Windows multipoint server 2012 wmsShell error

I'm using windows multipoint server 2012 premium and i have connected 16 nos of Atrust m320 zero client, it was working fine for 1 month, but now it has some problem. when i switch on my server after windows boot i'm not getting login screen and it is directly
login to wmsShell user, same time keyboard mouse not detecting and clients are not connecting to server. Please give me some solution.
click on below link to see the problem
https://www.youtube.com/watch?v=N36zOBndfPs&feature=youtu.be

I have the same problem when Microsoft Updates are installed that after the reboot it automatically logs into the WmShell account and displays the My Documents folder of WmShell.
I resolved the issue by exiting the Document Folder, doing a CTRL+ALT+DEL, signing out of the WmShell account, and logging back in as Administrator > Local Machine name.
Once in go to Control Panel > User Accounts and delete all references to wm???????
Reboot the server and it should come back into normal client mode.

Similar Messages

What kind of anti-virus software works with Windows Multipoint Server 2012?

Is there any certified anti-virus software for Multipoint server 2012?

You can use ie one of these
System Center EndPoint Protection
ESET Antivirus
McAfee VirusScan Enterprise
Symantec Protection Suite

Windows Multipoint Server 2012 black screen - screensaver pops up frequently

Hi,
After install WMS 2012 and patch WMS-KB2791647-ENU-x64, all hardware drivers and patches, the system ran well for 2 days, but then the screen
saver pops up frequently with visible mouse pointer.
When
the screen saver pops up and I move
the mouse, the desktop near the mouse appears but soon the screen switches from desktop to screen saver. Please check the video below:
https://onedrive.live.com/embed?cid=3DF42D4FE0756054&resid=3DF42D4FE0756054%21219&authkey=AEpUbFn6Q_ngTWM
The issue is gone in safe mode.
Disabling screensaver doesn't work.
The graphic card is Nvidia Q600, with latest driver.

Can you provide more information about the setup you have for your server? Specifically whether or not it is domain joined or not and whether there are any specific policies that might have changed to trigger the behavior? Also, the information about the
number of users, types of user (domain/local), the types of station (USB direct connect, thin clients, zero clients, etc.) would be helpful.

Display Drivers for intel (R) G45 express chipset on windows 8(multipoint server 2012) 64 bit

HI
I recently bought windows multipoint server 2012 from Microsoft which comes with windows 8. I am having trouble with installing display drivers from my computer's manufacturer. The display device is Intel (R) G45 express chipset. Intel only supports
windows 7 and when I try to troubleshoot it's compatibility, the driver still does not work. I get an error notifying me that my computer does not meet the minimum requirements. My computer system is 64 bit and the drivers I download are meant
for 64 bit systems, I am currently using Microsoft basic display adapter and when I try to automatically update the driver it says that the drivers are up to date
why do I get the error that my computer does not meet the minimum requirements?
and what can I do to get the drivers working on windows 8?
PLEASE HELP
THANK YOU IN ADVANCE

I had the most up-to-date Intel driver installed, as far as Windows can determine (right click Intel display adapter -> update drivers, search automatically). I was also using that exact download you linked me to.
I also tried switching my graphics card to dedicated discrete mode in BIOS, which made my device ID change, but it too was not supported. I have since managed to reinstall the old drivers from 2010.
Is there some place I can go to download a more recent version of the Intel drivers than Windows can find automatically?

Multipoint Server 2012 - Display Sleep

I have several WMS 2012 boxes with Atrust m300 zero clients. I am having an issue since upgrading from WMS 2011 that my zero clients displays don't sleep. The direct connected ps/2 stations display will sleep, but all other clients won't.
http://technet.microsoft.com/en-us/library/dn690048.aspx
Per this technet article it sounds like I would need to enable the SessionIdleTimeout regkey to disconnect the idle sessions. I have enabled this key, but it does not appear to be doing anything on my multipoint server.
I guess my question is does anyone with USB attached zero clients have display sleep working in some fashion?

