpp/1031:Response status = 200 for request UcwaAutoDiscoveryRequest
2013-12-09 13:26:57.478 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-09 13:26:57.478 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET http://lyncdiscoverinternal.DOMAIN.com/
Request Id: 03D48F68
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1182
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Mon, 09 Dec 2013 13:27:11 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server Microsoft-IIS/8.5
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn LYNCFQDN.DOMAIN.com
HttpHeader:X-Powered-By ASP.NET
<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=DOMAIN.com" /><Link token="User" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=DOMAIN.com" /><Link token="Self" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=DOMAIN.com" /><Link token="OAuth" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=DOMAIN.com" /><Link token="External/XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://LYNCFQDN.DOMAIN.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.491 Lync[4560:4644] INFO UTILITIES CXmlParser.cpp/181:parse returned 0
2013-12-09 13:26:57.491 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d48f68)
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscoverinternal.DOMAIN.com/, Hops = 1, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(03D48F68): S0-0-0 (Success); Done with req.; Stopping resend timer
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received. Status = S0-0-0, url = http://lyncdiscoverinternal.DOMAIN.com/
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url. url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com, maxHops = 1
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user, hopCount = 0, maxHops = 1
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user, Hops = 0, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], userUrl = https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com, status = S0-0-0
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-09 13:26:57.492 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x3d48860
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT ucmp/transport/session/private/CSessionBase.hxx/158:Cancelling request: 0x3d48860
2013-12-09 13:26:57.493 Lync[4560:4644] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (UcwaAutoDiscoveryRequest): -2147467260
2013-12-09 13:26:57.493 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected], userUrl = , status = W_Cancelled (W0-0-6)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (mamd1) username (prp350197) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/467:Sending Unauthenticated get to get the web-ticket url
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.493 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
Request Id: 03D6DE70
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2013-12-09 13:26:57.494 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.508 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(03D48860)
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery request to https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as current state is 6
2013-12-09 13:26:57.508 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request url was https://lyncdiscoverinternal.DOMAIN.com/?sipuri=sip:[email protected]
2013-12-09 13:26:57.563 Lync[4560:4624] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u03CD31B8): -2146697191
2013-12-09 13:26:57.564 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.564 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2013-12-09 13:26:57.565 Lync[4560:4644] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(4) returning: credType (1) signInName () domain () username () password.empty() (1) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(4)
2013-12-09 13:26:57.566 Lync[4560:4644] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
Request Id: 03D6DE70
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2013-12-09 13:26:57.566 Lync[4560:4644] INFO UTILITIES CHttpConnection.cpp/293:Empty body set?
2013-12-09 13:26:57.621 Lync[4560:4600] ERROR UTILITIES CHttpConnection.cpp/1115:Request failed with the WININET errorCode (0x%u031DA518): -2146697191
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x3d6de70)
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CMetaDataManager.cpp/581:Received response for meta data request of type 60 with status 570556417
2013-12-09 13:26:57.622 Lync[4560:4644] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable to get a response to an unauthenticated get to url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData retrieval for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com completed with status 570556417
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting 1 pended Meta data requests for url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable to get the meta data for server url https://LYNCFQDN.DOMAIN.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=DOMAIN.com
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-09 13:26:57.622 Lync[4560:4644] INFO TRANSPORT CRequestManager.cpp/273:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 60.000000 seconds
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 1 alerts
2013-12-09 13:26:57.623 Lync[4560:4644] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest(03D48860): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/191:Initializing Audio Render Client
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/229:Loading Wave file
2013-12-09 13:26:57.693 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/40:Initializing Wave Buffer
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/80:Verifying Wave Buffer information
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/118:Extracting Wave File Format
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/152:WAVE FORMAT : BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.694 Lync[4560:5068] INFO UTILITIES WaveBuffer.cpp/155:STREAM FORMAT: BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.697 Lync[4560:5068] INFO UTILITIES AudioStream.cpp/284:Starting playing the Audio Stream
2013-12-09 13:26:57.697 Lync[4560:5288] INFO UTILITIES AudioStream.cpp/334:Audio Stream Started.
2013-12-09 13:26:57.697 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/339:Wav file being played for the first time on AudioStream object.
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioManager.cpp/48:AudioManager::playOnce called.
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/69:Initializing AudioStream
2013-12-09 13:26:57.723 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/135:Initializing AudioClient
2013-12-09 13:26:57.726 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/170:Setting AudioClient Properties
2013-12-09 13:26:57.727 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/220:Setting Stream Category 0
2013-12-09 13:26:57.727 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/181:Stream Category Successfully set to: [0]
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/191:Initializing Audio Render Client
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/229:Loading Wave file
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/40:Initializing Wave Buffer
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/80:Verifying Wave Buffer information
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/118:Extracting Wave File Format
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/152:WAVE FORMAT : BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.740 Lync[4560:4624] INFO UTILITIES WaveBuffer.cpp/155:STREAM FORMAT: BitsPerSample: 32, SamplesPerSecond: 48000, Channels: 2
2013-12-09 13:26:57.743 Lync[4560:4624] INFO UTILITIES AudioStream.cpp/284:Starting playing the Audio Stream
2013-12-09 13:26:57.744 Lync[4560:5308] INFO UTILITIES AudioStream.cpp/334:Audio Stream Started.
2013-12-09 13:26:57.744 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/339:Wav file being played for the first time on AudioStream object.
2013-12-09 13:26:58.209 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/411:Reached end of wave buffer
2013-12-09 13:26:58.209 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/417:Done playing wav file. Sleeping till buffer ends.
