Windows not reconising video switcher

Running windows via bootcamp when presenting it does not reconise vga out put via a video switcher but in mac mode its ok, when going directly a into plasma or projector it works fine in both windows and mac mode, any idea's

Could be an issue with your movie being encoded with the H.264 video codec. Windows users will not be able to view H.264 video without the latest version of QuickTime 7. If you don't want to make each PC user upgrade QT7, then your alternative is to use some other video compression codec, like Sorenson or MPEG-4. These will produce video viewable pre-QT7 but at visibly lower quality and slightly bigger file size.
I have chosen to format "for the masses" and avoid H.264 for the time being for videos on my own site. Not too big of a dealbreaker for me. Check it out for yourself.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

Similar Messages

Preview window not displaying video

As of yesterday when I was in the middle of a project, the preview window simply stopped displaying all video being played off the timeline. It previews the videos in the top left window just fine though. I restarted the program and it still did not fix the problem.
However it seems to be acting strangely in that at random times the video will show up, but then dissappear again once it passes an edit point. I also tried dropping a new clip in the timeline, which caused every thing to work again. Then 10 seconds later the preview disabled not allowing me to see anything. Whether I play it or keep it paused at a point, nothing shows up.
I have been editing this same project for a couple of weeks with no problems. I know it has nothing to do with the media. Running off the latest update and latest OS software.

Actually I just took out one of the clips, which seemed to be causing the problem. No idea why that is since its the same format as the others.
I forgot to mention another unrelated problem going on. Sometimes during playback the audio will revert to a loud buzzing sound at random points in the timeline. Its at a different point every time. Sometimes happens 5 times in a row. Other times every thing will be fine for a few hours.
I trashed the prefs, repaired permissions and rebooted.
Edit: forgot to mention the audio levels are well below red line

I just downloaded the latest Windows updates, now videos online will not work on Firefox but will on other browsers, anyone else having this problem?

After downloading the latest Windows updates I found that I could not play videos on YouTube or at other sites. Switching to other browsers I found I could play those same videos now without any problem. So I did a System Restore to determine if the Windows updates had affected video play using Firefox. The restore point was set to the day before the Windows download occurred. After System Restore was completed I could now play videos using the Firefox browser.
To make sure that the Windows update was the problem, I again downloaded the newest Windows Updates and once again could not play videos on any site using Firefox. System restore was used to again reset my computer to the day before and once again the videos would ow play in the Firefox browser.

Actually your reply took me in another direction and I found this on the Adobe site:
The RealPlayer extension for Firefox, Downloading & Recording, has compatibility issues with Flash Player 11.3. If RealPlayer is installed Flash Player content does not appear. YouTube provides an error message when you try to watch a video.
As a workaround, do the following:
Start RealPlayer.
Click the RealPlayer icon in the upper-left corner and select Preferences.
Select Download & Recording in the left menu and deselect Enable Web Download & Recording for These Installed Browsers option.
Click OK and restart Mozilla Firefox.
Once I followed this I could now again play videos in Firefox.

After updating to windows 8.1 iTunes will not play video

I recently updated to Windows 8.1 but since i have my iTunes will not play video i previously downloaded from the iTunes store. The video will play in QuickTime without issue though, please help

sorry it's not my apple id. it's my icloud email/account. after i updated to ios 8.1.2 my icloud acct on my phone is wrong. it's using my old college email address instead of my current icloud account email. my old college email address *used* to be my apple id, but i changed my apple id to my gmail account a few months back. anyway i can't "sign out" or delete the icloud account bc it thinks my college email address is my icloud account and it keeps asking for the password. so i'll type in the current password for my icloud account and it says it's wrong and i need to retry or change the password, which i've already done twice and nothing changes. probably bc its asking for the password associated with the college email address it thinks is my icloud acct.
i can access icloud on my desktop without a problem... make any sense? do i have to restore my phone now or is there a solution? i've wasted the last 2 days trying to figure this out. i can't send or receive emails on my iphone bc of this. which really ***** for work.

Why does Firefox 4 not open video files (news and youtube) at all, but Firefox 3 and MSIE 8 open these video files quickly, all on my Dell Dimension 8250 desktop with MS Windows XL Pro?