Windows Multipoint Server is not a supported platform at this time. See http://www.novell.com/support/kb/doc.php?id=7006589.
Thanks,
Earle Wells
Novell Technical Services
>>> n7hansen<[email protected]> 6/6/2013 2:16 PM >>>
We have installed the Client 2 SP3 (IR2) on Windows Multipoint Server
2012. On startup the error "The domain name is not valid. Please try
again" appears. If we click past this error the windows login screen
appears. If you click on the icon of the most recent user the user name
WmsShell appears along with a populated password field. If you press
enter the WmsShell account logs in without problems and the multipoint
server continues to log in and the Novell login screen appears and users
can log in without any problem.
The issue we are having is that the WmsShell account should be logging
in automatically without any intervention. If we uninstall the client
the Multipoint Server logs in correctly but after installing the client
again it comes back. The only thing I can find is this TID 7008643. A
new release of the client seemed to take care of that issue.
https://www.novell.com/support/kb/doc.php?id=7008643
Any suggestions would be appreciated.
n7hansen
n7hansen's Profile: http://forums.novell.com/member.php?userid=138722
View this thread: http://forums.novell.com/showthread.php?t=467330

Windows Multipoint Server Station Connection Issue

I'm trying to join our Windows Multipoint Server (2012 Premium) to our domain. After joining the server to our domain and restarting the server, I receive the following message when the primary station begins to load.
The station is attempting to connect to localhost.
Press the ESC key to switch to console mode
The connection failed with the following error:
The remote computer requires Network Level Authentication, which your computer does not support. For assistance, contact your system administrator or technical support.
Error code: 0xB09:0x0.
We have some of the Dell Wyse E02 Zero Client on the way, not sure if these will experience the same issue. I would assume so since its related to Network Level Authentication.
NOTE: Our Domain Controllers are configured as follows within Local Security Setting.
Send NTLMv2 response only. Refuse LM & NTLM
Any insight into possible resolutions is greatly appreciated.
Jeremy

After trying to reconfigure WMS using "C:\Program Files\Windows MultiPoint Server\ConfigWiz.exe", I got this error messages:
... [3252] 120125.140554.3759: Microsoft_Windows_WMS: Executing cmdlet: import-module "C:\Program Files\Windows MultiPoint Server\\WmsCmdlets.dll"
[3252] 120125.140555.2579: Microsoft_Windows_WMS: MultipointOOBE::EnableRemotingError: An error occurred when enabling local machine remoting. The exception is System.Runtime.InteropServices.COMException (0x800706BE): Creating
an instance of the COM component with CLSID {52F39D44-BF76-469A-8DF3-B60E16F1338A} from the IClassFactory failed due to the following error: 800706be.
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdlet(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdletWrapper(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.SetLocalMachineRemote(SecureString password, Boolean enabling)
at Microsoft.SharedComputing.UI.Oobe.App.RunOobeTasks().
[3252] 120125.140555.2889: Microsoft_Windows_WMS: MultiPointOOBE::BackgroundWorkerDoWork: OOBE tasks completed.
[3648] 120125.140555.3209: Microsoft_Windows_WMS: MultiPointOOBE::GoToNextPage: Go to FinishPage
how to solve this problem?

Multipoint Server 2012 and Safety Family Plan

I'm having issues installing Family Safety plan in my server Multipoint 2012 Premiun. I already installed .NET Framework 3.5 using the Server Manager but when I run the installation for Family Safety I get an error (no information about it) and it didn't
finish. Do you know what I'm missing? Thank you.