2013-12-09 13:26:58.260 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/411:Reached end of wave buffer
2013-12-09 13:26:58.260 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/417:Done playing wav file. Sleeping till buffer ends.
2013-12-09 13:26:58.711 Lync[4560:5288] INFO UTILITIES AudioManager.cpp/75:AudioManager::clearAudioStream called.
2013-12-09 13:26:58.711 Lync[4560:5288] VERBOSE UTILITIES AudioStream.cpp/432:Audio is no longer playing
2013-12-09 13:26:58.712 Lync[4560:5312] INFO UTILITIES AudioManager.cpp/89:AudioManager::clearAudioStream invoked.
2013-12-09 13:26:58.712 Lync[4560:5312] INFO UTILITIES AudioStream.cpp/106:Releasing AudioStream
2013-12-09 13:26:58.763 Lync[4560:5308] INFO UTILITIES AudioManager.cpp/75:AudioManager::clearAudioStream called.
2013-12-09 13:26:58.763 Lync[4560:5308] VERBOSE UTILITIES AudioStream.cpp/432:Audio is no longer playing
2013-12-09 13:26:58.765 Lync[4560:5332] INFO UTILITIES AudioManager.cpp/89:AudioManager::clearAudioStream invoked.
2013-12-09 13:26:58.765 Lync[4560:5332] INFO UTILITIES AudioStream.cpp/106:Releasing AudioStream
2013-12-09 13:27:02.167 Lync[4560:4624] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UI]-PerfBegin: 4:SignOut
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/131:Clearing all(1) alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/497:Called signOut() in state 1
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 300, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 301, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 2, Type 302, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/975:CUcwaAppSession canceling all requests
2013-12-09 13:27:02.173 Lync[4560:4644] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState() state=0
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component UcwaSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component UcwaAutoDiscoverySession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component JoinLauncherSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component EwsSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component EwsAutoDiscoverSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component HttpFileDownloadSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component BrbSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component CpsSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component WebTicketSession on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component MetaDataManager on sign-out.
2013-12-09 13:27:02.173 Lync[4560:4644] INFO UTILITIES CWpAppStateQuery.h/102:Clearing keep-alive timer callback
2013-12-09 13:27:02.174 Lync[4560:4644] WARNING APPLICATION CApplicationInformation.cpp/136:Received CAppStateEvent in CApplicationInformation
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CCertificateProvisioningService.cpp/541:Clearing certificate from transport: 4edff623-687f-4443-8ab2-b610b8cfb099
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2013-12-09 13:27:02.174 Lync[4560:4644] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UCMP]-PerfBegin: 50:ObjectModelPersistencyWriteBatch
2013-12-09 13:27:02.174 Lync[4560:4644] INFO APPLICATION CApplication.cpp/942:CApplication::serialize() called
2013-12-09 13:27:02.208 Lync[4560:4644] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UCMP]-PerfEnd: 50:ObjectModelPersistencyWriteBatch
2013-12-09 13:27:02.208 Lync[4560:4644] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 1 out-of-sync Object Models took 34ms
2013-12-09 13:27:02.208 Lync[4560:4644] INFO APPLICATION CPresenceSubscription.cpp/792:Removed 0 success records, current size is 0
2013-12-09 13:27:02.215 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.216 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.217 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.218 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.219 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.220 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.221 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.221 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.222 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.223 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.224 Lync[4560:4644] VERBOSE APPLICATION NMePerson.cpp/69:Received me person event in OnUcmpEvent
2013-12-09 13:27:02.266 Lync[4560:4600] PERFORMANCE TESTPERF CMPerfTrace.cpp/128:[Perf][UI]-PerfEnd: 4:SignOut
2013-12-09 13:27:04.117 Lync[4560:4644] WARNING APPLICATION CUcwaAppSession.cpp/621:Could not find landing page link for tokenName = pushNotificationSubscription
2013-12-09 13:27:06.793 Lync[4560:4600] VERBOSE APPLICATION NUIAgentCommandChannel.cpp/17:NUIAgentCommandChannel::ChangeAgentLogFile
2013-12-09 13:27:06.793 Lync[4560:4644] VERBOSE APPLICATION CUIAgentCommandChannel.cpp/62:CUIAgentCommandChannel::changeAgentLogFile
Hi
Sorry for the delay in replying. I have tried your suggestions and a Windows Mobile 8 device will still not connect. I have saved the log files and attached them. I can't see what the actual error is!
I have recreated my internal Root CA to include http urls in crl & cdp as this is mentioned as an issue, but this hasn't worked either.
Thanks. -
Windows 10 Wireless Connection Issue
I recently upgraded to Windows 10 because I heard it would be fantastic but after the upgrade I could not connect to a wireless router. The router in my home is working fine and connects to other computers in the house as it always has but the upgrade to Windows 10 has completely stopped my ability to connect to wireless internet with this computer. With an ethernet cable I can still use the internet but that is useless because then it basically just becomes a desktop if I always need it plugged in to do everything. My laptop is only a few months old and ran like a charm before the upgrade to Windows 10. I tried to install updates for it while it was plugged into an ethernet but it did nothing. I have searched online to see if there is an update to my laptop that will fix this but nothing has helped. This also happened to a friend who has a Toshiba Satellite. I would post to Microsoft's website since this is obviously a problem with Windows 10 but I have tried to use the Microsoft forums in the past and I always get answers that walk me in circles. The HP Forums have always given me quality answers that actually helped me so I figured I would post here and hope for the best. Thank you to anyone who can help me. Computer Specs:HP Envy 17t LaptopIntel i7-5500U Processor12GB DDR3L System Memory1TB 5400RPM Hard DriveNvidia GeForce 840M 2GB Graphics CardIntel 802.11ac WLAN and Bluetooth [2x2]
See this post close to the top of this forum board:
http://forums.xfinity.com/t5/Security-and-Anti-Virus/Norton-Popup-re-Latest-Version-for-Win-10-Compatibility/m-p/2574395#U2574395 -
How to share mobile wireless connection from Win XP to mac?