I subscribe to an Earthlink package of telephone and ISP through DSL in Dallas, Texas. To avoid the congestion (time outs and files not found) of the virtual "cloud" servers, as a workaround I connect to the Internet through dial-up on each session on my pc. There is only one pc or computer on my local network. I downloaded Firefox 4 RC and it failed (would not open video files on the Internet), so I removed the Firefox 4 RC program from my pc, and then I downloaded and installed Firefox 3.6.16, which works fine.
My operating system is Windows XP Pro.

Try disabling hardware acceleration. Many visual bugs can be attributed to issues with graphics drivers.
(Firefox -> Options -> Advanced -> General -> [ ] Use hardware acceleration when available)

TS1363 I have a new computor with windows 8 and have installed I Tunes but it will not reconise my old I Pods, as I don't want to lose these tunes what can I do?

I have a new computor with Windows 8 and an old nano I Pod, I Tune does not reconise this, what can I do without losing all my music?

How to use your iPod to move your music to a new computer
iPod appears in Windows but not in iTunes

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

When right clicking to open link in new window (not tab) foxfire immediately switches windows rather than opening new window in background

Just updated to foxfire 15.0, and now each time I open a link in a new window foxfire will switch immediately to that newly opened window rather than opening the new window in the background as it did before I updated to 15.0. I am aware of the option to check or uncheck switching to new tabs immediately, but I am speaking of opening a link in a new window, not tab. Any help is greatly appreciated.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
I have tried turing it off, and then back on.
I have tried just sharing specific items and this still did not work.
I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday). I am just leary about having to recreate all my libraries and how long that might take. I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit). I may try the 32bit version to see if that fixes it first. Unless someone else has, and want to chime in.

Aperture Does Not Import Videos using IMPORT FOLDER AS PROJECTS

SOLVED - Aperture 3.2.1 does not import videos using "Import Folder as Project"
After 2 days of trying to figure this out (actually around 2 hours total) I've finally managed to import all my photos & videos last year. 200 Gigs 54,000 files. First few tries resulted with referenced photos only, no videos. I had no luck with Google, even tried moving a couple of .plist as mentioned from this thread: https://discussions.apple.com/message/11188017?messageID=11188017#11188017 - this worked for some but not for me. Some issues were solved by NOT selecting "Raw Only", this will cause Aperture to skip your videos.
Thank you to these people who took time to share. In return I am posting my micro contribution to the Aperture Community. FILE > SWITCH TO LIBRARY > then create a new library. You should be able to import your photos with videos in folders.
I hope this gets into Google soon. :-)

, I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
Then you may have excluded jpegs from import in your "Import Settings".
Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
After reassembled all the programs to a new hard drive in Mac Pro
Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
Have you checked the permissions and ownership of the jpegs?

Audio works in audio chat, but not in video chats.

So, when I start an audio chat with a friend, we can hear each other just fine. I then switch over to a video chat, and she can hear me, but I can't hear her. I already had to do all sorts of port forwarding in the firewall settings and router in order to rid myself of error -8... this is kind of frustrating!
I fixed the problem a week or so back by simply restarting iChat. When I tried that this time, no dice. Any ideas? Seems odd that it would work in audio chat but not in video chat...

I am having the same issue. Last night my sister and I did a video chat (which took some doing- we are both neophytes which it comes to this technology). It was great! But we had no audio. So we typed our conversation for quite awhile till my sister turned on her speakers...... Then she could hear me!! Now we were excited. But I never could hear them. On the video window there were 3 icons at the bottom, one being a microphone icon which had a line through it. So we are assuming the audio problem is on her end (she's using a Dell) and not at my end (since she could hear me)- is that correct? I checked all my settings and I had my speakers on the whole time with the volume maxed out. I could hear clicks when she wiggled something on her speakers but that was it. Any clue what she needs to check? I know I am posting in a Mac forum but we are giving it try again tomorrow and it would be nice to hear her. I know that there are plenty of us Mac users that have relatives that use PC's so maybe someone might have an answer. Will keep searching though. Judy

IMovie HD (6) will not capture video taken from HV20 in PF24 mode

The preview window shows the video just fine. iMovie complains that Quicktime doesn't have the ability (codec/plugin) to edit or playback my video. I find it ironic that software claiming to support HD and HDV can't read the video. It says to re-install iMovie. Of course, that didn't work. I read some blurbs online from people with similar errors, but mostly that involved copying a codec from their buddy. Is there a way to make this work natively without having to resort to piracy? I did upgrade my machine to Leopard, but the Apple support person didn't seem to think that would keep Quicktime and iMovie HD from working together.

