Windows No Disk - Exception Processing Message

I just got this error when trying to open my Adobe Premier 7.0 out of the blue... Windows - No Disk. Exception Processing Message... anyone know how to fix this?

Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives. 
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt

Similar Messages

  • Windows - No Disk Exception Processing Message on iTunes start-up

    Every time I start up iTunes I get this annoying Windows Error Message.
    Windows – No Disk
    Exception Processing Message c000001e Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c
    Cancel Try Again Continue
    If I click any combination of the three buttons many times it eventually goes away.
    Then, it also happens when doing any operation with a song file such as conveting format or it rate. In this case it may lock up iTunes and require a C-A-D to get out of the application.
    HELP!!
    I've tried updating the iTunes software
    Medion   Windows XP  
    Medion   Windows XP  

    Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
    Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives. 
    Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
    Hunt

  • How do I get rid of "Windows No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c" when firefox starts up ? Does not show a solution!

    How do I get rid of "Windows No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c" when firefox starts up, I have to hit continue twice to get past this error message. Then all is OK. The solution shown for this thread does not make sense.
    == This happened ==
    Every time Firefox opened
    == Firefox was updated

    In Google, search for ""Windows No Disk Exception Processing" (including quotation marks). Lots of different answers out there.
    632 results on this search limited to the last year:
    https://encrypted.google.com/advanced_search?q=%22Windows+No+Disk+Exception+Processing%22&hl=en&lr=&tbs=qdr:y&prmd=df

  • Error message with Vista and 7.2: Windows-No Disk Exception Processing Mess

    I just got a new Dell computer with Windows Vista and I am trying to put iTunes on it. I can install it fine from the original CD, and then I am prompted to update it to 7.2. After updating, this is the message that I get: Windows-No Disk, Exception Processing Message 0xc0000013 Parameters 0x7620023C 0c847CDB4C 0x7620023C (Cancel Try Again Continue). If I click on any button countless times, iTunes does open up but then I get the blue screen dump message. I have installed and uninstalled it many different times and have tried any of the additional updates/patches with no effect. I did not see this message anywhere else in the forum, anyone able to help?

    Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
    Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives. 
    Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
    Hunt

  • No Disk error/Exception Processing Message keeps appearing

    THIS IS A BUG!
    When I have a song listed in itunes but it can't find it on my hard disk, I get the message:
    WINDOWS - NO DISK
    Exception Processing Message c0000013 Parameters 75b6f9c 756bf9c 75b6f9c
    CANCEL TRY AGAIN CONTINUE
    This used to cause my system to HANG everytime it appeared. (Needed a COLD REBOOT.) I reinstalled itunes and now it doesn't hang, but the message shows up frequently! What a pain!

    I get this same message every time I start iTunes. It started happening after my most recent update of QuickTime. I have removed and re-installed both iTunes and QuickTime but I continue to get this exact error message.

  • Illustr 10 - ERROR MESSAGE "Exception Processing Message"

    XP SP3, 8GB RAM, lots of storage
    Went back to open previous projects and got this message:
    "Windows - No Disk
    Exception Processing Message
    c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
    Message keeps popping back up. Only happens on certain files. ???
    Never had this problem before, I'm pulling my hair out.
    I did full system fatal restore this morning, ran virus check, reinstalled all Adobe, the whole bit. Opened up the same files ... after all that, same problem.

    Yes, I was on that thread the other day ... it seems like there isn't one definitive answer to this (Google provides many different answers). As I have multiple hard drives and the file was originally designed on an external hard drive "book", you might be pointing me the right direction. Thanks for the suggestion.

  • Exception processing message on K230

    I just got an IdeaCentre K230 (running Vista) and transferred my files from my old computer to the new one using LapLink.  Now the new computer has been crashing, and I keep getting the following message:
    Windows--no disk
    Exception Processing Message
    0xc000013 Parameters 0x00007FEFD577240, 0x000000000000004,    
    0x00007FEFD577240
    How can I fix this and, hopefully, stop the crashes?  Thanks.

    Go through these two links 
    http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/b40b36b8-6983-4844-9519-05c58411...
    http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/aec213ac-accd-4347-9b76-853...
    Can you open your computer in the safe mode?
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Exception Processing message

    When I try to Run Project I get the following error message:  Exception Proessing Message 0xc0000013 Parameters 0x000007FEFD967240 0x0000000000000004 0x000007FEFD967240 0x000007FEFD967240 No Disk.
    what I have done with Flash Catalyst:  Opened a new project, drag over a text field, change text inside it to "Enter Zip Code".  Drag out a Button, change text to "Submit"; select both items, Modify>Left.  Then go to File> Run Project with the previously detailed error message.
    OS Vista Ultimate
    8gigs of Ram
    Quad Core Intel Processor

    This sounds like one of the following issues:
    http://kb2.adobe.com/cps/404/kb404409.html
    http://kb2.adobe.com/cps/403/kb403140.html
    Although these TechNotes are written about Flex Builder 3, they also apply to Flash Catalyst (as well as other Windows apps -- just Google for "no disk Exception" or check out http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing.html to see more tales of woe).
    Hope that helps,
    - Peter

  • Exception processing message 0xc0000013 after updating itunes and Quicktime

    After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
    I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
    I'm using Windows Vista and this is driving me nuts.
    Any help would be greatly appreciated.

    I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
    . It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

  • Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf

    Please help. I keep getting the above error message everytime I plug in my ipod and then everytime when I try to click on something, of go somewhere. I have to press the continue button repeatedly everytime. Its getting so I don't use the sutpid ipod anymore. I have tried deleting itunes from my computer and then re downloading it but that doesn't do anything. It is driving my insane. I have to restart my computer after I have finished charging my ipod for it to go away. If my ipod is not attached then everything is fine.
    PLEASE HELP.

