Windows not reading ipod nano?!?!?!?!

when i plug in my ipod nano into my computer, the computer screen freezes for a while, then the error message, "ipod has been detected, but cannot be identified properly, please unplug and try again" comes up. i have 'unplugged' numerous times, and the same error message comes up. the ipod is not detected by itunes, and just automatically ejects itself.

I am assuming that you have Administrator privileges on your system. If not, you will need them.
Hit Ctrl-Alt-Del, then T to open the Task Manager.
Click on the Processes tab.
Scroll down until you see iPodService.exe.
Click on it to highlight it.
Click on End Process at the lower right corner of the box.
Congratulations, you've just stopped the IPod service.

Similar Messages

  • Itunes will not read Ipod Nano...

    I just got an Ipod Nano for my Windows XP Dell Inspiron 8500. Installed the latest version of Itunes 5... and any 'latest' updated for Ipod software. (uninstalled/reinstalled SEVERAL times)
    Everytime I open ITunes, I get a message saying:
    "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." ...
    SO I did that .. didnt work.. then I went to the Apple site and followed step by step instructions to possibly correct this problem... I followed ALL instructions and I still get the error message. My computer , windows explorer, detects the ipod fine.. but Itunes just cant read it... any ideas or help on this one?? Im about to pull my hair out.
    thanks!

    my advice is to uninstall EVERYTHING you downloaded, this includes iTunes 5 as well as anything else (eg iPod Updater), reboot as prompted to a clean state. Then install just the software that came with your nano on the CD. There's software on the CD that cannot be downloaded. Provided this works, and iTunes 4.9 can recognise the nano, THEN you can install iTunes 5.0 and whatever else you want.

  • Windows not installing iPod nano 3G

    When i plugged in my iPod nano 3G for the first time the "Found New Hardware Device' bubble came up and it recognized that it was an Apple iPod, but then it said that there was a problem with installing the new device and that it might not work properly. After this I cant see my ipod in My Computer or in iTunes. Under the hardware profile it shows an exclamation mark symbol next to the ipod. I've tried uninstalling it and reinstalling it but that doesn't work either. I just repeats the same process. I've tried updating the driver but it says it can't find an updated driver. The real strange thing is that I have an iPod Video 5G that has been working with this computer for 2 years now. So why wont the Nano?
    So after i got fed up with this, I plugged my ipod Nano into my laptop and it worked flawlessly. But all of my music is on my desktop which is why i need it to connect. Any help?

    This is the same problem I'm having & no other USB devices are hooked up to my laptop, can anybody HELP??????????
    Before I install iTunes Vista recognizes my iPod, it shows up in My Computer and I can use it as a storage device. In Device Manager it shows up under disk drives as an iPod and under USB controllers as a mass storage device. After I install iTunes it loads new drivers, or it tries to. It installs a new iPod USB driver & then it tries to install iPod drivers and never finds them. It tells me the device drivers were not found & I can't use the device until they are loaded. Now the iPod won't even show up in My Computer. When I check Device Manager there is an entry for the iPod with an exclamation mark beside it & under USB controllers it is now listed as an iPod USB device. When I uninstall iTunes it still won't recognize the device properly but if I do a system restore, back to before I loaded iTunes, and then plug the iPod back in it goes back to recognizing it in My Computer as an iPod storage device and under Device Manager it checks out OK. I think the problem is with the new device drivers iTunes installs. When installed iTunes will start up no problem, it's just when I plug in the iPod it loads the problem drivers & I have to do a system restore to get my iPod back again. Please help, I've had to do a system restore 5 times now & it still won't work. I can either have an iPod loaded or iTunes load, just not both at the same time. I'm very familiar with computers & software but this is driving me crazy
    BTW, my iPod is a new 3rd generation Nano

  • Windows not reading iPOD

    I have an IPOD shuffle and it was working fine with my PC until yesterday. Now none of my laptops can read what's on it. I've tried on multiple computers. Can someone help? Thanks in advance.

    This appears to be a very common problem (at least from looking through all the posts here). I've spent two weeks trying things, and I'm just about at the point of concluding this is a design problem, and that there is no solution.

  • Windows XP Media Center Edition does not suport ipod nano...need programs

    I was just informed by Apple Service that Windows XP Media Center does not support ipod nano, but that there are online programs available that would allow me to use my ipod with Windows XP Media Center. Does anyone know of these porgrams?? If so, could you recommend a website? Thanks!

    was just informed by Apple Service that Windows XP Media Center does not support ipod nano
    Correct. Sort of.
    Windows Media Center is not a computer. Just as Mac OS is not a computer. It is a operating system. (a version of Windows XP).
    You have a PC with Windows XP Media Center.
    You cannot use Windows Media Center OS to load the iPod.
    You need to load iTunes to manage the iPod.
    And yes, you can use the iPod Nano on Windows XP Media Center.
    See here -> iPod: System Requirements

  • Ipod nano 6 gen power button and volume up and down not working, Ipod nano 6 gen power button and volume up and down not working

    Ipod nano 6 gen power button and volume up and down not working, Ipod nano 6 gen power button and volume up and down not working

    Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.