Avoid 24p. It's a format which was introduced only to allow people who couldn't afford film cameras to shoot on video and then have the material transferred to film to show in cinemas. It's for people who shoot mini-documentaries, etc.
It's not a video standard: in America the frame rate for video is 30fps (frames per second) and in Europe it's 25 fps.
iMovie edits video, so it expects one of those two normal frame rates:
The only 'p' frame rate which iMovie copes with is a "rogue" rate introduced by JVC with their first hi-def camcorders which recorded at 720p (720 pixels high instead of the more usual 1080, and shot in 'progressive' mode instead of the more usual 'interlaced' mode which video normally assumes).
If you do manage to import 24p ('progressive') then you'll probably find that the video plays back at twice the normal speed, as 'progressive' frames are just single frames (like film) instead of being split into two half-frame "fields", which is the normal case with video.
So 24p is for "pretending" to shoot film. Try not to use it if you're shooting video!

WEI could not measure video performance , brand new w530 I7 quad

WEI could not measure video performance , brand new w530 I7 quad I keep getting this error still have no score at all in the WEI.
here is log
60388 (8976) - winsat\logging.cpp:0815: --- START 2013\12\8 19:52:57 PM ---
960404 (8976) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent ccb65078-0f66-4bee-9356-9034d5b7c1f0
960404 (8976) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
960685 (8976) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
960716 (8976) - winsat\main.cpp:4585: Watch dog system enabled
960716 (8976) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
961278 (8976) - winsat\main.cpp:2505: > DWM not running.
961278 (8976) - winsat\main.cpp:2470: > EMD service will be restored on exit.
961465 (8976) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '7c59a34b-3fad-4d29-9f2a-da5579fa4fd7'
961465 (8976) - winsat\main.cpp:2793: > power policy saved.
961761 (8976) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
961761 (8976) - winsat\main.cpp:2814: > power policy set to maximum.
962541 (8976) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a
962541 (8976) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device
962541 (8976) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created
962557 (8976) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
962557 (8976) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
962557 (8976) - winsat\main.cpp:1775: > Run Assessment features
962682 (8976) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
962994 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
963508 (8976) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
963508 (8976) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
963508 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
963805 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
964179 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
964460 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
964959 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
965240 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
965646 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
965926 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
966316 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
966628 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
967003 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
967284 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
967752 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
968048 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
968719 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
969047 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
969452 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
969749 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
970123 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
970482 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
970887 (8976) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
971184 (8976) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.
971683 (8976) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
981745 (8976) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1556: 0x800705b4 == ERROR_TIMEOUT
981745 (8976) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 1280: 0x800705b4 == ERROR_TIMEOUT
981745 (8976) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 389: 0x800705b4 == ERROR_TIMEOUT
981745 (8976) - media\mediaerror.cpp:0095: Error: Could not build a topology to decode the input file.
981745 (8976) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
981761 (8976) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
981761 (8976) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability
981761 (8976) - winsat\processresults.cpp:1405: No DX9 capability - limiting D3D Score to 1.0
981761 (8976) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
981792 (8976) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 7c59a34b-3fad-4d29-9f2a-da5579fa4fd7'
981807 (8976) - winsat\main.cpp:2855: > Power state restored.
981807 (8976) - winsat\main.cpp:2870: > Successfully reenabled EMD.
982010 (8976) - winsat\main.cpp:2896: > Composition restarted
982010 (8976) - winsat\watchdog.cpp:0311: Watch dog system shutdown
982010 (8976) - winsat\main.cpp:4909: > exit value = 1.

I was able to only get this to work if I went into the Bios ans set machine to use the nvidia ONLY the intel HD 4000 does not support WDDM? latest drivers installed

Could not complete the video frames to layers command because photoshop does not support video in th

When I attempt to import a video I get the message "could not complete the video frames to layers command because photoshop does not support video in this version of windows" I am running on windows 8.1 pro (32 bit), shouldn't this be compatible???????????

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

Windows not reconising video switcher

Similar Messages

Maybe you are looking for