Hi,
I have two comupters,one mac and one PC (win XP). I am trying to share the mobile wireless broadband from my PC to the mac. I set up the sharing from mac to PC successfully quite a while ago, but now I need to work extensively on mac. So I tried to set up the sharing in the other around and nothing worked at all. Here is what I did.
1. I enabled the sharing of the mobile wireless connection on PC.
2. I tried to set up a small/home network, but it didn't work on Mac as the windows softwares can't be run on mac
3. I also tried to set up a peer-to-peer connection from PC to Mac which also didn't work.
Does anyone how to do the sharing from PC to Mac? Thanks a lot!Okay, firstly some routers or mdoems come with 2 ports on the back so you can connect two different computers so simply plug them both in
if not, then i advise you buy a router which allows you to add numerous computers to the same network via wires or add numerous computers wirelessly
i have one computer connect to my netgear router -wired
i have one computer wirelessly connected with a Netgear USB wireless reciever
then i got my laptop which is connected via wireless
i have xbox live which i connect to the internet via my laptops wireless connection, this can be done with any pc or laptop aswell
what you do is
wireless networks - where it showws any detected networks
change advanced options - on the side
advanced tab
then allow other computers to use this computers internet connection
simple as
all you do is plug in your other pc or whatever -
Satellite U940 PSU6VA - Wireless connectivity issues
_*My specifications:*_
*Model:* Toshiba Ultrabook (Satellite U940 PSU6VA-00S002)
*Operating System:* Windows 8.1 x64 (upgraded from Windows 8 x64)
*Wireless adapter:* Intel(R) Centrino(R) Wireless-N 2200
*Wireless adapter driver version:* 15.10.0.12 (which is the latest for my device)
I have had this Ultrabook since February 2013, and throughout that period I have always had wireless connectivity issues, even after performing a factory reset. My wireless icon fluctuates between three states:
* Internet access
* Limited (in which case I cannot connect to the internet or any device on the network)
* Not connected - connections are available (and if I try to make it connect to the network, it will fail)
Sometimes my computer would instantly reach the "Internet access" state upon startup, and would remain in that state. Other times, it would be "Limited" for several minutes after starting up my computer before it finally connected, and even then the connection would drop out every now and then. At the worst, it would remain either "Limited" or "Not connected" indefinitely, no matter how many times I reset my wireless adapter or restarted my computer.
Until recently, I had always thought that these issues occurred randomly. However, I recently noticed that I always have a perfect connection whenever there are no other computers connected wirelessly to my home router, and I always experience issues of varying degrees when there is at least one other computer (or even a smartphone) connected wirelessly to the router. If there is another computer connected to the router via an Ethernet cable, this does not cause any problems; it is only wireless connections that interfere with my computer.
It is only this computer that has these problems; the other computers in my house never experience these issues, no matter how many computers are online. Also, my computer does not only experience these issues with my home router; it has the same issues on my university's wireless network.
My question is, how can I fix this? Is this a known bug, or is my wireless adapter defective? I know I can connect using an Ethernet cable where possible (I never have problems with Ethernet connections), but this is not always possible at university.> {quote:title=TomDexter wrote:}{quote}
> Intel page provides the Wlan driver for this WLan card and its v16.7.0 for Win 8.1
I just checked the page you linked to, but it recommends that laptop users obtain their drivers from their OEM rather than from Intel.
I had already checked for driver updates through both Toshiba Service Station and Device Manager (and checked both again just now). Toshiba Service Station tells me that there are no updates available, and Device Manager tells me that "the driver software for your device is up to date".
Should I update to Intel's latest driver anyway? If so, should I also install the Windows 8.1 version of "Intel PROSet/Wireless Wifi Software"?
> {quote:title=TomDexter wrote:}{quote}
> I would recommend you to check the Wlan functionality and performance testing each Wlan standard 802.11 B / G and N and additionally check the different Wlan channels (1-11)
I have found the WLAN channel setting in Device Manager and I will test it when I get the chance. But how do I change the WLAN standard?
Message was edited by: Justinian -
I am having wireless connectivity issues with my time capsule
Over the last 3 days my wireless devices have been having issues with connectivity.
Network setup:
Modem - Motorola SB5102 Cable Modem
1 TB Time Capsule 802.11n (second generation)
The devices are approximately 3 feet apart.
Wired Device:
Mac Pro (2008 build) running OSX 10.6.8, Airport Utility 5.6.1
Wireless Devices:
Playstation 3
Macbook Air
iPhone 5c
iPhone 4
I am having issues with internet connectivity. The wireless signal strength is fine as all devices can find the network. However when connected to the network accessing the internet on the Macbook Air, or either iPhone is slow and streaming services such as Netflix cannot connect. I have intermitant connectivity to the Playstation Network on the PS3.
I have wired both the Macbook Air and PS3 directly to the Time Capsule and have no issues, internet is accessible and streaming services are fine.
