Windows needs to install driver software for your Apple Mobile Device (recovery mode) what do i need to do for this error? i tried all the options and my ipod wont work , need help???

i am using ipod touch 4g

rishiv93 wrote:
i tried all the options...
Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

Similar Messages

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver

    I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help

    http://support.apple.com/kb/TS3694#error1

  • IPad - Windows Vista unable to locate Apple Mobile Device (Recovery Mode)

    Hey everyone , I am at my wits end trying to fix this problem . Having spent hours and hours researching a solution I am no closer to finding a resolution.
    The problem began during a software update last week ( I have an original iPad , prior to this I had used it on my PC for nearly 12 months without issue).
    During the software update it started coming up with a "Found New Hardware Apple Mobile Device Recovery mode" then "Browse for Driver software" , so I direct it to C:ProgrammeFiles\Apple\Mobile Device Support\Driver etc .... however it still cant locate it.
    Now - the iPad is stuck in Recovery Mode. It has been nearly a week now.
    Here is what Ive tried
    Confirmed Apple Mobile USB installed and working
    Followed the Apple Support prompts re drivers to a tee
    Tried manual update of Driver
    Updated to latest iTUNES
    Uninstalled then reinstalled driver
    Read post after post on "similar" issues
    Nothing is helping
    Please , please , please , pleeeeeeeeeease can you guys help ?
    Please note following
    My iPOD Classic is recognised fine by my PC and is 100% working
    I havnt completely deleted itunes then reinstalled because post after post tells me this doesnt fix this particular issue
    During the software update initially it was coming up with a 604 error / Restore as well as the Driver issue , now my ipad is not recognised at all by Windows
    Yes - I could take it too another PC to restore , but I want it synced to my PC and ITUNES library
    I feel I'm no Computer Dummy , but this one is a total head scratcher
    Heeeeeeeeeeeeeeeeeeeeeelp !!!!!!!!!!

    Fixed.
    Took iPAD to Apple store who restored back to factory setting.
    Brought home and it synced fine
    Back up and running
    Diagnosis ? probably some soft ware update glitch
    Lesson ? - dont waste your time reinstalling Itunes for this problem

  • Windows can't find Apple Mobile Device (Recovery Mode) after iTunes 9.2 upg

    Hey guys!
    My iPhone 3G (3.1.3) and iTunes (9.1) has been working normally when I upgraded iTunes to the 9.2.0.61 version to install the OS4 in my iPhone.
    After this, when my iPhone turn on in Recovery Mode, Windows cannot find the driver "Apple Mobile Device (Recovery Mode)" and the iTunes can't upgrade to OS4.
    If I turn on my iphone in normal mode, Windows can install successfully the driver and iTunes recognize the iPhone.
    I put my iPhone in another PC (with Windows XP and iTunes 9.1) and the Windows found and installed the iPhone drivers in Recovery Mode. But, in this computer, I've also tried upgrade the iTunes to 9.2 version and the same Problem has benn ocurred.
    Someone else has the same problem???
    Thanks for help!

    I GOT THE SOLUTION!!
    This problem happens due a conflict between the Samsung's Software "NEW PC STUDIO" and the Apple Drivers!
    The solution is unistall all Samsung's Software and removing all Apple Softwares as well (like iTunes, device drivers etc)
    Then cleaning the Windows Register with some software like CCleaner AND manually using REGEDIT, just find for Samsung (carefully with other Samsung Devices like HardDrive. You musn't remove something like that) then, finding for New PC Studio.
    Remove all Keys related Samsung New PC Studio.
    Restart your PC and reinstall iTunes lastest version.
    Now, you can put your iPhone in Recovery Mode that Windows will recognize it!

  • I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

    I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

    Hi chiekoo,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694#error21
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    Best of luck,
    Mario

  • I just bought a brand new Ipod touch but when I went to update it, a screen keeps popping up saying that the apple mobile device (recovery mode) was unable to install to my ipod and the ipod will keeps showing me the connect to itunes, what can I do?

    i really need help with that

    Maybe here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Otherwise com back with the exact wording of your error message. The one you gave does not seem correct.

  • Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

    Want to us my time capsule model A1409  as only backup. 2 TB hard drive.
    Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
    Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
    And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
    Have tried all of passwords can think of and none work.
    Held the reset button for one second on back of capsule and do not see if anything happened.
    What a conundrum.
    Appreciate any help to get this working.
    Thanks,
    John R

    I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
    Mine is wiredup thus;
    Eth cable from iMac to modem (not the WAN port should you have one),  then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
    I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
    and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
    Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
    Alan

  • HT1386 apple mobile device (recovery mode)  I cannot find device driver to install so that Itunes will recognize my ipod touch...?

    An update to my ipod touch failed to install.  Somehow the driver failed to install and then somehow the drivers got "lost"  I looked all over my system for a driver, windows searched the web for a driver to no avail.  I looked on Itunes for updates and my itunes is updated.  At a loss for what to do next to try and recover driver....help anyone?  thanks

    Try
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Then the driver topic of:
    iOS: Device not recognized in iTunes for Windows

  • Windows needs to install driver software for your unknown device

    Windows needs to install driver software for your unknown device
    This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!

    The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567

  • T61: Windows needs to install driver software for your ATA Device-help!!

    Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
    The DVD player has been out of commission all of May so far.  I can't stand this.  What is happening?
    I can't even download the driver from Lenovo.
    PLEASE HELP.
    Thanks in advance.
    You are a God if you can't help me fix this.
    Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
    Message Edited by Agotthelf on 30-05-2009 08:21 AM

    Welcome to the forum!
    Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • HT1338 I am trying to update a Brother MFC-J5910DW firmware and driver software for OS X Mountain Lion. The instructions say I need to have JavaVM (Virtual Machine) on my system. How do I load it and wasn't there a "fix" apple sent out for Java?

    I am trying to update a Brother MFC-J5910DW firmware and driver software for OS X Mountain Lion. The instructions say I need to have JavaVM (Virtual Machine) on my system. How do I load it and wasn't there a "fix" apple sent out for Java?

    Java for OS X 2013-002

  • HT1977 I'm a iPhone 4s and new iPad 3 owner.  I'd like the apps and organization I've invested in the iphone to be exactly transfered to the ipad.  Is this possible?  Will all the applications and folders match exactly?  Thank you for your help

    I'm a iPhone 4s and new iPad 3 owner.  I'd like the apps and organization time I've invested in the iphone to be exactly transfered to the ipad.  Is this possible?  Will all the applications and folders match exactly?  Thank you for your help

    Restore the latest iPhone backup you made to the iPad.

  • Just installed the update and now iTunes wont open! Help!!!

    Just installed the update and now iTunes wont open! Help!!!

    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for

  • Process Improvements in PI 7.0

    Dear Experts,     I  am in production support project in PI 7.0.I like to give some good process improvemnts for our area PI 7.0 to my customer.    I need your suggestions some good ideas such that it can leaverage the existing PI system(Production s

  • APPLE TV SAYS HOME SHARE NOT ON WHEN CHECK COMPUTER IN ADVANCED SAYS IT IS

    apple tv shows sharing is switched off but computer show in advanced that it is switched on and when I switch router off then back on and reset it comes ok thanks

  • Recommended Patch Clusters and Zones

    Good Afternoon, Ran into a problem earlier this week and wanted to get other views on this. Our current configuration is as followed: Global zone installed on Local Disk (ZFS) 5 - Non-global whole root zones installed on SAN disk (ZFS) No Live Upgrad

  • Add restriction in CO11N for storage location without doing goods movement

    Hi experts, my requirement was to restrict user for some storage location in CO11N, though i completed it using badi "WORKORDER-GOODSMVT" there is some issue. Some user just confirm the order in the front page only they are not going in for goods mov

  • Problem Sap Gui access Business Explorer

    I have a machine is the same with Windows Vista Home Premium, sap logon 7.10 - patch 13(gui710_13-10002995.exe) ADD ON installed: bw350gui710_6-10004473.exe bi710sp09_900-10004472.exe Access to the SAP system is perfect, but when I try to open the Be