Windows Not starting properly

Well Im trying to recover my Toshiba M115 is because ever single time i turn my laptop on it says. Windows is not loading properly. And you can either Start Windows Normaly which turns my screen complete black. LAst Known good Configuration which also makes my screen black. I can start in Safe mode(Command Prompt), Safe Mode with Networking, or Just Safe Mode. The Safe Mode ones turn my computer into a bunch of numbers and letters which moves for a little then stops. Any Help! I Have tried to recover it with my CD but all I get is more problems which I explained in another thread. PLEASE HELP
Yah im a Geek

I read your previous threads so I know what you are talking about. Bottom line is you are going to need to reimage the hard drive. Windows is not working in anyway you try. At the same time, your current Recovery CD is not working either. Was this computer serviced? Was the system board or hard drive replaced earlier? It could be that the tech that worked on the computer forgot to do something. If that is not the case, then I feel that the Recovery CD you are using is defective. Waiting several hours for the Recovery CD to finish is not normal. So maybe either the Recovery CD is bad or maybe there is some problem with the CD drive. Try installing a different copy of the operating system. If it installs it means that your Recovery CD could be bad. If not, maybe you have a bad DVD drive in the computer.

Similar Messages

My I Mac does not start properly without pressing option and apple keys ,and it freezes

My I Mac does not start properly without pressing option and apple keys ,and it freezes

Try any of the following:
http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Troubleshoot the spinning beach ball/freezing & crashing

BAM 11g Not starting properly

Hi,
I installed fmw 11.1.1.4 on 64 bit windows system.Everyting is working fine but while starting BAM managed server its not starting properly,
In em and WL the bam server is showing up state, but in deployed application oracle-bam is showing down state.
Any suggestion...
*I created the domain selecting all dev mode.
*I've one admin server where soa+osb running and one bam managed server.