I have power cycled all the devices (Time Capsule, macbook, iphones, PS3, modem) to no result.
I am looking for any other suggestions that may help me with my wireless connectivity issue.A Gen2 TC is probably on its last gasp.. and it is well overdue for replacement.
If you want to get more life out of it you normally need to repair or replace the internal power supply.. This is not done by apple or any of their repair centres.
Just do ebay search and you will find sellers with replacement supplies.
Otherwise to test, do a full factory reset..
I would also downgrade the firmware.. 7.5.2 will work just as well for you and has less bugs than 7.6.x firmware.
To downgrade hold down the option key when you select firmware version.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.
Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I have read extensively on this problem and it seems others have the same issue, however I will fully document the problem I have here and will also be sending this to apple as a bug report.
I have a Macbook Pro (3.1) running leopard 10.5.4 however these issues have occurred since 10.5.2 from memory, it may have been after an airport update but I wasn't using wireless around the time I updated. The router I have issues with is a Zyxel P660HW-T1, on which I have updated to the latest firmware (which isn't that new). Since an update I cannot connect to the router when using WPA encryption. This includes WPA-PSK and WPA2-PSK, on any wireless channel. The console errors when connecting are:
Aug 10 12:33:20 Nicks-Mac kernel[0]: AirPort: Link Up on en1
Aug 10 12:33:27 Nicks-Mac airportd[347]: Error: Apple80211Associate() failed -6
Aug 10 12:33:27 Nicks-Mac SystemUIServer[135]: Error: airportd MIG failed = -6 ((null)) (port = 55559)
Aug 10 12:33:27 Nicks-Mac airportd[347]: Error: processcommanddict() failed
Aug 10 12:33:27 Nicks-Mac SystemUIServer[135]: Error joining BroW: Connection timeout (-6 timeout connecting)
When connecting, the menu bar icon appears connected for a short time and then disconnects and the dialog box reports 'Connection Timeout'. Since this problem occurs I have reformatted the computer, reset the PMU and PRAM, and successfully connected to many other wireless networks using encryption. I have tried connecting to the network using windows in boot camp, and it doesn't work there either so the issue is firmware related. There were no issues before the update.
I have successfully connected to the wireless network using many other devices, including windows and linux computers, and windows mobile devices. Interestingly an iPod Touch exhibits the same problem; it used to work and now doesn't.
While I know buying a new router or Zyxel releasing a firmware update would resolve the issue, I feel that because it works with standard PC devices it is apple that should be resolving this problem as they created it. This router was one of the most popular on the store I bought it from here in the UK, and so it should be a fairly big issue. If the problem has been created due to a security hole in the WPA protocol being plugged, or something similar to this, it is understandable. Official word from Apple is needed on this!William Kucharski wrote:
You won't get official word here; it's just users here.
I know, I wasn't hoping for official support or in fact any kind of help, I was posting this more as information for other users. I will be submitting it as a bug report in the hope it will be recognised officially. I don't think there is anything I can do that will resolve this.
As far as the connection goes, if it was truly the router at fault it wouldn't be Apple's problem to fix, as Apple codes their drivers to comply with recognized wireless standards and it isn't Apple's responsibility to write their code to accomodate routers that don't.
As I said it would be understandable if this was caused due to a bug fix in the protocol by apple and I would not expect a fix. That's the information I'm hoping for but doubt I will get. Having said this, think about it from the end users point of view. In terms of 'Just works', Mac 0 PC 1.
That having been said, you know from your experience connecting with other routers that it's not a blanket bug, so the next question would be what's different about your network that is causing these connection failures.
One thing to try is to try removing all known networks from your known networks in your Network preference pane, and add them back.
As I said, this is an issue with Apple devices, and seems to be a firmware and not a software issue. I have reformatted and tried connecting in windows, had the same problem with an iPod touch and a Macbook.
Message was edited by: Nick Brook -
Lync 2013 for iPad & Windows Mobile Sign in Issue
Hi,
I hope someone can help with a very frustrating issue I'm having with Lync 2013 on iOS & Windows Mobile - it won't sign in with an error message saying 'We can't sign you in. Please check your account info and try again'
I know my account info is right as I use it to sign in to the desktop client when working remotely, and it also works fine on an Android client.
The Lync remote connectivity analyser passes all the tests, I can get to the xml file using https://lyncdiscover.domain.org/autodiscover/autodiscoverservice.svc/root from a laptop, but from the iPad it's just a blank screen.
I've tried using auto detect, and entering details manually, but still no luck. I'm completely stumped. I've trawled blogs, form posts etc, but nothing. HELP!!!
Some details - we have a FE server, and an Edge Server, both running Lync 2013 with latest updates. We use nGinX as the RP and that all seems to be fine. It just doesn't want to authenticate me (or anyone else).
See below part of log file from my iPad that shows an error on the FE server.
</SentRequest>
2014-03-07 08:19:36.200 Lync[1615:74c6000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x589d0a0 for url - http://lyncdiscover.domain.org/ with persistent id as 7
2014-03-07 08:19:36.200 Lync[1615:74c6000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url http://lyncdiscover.domain.org/. Sending over direct connection.
