Windows NT filesystem problem

would you helping me how to use paragorn ntfs?
i need to copy my wd external hard drive to my macbook
this is my hard drive info:
Type :           Partition
          Disk Identifier :           disk1s1
          Mount Point :           /Volumes/.....MMD.....
          File System :           Windows NT Filesystem
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
          Writable :           Yes
          Universal Unique Identifier :           0EC3E502-12C0-4682-9101-0E990FEFD4EF
          Capacity :           1 TB (1,000,169,537,536 Bytes)
          Free Space :           59.68 GB (59,683,647,488 Bytes)
          Used :           940.49 GB (940,485,885,952 Bytes)
          Number of Files :           68,575
          Number of Folders :           0
          Owners Enabled :           Yes
          Can Turn Owners Off :           No
          Can Repair Permissions :           No
          Can Be Verified :           Yes
          Can Be Repaired :           Yes
          Can Be Formatted :           Yes
          Bootable :           No
          Supports Journaling :           No
          Journaled :           No
          Disk Number :           1
          Partition Number :           1
please help me read the hard drive and copy them to my mac:(

Did you install Paragon driver ? does the drive mount (it won't show on desktop unless you tell the Finder to do so). Or does it show in Disk Utility? it should.
Your drive is rather overly full with only 5-6% free, not good.
You are not in forum for notebook users.
There really isn't anything to do to use Paragon NTFS for OS X other than the req'd restart after installing, which it will request or force.

Similar Messages

  • I have lightroom 5 with 5.7 updated.   I use windows.  My problem is with the spot healer or remover.  It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

    I have lightroom 5 with 5.7 verson updated.  I use windows.  My problem is with the spot healer or remover in the develop.  It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up.  I uninstalled the software and re installed it again but it didn't fix the problem and its still the same.  Help please.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • TS3074 im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    Try the following user tip:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

  • Elem 4.0 in Windows 7 without problems ?

    Is it possible tun run Photoshop Elem 4.0 in Windows 7 without problems ?
    Warnings about compability problems.

    Please refer to this related post
    http://forums.adobe.com/message/4964761#4964761

  • Windows file permissions problems

    We have an Xserve G5 that was running Server 10.3. I upgraded it directly to Server 10.5. Since then, I am having problems with some of our Windows users.
    When they create a new folder, it puts them as the owner, but gives them NO rights. I am using ACLs to give full rights to the group that needs access, and also setting the POSIX group rights to read/write. So once they leave that folder, they can no longer get back in. I have SMB set to inherit rights from the parent, and the ACL is set to inherit as well. Other people in the group can access the folder, just not the owner! I change the owner permissions and all is well (for that folder at least). How do I need to set SMB so it follows the inheritance I set?
    Once I have the folder set correctly, any new files created there have the POSIX group set to read only. The ACL inherits properly and still has full control. The owner is set correctly, usually. It is not consistent.
    Once someone creates a file in any folder, if a Windows user modifies a file someone else created, it changes the owner name and gives them no rights. It also creates a new ACL record. If the original owner was a Mac user, it creates a new explicit ACL with all rights except execute and delete. If the file has ACL records already, it duplicates them and gives whatever rights it feels like (it seems). One new record may say Allow Delete only, and the next one say Allow Read except for execute. The only thing for certain is it will never match the original ACL. It always adds the new ACLs at the top of the list, and the duplicates are grayed out as if they were actually inherited that way. The most 'popular' file I've found so far had 128 "inherited" ACL records!
    It is also denying access to some folders that the user has the correct permissions for. For instance, I can create/modify/delete files logged in on the Mac side, but when I log in on Windows, I have problems accessing files/folders. It shows everything as read only. Even if I change the properties in Windows, it will revert back to read-only when I apply the change.
    We have a new Xserve that we will be moving the file services to. At that time, all the Windows users will be moved completely to the Mac side - currently the Windows users are accessing the Xserve and a Novell server.
    Thanks in advance for any help.

