Windows Multipoint Server Station Connection Issue

I'm trying to join our Windows Multipoint Server (2012 Premium) to our domain. After joining the server to our domain and restarting the server, I receive the following message when the primary station begins to load.
The station is attempting to connect to localhost.
Press the ESC key to switch to console mode
The connection failed with the following error:
The remote computer requires Network Level Authentication, which your computer does not support. For assistance, contact your system administrator or technical support.
Error code: 0xB09:0x0.
We have some of the Dell Wyse E02 Zero Client on the way, not sure if these will experience the same issue. I would assume so since its related to Network Level Authentication.
NOTE: Our Domain Controllers are configured as follows within Local Security Setting.
Send NTLMv2 response only. Refuse LM & NTLM
Any insight into possible resolutions is greatly appreciated.
Jeremy

After trying to reconfigure WMS using "C:\Program Files\Windows MultiPoint Server\ConfigWiz.exe", I got this error messages:
... [3252] 120125.140554.3759: Microsoft_Windows_WMS: Executing cmdlet: import-module "C:\Program Files\Windows MultiPoint Server\\WmsCmdlets.dll"
[3252] 120125.140555.2579: Microsoft_Windows_WMS: MultipointOOBE::EnableRemotingError: An error occurred when enabling local machine remoting. The exception is System.Runtime.InteropServices.COMException (0x800706BE): Creating
an instance of the COM component with CLSID {52F39D44-BF76-469A-8DF3-B60E16F1338A} from the IClassFactory failed due to the following error: 800706be.
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdlet(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdletWrapper(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.SetLocalMachineRemote(SecureString password, Boolean enabling)
at Microsoft.SharedComputing.UI.Oobe.App.RunOobeTasks().
[3252] 120125.140555.2889: Microsoft_Windows_WMS: MultiPointOOBE::BackgroundWorkerDoWork: OOBE tasks completed.
[3648] 120125.140555.3209: Microsoft_Windows_WMS: MultiPointOOBE::GoToNextPage: Go to FinishPage
how to solve this problem?

Similar Messages

How can I work without a keyboard on a touch based station in windows multipoint server?

I am using Windows Multipoint Server 2012 Premium evaluation version. How can I work on a station, with integrated touch feature, without a keyboard?
In the beginning itself the station is stuck at "Creating a multipoint server station. Press 'C'". Now, since I a want all interactions on this station to be touch based, I have not provided any keyboard to press 'C' there. How can I login and
operate this station?
Thanks in advance.

No, an ipod can only sync with one computer at a time. You could buy the songs on both laptops using the same apple id, but you can only sync with one of the laptops.

Windows multipoint server 2012 wmsShell error

I'm using windows multipoint server 2012 premium and i have connected 16 nos of Atrust m320 zero client, it was working fine for 1 month, but now it has some problem. when i switch on my server after windows boot i'm not getting login screen and it is directly
login to wmsShell user, same time keyboard mouse not detecting and clients are not connecting to server. Please give me some solution.
click on below link to see the problem
https://www.youtube.com/watch?v=N36zOBndfPs&feature=youtu.be

I have the same problem when Microsoft Updates are installed that after the reboot it automatically logs into the WmShell account and displays the My Documents folder of WmShell.
I resolved the issue by exiting the Document Folder, doing a CTRL+ALT+DEL, signing out of the WmShell account, and logging back in as Administrator > Local Machine name.
Once in go to Control Panel > User Accounts and delete all references to wm???????
Reboot the server and it should come back into normal client mode.

Question about Windows MultiPoint Server with VNC

Hello,
I work in a research lab and our scientists run a lot of image processing simulations with MATLAB. We were wondering about purchasing a single powerful workstation computer and setting it up such that up to 3 to 4 users could access the computer
remotely at any time and run simulations using the shared resources, but without interfering with each others' sessions. I just wanted to make sure that this was feasible and clarify how to go about setting it up. I'm guessing I would install
Windows MultiPoint Server on the computer, create 3 to 4 log on instances or users with unique IPs, install MATLAB and a VNC client for each instance, and then users would be able to log onto each instance as if they were independent computers? Finally, is
there any way for Windows to automatically allocate remote users to unused instances--for example, if I try to connect to an instance, Windows will automatically assign me to the next free instance?
Thanks!
Michael