Hello,
multi posted http://social.technet.microsoft.com/Forums/windowsserver/en-US/faebd9b0-9539-4a6a-87fb-787661f9eeef/family-safety-and-windows-multipoint-server-2012-premiun?forum=winservergen
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Windows Multipoint Server CAL requirement

Hello,
I have to do an installation of Windows Multipoint Server 2011 Premium. By default it comes with 20 users access for Remote Desktop. My query is should I have CAL'S for first 20 users or is it free with base server licensing. And what if I have to add more
than 20 users for Remote Dekstop.
Thanks in advance.

Hello,
on the Microsoft Product Use Rights(PUR) is mentioned that for using Multipoint Server Premium, you Need MPS CALs+windows Server CALs.
only with this exceptions:
CALs are not required to access server software running a Web or HPC Workload.
CALs not required for access in a Physical OSE used solely for hosting and managing Virtual OSEs.
Windows MultiPoint Server 2012 Connector:
You may install and use the Windows Server 2012
MultiPoint Connector software on any device that is licensed to access Windows Server 2012. You may use this software only to access the MultiPoint Server software.
If you access the server software from this device solely to use the MultiPoint Dashboard you do not need a MultiPoint Server CAL.
thanks
diramoh

RemoteFX issue when running Multipoint Server 2012 Premium as VM on Hyper-V

I have a server setup running Hyper-V 2012. I made a Multipoint 2012 Premium VM and added RemoteFX. After installing I went to Device Manager on the VM and noticed that the display adapter was showing as Microsoft Basic Display Adapter and
there was an unknown device which I assume is the RemoteFX 3D adapter. I updated the integration services and ran Windows Updates, but still cannot get RemoteFX to show up properly in the VM.
Does Windows Multipoint Server 2012 not support RemoteFX when running as a VM? I can't really run this on bare metal since I am looking at supporting more than 20 stations and therefore would need to run multiple instances virtualized on
the same server running Hyper-V.

The server I have setup for this test is a Dell R720 and the video card is an AMD FirePro S7000. I am using the latest stable AMD FirePro driver (ver. 13.352.1006.1001).
I also went ahead and setup a Dell OptiPlex 7010 with an AMD Radeon 5450 (which is DirectX11). I setup Server 2012 Hyper-V and again with Server 2012 R2 Hyper-V. Both times I was unable to add the RemoteFX 3D adapter. I am beginning to
think that it is not possible.
Are you running Multipoint 2012 server virtualized on top of Hyper-V with RemoteFX enabled in the virtualized server (and showing so in Device Manager)?

Activating/changing Multipoint server 2012 from evaluation to licensed

Hi
Could you please help in how to activate or change the Windows Multipoint server 2012 from evaluation to licensed one?
Below URL is for Windows server 2012, is this the same steps i need to follow?
http://technet.microsoft.com/en-us/library/jj574204.aspx
Thanks for your help!!

according to this you should be able to
http://technet.microsoft.com/en-us/library/dn303416.aspx
Upgrade means
moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You can upgrade from an evaluation version
of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

How can I work without a keyboard on a touch based station in windows multipoint server?

I am using Windows Multipoint Server 2012 Premium evaluation version. How can I work on a station, with integrated touch feature, without a keyboard?
In the beginning itself the station is stuck at "Creating a multipoint server station. Press 'C'". Now, since I a want all interactions on this station to be touch based, I have not provided any keyboard to press 'C' there. How can I login and
operate this station?
Thanks in advance.

No, an ipod can only sync with one computer at a time. You could buy the songs on both laptops using the same apple id, but you can only sync with one of the laptops.