    Hi Thy,
    Based on my research, the Trusted Installer is a service, for those resources which only allow Trusted Installer to modify, neither Administrator nor System can modify them.
    I am wondering that how secure the network and physical environment is that you need to create a GPO to prevent users making permissions changes on system files. These system files normally only can be modified by Administrators,
    System or Trusted Installer, which is secure enough when we don’t add users we don’t trust enough to Administrators group.
    >What is the best way to undo this while leaving the audit failures turned on and still retaining the correct permissions on all the files?
    As long as administrators on these machines are qualified, you can remove the Group Policy. If not, please don’t make any user you don’t trust as Administrator.
    >What happens to the files that aren't owned trustedinstalled than now have the trustedinstaller default permissions under system32 and syswow64 if I were to remove the gpo?  What file  permissions would be retained?
    We should keep the default permissions, if those files weren’t owned by Trusted Installer before, we should change the original owner back, vice versa.
    Here are some related articles below I suggest you refer to:
    New ACLs Improve Security in Windows Vista
    http://technet.microsoft.com/en-us/magazine/2007.06.acl.aspx
    SYSK 277: How-To Bring Back the TrustedInstaller
     http://blogs.msdn.com/b/irenak/archive/2007/01/30/sysk-277-how-to-bring-back-the-trustedinstaller.aspx
    Best Regards,
    Amy

  • ISight - connects with windows users no problem?

    I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

    It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
    I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
    The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
    I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
    Skype has a video plugin (only for Windows)
    Yahoo! Messenger does not have voice yet (2.5.3)
    MSN is badmouthing because of the "M"
    I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
    The best two alternatives I found are:
    a) AIM 5.9
    b) Trillian (www.trillian.cc)
    Both use a free AIM screen name.
    AIM works fine, see also EZJim pages.
    TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
    The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
    TrillianBase is free but has no Video capabilities. The Pro version is 25$.
    Regards Coen
    ps. if you want to test your setup use my AIM screenname: coenjeukens

  • TS3297 when i try to open itunes store error comes up saying windows experienced a problem and program stopped working

    can some help me everytime I try to open itunes store an error comes up saying windows experienced a problem and program stopped working. Itunes opens this just happens when I go to the store

    Hello Ducati848,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    You might get some help over on the shuffle discussions.
    http://discussions.apple.com/forum.jspa?forumID=822

  • FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

    FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

    You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
    * for information on the options available see [[Updating firefox]] <--- clickable link ---

  • Mat****a UJ-8315: Error message - windows found a problem

    I'm trying to copy a film to a dvd/cd and the windows always display the message: windows found a problem.....what might be wrong ?

    Hi
    Usually its not possible to copy the original DVD movies with the simply burning application because of the copy protection.
    Did you get also this same error message if you will copy simple files on the CD or DVD? If not so I assume the medias are copy protected and therefore its not possible to burn the medias.
    The second possibility is that you use not compatible medias. Usually in the user manual of your notebook you will find a list of tested and supported medias which should work properly.

  • I bought a scanner Fujitsu (model sv600) in which is delivered a CD of installation of Acrobat 11 for Windows. The problem is that I possess an iMac. How can it be done?

    I bought a scanner Fujitsu (model sv600) in which is delivered a CD of installation of Acrobat 11 for Windows. The problem is that I possess an iMac. How can it be done?

    This page ScanSnap SV600 : Fujitsu Global shows that Acrobat is for Windows, not for Mac. There is no trade-up option so far as I know. Indeed, Acrobat Standard does not exist for Mac at all, only Acrobat Pro. Which you could buy.
    Or, you can invest in Parallels Desktop which will allow you to run Windows apps on your Mac.