    In Google, search for ""Windows No Disk Exception Processing" (including quotation marks). Lots of different answers out there.
    632 results on this search limited to the last year:
    https://encrypted.google.com/advanced_search?q=%22Windows+No+Disk+Exception+Processing%22&hl=en&lr=&tbs=qdr:y&prmd=df

  • Exception processing message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf

    I can't open my itunes and the message in the subject appears. What do I do.

    In Google, search for ""Windows No Disk Exception Processing" (including quotation marks). Lots of different answers out there.
    632 results on this search limited to the last year:
    https://encrypted.google.com/advanced_search?q=%22Windows+No+Disk+Exception+Processing%22&hl=en&lr=&tbs=qdr:y&prmd=df

  • Flex launching error on Windows Vista (Windows No Disk - exception ....

    Hi guys, I downloaded the flex builder from adobe, I install the application but when I'am trying to lauch my application I get the error
    Windows - No Disk ... exception processing message 0xc0000013
    I reinstall adobe flash and my java runtime, I still get the same error, I can create an application but I can't execute it, that's sucks!
    I check on adobe in the faq for flex, they say that error occurs when you install the application from a DVD, that's not true, I downloaded from their site....
    thanks
    Alex

    Ok guys, I found it myself, very strange!
    I just change my default workspace to another one, I got the same problem then I just put back the default workspace and the problem was resolved!
    Alex

  • "Exception Processing Message" error when clicking the Accessing Server Data link on the start page

    When I first started the application, I click the Accessing Server Data link on the start page.  I immediately got the error "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c in a dialog box titled "Windows - No Disk".  I had to used Task Manager to remove the box after closing Flash Builder 4.  I then tried the video tutorial on "PHP Services in Flash Builder 4".  I keep receiving an error during service introspection trying to connect to the PHP class.  It was the same error as the other individual "Cannot Connect to PHP Service".  So I tried another tutorial and generated a sample PHP class.  I moved a datagrid on to the stage, droped in the getAllItems function, and configured the return type.  However, when I ran the app, I received the same error "Exception Processing Message" again.  I have attached the screenshot of the error in addition to my phpinfo and log files.

    "The exception process message" is definitely a issue. Is it happening consistently, if so can you file a bug at bugs.adobe.com/flex and give out your machine config details, and the error log.
    With regards to generating a new php file and the introspection error that you are getting, looking at the logs it probably is two fold.
    First off the name of the file and the class name should be the same, are you having employeeServices as the name of the class in employeeServices.php file.
    Second, It seems prior to generating this new file, you had a syntax error at line 5.
    It would be easier to figure out what the error is, if you can also attach the php file, by removing any sensitive information in that.
    Hope this helps.
    Thanks
    -Sunil

  • Have you received "Exception processing Message" when opening iTunes?

    When I attempt to open iTunes my computer gives me the following message "Exception processing message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c" In top left corner of the window it says Windows no disk.
    I have uninstalled iTunes and reinstalled but it does the same thing. What's more frustrating is when you buypass the message, open iTunes, and then try to download album art, the message pops up with every album searched. Any ideas????

    hmmmm. i managed to find one discussion on that error message over at the Windows Newsgroups (they were getting it from different programs):
    Discussions in Virus Discussions
    (click on the post with the title "exception processing message c0000013 - AVG anti-rootkit".)
    following up on their investigations ... do you have a pen drive or some other similar drive installed on your PC?

  • Exception Processing Message - Help

    Hello, I have Quicktime 6.5.1, I just checked. I tried to get 7.o once but it was not successful I guess. OK here is my problem when I click on a video to open it up I get this message ''Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c'' in the bar it says ''Windows - No Disk'' I cick cancel & its up again so I click cancel about a million times & the video Pops up, so I click cancel a million more times & the error message finally goes away & the video plays fine. How can I fix this?
    I appreciate any help!
    Also I was having trouble with some videos not working saying the had an input/output error but that was somehow connected with the fact that I needed to take ownership of my files because I was getting ''access denied'' on lots of my photos but that is now fixed.

    For the "No Disk" with QT 6, if I can remember correctly. In C:\Documents and Settings I think it is a QuickTime qtr file. Right click on it, go to properties. At the bottom of the window that comes up, under Attributes: you need to check or uncheck Read-only, I forget, but its one or the other

Maybe you are looking for

  • SAP R/3 ...Dispatcher is not starting and all table fields are ended...

    Hi Experts Pls...Help me out regarding my sap R/3 4.6c startup problem.. <u>on my local machine</u> while staring the server, i am getting the following errors... <u>The message server starts but the dispatcher doesn't start..</u> 1. The dispatcher s

  • Mailbox server web services proxy issue

    One of our 3 mailbox servers gives us an error when mailbox databases are mounted on it. All web services are not functioning properly, there is an event log error for each web service web.config file saying file not found, If I open each web.config

  • Business area not substituting in New gl EHP7  Upgrade

    Hi , i have written substitution for Business area field in GGB1 I am trying to post entry that time its not substituting the value now i am testing in New GL and EHP7 Upgraded System Pls anybody help on this Regards

  • Modifying Oracle AS Portal In built packages

    Hi, Is there any way to access the oracle portal in built packages and also can we modify that?

  • If you guys do not stop it!!!!!!!!!!!!

    If people acted like this every time a company dropped their prices on something, a VCR would still be $1000 and Plasma TV would STILL be $10,000. I have never in my life heard so many people ***** about a good thing, take the $100 credit and by some