After trying to reconfigure WMS using "C:\Program Files\Windows MultiPoint Server\ConfigWiz.exe", I got this error messages:
... [3252] 120125.140554.3759: Microsoft_Windows_WMS: Executing cmdlet: import-module "C:\Program Files\Windows MultiPoint Server\\WmsCmdlets.dll"
[3252] 120125.140555.2579: Microsoft_Windows_WMS: MultipointOOBE::EnableRemotingError: An error occurred when enabling local machine remoting. The exception is System.Runtime.InteropServices.COMException (0x800706BE): Creating
an instance of the COM component with CLSID {52F39D44-BF76-469A-8DF3-B60E16F1338A} from the IClassFactory failed due to the following error: 800706be.
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdlet(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.ExecutePSCmdletWrapper(String cmdletName, Boolean importWMSCmdletModule, Boolean logCmdlet)
at Microsoft.SharedComputing.Setup.SystemManagement.SetLocalMachineRemote(SecureString password, Boolean enabling)
at Microsoft.SharedComputing.UI.Oobe.App.RunOobeTasks().
[3252] 120125.140555.2889: Microsoft_Windows_WMS: MultiPointOOBE::BackgroundWorkerDoWork: OOBE tasks completed.
[3648] 120125.140555.3209: Microsoft_Windows_WMS: MultiPointOOBE::GoToNextPage: Go to FinishPage
how to solve this problem?

HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c

HP Compaq MultiSeat ms6200 Desktop having windows multipoint server 2011 supports turbo c and c

Hello Ashok007,
I'm not understanding this post. Is there a question here somewhere? Are you having a problem or experiencing an issue?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Windows Mail - Server Terminating Connection when ...

This is a message related to a very well established forum full of many, many irate BT customers. I'm posting this long standing complaint here because in the forum I speak of, we are all being totally ignored by BT.
BT, after months of dissatisfaction, can you (a) acknowledge / confirm the problem and (b) fix the problem.
Here is the link to the forum in question - 8 pages worth of extremely dissatisfied and angry posters:
http://community.bt.com/t5/Other-BB-Queries/Windows-Mail-Server-Terminating-Connection-when-download...
If you don't take action, I (and many others, I'm sure) will go public on this issue.
At the end of the day, we don't want to continue paying for service that doesn't deliver!

To both people who replied to my post - I know only to well what forums are for but I'm so angry that all our posts in the forum (the one with 8 pages worth) just evapourate into thin air. You have to question the intrinsic value of at least some of these forums. I don't speak by any means for all forums but in ours we are all at our wits end - and furious because we are paying good money to BT for a "service" that doesn't deliver.
It's not good enough despite you correcting me as to where I should and shouldn't post. Have a look at the forum and you'll see what I mean. Yes - we have supported one another but we now all know exactly what the pronblem is after many months. The Sage has made around 4 posts all of which advocate we should all change to IMAP but this is missing the whole point. Our BT e-mail service is supposed to work through POP3 and indeed BT has standard POP3 settings for mail clients.
Myself and numerous people have been through all the official help and support channels to no avail. Customer Service is really poor. They tell you to follow a standard set of instructions by way of a "fix" but they refuse to recognise the issues we have.
But to finish, where do we all go from here when (a) many people have known for months what the issue is - it's a BT Yahoo server-side problem and (b) many people have reported this long standing issue (since Feb-12 or earlier) through the official BT support channels and still nothing has been done.
OK. No more posts from me. I'm at my wits end and both your replies have discouraged me from participating any longer. Very disappointing.

Installation of CS6 Web & Design Premium in Windows Multipoint Server 2011

Hi all,
I am trying to install CS6 Web & Design Premium in Windows Multipoint Server 2011.
But I am always getting the PDApp.exe crash message and can't even get into the installation wizard.
Can anyone help me in resolving this problem?
Actually I have tried to install it in normal mode or maintenance mode with UAC switched off already.
In addition to this, can CS6 Web & Design Premium support Windows Multipoint Server 2011?
The information for PDApp.exe crash is listed as follow:
問題簽章:
問題事件名稱:          APPCRASH
應用程式名稱:          PDApp.exe
應用程式版本:          7.0.0.189
應用程式時間戳記:          50c9a261
錯誤模組名稱:          KERNELBASE.dll
錯誤模組版本:          6.1.7601.18015
錯誤模組時間戳記:          50b83c8a
例外狀況代碼:          000006ba
例外狀況位移:          0000c41f
作業系統版本:          6.1.7601.2.1.0.16.56
地區設定識別碼:          3076
其他資訊 1:          95cf
其他資訊 2:          95cffe8a8dd0881229d8c1aa042bcd57
其他資訊 3:          6a3c
其他資訊 4:          6a3c6b3c38ebfac38d8be3e4a483fbe3
閱讀我們的線上隱私權聲明:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c04
Please let me know if more information is needed and I am willing to provide any information you need.
Thanks very much for all your help. Really thanks!
John