  • How to fix windows 7 sound problem

    Hello, I've been searching all over the internet for a solution on how to fix a windows 7 sound problem. I'm running it on bootcamp ,but There's absolutely no sound to it. Is there anyone that can please help me?

    Hi;I followed your instructions but still it is the same!
    Regards
          From: Pat Willener <[email protected]>
    To: Said Ahghari <[email protected]>
    Sent: Saturday, 10 January 2015, 3:58
    Subject:  How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    created by Pat Willener in Adobe Reader - View the full discussionEven more strange!  The only thing I can think of is a complete uninstall/reinstall. Download, unzip, and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7082910#7082910 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7082910#7082910 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Windows 2000 boot problem

    I have just moved my system to the new MX-6585 board - Did an Windows 2000 "upgrade" to initiate total hardware scan.
    System works ok, when it has booted, but booting is sooo slow.
    Found a Microsoft article describing the problem:
    SYMPTOMS
    After you choose to start Windows from the Boot menu, you may experience a long delay (or pause) before your computer finishes starting. Note that this delay may range from 10 seconds to a minute. Also, this delay occurs before the Starting Windows progress bar appears, and your computer may appear to stop responding (hang) during this time.
    CAUSE
    This behavior can occur if Windows is installed on a drive or a partition to which Windows cannot gain access with normal Basic Input/Output System (BIOS) INT-13 or INT-13 extension calls. When Windows Setup determines it cannot use BIOS calls to start, it uses scsi() or signature() syntax in the Boot.ini file instead of multi() syntax.
    My question is: Does MX-6585/BIOS in any way hinder the INT-13 calls to my Adaptec 2940???

    Thanks! I sent the following message:
    There are no IDE devices in my system, only SCSI. My hd is an IBM Ultrastar 36XP DRHS-36D. When I start the system up, the SCSI & MSI BIOS screens display normally, then BOOT.INI appears. After I select one of my NT-type OS's (NT4, W2K, WXP), there is a 30-second delay between the time I press the Enter key at the BOOT.INI screen and the time the OS actually starts to boot. (The BOOT.INI countdown time is limited to 5 seconds. I am *not* talking about this time.)
    Since the same hardware was transferred from another installation (with a non-MSI mb) in which the same Adaptec drivers were used but this 30-second delay did not occur, the delay appears to be due to the MSI BIOS. Interestingly, W98 is also installed on this hd and it appears in the BOOT.INI list. When I start up W98, the 30-second delay does not occur -- as soon as I press the Enter key, W98 starts to boot.
    Other end users have complained about this same boot delay. See the post "Windows 2000 boot problem" found in the MSI user forum here: http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=6970&boardid=10&page=1
    I'd estimate our chances of success at 1%. Still, it's far better to complain and not be heard than never complain. That way, we get to complain even more.  