2014-03-07 08:19:36.200 Lync[1615:74c6000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not setting TLS as the url(http://lyncdiscover.domain.org/) is not https
2014-03-07 08:19:36.205 Lync[1615:3bc6218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-03-07 08:19:36.206 Lync[1615:3bc6218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-03-07 08:19:36.206 Lync[1615:3bc6218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-03-07 08:19:36.206 Lync[1615:3bc6218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-03-07 08:19:36.206 Lync[1615:3bc6218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-03-07 08:19:36.595 Lync[1615:74c6000] INFO UTILITIES CHttpConnection.cpp/577:Received kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable = true responseHeadersHandle = 58b1930
2014-03-07 08:19:36.596 Lync[1615:74c6000] INFO UTILITIES CHttpConnection.cpp/651:Response status = 200 for request UcwaAutoDiscoveryRequest
2014-03-07 08:19:36.597 Lync[1615:74c6000] INFO UTILITIES CHttpStreamPool.cpp/455:Scheduling stream 0x58812c0 for release.
2014-03-07 08:19:36.597 Lync[1615:74c6000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x0
2014-03-07 08:19:36.598 Lync[1615:74c6000] INFO TRANSPORT TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET https://lyncdiscover.domain.org/?sipuri=sip:[email protected]
Request Id: 0x11d4988
HttpHeader:Cache-Control no-cache
HttpHeader:Connection keep-alive
HttpHeader:Content-Length 1025
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Fri, 07 Mar 2014 08:19:34 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server nginx/1.4.1
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn KPPLYN04.ad.domain.org
HttpHeader:X-Powered-By ASP.NET
Ôªø<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="External"><Root><Link
token="Domain" href="https://extwebsvc01.domain.org/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain.org" /><Link token="User" href="https://extwebsvc01.domain.org/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain.org"
/><Link token="Self" href="https://extwebsvc01.domain.org/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain.org" /><Link token="OAuth" href="https://extwebsvc01.domain.org/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain.org"
/><Link token="External/XFrame" href="https://extwebsvc01.domain.org/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame" href="https://ly13webpool.ad.domain.org/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://extwebsvc01.domain.org/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2014-03-07 08:19:36.599 Lync[1615:74c6000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/119:location value is external
2014-03-07 08:19:36.600 Lync[1615:74c6000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
2014-03-07 08:19:36.601 Lync[1615:74c6000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x11d4988)
2014-03-07 08:19:36.602 Lync[1615:3bc6218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-03-07 08:19:36.602 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2014-03-07 08:19:36.602 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = https://lyncdiscover.domain.org/?sipuri=sip:[email protected], userUrl = https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org,
status = S_OK (S0-0-0)
2014-03-07 08:19:36.603 Lync[1615:3bc6218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x11d4988): S_OK (S0-0-0) (Success); Done with req.; Stopping resend timer
2014-03-07 08:19:36.603 Lync[1615:3bc6218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2014-03-07 08:19:36.603 Lync[1615:3bc6218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x1124488
2014-03-07 08:19:36.604 Lync[1615:3bc6218c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling request: 0x1124488
2014-03-07 08:19:36.604 Lync[1615:3bc6218c] INFO TRANSPORT CTransportThread.cpp/163:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-03-07 08:19:36.604 Lync[1615:3bc6218c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url = http://lyncdiscover.domain.org/, Hops = 1, status = W_Cancelled (W0-0-6)
2014-03-07 08:19:36.605 Lync[1615:74c6000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-03-07 08:19:36.605 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url = http://lyncdiscover.domain.org/?sipuri=sip:[email protected], userUrl = , status = W_Cancelled
(W0-0-6)
2014-03-07 08:19:36.605 Lync[1615:74c6000] INFO UTILITIES CHttpStreamPool.cpp/455:Scheduling stream 0x589d0a0 for release.
2014-03-07 08:19:36.606 Lync[1615:3bc6218c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (ad) username (ab00wk) password.empty() (0) certificate.isValid() (0)
privateKey.empty() (1) compatibleServiceIds(1)
2014-03-07 08:19:36.606 Lync[1615:3bc6218c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
2014-03-07 08:19:36.606 Lync[1615:3bc6218c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending Unauthenticated get to get the web-ticket url
2014-03-07 08:19:36.607 Lync[1615:3bc6218c] INFO TRANSPORT CTransportThread.cpp/131:Added Request() to Request Processor queue
2014-03-07 08:19:36.607 Lync[1615:3bc6218c] INFO TRANSPORT CAuthenticationResolver.cpp/108:Waiting on Meta Data from https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
2014-03-07 08:19:36.607 Lync[1615:6081000] INFO TRANSPORT CTransportThread.cpp/343:Sent Request() to Request Processor
2014-03-07 08:19:36.607 Lync[1615:3bc6218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(0x11e6bf8)
2014-03-07 08:19:36.608 Lync[1615:6081000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for serviceId (4) type (1)!
2014-03-07 08:19:36.608 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1194:Submitting Authenticated AutoDiscovery request to https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
2014-03-07 08:19:36.609 Lync[1615:6081000] INFO TRANSPORT TransportUtilityFunctions.cpp/631:<SentRequest>
GET https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
Request Id: 0x1124488
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2014-03-07 08:19:36.609 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1688:Ignoring GetUserUrlOperation event as current state is 6
2014-03-07 08:19:36.610 Lync[1615:3bc6218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1690:Request url was http://lyncdiscover.domain.org/?sipuri=sip:[email protected]
2014-03-07 08:19:36.610 Lync[1615:6081000] INFO UTILITIES CHttpStreamPool.cpp/409:Allocating stream 0x58bf6c0 for url - https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user with persistent id as 15
2014-03-07 08:19:36.610 Lync[1615:6081000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for url https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org. Sending over
direct connection.
