Windows Multipoint Server CAL requirement

Hello,
I have to do an installation of Windows Multipoint Server 2011 Premium. By default it comes with 20 users access for Remote Desktop. My query is should I have CAL'S for first 20 users or is it free with base server licensing. And what if I have to add more
than 20 users for Remote Dekstop.
Thanks in advance.

Hello,
on the Microsoft Product Use Rights(PUR) is mentioned that for using Multipoint Server Premium, you Need MPS CALs+windows Server CALs.
only with this exceptions:
CALs are not required to access server software running a Web or HPC Workload.
CALs not required for access in a Physical OSE used solely for hosting and managing Virtual OSEs.
Windows MultiPoint Server 2012 Connector:
You may install and use the Windows Server 2012
MultiPoint Connector software on any device that is licensed to access Windows Server 2012. You may use this software only to access the MultiPoint Server software.
If you access the server software from this device solely to use the MultiPoint Dashboard you do not need a MultiPoint Server CAL.
 thanks
diramoh

Similar Messages

  • Windows Multipoint Server Station Connection Issue

    I'm trying to join our Windows Multipoint Server (2012 Premium) to our domain.  After joining the server to our domain and restarting the server, I receive the following message when the primary station begins to load.
    The station is attempting to connect to localhost.
    Press the ESC key to switch to console mode
    The connection failed with the following error:
    The remote computer requires Network Level Authentication, which your computer does not support.  For assistance, contact your system administrator or technical support.
    Error code: 0xB09:0x0.
    We have some of the Dell Wyse E02 Zero Client on the way, not sure if these will experience the same issue.  I would assume so since its related to Network Level Authentication.
    NOTE: Our Domain Controllers are configured as follows within Local Security Setting.
    Send NTLMv2 response only. Refuse LM & NTLM
    Any insight into possible resolutions is greatly appreciated.
    Jeremy

    After trying to reconfigure WMS using "C:\Program Files\Windows MultiPoint Server\ConfigWiz.exe", I got this error messages:
    ... [3252] 120125.140554.3759: Microsoft_Windows_WMS: Executing cmdlet: import-module "C:\Program Files\Windows MultiPoint Server\\WmsCmdlets.dll"
    [3252] 120125.140555.2579: Microsoft_Windows_WMS: MultipointOOBE::EnableRemotingError: An error occurred when enabling local machine remoting. The exception is System.Runtime.InteropServices.COMException (0x800706BE): Creating
    an instance of the COM component with CLSID {52F39D44-BF76-469A-8DF3-B60E16F1338A} from the IClassFactory failed due to the following error: 800706be.
    at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdlet(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
    at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdletWrapper(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
    at Microsoft.SharedComputing.Setup.SystemManagement.SetLocalMachineRemote(SecureString password, Boolean enabling)
    at Microsoft.SharedComputing.UI.Oobe.App.RunOobeTasks().
    [3252] 120125.140555.2889: Microsoft_Windows_WMS: MultiPointOOBE::BackgroundWorkerDoWork: OOBE tasks completed.
    [3648] 120125.140555.3209: Microsoft_Windows_WMS: MultiPointOOBE::GoToNextPage: Go to FinishPage
    how to solve this problem?

  • Installation of CS6 Web & Design Premium in Windows Multipoint Server 2011

    Hi all,
    I am trying to install CS6 Web & Design Premium in Windows Multipoint Server 2011.
    But I am always getting the PDApp.exe crash message and can't even get into the installation wizard.
    Can anyone help me in resolving this problem?
    Actually I have tried to install it in normal mode or maintenance mode with UAC switched off already.
    In addition to this, can CS6 Web & Design Premium support Windows Multipoint Server 2011?
    The information for PDApp.exe crash is listed as follow:
    問題簽章:
      問題事件名稱:          APPCRASH
      應用程式名稱:          PDApp.exe
      應用程式版本:          7.0.0.189
      應用程式時間戳記:          50c9a261
      錯誤模組名稱:          KERNELBASE.dll
      錯誤模組版本:          6.1.7601.18015
      錯誤模組時間戳記:          50b83c8a
      例外狀況代碼:          000006ba
      例外狀況位移:          0000c41f
      作業系統版本:          6.1.7601.2.1.0.16.56
      地區設定識別碼:          3076
      其他資訊 1:          95cf
      其他資訊 2:          95cffe8a8dd0881229d8c1aa042bcd57
      其他資訊 3:          6a3c
      其他資訊 4:          6a3c6b3c38ebfac38d8be3e4a483fbe3
    閱讀我們的線上隱私權聲明:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c04
    Please let me know if more information is needed and I am willing to provide any information you need.
    Thanks very much for all your help. Really thanks!
    John