Unable to assign Wyse E02 Zero Client in Microsoft Multipoint Server 2012

Hi
I am implementing and lab classroom for 20 client to be connected on 2 HP Z230 workstation with Core i7, 16 GB RAM, 1 TB HDD. It will be 10 clients on each workstation.
Everything is connected to a HP switch.
I have sucesfull installed the Muitipoint Server 2012 and it is fully updated with latest Microsoft updates.
I have also installed the Wyse E02 driver on the server so that I can view the station on Multipoint manager.
On the "Network stations" tab, I checked the box from the specific client and click on "Assign to this server". While processing I get the following error:
Client Name: Network Zero Client
IP: x.x.x.x
MAC: xx:xx:xx:xx:xx:xx
The network is busy. Please try again later.
Thanks in advance for the support helping me to solve this issue.
Regards.
Muhammad A. Ismail

So, my Wyse E02 eventually showed up in Multipoint Manager and I was able to assign it to the sever but it appears to constantly connect and disconnect. Most of the time now the client just shows the black screen stating "Waiting for assigned host.
Ensure the assigned PC is running Windows Multipoint Server in station mode." Then I will see it disconnect and the screen will go to sleep and then will come back a few seconds later when MP Manager shows it reconnect.
My Hyper-V server (which Multipoint Server is running on as a guest VM) is in the datacenter and my thin client is in my office for testing purposes. I have them in the same vlan. Is this not a supported configuration? For a quick
test I setup the Multipoint Server trial on a standalone OptiPlex and connected the Wyse terminal to the same 5 port Linksys switch and everything worked fine.

Windows storage server 2012 share not connecting by share name but connecting thru IP address from windows XP machines

We have a windows storage server 2012 (HP storage server) in our domain. All of sudden We had a issue, connecting the server shares using the share name only from XP machines, but it is connecting through IP address with a delayed response. We are getting
the below error message from all the windows XP SP2 machines in our domain.
"\\<share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have a access permissions.
Login Failure: The target account name is incorrect."
But it is connecting while we are trying from windows 7 machines. Also the other server shares (Windows 2003 server) are connecting without any issues using the share name. In addition to this we gave everyone permission for this share. And it worked
well before but not now. Could you please suggest any solution for this complex issue?
Thanks,
UdayaKumar S

Hi,
We are getting the below critical alert mail often from our storage server. This could be the problem?
vent from Blade NODE01.*****.com, In Enclosure: EM-E83935ED70F6, Network Interface Lost Connectivity.
Description: "A network interface has failed. An Ethernet adapter's status changed from OK to Error, or an Ethernet team's status changed to Error from another state."
Source: CIM Indication from CSP Provider
Date: 02-06-2014 Time: 18:52:26
Blade: NODE01.****.com
NetworkAddresses:
Severity is Critical
Recommended Actions: Check the network cables, switches, and hubs for the cause of the failure.
Note: For More information please refer the Windows System Logs in the Event Viewer

Is it possible to set up parental control in MultiPoint Server 2012?

Hello everyone!
Is it possible to set up parental control in MultiPoint Server 2012. I'd like to filter adult web sites.
Kind regards,
Pavel

I found an issue with Multipoint Dashboard that when student select to signout and then select "Cancel" to signout to go back to the session, the Multipoint Dashboard filtering is no longer applied to the session.
here is the scenario -
- Student login to the Multipoint server using the end point device as an standard user.
- The Multipoint Dashboard has the configuration to "limit the website to all desktop". "cnn.com" only
- The student session, limits the use of the web browser to only to cnn.com - this is working.
- Studen open an app like notepad - click save --> prompted him to where to save the file.
do not save the file. leave the "Save as" windows open.
- Click Start (left bottom corner)
- Click the account’s name on the top right corner, Click Sign Out
- It will prompt you with a warning that there is a file open and needs to be saved
- "Signout anyway" or "Cancel"
- student select to "Cancel"
- He is now back to the session
This will allow the student/account logged in to bypass the web filtering

IOMeter hangs when running to a NFS share from Windows Storage Server 2012

Hello,
I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
Thanks in advance,
BJ

I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
1) Can you use NFS share with NFS clients normally? I mean is it I/O Meter who has issues with streaming or do other apps have similar problems? Say normal copy to / from NFS share?
2) What error exactly is popped up? Do you happen to have a screenshot?
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Windows multipoint server 2012 wmsShell error

Similar Messages

Maybe you are looking for