2014-03-07 08:19:36.941 Lync[1615:6081000] INFO UTILITIES CHttpConnection.cpp/577:Received kCFStreamEventEndEncountered (0x%u0x104bc00)isHeadersAvailable = true responseHeadersHandle = 58b6bd0
2014-03-07 08:19:36.942 Lync[1615:6081000] INFO UTILITIES CHttpConnection.cpp/651:Response status = 401 for request 0x%u0x104bc00
2014-03-07 08:19:36.943 Lync[1615:6081000] INFO UTILITIES CHttpConnection.cpp/718:Not send authenticating request(0x%u0x104bc00). isAuthObjectValid - 0, areCredentialsValid - 0, resendRequestCounter - 1
2014-03-07 08:19:36.943 Lync[1615:6081000] INFO UTILITIES CHttpStreamPool.cpp/455:Scheduling stream 0x58bf6c0 for release.
2014-03-07 08:19:36.943 Lync[1615:6081000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x0
2014-03-07 08:19:36.944 Lync[1615:6081000] INFO TRANSPORT TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET https://extwebsvc01.domain.org/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.org
Request Id: 0x1124488
HttpHeader:Cache-Control no-cache
HttpHeader:Connection keep-alive
HttpHeader:Content-Length 1293
HttpHeader:Content-Type text/html
HttpHeader:Date Fri, 07 Mar 2014 08:19:35 GMT
HttpHeader:Server nginx/1.4.1
HttpHeader:StatusCode 401
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn KPPLYN04.ad.domain.org
HttpHeader:X-MS-WebTicketSupported cwt,saml
HttpHeader:X-MS-WebTicketURL https://extwebsvc01.domain.org/WebTicket/WebTicketService.svc
HttpHeader:X-Powered-By ASP.NET
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>401 - Unauthorized: Access is denied due to invalid credentials.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
</fieldset></div>
</div>
</body>
</html>
If you need any further info, please let me know.
Thanks in advance
AronHi,
Did the sip address name match with User Principle Name?
If not, when you enter the login information please also populate the Username filed using the format domainusername and test again.
Here is a blog may help you, it is for Lync server 2010 but similar for Lync server 2013:
http://blogs.perficient.com/microsoft/2011/12/lync-mobility-understanding-sip-sign-in-address-vs-user-principle-name-upn/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Dear Steve, will anything be done about this wireless connectivity issue?
This is no fun whatsoever....
I am telling you - browsing interenet on iMac is no fun, seriously.
I prepared a quick research for you:
http://discussions.apple.com/thread.jspa?threadID=830426
http://discussions.apple.com/thread.jspa?threadID=834613
http://discussions.apple.com/thread.jspa?threadID=831111
http://discussions.apple.com/thread.jspa?threadID=829204 (I like this one best)
http://discussions.apple.com/thread.jspa?threadID=827632
http://discussions.apple.com/thread.jspa?threadID=833593 (although marked as solved - doesn't seem to be true in my and many others' cases)
http://discussions.apple.com/thread.jspa?threadID=838501
http://discussions.apple.com/thread.jspa?threadID=822703
http://discussions.apple.com/thread.jspa?threadID=826128
People, help me in refining this list - did I leave something out?
P.S. I was thinking lately, why, after spending so much money, should I spend several days already, in agregate, trying to understand the issue and how it should be resolved? Have I not paid for not having such problems?Here is a lot more:
http://www.macintouch.com/readerreports/wirelessnetworking/topic4035.html
Highly interesting is the post of J.Exby which i reproduce here:
For months I've not been alone in holding to the notion that the airport client software on Mac OS X 10.4.x has been problematic and unstable in certain (noisy, crowded, channel overlapped) wireless environments. Issues littered around the Internet Mac forums include problems of networks appearing, then disappearing. This is a difficult problem to pin down, given the difficulty of reproducing the conditions that might cause wireless network dropouts.
A major symptom of the problem was seeing the constant messages of:
"An error occurred joining the AirPort network" (Try Again) (Cancel)
when attempting to connect to a wireless network, despite that network being seen, having correct security settings, etc.
Various temporary fixes/ideas floated around the mac community have included:
- reseting pram, nvram and PMU
- installing 10.4 from scratch, instead of 10.3 to 10.4 upgrade process
- Repairing permissions, run Combo updaters, etc
- putting system to sleep or reboot for temporary connection fix
- applying AirPort 2005-001 patch (or not)
- upgrading (or downgrading!) AirPort basestation firmware
- changing AirPort channels
- enabled (or disabling) Interference Robustness
- disabling Bluetooth and BT peripherals
- removing WEP/WPA passwords out of Keychain
- running Keychain First Aid on user/login keychains
- buying new AirPort extreme cards
- replacing AirPort base stations with other vendor hardware, etc.
With the stability of our Windows XP clients now (after driver updates) and the change from Apple base stations to Belkin Wireless Pre-N Router having no appreciable benefit for our Mac notebooks, the OS X AirPort client software suspicions only grew.
During troubleshooting I always have
Applications--->Utilities--->Console
and
iStumbler (96)
running, and I watch output as wireless scans are performed.
From the Terminal I also run:
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport -s
and usually see constant
AirPortScanner WirelessScan error -2013261821 airpInternalErr
messages.
After two days of testing (and fixing?) I am even more convinced there are bugs in the powerpc 10.4.x AirPort Extreme Framework!
This is what I found:
Environment at our office:
- wireless Network A (802.11g channel 1, WPA personal)
- wireless Network B (802.11b channel 6, WEP 40bit ascii)
- wireless Network C (802.11g channel 11, WPA personal)
(WAR-marching around our office exterior shows at least 12 outside wireless networks found at various signal strengths!)