    Desktop products are generally not supported on server operating systems. That's all you will ever hear about the matter. That being so, you shouldn't expect anyone to have any answers for you. It's simply an exotic scenario and very few people, if any at all, will even have bothered to try.
    Mylenium

  • Firefox will not run for mulitple instances of the SAME user account on Windows Multipoint Server 2011

    We have an HP MS6200 MulitSeat PC
    It is running Microsoft Windows MultiPoint Server 2011 (which appears to be a tweaked version of Windows 7)
    It is set up in a computer lab, and students log in using their shared room account - ie multiple instances of the same user accounts are running on the PC at the same time.
    The first student to run Firefox can work with it without problem.
    However when another student tries to start firefox they get the following message:
    Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Thanks for the quick reply.
    I managed to get this to work by using:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -profile "%temp%\ffprof" -no-remote
    This works because Windows assigns a different temp location for each instance of a user
    Thanks for your help

  • How can I work without a keyboard on a touch based station in windows multipoint server?

    I am using Windows Multipoint Server 2012 Premium evaluation version. How can I work on a station, with integrated touch feature, without a keyboard?
    In the beginning itself the station is stuck at "Creating a multipoint server station. Press 'C'". Now, since I a want all interactions on this station to be touch based, I have not provided any keyboard to press 'C' there. How can I login and
    operate this station?
    Thanks in advance.

    No, an ipod can only sync with one computer at a time. You could buy the songs on both laptops using the same apple id, but you can only sync with one of the laptops.

  • Question about Windows MultiPoint Server with VNC

    Hello,
    I work in a research lab and our scientists run a lot of image processing simulations with MATLAB.  We were wondering about purchasing a single powerful workstation computer and setting it up such that up to 3 to 4 users could access the computer
    remotely at any time and run simulations using the shared resources, but without interfering with each others'  sessions.  I just wanted to make sure that this was feasible and clarify how to go about setting it up.  I'm guessing I would install
    Windows MultiPoint Server on the computer, create 3 to 4 log on instances or users with unique IPs, install MATLAB and a VNC client for each instance, and then users would be able to log onto each instance as if they were independent computers? Finally, is
    there any way for Windows to automatically allocate remote users to unused instances--for example, if I try to connect to an instance, Windows will automatically assign me to the next free instance?
    Thanks!
    Michael

    After trying to reconfigure WMS using "C:\Program Files\Windows MultiPoint Server\ConfigWiz.exe", I got this error messages:
    ... [3252] 120125.140554.3759: Microsoft_Windows_WMS: Executing cmdlet: import-module "C:\Program Files\Windows MultiPoint Server\\WmsCmdlets.dll"
    [3252] 120125.140555.2579: Microsoft_Windows_WMS: MultipointOOBE::EnableRemotingError: An error occurred when enabling local machine remoting. The exception is System.Runtime.InteropServices.COMException (0x800706BE): Creating
    an instance of the COM component with CLSID {52F39D44-BF76-469A-8DF3-B60E16F1338A} from the IClassFactory failed due to the following error: 800706be.
    at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdlet(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
    at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdletWrapper(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
    at Microsoft.SharedComputing.Setup.SystemManagement.SetLocalMachineRemote(SecureString password, Boolean enabling)
    at Microsoft.SharedComputing.UI.Oobe.App.RunOobeTasks().
    [3252] 120125.140555.2889: Microsoft_Windows_WMS: MultiPointOOBE::BackgroundWorkerDoWork: OOBE tasks completed.
    [3648] 120125.140555.3209: Microsoft_Windows_WMS: MultiPointOOBE::GoToNextPage: Go to FinishPage
    how to solve this problem?