Here is the excerpts from logs,
bam_server1 log
weblogic.application.ModuleException: [HTTP:101216]Servlet: "BamServer" failed to preload on startup in Web application: "/oracle/bam".
java.lang.ExceptionInInitializerError
     at oracle.bam.adc.kernel.viewsets.satellite.GenericSatellite.start(GenericSatellite.java:285)
     at oracle.bam.adc.kernel.server.ADCService.startService(ADCService.java:88)
     at oracle.bam.server.BamServer$ServiceEntry$1.run(BamServer.java:1717)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:47)
     at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:79)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.security.Security.runAs(Security.java:61)
     at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:48)
     at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:52)
     at oracle.bam.common.security.authentication.BamPrivilegedExceptionAction.execute(BamPrivilegedExceptionAction.java:153)
     at oracle.bam.common.security.authentication.BamPrivilegedExceptionAction.execute(BamPrivilegedExceptionAction.java:121)
     at oracle.bam.server.BamServer$ServiceEntry.start(BamServer.java:1722)
     at oracle.bam.server.BamServer.init(BamServer.java:272)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: oracle.bam.common.messaging.api.exception.StartFailedException: BAM-00553: Resources start operation for destination topic/oracle.bam.messaging.systemobjectnotification failed.
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.onStartFailedException(MessageOperationBase.java:1616)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1521)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1476)
     at oracle.bam.adc.kernel.viewsets.satellite.GenericSatellite.start(GenericSatellite.java:274)
     at oracle.bam.adc.kernel.server.ADCService.startService(ADCService.java:85)
     at oracle.bam.server.BamServer$ServiceEntry$1.run(BamServer.java:1716)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:47)
     at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:79)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.security.Security.runAs(Security.java:61)
     at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:48)
     at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:52)
     at oracle.bam.common.security.authentication.BamPrivilegedExceptionAction.execute(BamPrivilegedExceptionAction.java:153)
     at oracle.bam.common.security.authentication.BamPrivilegedExceptionAction.execute(BamPrivilegedExceptionAction.java:121)
     at oracle.bam.server.BamServer$ServiceEntry.start(BamServer.java:1722)
     at oracle.bam.server.BamServer.init(BamServer.java:272)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
bam_diagnostic
oracle.bam.common.messaging.api.exception.OpenFailedException: BAM-00533: Resource open for destination topic/oracle.bam.messaging.systemobjectnotification failed.
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenFailedException(MessageOperationBase.java:1272)
     at oracle.bam.common.messaging.api.MessageConsumerRegistry.onOpenFailedException(MessageConsumerRegistry.java:934)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.open(MessageOperationBase.java:1172)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.access$000(MessageOperationBase.java:72)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase$1.performOperation(MessageOperationBase.java:1152)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase$UtilityThread.run(MessageOperationBase.java:2545)
Caused by: oracle.bam.common.messaging.api.exception.RecoveryFailedException: BAM-00523: Resource recovery for destination topic/oracle.bam.messaging.systemobjectnotification failed.
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.onRecoveryFailedException(MessageOperationBase.java:2027)
     at oracle.bam.common.messaging.api.MessageConsumerRegistry.onRecoveryFailedException(MessageConsumerRegistry.java:953)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.recover(MessageOperationBase.java:1865)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenException(MessageOperationBase.java:1251)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1222)
     at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageConsumerRegistry.performOpen(INVMJMSMessageConsumerRegistry.java:132)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.open(MessageOperationBase.java:1163)
     ... 3 more
Caused by: oracle.bam.common.messaging.api.exception.RecoveryFailedException: BAM-00523: Resource recovery for destination topic/oracle.bam.messaging.systemobjectnotification failed.
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.performRecovery(MessageOperationBase.java:1979)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.recover(MessageOperationBase.java:1856)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenException(MessageOperationBase.java:1252)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1222)
     at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageConsumerRegistry.performOpen(INVMJMSMessageConsumerRegistry.java:133)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.open(MessageOperationBase.java:1163)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.access$000(MessageOperationBase.java:72)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase$1.performOperation(MessageOperationBase.java:1153)
     ... 1 more
Caused by: oracle.bam.common.messaging.api.MessageFrameworkException: BAM-00500: exception in messaging framework: BAM-00500: exception in messaging framework: null
     at oracle.bam.common.messaging.api.jms.JMSMessageConsumerRegistry.acquireResources(JMSMessageConsumerRegistry.java:769)
     at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1211)
     ... 5 more
Caused by: oracle.bam.common.messaging.api.MessageFrameworkException: BAM-00500: exception in messaging framework: null
     at oracle.bam.common.messaging.base.connection.jms.JMSConnectionFactory.newInstance(JMSConnectionFactory.java:336)
     at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.newInstance(JMSSharedConnectionFactory.java:279)
     at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.newInstance(JMSSharedConnectionFactory.java:55)
     at oracle.bam.common.messaging.base.connection.ConnectionFactoryBase.getInstance(ConnectionFactoryBase.java:84)
     at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.getInstance(JMSSharedConnectionFactory.java:149)
     at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.getInstance(JMSSharedConnectionFactory.java:55)
     at oracle.bam.common.messaging.api.jms.JMSMessageConsumerRegistry.acquireResources(JMSMessageConsumerRegistry.java:705)

When I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

If you are using Windows 7, go to:
Control Panel>Programs>Programs and Features
Look for a program called 'Apple Mobile Device Support'
Right-click on it
Click 'repair'
Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me.

"System Update could not start properly" - New error just started (WinXP SP3)

I can no longer run System Update; it displays the splash screen, then a small window pops up with the above error message. I just ran it last a day or two ago, and it installed a few things; since then I have also run Microsoft Update and it also installed a few things, which I backed out one at a time (except for the malicious software removal updates)--all to no avail. Anyone else seen this, any suggestions?
Thanks,
Jonathan
--T61 (6460-8VU) - WinXP SP3, all the latest patches (except for KB961260, which is still backed out); .NETFramework 3.5 SP1

Hello,
I have reinstalled the system update after I did clean and download the last version from Lenovo website but still have the same pop up message says: Syystem Update could not start properly.
what's wrong??????