Test systems used:
- iBook G4 (10.3.x and 10.4.5)
- Powerbook G4 (10.4.5)
- Intel iMac (10.4.5)
Primary symptom on iBook: networks not displaying long enough under the AirPort icon/menu (or Internet Connect) to connect to ANY network reliably! Perhaps connect to Network A intermittently, never even see Network C.
iStumbler showing some networks respond to poll, then immediately stagnate/disappear.
Primary symptom on Powerbook: stable connections to Network C most times, difficulty "switching" to Network B or A once moving closer to source. Usually stable "seeing" networks via AirPort menu icon, but still have occasional dropouts (due to fluctuating signal strength or interference?).
Primary symptom on Intel iMac: NO PROBLEMS! Can connect to (and steadily "see") all valid Networks A, B, C !
iStumbler constantly polls all available networks, with no dropouts.
Steps taken:
1. Wipe iBook hard drive, install 10.3 from dvd. AirPort signals unreliable.
1a. Perform all 10.3.x Software updates, Repair Permissions, reboot. AirPort still unreliable.
2. Reset PRAM, nvram, PMU. no improvements.
3. Reseat AirPort Extreme card, ensure antenna is firmly plugged in. AirPort still unreliable.
4. Wipe iBook, install 10.4.3 "fresh" from Full retail version DVD. AirPort still unreliable.
4a. Perform all 10.4.5 Software (combo) updates, Repair Permissions, reboot. AirPort still unreliable.
5. Hold down the Option key, and click on the AirPort icon in the menu bar.
select About AirPort...
pay particular attention to each system showing:
iBook: AirPort Framework 421.13.0
powerbook: AirPort Framework 421.13.0
intel iMac: AirPort Framework 426.1.0
Aha! A big difference with the AirPort Framework component version on the Intel iMac!
6. So, using the Terminal let's get this newer Apple80211.framework onto the iBook.
First on the intel iMac:
cd /System/Library/PrivateFrameworks
sudo tar cf ~/intelApple80211frame.tar Apple80211.framework
Copy this intelApple80211frame.tar file onto a USB thumb drive, CDR, iPod, scp, etc. to copy it onto the iBook (home directory).
7. With the tar file copied into the home area on the iBook, turn off iBook's AirPort via the menubar icon.
Now launch Terminal and:
mkdir backup-framework
cd /System/Library/PrivateFrameworks
sudo mv Apple80211.framework ~/backup-framework/
sudo tar xvpf ~/intelApple80211frame.tar
Launch Disk Utility, Repair Permissions on boot drive.
Reboot iBook.
8. Turn Airport on via the menubar icon.
iBook now has HUGE improvements in wireless connectivity! It can "see" all Networks A, B, C reliably and can connect to any of them when in range (having enough signal strength). Switching between networks is successful 90% of the time. Occasional message of:
"An error occurred joining the AirPort network (Try Again) (Cancel)"
usually works after clicking (Try Again), whereas before Try Again almost always failed.
I am unsure how this newer Apple80211.framework will affect future Software Updates on the iBook, but frankly I could care less now that it's able to access all of our wireless networks!
I am unsure if this is the magic-bullet solution for a majority of people, but I'm stunned that Apple appears to be providing new and improved Apple80211.framework software with the intel iMacs, but many of us have been fighting AirPort problems on PowerPC platforms for months!
Come on Apple, OS X 10.4.5 should contain the SAME software component versions for ALL CPU platforms!
Source: http://www.macintouch.com/readerreports/wirelessnetworking/topic4035.html -
Wireless Connectivity issue (WRT54G)
Ok.... I'll try and explain the problem as best I can.
My family has been using a WRT54G to network the house computers (1 or 2 desktops running via ethernet and 3 laptops running via wireless) for years, and it's always worked perfectly, up until January... Coincidentally? the inability for some computers to connect via wireless coincided with the installation of Windows 7 Beta on one of the laptops. Since then, We have only very rarely been able to have all three laptops connected to the wireless at the same time (computers connected via ethernet have always worked, and the laptops work fine when connected via ethernet). Usually unplugging and letting the router reset itself works fine to get at least two of the computers running (the other not even being able to see the network).
The router is running these settings (just reply and I can get anything else you need)
Firmware Version: v1.02.2, Capture(month.num6) Jun. 7, 2007 Wireless Channel- 6- 2.437GHz
Wireless SSID Broadcast- enable
Status- SES inactive
Wireless network mode- Mixed
Also, for some reason, The network no longer has the correct name, and it is unsecured.... any reasons why? this is driving us nuts.
Thanks,
VolundI'm surprised noone has responded yet. I'm having the same issue and based on searches I've done, this is a frequent problem with this router when a Windows 7 computer connects to it. In my case I have a notebook that dual boots XP and 7. XP works fine and has been working for a long time. As soon as I boot to 7, all connections on the router drop. Very annoying. Hopefully someone has the answer.