  • Windows multipoint server 2012 wmsShell error

    I'm using windows multipoint server 2012 premium and i have connected 16 nos of Atrust m320 zero client, it was working fine for 1 month, but now it has some problem. when i switch on my server after windows boot i'm not getting login screen and it is directly
    login to wmsShell user, same time keyboard mouse not detecting and clients are not connecting to server. Please give me some solution.
    click on below link to see the problem
    https://www.youtube.com/watch?v=N36zOBndfPs&feature=youtu.be

    I have the same problem when Microsoft Updates are installed that after the reboot it automatically logs into the WmShell account and displays the My Documents folder of WmShell. 
    I resolved the issue by exiting the Document Folder, doing a CTRL+ALT+DEL, signing out of the WmShell account, and logging back in as Administrator > Local Machine name.
    Once in go to Control Panel > User Accounts and delete all references to wm???????
    Reboot the server and it should come back into normal client mode.

  • HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c

    HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c 

    Hello Ashok007,
    I'm not understanding this post. Is there a question here somewhere? Are you having a problem or experiencing an issue?
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • What kind of anti-virus software works with Windows Multipoint Server 2012?

    Is there any certified anti-virus software for Multipoint server 2012?

    You can use ie one of these
    System Center EndPoint Protection
    ESET Antivirus
    McAfee VirusScan Enterprise
    Symantec Protection Suite

  • Windows Multipoint Server 2012 black screen - screensaver pops up frequently

    Hi,
    After install WMS 2012 and patch WMS-KB2791647-ENU-x64, all hardware drivers and patches, the system ran well for 2 days, but then the screen
    saver pops up frequently with visible mouse pointer.
    When
    the screen saver pops up and I move
    the mouse, the desktop near the mouse appears but soon the screen switches from desktop to screen saver. Please check the video below:
    https://onedrive.live.com/embed?cid=3DF42D4FE0756054&resid=3DF42D4FE0756054%21219&authkey=AEpUbFn6Q_ngTWM
    The issue is gone in safe mode.
    Disabling screensaver doesn't work.
    The graphic card is Nvidia Q600, with latest driver.

    Can you provide more information about the setup you have for your server? Specifically whether or not it is domain joined or not and whether there are any specific policies that might have changed to trigger the behavior? Also, the information about the
    number of users, types of user (domain/local), the types of station (USB direct connect, thin clients, zero clients, etc.) would be helpful.

  • Display Drivers for intel (R) G45 express chipset on windows 8(multipoint server 2012) 64 bit

    HI
    I recently bought windows multipoint server 2012 from Microsoft which comes with windows 8. I am having trouble with installing display drivers from my computer's manufacturer. The display device is  Intel (R) G45 express chipset. Intel only supports
    windows 7 and when I try to troubleshoot it's compatibility,  the driver still does not work. I get an error notifying me that my computer does not meet the minimum requirements. My computer system is 64 bit and the drivers I download are meant
    for 64 bit systems,  I am currently using Microsoft basic display adapter and when I try to automatically update the driver it says that the drivers are up to date 
    why do I get the error that my computer does not meet the minimum requirements?
    and what can I do to get the drivers working on windows 8? 
    PLEASE HELP
    THANK YOU IN ADVANCE

    I had the most up-to-date Intel driver installed, as far as Windows can determine (right click Intel display adapter -> update drivers, search automatically). I was also using that exact download you linked me to.
    I also tried switching my graphics card to dedicated discrete mode in BIOS, which made my device ID change, but it too was not supported. I have since managed to reinstall the old drivers from 2010.
    Is there some place I can go to download a more recent version of the Intel drivers than Windows can find automatically?

  • How to install Windows Movie Maker in Multipoint Server 2011

    I need to know how to install Movie Maker in Windows Multipoint Server 2011 ? Thanks in advance.
    Dileepa S. Rajapaksa
    Trainee Developer
    Microsoft, Sri Lanka
    Twitter : @dsrajapaksa
    Blog : http://www.dileepatech.net

    Hi
    When you run the setup file what happens?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • How to disable windows protection on multipoint server?

    Hi!
    I'm trying to install some software on windows multipoint server 2011 (single workstation with six stations). The application woudn't start at all. The system gives a standard windows mesage error with two optinos: stop app or try to find a solution online.
    On windows 7 with antivirus software, when trying to copy files from DVD to hard drive, file like install.exe is been deleted with mesage that it is "susspicious". But when I disable it, software is instaled perfectly.
    So, I'm not sure if the software has some certificate problem...or whatever.. It is not a virus.
    I just want to install it.
    How I'm going to disable windows server protection? Or, what should I do?

    There should be link with Install anyway option located in right bottom corner. Can you post a screenshot? Did you try to install it with admin privilages?