System Update could not start properly

Have recently been getting this error: System Update could not start properly
It worked fine (even getting itself updated) for over a year that I've had the machine (a T-61, 14.1", 4G ram, 200G hd, nvidea, running XP Professional, SP3)
Any thoughts?
Message Edited by robpm on 03-11-2009 06:20 AM

Hi, deinstall the old TVSU This is a newer version, then the installed one..it works for me..
thats good for drivers and lenovo updates:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
For Windows updates i use this for offline Updates:
its in german language but the updater itself is in english for english windows versions:
(optional updates not included)
http://translate.google.de/translate?prev=_t&hl=de&ie=UTF-8&u=http%3A%2F%2Fwww.winhelpline.info%2Ffo...=
orig not translated
http://www.winhelpline.info/forum/winhelpline-postservice-pack-updater/125108-windows-xp-update-pack...
after install these two packages and run through... your S10e should be updated and updaters works as it should...
regards KalvinKlein
Message Edited by KalvinKlein on 03-28-2009 05:40 PM
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

IBook not starting properly

My iBook is not starting properly. The machine begins normally: gray screen to blue and a bar filling from left to right, but it does not move past this point. I understand how to re-install OS X for example, but I am reluctant to do that when it seems the problem is only in getting the wheels spinning... Help! What do you suggest?

Last question first, the command to shut down from Single-User Mode is:
shutdown now -h
Check out this Apple Knowledge Base article which addresses the exact problem you're seeing:
http://docs.info.apple.com/article.html?artnum=302411
DiskWarrior is likely your best bet for recovering your hard drive. Someone said it is available at Apple Stores, or you can use the online link I've provided here.
If you have another Mac, you may be able to access your hard drive via FireWire Target Disk Mode in order to retrieve your important files to the hard drive of the other Mac.
Good luck.

My macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

my macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

Hi..
Your profile indicates you are running Lion v10.7 so you need to use Lion Recovery to repair the startup disk if necessary or reinstall Mac OS X.

MIAW issue in windows not starting movies over

I have created a simple application that has a play and stop button in one window that activate another MIAW that plays a quicktime movie file. On a MAC when I click play it starts the video from the beginning and when I click the stop button its stops the video. If I click my play button again it opens the video in a separate window again and starts from the beginning. On windows when I click play and stop it functions the same however, if I click play again the video does not start over. The video keeps playing invisibly in the background or something and clicking the play button just resumes the video visibly from where it was currently still playing. Does anyone know how I can get the video to start over on a windows platform?

I figured out that if I use a "forget" command it will accomplish the task but it would be more beneficial to keep the videos in memory. Please note that I am fairly new to Director.
This is a script that starts on the main movie to launch a looping video commercial on the larger tv
on startmovie
window().new("looping commercial").open()
window("looping commercial").rect = rect(0, 0, 800, 600)
window("looping commercial").resizable=FALSE
end
This is the scripting behavior attached to the "play" button that you would press. This stops the looping commercial and then plays a 3 minute informercial.
on mouseUp
--opens the spectracide move for play in larger monitor
window().new("Spectracide").open()
window("Spectracide").rect = rect(0, 0, 800, 600)
window("Spectracide").resizable=FALSE
--closes the looping commercial that was loaded at the start of the application
window("looping commercial").close()
-- plays a sound in channel 1
sound(1).play(member("play1"))
end
This is the script behavior attached to the "stop" button that turns off the infomercial and goes back to the looping commercial on the large tv.
on mousedown
--closes the spectracide video that was executed when the play button was pressed
window("Spectracide").close()
--opens the looping commercial
window().new("looping commercial").open()
window("looping commercial").rect = rect(0, 0, 800, 600)
window("looping commercial").resizable=FALSE
end

[SOLVED] samba does not start properly again -this time with systemd

Definitely no luck with this one...
So, today I've switched to a pure systemd init system, and noticed that I have this old issue again.
(Link to my old thread: https://bbs.archlinux.org/viewtopic.php?id=142704)
Samba doesn't start properly again, more precisely smbd is launched but not nmbd, so samba is not working as it should (for example smbtreee lists nothing).
Last time I've solved it by putting samba long before networkmanager in the daemons array, but with systemd I'm a bit confused...
Anyone has this issue?
Last edited by scar (2012-11-03 07:05:42)