  • Read only filesystem problem

    Hi,
    I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
    If i tried to remount it read-write using command
    mount -o remount,rw /
    i got this:
    sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
    mount: /dev/mapper/VG0-archlinux2: can't read superblock
    Only reboot helps.
    my machine is (uname -a):
    Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
    /etc/mtab (when problem occured):
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
    run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sda1 /boot ext2 rw,relatime 0 0
    /dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
    binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
    gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
    dmesg output is this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
    [ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
    [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000130000000 aka 4864M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
    [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
    [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
    [ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000cfee0000 00040
    [ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
    [ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048175
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.003333] Fast TSC calibration using PIT
    [ 0.006666] Detected 2813.035 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000031] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002140] Mount-cache hash table entries: 256
    [ 0.002315] Initializing cgroup subsys cpuacct
    [ 0.002317] Initializing cgroup subsys memory
    [ 0.002326] Initializing cgroup subsys devices
    [ 0.002327] Initializing cgroup subsys freezer
    [ 0.002328] Initializing cgroup subsys net_cls
    [ 0.002330] Initializing cgroup subsys blkio
    [ 0.002349] tseg: 00cff00000
    [ 0.002351] CPU: Physical Processor ID: 0
    [ 0.002352] CPU: Processor Core ID: 0
    [ 0.002353] mce: CPU supports 6 MCE banks
    [ 0.002358] LVT offset 0 assigned for vector 0xf9
    [ 0.002362] using AMD E400 aware idle routine
    [ 0.002998] ACPI: Core revision 20120320
    [ 0.019730] ftrace: allocating 17970 entries in 71 pages
    [ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
    [ 0.165799] Performance Events: AMD PMU driver.
    [ 0.165802] ... version: 0
    [ 0.165803] ... bit width: 48
    [ 0.165803] ... generic registers: 4
    [ 0.165804] ... value mask: 0000ffffffffffff
    [ 0.165805] ... max period: 00007fffffffffff
    [ 0.165806] ... fixed-purpose events: 0
    [ 0.165807] ... event mask: 000000000000000f
    [ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.199154] Booting Node 0, Processors #1 #2
    [ 0.235675] Brought up 3 CPUs
    [ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
    [ 0.239344] devtmpfs: initialized
    [ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.241490] NET: Registered protocol family 16
    [ 0.241574] node 0 link 0: io port [c000, ffff]
    [ 0.241576] TOM: 00000000d0000000 aka 3328M
    [ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
    [ 0.241580] node 0 link 0: mmio [a0000, bffff]
    [ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
    [ 0.241588] TOM2: 0000000130000000 aka 4864M
    [ 0.241589] bus: [00, 03] on node 0 link 0
    [ 0.241590] bus: 00 [io 0x0000-0xffff]
    [ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
    [ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
    [ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
    [ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
    [ 0.241649] ACPI: bus type pci registered
    [ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252350] PCI: Using configuration type 1 for base access
    [ 0.252819] bio: create slab <bio-0> at 0
    [ 0.252870] ACPI: Added _OSI(Module Device)
    [ 0.252871] ACPI: Added _OSI(Processor Device)
    [ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253366] ACPI: EC: Look up EC in DSDT
    [ 0.258796] ACPI: Interpreter enabled
    [ 0.258802] ACPI: (supports S0 S3 S4 S5)
    [ 0.258819] ACPI: Using IOAPIC for interrupt routing
    [ 0.261632] ACPI: No dock devices found.
    [ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [ 0.261768] PCI host bridge to bus 0000:00
    [ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
    [ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
    [ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
    [ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    [ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
    [ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [ 0.262309] pci 0000:00:12.2: supports D1 D2
    [ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.262590] pci 0000:00:13.2: supports D1 D2
    [ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
    [ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
    [ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
    [ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
    [ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.269300] pci 0000:02:00.0: supports D1 D2
    [ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
    [ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
    [ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