  • Blue Screen of Death of multiple Windows Multipoint Servers at the same time in NUServer64.sys

    Hi, we are running
    Windows MultiPoint Server 2011 on 4 Dell 9010 machines and 45 Wyse E02 clients connected by 4 switches. Every week we got 2 or 3 random BSoD for all servers at the same time. Memory dump for server 2,3,4 show that the exception is from NUServer64.sys.
    Please check below for the system event logs and memory dump analysis output.  Any help would be appreciated!
    server1:
    Warning 11/17/2013 8:55:52 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:48 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:56:08 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000001e (0xffffffffc0000005, 0x0000000000000000, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-19765-01.
    Error 11/17/2013 8:56:03 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:40 on 2013/11/18 was unexpected.
    Error 11/17/2013 6:55:49 PM
    Disk 11
    None
    The driver detected a controller error on \Device\Harddisk2\DR2.
    Error 11/17/2013 6:55:48 PM
    Disk 11
    None
    The driver detected a controller error on \Device\Harddisk2\DR2.
    Warning 11/17/2013 3:42:08 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    server2:
    Warning 11/17/2013 8:55:39 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:31 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:52 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff80002c80166, 0xfffff880023397e8, 0xfffff88002339040). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-17518-01.
    Error 11/17/2013 8:55:44 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:53 on 2013/11/18 was unexpected.
    Warning 11/17/2013 7:16:07 PM
    NUServer64 3
    None
    server3:
    Warning 11/17/2013 8:55:38 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    Error 11/17/2013 8:55:31 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000004e (0x000000000000009a, 0x0000000000417c94, 0x0000000000000006, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-9937-01.
    Warning 11/17/2013 8:55:24 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:21 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:27 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:49 on 2013/11/18 was unexpected.
    server4:
    Warning 11/17/2013 8:55:33 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    Warning 11/17/2013 8:55:09 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:05 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:25 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000000a (0x0000000100000001, 0x0000000000000002, 0x0000000000000001, 0xfffff8000328abe6). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-14055-01.
    Error 11/17/2013 8:55:14 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:21 on 2013/11/18 was unexpected.
    Error 11/17/2013 8:51:47 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Disconnect fail. 
    Error 11/17/2013 8:51:47 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Connect fail. 
    Warning 11/17/2013 8:51:47 PM
    NUServer64 3
    None
    \Device\NUServer_995D6600 
       <995D6600_3> Connect time-out. 
    Warning 11/17/2013 8:50:00 PM
    NUServer64 3
    None
     \Device\NUServer_995B9000 
       <995B9000_3> Hi-Perf socket active clear. 
    Error 11/17/2013 8:49:25 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Disconnect fail. 
    Error 11/17/2013 8:49:25 PM
    NUServer64 4
    None
    \Device\NUServer_995D6600 
       <995D6600_3> Connect fail. 
    Warning 11/17/2013 8:49:25 PM
    NUServer64 3
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Connect time-out. 