I think that nmbd isn't waiting for networkmanager to start on my system, because I'm getting journal entries like
Oct 31 00:47:21 spacebar winbindd[431]: [2012/10/31 00:47:21.556005, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:21 spacebar systemd[1]: nmbd.service: main process exited, code=exited, status=1
Oct 31 00:47:21 spacebar systemd[1]: Unit nmbd.service entered failed state.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): carrier now ON (device state 20)
Oct 31 00:47:22 spacebar kernel: r8169 0000:03:00.0: eth0: link up
Oct 31 00:47:22 spacebar kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Auto-activating connection 'Static'.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) starting connection 'Static'
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Oct 31 00:47:22 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started...
Oct 31 00:47:22 spacebar rpc.mountd[462]: Version 1.2.6 starting
Oct 31 00:47:22 spacebar systemd[1]: Startup finished in 3s 850ms 155us (kernel) + 21s 279ms 972us (userspace) = 25s 130ms 127us.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Oct 31 00:47:23 spacebar ntpd_intres[441]: DNS 0.au.pool.ntp.org -> 116.66.160.39
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Policy set 'Static' (eth0) as default for IPv4 routing and DNS.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) successful, device activated.
Oct 31 00:47:23 spacebar NetworkManager[391]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete.
Oct 31 00:47:23 spacebar dbus[401]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.771872, 0] param/loadparm.c:7969(lp_do_parameter)
Oct 31 00:47:20 spacebar smbd[428]: Ignoring unknown parameter "user client driver"
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.794252, 0] lib/interface.c:543(load_interfaces)
Oct 31 00:47:20 spacebar smbd[428]: WARNING: no network interfaces found
Oct 31 00:47:20 spacebar smbd[428]: [2012/10/31 00:47:20.805126, 0] smbd/server.c:1109(main)
Oct 31 00:47:20 spacebar smbd[428]: standard input is not a socket, assuming -D option
Oh, this started happening after putting a MUCH faster cpu and motherboard in the system, so maybe there's a race-condition there?
Last edited by MisterAnderson (2012-10-30 04:59:46)

[SOLVED] samba does not start properly

I have three machines ( desktop, laptop, and a mini-itx "homeserver" ), and I use samba shares on all the three machines.
The homeserver is headless, does not have a DE, and launches samba properly any time.
On the other machines, the samba service launches ( I can see it on the screen as arch starts ) but does not really start.
I found that smbd is always running, but nmbd never starts when arch starts up.
When the startup is complete, I type "/etc/rc.d/samba restart", and it launches the samba service properly, on both machines.
The smb.conf file is identic on all the machines, except for the server string and the specific machine's share location/name
What can be wrong? Why does nmbd not start on both machines? (Or why does it on the third?)
Last edited by scar (2012-07-12 13:57:46)

Samba is in my daemons array in rc.conf. I've already tried to start it in backround too ( @ ). Did not work.
I've already tried the /etc/rc.local thing, but not with a sleep before the service start command.
Will try it.
Currently I'm using my laptop ( Wicd, not networkmanager , and the first post (skrooge) did not work.
I'll try it this evening with nm.

Menu windows not displaying properly in Acrobat 11 STD

When I try to print any PDF file (clicking File->Print) the Print Menu that opens is missing all text in the window incl all buttons. I tried installing a separate Adobe Reader in local Danish language just to test the application but this was worse. So uninstalled and sticking to Acrobat.
I also tried click File->Properties and this is also not displaying properly.
I fear this has something to do with Microsoft compatibility, but I don't know. I have MS Windows 7 Pro SP1 installed.
The good news is I can guess the bottom 2 buttons - 'OK' (left button) and 'Cancel' (right button) which at least allows me to print in the default preferences.
Any ideas how to fix? I have the latest update installed.