Desktop products are generally not supported on server operating systems. That's all you will ever hear about the matter. That being so, you shouldn't expect anyone to have any answers for you. It's simply an exotic scenario and very few people, if any at all, will even have bothered to try.
Mylenium

Windows Multipoint Server CAL requirement

Hello,
I have to do an installation of Windows Multipoint Server 2011 Premium. By default it comes with 20 users access for Remote Desktop. My query is should I have CAL'S for first 20 users or is it free with base server licensing. And what if I have to add more
than 20 users for Remote Dekstop.
Thanks in advance.

Hello,
on the Microsoft Product Use Rights(PUR) is mentioned that for using Multipoint Server Premium, you Need MPS CALs+windows Server CALs.
only with this exceptions:
CALs are not required to access server software running a Web or HPC Workload.
CALs not required for access in a Physical OSE used solely for hosting and managing Virtual OSEs.
Windows MultiPoint Server 2012 Connector:
You may install and use the Windows Server 2012
MultiPoint Connector software on any device that is licensed to access Windows Server 2012. You may use this software only to access the MultiPoint Server software.
If you access the server software from this device solely to use the MultiPoint Dashboard you do not need a MultiPoint Server CAL.
thanks
diramoh

Firefox will not run for mulitple instances of the SAME user account on Windows Multipoint Server 2011

We have an HP MS6200 MulitSeat PC
It is running Microsoft Windows MultiPoint Server 2011 (which appears to be a tweaked version of Windows 7)
It is set up in a computer lab, and students log in using their shared room account - ie multiple instances of the same user accounts are running on the PC at the same time.
The first student to run Firefox can work with it without problem.
However when another student tries to start firefox they get the following message:
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Thanks for the quick reply.
I managed to get this to work by using:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -profile "%temp%\ffprof" -no-remote
This works because Windows assigns a different temp location for each instance of a user
Thanks for your help

How to connect to Window 2003 server using "connect as"

How can I set up Lion to easily connect to specified shares in the windows 2003 server. I want to authenticate as a user other than the one I am logged into on my Macbook? I am setting this up for teachers in a school. The macbook may be used by multiple teachers. Best way (simplest) please.

Hi
Let's pretend the Windows Server has an IP address of 10.10.10.254
Go Menu > Connect to Server > smb://10.10.10.254. When prompted enter the account credentials of a user (username and password) that exists on the Windows Server. Alternatively you could use cifs://10.10.10.254. Either one will do. Assuming no 'silliness' on the Windows Network Administrator's part the share should mount.
For ease of connectivity afterwards you could tick the 'remember password using keychain manager' box. Personally I find keychain manager more trouble than it's worth. However you deal with this as you see fit. If it's multiple users using the same workstation I would not enable the option.
Once mounted you can view the Server Share on the user's Desktop by enabling the option in the Finder. It should appear as a blue-ish drive icon on the Desktop. Add the icon in that User's Login Items in the Accounts Preferences Pane. Think of it a little like the Windows equivalent of "mapping a network drive".
Next time that user logs into their local account and provided the workstation is connected to the same network, the share point should mount.
You could also or alternatively drag the share icon to the right hand side of Dock. Click on it to re-connect to the share after you've disconnected from it.
HTH?
Tony

Where is the Forum for Multipoint Server and Licensing Issues?

I have installed MSDN release of Multipoint 2012 Standard in a VM for testing, and tried to use one of the assigned license codes from my MSDN subscription, and they are rejected by Multipoint server "Error, unable to validate the following codes..."
Please point me in the right direction.
Thanks.

Hi,
I'd probably ask over in the MSDN Subscriptions forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=msdnfeedback&filter=alltypes&sort=lastpostdesc
EDIT: See below for a quicker contact option. That's a nice perk..
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

What kind of anti-virus software works with Windows Multipoint Server 2012?

Is there any certified anti-virus software for Multipoint server 2012?

You can use ie one of these
System Center EndPoint Protection
ESET Antivirus
McAfee VirusScan Enterprise
Symantec Protection Suite

How to troubleshoot Windows 8 Mail app connectivity issues with Google Business Apps?