    Memory dumps:
    server1:
    2: kd> !analyze -v 
    *                        Bugcheck Analysis                                    *
    KMODE_EXCEPTION_NOT_HANDLED (1e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: 0000000000000000, The address that the exception occurred at
    Arg3: 0000000000000008, Parameter 0 of the exception
    Arg4: 0000000000000000, Parameter 1 of the exception
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP: 
    +3031623733386137
    00000000`00000000 ??              ???
    EXCEPTION_PARAMETER1:  0000000000000008
    EXCEPTION_PARAMETER2:  0000000000000000
    WRITE_ADDRESS:  0000000000000000 
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    BUGCHECK_STR:  0x1E_c0000005
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    TRAP_FRAME:  fffff8800c744860 -- (.trap 0xfffff8800c744860)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=0000000000000000 rsp=fffff8800c7449f0 rbp=0000000000000000
     r8=0000000000000000  r9=0000000000000f44 r10=fffff80003602000
    r11=0000000000000358 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe nc
    00000000`00000000 ??              ???
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff800036c2738 to fffff80003677bc0
    STACK_TEXT:  
    fffff880`0c743fd8 fffff800`036c2738 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
    fffff880`0c743fe0 fffff800`03677242 : fffff880`0c7447b8 00000000`00000030 fffff880`0c744860 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x487ed
    fffff880`0c744680 fffff800`03675dba : 00000000`00000008 00000000`00000000 00000009`00000000 00000000`00000030 : nt!KiExceptionDispatch+0xc2
    fffff880`0c744860 00000000`00000000 : 00000000`00000030 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    nt! ?? ::FNODOBFM::`string'+487ed
    fffff800`036c2738 cc              int     3
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+487ed
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  521ea035
    FAILURE_BUCKET_ID:  X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
    BUCKET_ID:  X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
    Followup: MachineOwner
    server2:
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: fffff80002c80166, The address that the exception occurred at
    Arg3: fffff880023397e8, Exception Record Address
    Arg4: fffff88002339040, Context Record Address
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP: 
    nt!KeSetEvent+16
    fffff800`02c80166 f6037f          test    byte ptr [rbx],7Fh
    EXCEPTION_RECORD:  fffff880023397e8 -- (.exr 0xfffff880023397e8)
    ExceptionAddress: fffff80002c80166 (nt!KeSetEvent+0x0000000000000016)
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000000
       Parameter[1]: 000000010f7f0a50
    Attempt to read from address 000000010f7f0a50
    CONTEXT:  fffff88002339040 -- (.cxr 0xfffff88002339040)
    rax=0000000000000000 rbx=000000010f7f0a50 rcx=0000000000000001
    rdx=0000000000000000 rsi=fffffa800f7ec050 rdi=fffffa800f7ec1a0
    rip=fffff80002c80166 rsp=fffff88002339a20 rbp=000000010f7f0a50
     r8=0000000000000000  r9=0000000000000150 r10=fffff80002c06000
    r11=fffff88002339a30 r12=0000000000000000 r13=fffffa800de82220
    r14=fffffa800f7f0ae0 r15=0000000000000002
    iopl=0         nv up ei ng nz na pe nc
    cs=0010  ss=0000  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
    nt!KeSetEvent+0x16:
    fffff800`02c80166 f6037f          test    byte ptr [rbx],7Fh ds:002b:00000001`0f7f0a50=??
    Resetting default scope
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    EXCEPTION_PARAMETER1:  0000000000000000
    EXCEPTION_PARAMETER2:  000000010f7f0a50
    READ_ADDRESS:  000000010f7f0a50 
    FOLLOWUP_IP: 
    NUServer64+65f1
    fffff880`0ab8c5f1 488b6c2448      mov     rbp,qword ptr [rsp+48h]
    BUGCHECK_STR:  0x7E
    LAST_CONTROL_TRANSFER:  from fffff8800ab8c5f1 to fffff80002c80166
    STACK_TEXT:  
    fffff880`02339a20 fffff880`0ab8c5f1 : 00000000`000003f0 00000001`00000000 fffffa80`0f7ec000 00000000`00000500 : nt!KeSetEvent+0x16
    fffff880`02339a90 fffff880`0ab8c8aa : fffffa80`0f7ec1a0 fffffa80`0f7eeb0c fffffa80`0f7ee2c8 00000000`00000002 : NUServer64+0x65f1
    fffff880`02339ad0 fffff800`02f721d3 : fffffa80`0f7f0ae0 fffffa80`0f7ec260 fffffa80`0f7ec050 fffffa80`0c72e040 : NUServer64+0x68aa
    fffff880`02339b40 fffff800`02c85261 : fffff800`02e21200 fffff800`02f72101 fffffa80`0c72e000 00000000`00000000 : nt!IopProcessWorkItem+0x23
    fffff880`02339b70 fffff800`02f182ea : 501a7d4d`a14dcd79 fffffa80`0c72e040 00000000`00000080 fffffa80`0c70b6f0 : nt!ExpWorkerThread+0x111
    fffff880`02339c00 fffff800`02c6c8e6 : fffff880`01f42180 fffffa80`0c72e040 fffff880`01f4d0c0 9ae0ec34`00b81aae : nt!PspSystemThreadStartup+0x5a
    fffff880`02339c40 00000000`00000000 : fffff880`0233a000 fffff880`02334000 fffff880`02339370 00000000`00000000 : nt!KiStartSystemThread+0x16
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  NUServer64+65f1
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NUServer64
    IMAGE_NAME:  NUServer64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4f66a064
    STACK_COMMAND:  .cxr 0xfffff88002339040 ; kb
    FAILURE_BUCKET_ID:  X64_0x7E_NUServer64+65f1
    BUCKET_ID:  X64_0x7E_NUServer64+65f1
    Followup: MachineOwner
    server3:
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    PFN_LIST_CORRUPT (4e)
    Typically caused by drivers passing bad memory descriptor lists (ie: calling
    MmUnlockPages twice with the same list, etc).  If a kernel debugger is
    available get the stack trace.
    Arguments:
    Arg1: 000000000000009a, 
    Arg2: 0000000000417c94
    Arg3: 0000000000000006
    Arg4: 0000000000000002
    Debugging Details:
    BUGCHECK_STR:  0x4E_9a
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    LAST_CONTROL_TRANSFER:  from fffff80002d629ef to fffff80002cd3bc0
    STACK_TEXT:  
    fffff880`14417968 fffff800`02d629ef : 00000000`0000004e 00000000`0000009a 00000000`00417c94 00000000`00000006 : nt!KeBugCheckEx
    fffff880`14417970 fffff800`02e0403b : fffff880`14417a08 fffffa80`10cd1b88 fffff880`144179e0 00000000`000005a0 : nt!MiBadRefCount+0x4f
    fffff880`144179b0 fffff800`02e078a7 : fffffa80`12894000 00000000`00000000 fffff6fb`7ea004a0 fffff800`00000001 : nt!MiFreePoolPages+0xa8b
    fffff880`14417ac0 fffff880`0ad8d07a : 00000000`00000003 fffffa80`0f4471a0 fffffa80`36747345 fffffa80`00000000 : nt!ExFreePoolWithTag+0x7c7
    fffff880`14417b70 fffff800`02f702ea : fffffa80`10cd1a80 00000000`00000080 fffffa80`0c70a740 003f005c`005c0000 : NUServer64+0x1707a
    fffff880`14417c00 fffff800`02cc48e6 : fffff800`02e4ee80 fffffa80`10cd1a80 fffff800`02e5ccc0 00310026`00330023 : nt!PspSystemThreadStartup+0x5a
    fffff880`14417c40 00000000`00000000 : fffff880`14418000 fffff880`14412000 fffff880`144174b0 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    NUServer64+1707a
    fffff880`0ad8d07a 440f20c0        mov     rax,cr8
    SYMBOL_STACK_INDEX:  4
    SYMBOL_NAME:  NUServer64+1707a
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NUServer64
    IMAGE_NAME:  NUServer64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4f66a064
    FAILURE_BUCKET_ID:  X64_0x4E_9a_NUServer64+1707a
    BUCKET_ID:  X64_0x4E_9a_NUServer64+1707a
    Followup: MachineOwner