    [ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [ 0.276136] pci 0000:03:0e.0: supports D1 D2
    [ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
    [ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.283252] vgaarb: loaded
    [ 0.283253] vgaarb: bridge control possible 0000:01:00.0
    [ 0.283281] PCI: Using ACPI for IRQ routing
    [ 0.291632] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
    [ 0.291778] NetLabel: Initializing
    [ 0.291779] NetLabel: domain hash size = 128
    [ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291789] NetLabel: unlabeled traffic allowed by default
    [ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.293841] Switching to clocksource hpet
    [ 0.298189] pnp: PnP ACPI init
    [ 0.298200] ACPI: bus type pnp registered
    [ 0.298257] pnp 00:00: [bus 00-ff]
    [ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.298303] pnp 00:01: [io 0x0010-0x001f]
    [ 0.298304] pnp 00:01: [io 0x0022-0x003f]
    [ 0.298306] pnp 00:01: [io 0x0044-0x005f]
    [ 0.298307] pnp 00:01: [io 0x0062-0x0063]
    [ 0.298308] pnp 00:01: [io 0x0065-0x006f]
    [ 0.298310] pnp 00:01: [io 0x0074-0x007f]
    [ 0.298311] pnp 00:01: [io 0x0091-0x0093]
    [ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.298316] pnp 00:01: [io 0x0220-0x0225]
    [ 0.298317] pnp 00:01: [io 0x0290-0x0294]
    [ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
    [ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298785] pnp 00:02: [io 0x4100-0x411f]
    [ 0.298789] pnp 00:02: [io 0x0228-0x022f]
    [ 0.298791] pnp 00:02: [io 0x040b]
    [ 0.298792] pnp 00:02: [io 0x04d6]
    [ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.298794] pnp 00:02: [io 0x0c14]
    [ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
    [ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
    [ 0.298798] pnp 00:02: [io 0x0c6f]
    [ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
    [ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
    [ 0.298804] pnp 00:02: [io 0x4210-0x4217]
    [ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
    [ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
    [ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
    [ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
    [ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
    [ 0.298889] system 00:02: [io 0x040b] has been reserved
    [ 0.298891] system 00:02: [io 0x04d6] has been reserved
    [ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.298894] system 00:02: [io 0x0c14] has been reserved
    [ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
    [ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.298899] system 00:02: [io 0x0c6f] has been reserved
    [ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
    [ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
    [ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
    [ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
    [ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298986] pnp 00:03: [dma 4]
    [ 0.298988] pnp 00:03: [io 0x0000-0x000f]
    [ 0.298989] pnp 00:03: [io 0x0080-0x0090]
    [ 0.298991] pnp 00:03: [io 0x0094-0x009f]
    [ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.299038] pnp 00:04: [irq 0 disabled]
    [ 0.299049] pnp 00:04: [irq 8]
    [ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.299088] pnp 00:05: [io 0x0070-0x0073]
    [ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.299114] pnp 00:06: [io 0x0061]
    [ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.299147] pnp 00:07: [irq 13]
    [ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
    [ 0.299272] pnp 00:08: [io 0x03f7]
    [ 0.299279] pnp 00:08: [irq 6]
    [ 0.299281] pnp 00:08: [dma 2]
    [ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
    [ 0.299445] pnp 00:09: [irq 4]
    [ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.299507] pnp 00:0a: [io 0x0060]
    [ 0.299509] pnp 00:0a: [io 0x0064]
    [ 0.299516] pnp 00:0a: [irq 1]
    [ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
    [ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
    [ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
    [ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
    [ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
    [ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.299768] pnp: PnP ACPI: found 13 devices
    [ 0.299769] ACPI: ACPI bus type pnp unregistered
    [ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
    [ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
    [ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306249] NET: Registered protocol family 2
    [ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.309859] TCP: reno registered
    [ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309974] NET: Registered protocol family 1
    [ 0.710572] pci 0000:01:00.0: Boot video device
    [ 0.710585] PCI: CLS 4 bytes, default 64
    [ 0.710637] Unpacking initramfs...
    [ 0.774193] Freeing initrd memory: 3700k freed
    [ 0.776235] PCI-DMA: Disabling AGP.
    [ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.776307] PCI-DMA: using GART IOMMU.
    [ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.779581] LVT offset 1 assigned for vector 0x400
    [ 0.779589] IBS: LVT offset 1 assigned
    [ 0.779613] perf: AMD IBS detected (0x0000001f)