  • Windows 8 does not recognize ipod nano anymore

    Windows 8 does not recognize my iPod nano anymore
    Did so in the past
    Followed all troubleshooting tips on Apple's page
    Any other suggestions

    Hi there catfish1967,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • Windows will not recognize ipod nano anymore

    At the beginning it was working fine, but after I left it for a week it stopped working. When I plugged it to the computer, the computer would not recognize it.
    When I plugged in the ipod nano into Window XP, the following happens:
    - Window XP lags and take a long time to display the message "new hardware found"
    - my ipod displays the charging symbol
    - then ipod shows the screen "Do not disconnect" and it stalls on this screen
    - after awhile, Windows show a "safely remove hardware" icon on the bottom right of my screen, but it describes the recognized hardware as "Apple ipod USB Device at location 0"
    Note that:
    - my ipod is not charged at all after all this
    - itunes would not recognize my ipod
    - there's not hardware icon in "My Computer" and "Device Manager"
    - my computer can recognize my friend's ipod
    - I can neither restore or reset my ipod because it does not get passed the "Do not disconnect" screen
    So if anybody could provide any help, i'll be very very grateful. =P Please save me.

    Maybe for that one week that you left your iPod nano idle, your iPod software automatically updated and left you with some strange conflict.
    Anyhow, your symptons sound similar to some described in this article:
    http://screwdave.blogspot.com/2006/05/ipod-nano-updater-3-23-really-needs.html
    Not sure if the solution presented in the article will work for you, but let us know if it solved it.
    Your Knight in Shining Armor (<---hehe, had to add that in)

  • Windows does not recognize ipod nano

    i cannot get windows (or itunes) to recongize my ipod nano. once in connect the ipod, i get the 'do not disconnect' message indefinately. it used to work. it reinstalled itunes, reset my ipod, etc. any suggestions?

    thanks, but the troubleshooter assumes windows is recognizing the ipod. in my case it is not. i download itune 7.0 just in case. same problem exists. in fact, since windows does not recognize the ipod, itunes eventually freezes up.

  • Windows Vista not recognising Ipod nano

    Hi there can anyone help me PLEASE.
    I have just purchased a new laptop (Advent). Its O/S is windows vista.
    The problem Im having is that I have installed iTunes and and all other downloads but when I plug in my ipod nano (3Generation 8GB) I get a pop up messages saying. Install device driver software. I dont have a disk and I cant find where to get the driver from. I have tried uninstalling and reinstalling iTunes (it is the latest version Im using)and nothing seems to work.
    Please can anyone help me.
    Many thanks
    Miss DMP xxxx

    I would just hurry and get a new cable, but start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • Windows Vista + Itunes + Ipod Nano

    Does not Ipod Nano 4Gb and Itunes works yet width Windows Vista?
    Runs Vista Home prem and my computer dont finds any drivers for the ipod when i connect it, have the latest Itunes and firmware in the ipod.

    -

  • File size of Notes on iPod nano?

    Hello,
    my question is about the file size of notes to be handled by the iPod nano.
    I have copied several ASCII text-files into the Notes folder of my iPod nano. Each has a size of approx. 20 kByte. Windows Explorer shows them in the iPod Notes folder with their original size.
    However, when opening one of the text files on the iPod nano, text is only displayed until approx. 700 words (approx. 4000 characters), which corresponds to approx. 4 kByte. The larger rest of the file is not displayed, as if it was cut.
    Is this an error?
    Or is 4 kByte the max. size of text files which can be displayed as notes on the iPod nano?
    I have updated the iPod nano firmware recently with release 1.1.
    Thanks in advance for any help!

    There is an online utility for doing this - will save you tons of time AND adds links so you go from one section of the larger file to the next:
    http://www.ambience.sk/ipod-ebook-creator/ipod-book-notes-text-conversion.php
    Until they inprove the file size that the iPods can read, this is your only real way to use your iPod as an ebook reader.
    PC   Windows XP Pro   nunayobeezwax

  • TS1363 windows 8 and ipod nano issues

    I just installed Win8 and downloaded the latest version of itunes now my ipod nano isn't syncing. I followed the troubleshooting steps with no results.

    Hi there franscard,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • Apple IPod USB Device Driver Not Installed?  WIndows not reconizing IPod!

    Hoping someone can help me with my new Ipod Nano. I installed the IPod Updater and Itunes programs from the provided CD and formatted the Ipod. That all works fine -- the Ipod actually works, etc.
    But during the actuall instation process, the Hardware Update Window came up for the 'Apple IPod USB Device' (I use Windows XP) I've tried to have it install automaticaly and manualy, without any luck. As a result, when the IPod is connected to the computer, I get a '!' on the device in Windows Explorer and neither ITunes or the Ipod Updater -- or Windows -- will reconize it!
    If I connect my Ipod to the computer, the 'hardware' icon comes up in my system tray and the Ipod screen changes to the 'Do not disconnect' message. I can click on the hardware icon to 'remove' it. But I can't DO anything with the Ipod if nothing will reconize it!
    I've tried updating the ITunes and Updater to the latest versions, plugged the USB cable into different spots on my computer, uninstalled and reinstalled everything, this time selecting the 'do not connect the Ipod to the computer at this time' option.....nothing. Windows just will NOT reconize the IPod and everytime I install the software I get that Hardware Update Window screen up!
    Is there a driver for this I'm missing somewhere? What's going on? I can't do anything with my IPod and can't even find a phone number to call Apple for help!

    1-800-275-2273.
    This might be an issue with your operating system. You might also want to try using it on another computer before calling them as they'll probably ask you to do so. This will isolate the problem to your computer and they might tell you to try calling Windows or getting the latest drivers for your computer.

Maybe you are looking for