  • Multipoint Server 2012 - Display Sleep

    I have several WMS 2012 boxes with Atrust m300 zero clients. I am having an issue since upgrading from WMS 2011 that my zero clients displays don't sleep. The direct connected ps/2 stations display will sleep, but all other clients won't.
    http://technet.microsoft.com/en-us/library/dn690048.aspx
    Per this technet article it sounds like I would need to enable the SessionIdleTimeout regkey to disconnect the idle sessions. I have enabled this key, but it does not appear to be doing anything on my multipoint server. 
    I guess my question is does anyone with USB attached zero clients have display sleep working in some fashion?

    Windows Multipoint Server is not a supported platform at this time. See http://www.novell.com/support/kb/doc.php?id=7006589.
    Thanks,
    Earle Wells
    Novell Technical Services
    >>> n7hansen<[email protected]> 6/6/2013 2:16 PM >>>
    We have installed the Client 2 SP3 (IR2) on Windows Multipoint Server
    2012. On startup the error "The domain name is not valid. Please try
    again" appears. If we click past this error the windows login screen
    appears. If you click on the icon of the most recent user the user name
    WmsShell appears along with a populated password field. If you press
    enter the WmsShell account logs in without problems and the multipoint
    server continues to log in and the Novell login screen appears and users
    can log in without any problem.
    The issue we are having is that the WmsShell account should be logging
    in automatically without any intervention. If we uninstall the client
    the Multipoint Server logs in correctly but after installing the client
    again it comes back. The only thing I can find is this TID 7008643. A
    new release of the client seemed to take care of that issue.
    https://www.novell.com/support/kb/doc.php?id=7008643
    Any suggestions would be appreciated.
    n7hansen
    n7hansen's Profile: http://forums.novell.com/member.php?userid=138722
    View this thread: http://forums.novell.com/showthread.php?t=467330

Maybe you are looking for