    [ 0.779743] audit: initializing netlink socket (disabled)
    [ 0.779753] type=2000 audit(1348861535.663:1): initialized
    [ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.790783] VFS: Disk quotas dquot_6.5.2
    [ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.790894] msgmni has been set to 7909
    [ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.791075] io scheduler noop registered
    [ 0.791076] io scheduler deadline registered
    [ 0.791112] io scheduler cfq registered (default)
    [ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.791449] GHES: HEST is not enabled!
    [ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.833141] Linux agpgart interface v0.103
    [ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.833378] mousedev: PS/2 mouse device common for all mice
    [ 0.833425] rtc_cmos 00:05: RTC can wake from S4
    [ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.833577] cpuidle: using governor ladder
    [ 0.833578] cpuidle: using governor menu
    [ 0.833689] drop_monitor: Initializing network drop monitor service
    [ 0.833749] TCP: cubic registered
    [ 0.833835] NET: Registered protocol family 10
    [ 0.833965] NET: Registered protocol family 17
    [ 0.833973] Key type dns_resolver registered
    [ 0.834070] PM: Hibernation image not present or could not be loaded.
    [ 0.834076] registered taskstats version 1
    [ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
    [ 0.835479] Freeing unused kernel memory: 760k freed
    [ 0.835631] Write protecting the kernel read-only data: 8192k
    [ 0.839453] Freeing unused kernel memory: 1488k freed
    [ 0.841313] Freeing unused kernel memory: 612k freed
    [ 0.848497] systemd-udevd[70]: starting version 189
    [ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.861403] Floppy drive(s): fd0 is 1.44M
    [ 0.868797] ACPI: bus type usb registered
    [ 0.868817] usbcore: registered new interface driver usbfs
    [ 0.868825] usbcore: registered new interface driver hub
    [ 0.868995] usbcore: registered new device driver usb
    [ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.869785] QUIRK: Enable AMD PLL fix
    [ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [ 0.871224] SCSI subsystem initialized
    [ 0.872843] libata version 3.00 loaded.
    [ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.877278] hub 1-0:1.0: USB hub found
    [ 0.877281] hub 1-0:1.0: 6 ports detected
    [ 0.878035] FDC 0 is a post-1991 82077
    [ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.887266] hub 2-0:1.0: USB hub found
    [ 0.887269] hub 2-0:1.0: 6 ports detected
    [ 0.887719] ahci 0000:00:11.0: version 3.0
    [ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 0.888332] scsi0 : ahci
    [ 0.888396] scsi1 : ahci
    [ 0.888447] scsi2 : ahci
    [ 0.888494] scsi3 : ahci
    [ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [ 0.944618] hub 3-0:1.0: USB hub found
    [ 0.944624] hub 3-0:1.0: 3 ports detected
    [ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [ 1.001279] hub 4-0:1.0: USB hub found
    [ 1.001285] hub 4-0:1.0: 3 ports detected
    [ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [ 1.057932] hub 5-0:1.0: USB hub found
    [ 1.057938] hub 5-0:1.0: 3 ports detected
    [ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [ 1.114589] hub 6-0:1.0: USB hub found
    [ 1.114595] hub 6-0:1.0: 3 ports detected
    [ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [ 1.171271] hub 7-0:1.0: USB hub found
    [ 1.171277] hub 7-0:1.0: 2 ports detected
    [ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
    [ 1.373774] ata2: softreset failed (device not ready)
    [ 1.373843] ata2: applying PMP SRST workaround and retrying
    [ 1.373866] ata1: softreset failed (device not ready)
    [ 1.373934] ata1: applying PMP SRST workaround and retrying
    [ 1.425928] hub 2-4:1.0: USB hub found
    [ 1.426276] hub 2-4:1.0: 4 ports detected
    [ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
    [ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.542034] ata1.00: configured for UDMA/133
    [ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
    [ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
    [ 1.565919] ata2.00: configured for UDMA/100
    [ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
    [ 1.570090] scsi4 : pata_atiixp
    [ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.571032] scsi5 : pata_atiixp
    [ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.583928] sda: sda1 sda2 sda3 sda4
    [ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
    [ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
    [ 1.780391] Switching to clocksource tsc
    [ 1.850813] usbcore: registered new interface driver usbhid
    [ 1.850814] usbhid: USB HID core driver
    [ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
    [ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
    [ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
    [ 1.925431] device-mapper: uevent: version 1.0.3
    [ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
    [ 2.294160] REISERFS (device dm-3): using ordered data mode
    [ 2.294161] reiserfs: using flush barriers
    [ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
    [ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
    [ 3.521243] systemd-udevd[196]: starting version 192