-
Hello, I am having internet wifi connection issues with my laptop computer.In the bottom right corner of my taskbar, it says "Network Internet Access"However, I am not getting connection through any of my browsers.I am able to get wifi connection through my Nintento Wii U, but not my laptop. When I turn wifi button on keyboard off and then back on quickly, I only get connection for a single second; then no connection at all. I have tried the following:1.) Tried to connect to friend's wifi, but could not connect to the network 2.) Ran troubleshooting for wifi and it said two errors: broken access point and plug or wireless not plugged in properly 3.) Ran Wireless Network Troubleshooting for when I tried to connect to my wireless router and results are: couldn't identify the problem..(network connected internet access, but no connection to any browser) 4.) Checking the status of wireless driver and results are this device is working properly 5.) Uninstalling and reinstalling Intel Wireless driver through device manager 6.) Unchecking box that says turn this wireless driver off to save power 7.) Checked Windows Firewall to see what boxes are checked and unchecked...not sure what to look for 8.) Disabled and Inabled wireless network driver I noticed that there is a slight rattling noise coming from inside my laptop not sure what came lose or what has become broken from the inside; I never droped it, but I did hit it slightly once or twice against wall while the laptop was in laptop case strapped to my right shoulder... Is it possible that I may have a broken wireless card that is inside my laptop?I ask this because this is very much my concern.
Welcome to the forums. You're talking to other customers here.
What model DSL Modem / Router do you have? Have you tried loging into it to adjust the WiFi Settings? Do you devices see your WiFi network?
Is it possible a neighbor has installed a WiFi network that is interfering with your network?
Know that we peers here only know what you tell us. The more information you share about your problem, the more likely someone here will be able to help you.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
Thinkpad Edge E15 302-45U Wireless Connection Issue
I had to do a fresh install of windows 7 professional. Everything is working aside from the wireless connection. I've downloaded each wireless driver and still the issue persists. I can see the connection being broadcasted, upon entering the password to connect I only get "windows was unable to connect to xxx".
I can connect to this wireless point from my phone and my other laptop plus no one else in the office is having this issue. Only on this Thinkpad am I having the problem.
If I try to use the Intel PROSet/Wireless Tools diagnostics I get a FAILED-Wireless Hardware is not bound to transport driver. I've tried everything at this point with no luck. The LAN works fine of course but I need the Wireless to work.
Thanks
Solved!
Go to Solution.Nothing?
-
BT Infinity - Wireless Connection Issues
I have had this product for over a year now, and I have to say it is amazing that I have lasted thislong without throwing the router out of the nearest window!!
Does anyone else experience such poor wireless connections??? i.e. up and down, up and down, up and down, all day long, any time of day, any day of the week. It is shockingly bad!!!
I've changed channels, I've paid for an engineer to check the connection point, even though it's exactly the same one, and in the same position that the engineer installed it.
I'm really at the end of my tether!
Anyone, care to offer any advice?
We are a family of 6, with many many gadgets, i.e. iPads, iphones, Xboxes, laptops, ipods, etc. are we being penalised for having too many wireless devices? Can the BT Infinity product only cope with a certain amount of wireless devices?
PLEASE HELP!!!If you have tried all the wireless checks/changes ie moved the HH3 off Automatic onto a clear channel.
Inssider is a good free wireless scanner for windows, that can help identify a clear channel to move the HH3 to.
Inssider video HERE.
Then you may want to consider another route. I note in Ady wrote in msg #21 and 25 HERE.
"My Netgear WNDR3700 got delivered today................
WOW! - what a router!!!!
My laptop now connects at 150Mbps and stays like it, Xbox 360 and Apple TV 2 all work flawlessly on the Wireless Network.
What can I say - anyone having issues with the Home Hub 3, get this router, you will not be disappointed!!!"
And more choice HERE.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR) -
HP DV1000-wireless connect issue
Hello,
I have a DV1688US that just experiencde issues with connecting to my home wireless network. Operating system XP. I have not had any issues with connecting previously.
The wireless button is on and I am able to see the wireless connections. The icon that shows signal strenght says "trying to connect".
I went to a friends house and was able to connect to the internet , but when I plugged in my itouch, I lost the connections. I rebooted the computer and was able to reconnect with no issues.
I went back home and continue to have the same problem. I have AVG anti virus and tried disableing that, but the problem continues.
I'm not the most computer literate but appreciate any help.
Thank you, CKHello @sfk129,
Welcome to the HP Forums!
I understand you're experiencing problems printing from your iPad using the Laserjet M1212nf. I will do my best to assist you! I would recommend following this entire HP document on Printing from an Apple Mobile Device. Click on "Printing with AirPrint", then click on "Click on "No AirPrint Printers Found".
This printer has to be connected by an Ethernet cord to your router. It cannot be setup wireless. The manual here provides this information. Click on "Connect the product". I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.
Maybe you are looking for
-
Problem with $ORACLE_HOME 10g RAC
Hi, I have a doubt that I want to post here. The SAP-ORACLE Installation guide specifies that the path to ORACLE_HOME for a oracle 10.2g intallation should be "/oracle/<SAPSID>/102_64", but we got "/oracle/<SAPSID>/1020_64" I'm asking: Is any problem
-
Multiple Queries in a workbook
Hi Gurus If we have multiple queries in a workbook in 3.5 version and when we upgrade it to BI 7.0 version the data got overwrited........ (I heard this scenario from my friend) But how to solve this kind of scenario. Does scrolling option works...
-
I know this has been addressed but I'm hoping to finally get this straight in my head: I seem to have two sets of my applications. One set is in my Home in an applications folder and the other set is in Applications (in the "Places"). I suspect this
-
How to e-mail discoverer reports on scheduled timings
want to send discoverer reports to customers through e-mail,does discoverer provides any utility that does without manual intervention.It should be happened at scheduled timings.
-
Public sector records managment
Hai, How the business workplace (SBWP) of records management is different from work basket of public sector records manegement? Thanks, KK