I have been working together with Adobe support team to solve this. After multiple rootcauses we found the issue.
The issue was caused by not having the default windows font 'Segoe UI' installed. Sounds strange that Win 7 does not come with the font that is used by this application but the tip worked.
Google a website to download the font from, I used 'Fontpalace.com' - install the font - and voila the issue is solved.

Jar file not starting properly when in dir with name 2 or more words

Hello,
I have a pretty weird problem here. When I start my jar file from a directory like Test/MyJar.jar everything is fine. But if I try to start it from Test 1/MyJar.jar the file is not running properly. The jar file reads files from it's directory and the message I receive is can't find Test20%1/MyFile.txt.
Any help will be appreciated.

Anyway. Probably the easiest thing is to not read from the directory. Rather, put the files you need to read into the Jar file itself, and read them using Class.getResourceAsStream.
This is a workaround, but it's a good one.

I purchased the gaming app from app store and I used it for some time but now suddenly the app is not working properly it's not starting properly and just dies down after the start and comes Back to homepage need help please guys help me out with this!

Guys needed your help with my real racingHD game app it's not working properly even after paying for it I don't know why it's not working having trouble with it cause it won't star smooth need help guys

Read Mitch's post on the sad ipod in this thread:
http://discussions.apple.com/message.jspa?messageID=2369954#2369954

Soa server not start properly

while starting my soa server its giving me following issue, I have created a new environment..
can any one give me idea what should i check.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
ORABPEL-35010
Unable to Encrypt data.
Unable to Encrypt data.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
at oracle.bpel.services.common.util.EncryptionService.encrypt(EncryptionService.java:58)
at oracle.bpel.services.workflow.verification.impl.VerificationService.encryptString(VerificationService.java:23
36)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createTokenFromMap(VerificationService.ja
va:2094)
at oracle.bpel.services.workflow.verification.impl.VerificationService.getInternalContextToken(VerificationServi
ce.java:403)
at oracle.bpel.services.workflow.verification.impl.VerificationService.getInternalContext(VerificationService.ja
va:430)
at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:367)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100)
at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy
.java:61)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowire
CapableBeanFactory.java:877)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutow
ireCapableBeanFactory.java:839)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCap
ableBeanFactory.java:440)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBea
nFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegis
try.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCap
ableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBea
nFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegis
try.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCap
ableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBea
nFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegis
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Apr 18, 2011 11:57:49 AM PDT> <Error> <oracle.soa.services.workflow.verification> <BEA-000000> <<.> bootstrup error: Un
able to Encrypt data.
Unable to Encrypt data.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
its asking to check post installation steps, but i did the same thing as previous installation...
thanks in advance

Hi,
first shutdown the servers and then log-in as SYSTEM in your database. Then execute the following commands after you replace PARRUN_SOAINFRA with the name of your local SOA INFRA schema:
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."EDN_EVENT_QUEUE_TABLE"',purge_condition => 'qtview.queue=''AQ$_EDN_EVENT_QUEUE_TABLE_E''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."EDN_OAOO_DELIVERY_TABLE"',purge_condition => 'qtview.queue=''AQ$_EDN_OAOO_DELIVERY_TABLE_E''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."IP_QTAB"',purge_condition => 'qtview.queue=''AQ$_IP_QTAB_E''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."EDN_EVENT_QUEUE_TABLE"',purge_condition => 'qtview.queue=''EDN_EVENT_QUEUE''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."EDN_OAOO_DELIVERY_TABLE"',purge_condition => 'qtview.queue=''EDN_OAOO_QUEUE''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."IP_QTAB"',purge_condition => 'qtview.queue=''IP_IN_QUEUE''',purge_options => po);
end;
declare po dbms_aqadm.aq$_purge_options_t;
begin
po.block := true;
dbms_aqadm.purge_queue_table(queue_table => '"PARRUN_SOAINFRA"."IP_QTAB"',purge_condition => 'qtview.queue=''IP_OUT_QUEUE''',purge_options => po);
end;
commit;
Finally start the servers and wait to see if soa suite will start properly. Hopefully it will work for you too.
regards

Windows Not starting properly

Similar Messages

Maybe you are looking for