My company went to Google Apps last year. I am unable to connect Mail App on Windows 8 to my corporate Google account. I am using m.google.com for server with SSL enabled, but no luck. I also enabled bit locker as my company policy requires device encryption.
Mail App does not give a clear error message. It simple states that this PC does not meet security policies enforced by Google. Please advice. I already made peace when my Nokia Lumia 920 running windows phone 8 does not connect to Google
apps because of a bug that would not turn on device encryption unless requested by Active Sync and it would not turn on with Google sync.
These are annoying issues that Microsoft must fix to gain enterprise support. Here are the settings from my mobile settings page:

Answer is of no use. I tried all the forums and websites. I am not able to connect to corporate google apps because it requires SD card encryption. How do I enable this on windows 8.
Please discuss this with your boss and other peers before answering. This is an advanced question. I am going to paint this a little bit more..
Today's enterprise requires that most devices support device encryption and Windows Phone does support device encryption but here is the problem- there is no support for SD card encryption. Even for phones like Lumia 920 that does not have an SD card cannot
connect to Microsoft Exchange ActiveSync due to a bug in the implementation.
When the policy parameter Require Encryption on Storage Card is enabled, Windows 8 and Windows Phone 8 devices misreport the presence of an SD card, even if the device has no SD card slot. The policy enforcement occurs, provisioning fails, and the device
cannot be synchronized. You can read more on their support site:
http://support.microsoft.com/kb/2464593
This long thread on the Microsoft community is a testament to this problem:
http://answers.microsoft.com/e...3ce3-49e4-8069-ecdccd55a5f9
This is also a problem for those enterprises that are using google apps and running Microsoft exchange activesync. Take a look at this request and policy that will throw the 85010013 error on your windows phone.
Request :
https://m.google.com/Microsoft-Server-ActiveSync
Server Data:Provision/Policies/Policy/Data/EASProvisionDoc/RequireStorageCardEncryption=1
Overall, I hope Microsoft fixes this issue soon

HP Business Inkjet 1000/1100 Windows 7/Server 2003 Driver Issues

Hi, wondering if anyone can help.
We are having problems with Windows 7 32-bit printer drivers and our print server which is on Server 2003, the printers concerned are a HP Business Inkjet 1000 and 1100. We have VMWare installed on our clients running Windows 7, I can add the printers locally onto any vdi desktop using the driver pre-installed on Windows 7 and it can print perfectly with both of those printers. I installed the same driver onto our print server, tried two ways, first I connected to the server through Print Management and updated the driver from one of our Windows 7 clients (which is how I've been instructed to do) and I've also tried finding the local printer on my Windows 7 desktop while logged in Server 2003, both ways appear to installed the driver with no errors but when you go to print it just prints 3 blank sheets no matter what you print, it even does this for the test page, also the Printing Defaults under the Advanced tab keep resetting themselves, it's not applying any changes I make.
I'm failing to understand how the driver can appear to work when installed locally on the desktop but when it drags it from Server 2003 it's not printing correctly when in essence it is the exact same driver .... is Server 2003 not liking the fact it's a Windows 7 driver?
I am using the HP Business Inkjet 1000 driver in-box on Windows 7 Enterprise for both printers. The reason I'm using this driver is because the XP version of this driver which we had on our print server would print but would not print out certain graphics and symbols when printing from Windows 7.
Anyone else had similar issues?
Any help will be appreciated.

Hey there Cindy
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows Multipoint Server 2012 black screen - screensaver pops up frequently

Hi,
After install WMS 2012 and patch WMS-KB2791647-ENU-x64, all hardware drivers and patches, the system ran well for 2 days, but then the screen
saver pops up frequently with visible mouse pointer.
When
the screen saver pops up and I move
the mouse, the desktop near the mouse appears but soon the screen switches from desktop to screen saver. Please check the video below:
https://onedrive.live.com/embed?cid=3DF42D4FE0756054&resid=3DF42D4FE0756054%21219&authkey=AEpUbFn6Q_ngTWM
The issue is gone in safe mode.
Disabling screensaver doesn't work.
The graphic card is Nvidia Q600, with latest driver.

Can you provide more information about the setup you have for your server? Specifically whether or not it is domain joined or not and whether there are any specific policies that might have changed to trigger the behavior? Also, the information about the
number of users, types of user (domain/local), the types of station (USB direct connect, thin clients, zero clients, etc.) would be helpful.

Windows Multipoint Server Station Connection Issue

Similar Messages

Maybe you are looking for