    [ 3.731543] vboxdrv: Found 3 processor cores.
    [ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
    [ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
    [ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.078340] ACPI: Power Button [PWRB]
    [ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.078391] ACPI: Power Button [PWRF]
    [ 4.118249] wmi: Mapper loaded
    [ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
    [ 4.266129] EDAC MC: Ver: 2.1.0
    [ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
    [ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
    [ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
    [ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
    [ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.460371] MCE: In-kernel MCE decoding enabled.
    [ 4.461269] AMD64 EDAC driver v3.4.0
    [ 4.461326] EDAC amd64: DRAM ECC disabled.
    [ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
    [ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
    [ 5.157960] kvm: Nested Virtualization enabled
    [ 5.157964] kvm: Nested Paging enabled
    [ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
    [ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
    [ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
    [ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
    [ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 5.445767] microcode: CPU0: patch_level=0x01000086
    [ 5.513053] ath: EEPROM regdomain: 0x809c
    [ 5.513060] ath: EEPROM indicates we should expect a country code
    [ 5.513064] ath: doing EEPROM country->regdmn map search
    [ 5.513067] ath: country maps to regdmn code: 0x52
    [ 5.513070] ath: Country alpha2 being used: CN
    [ 5.513073] ath: Regpair used: 0x52
    [ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.720419] microcode: CPU1: patch_level=0x01000086
    [ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.721373] microcode: CPU2: patch_level=0x01000086
    [ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
    [ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.296714] Disabling lock debugging due to kernel taint
    [ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
    [ 6.321474] Linux media interface: v0.10
    [ 6.384863] Linux video capture interface: v2.00
    [ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
    [ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
    [ 6.469404] usbcore: registered new interface driver uvcvideo
    [ 6.469407] USB Video Class driver (1.1.1)
    [ 7.020908] usbcore: registered new interface driver snd-usb-audio
    [ 7.051400] set resolution quirk: cval->res = 384
    [ 8.232297] reiserfs: enabling write barrier flush mode
    [ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
    [ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.462516] wlan0: authenticated
    [ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
    [ 11.471130] wlan0: associated
    [ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
    [ 27.419761] fuse init (API version 7.19)
    [ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
    [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    [ 2088.845667] ata1: SError: { HostInt Handshk }
    [ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845694] ata1.00: status: { DRDY }
    [ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845716] ata1.00: status: { DRDY }
    [ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845737] ata1.00: status: { DRDY }
    [ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845758] ata1.00: status: { DRDY }
    [ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845779] ata1.00: status: { DRDY }
    [ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845800] ata1.00: status: { DRDY }
    [ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845820] ata1.00: status: { DRDY }
    [ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845841] ata1.00: status: { DRDY }
    [ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845862] ata1.00: status: { DRDY }
    [ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845883] ata1.00: status: { DRDY }
    [ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845905] ata1.00: status: { DRDY }
    [ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845927] ata1.00: status: { DRDY }
    [ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845947] ata1.00: status: { DRDY }
    [ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845970] ata1.00: status: { DRDY }
    [ 2088.845978] ata1: hard resetting link
    [ 2089.329937] ata1: softreset failed (device not ready)
    [ 2089.329948] ata1: applying PMP SRST workaround and retrying
    [ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2089.498245] ata1.00: configured for UDMA/133
    [ 2089.509941] sd 0:0:0:0: [sda]
    [ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.509956] sd 0:0:0:0: [sda]
    [ 2089.509959] Sense Key : 0xb [current] [descriptor]
    [ 2089.509966] Descriptor sense data with sense descriptors (in hex):
    [ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.509987] 1a 07 b2 c7
    [ 2089.509996] sd 0:0:0:0: [sda]
    [ 2089.509999] ASC=0x0 ASCQ=0x0
    [ 2089.510004] sd 0:0:0:0: [sda] CDB:
    [ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
    [ 2089.510021] end_request: I/O error, dev sda, sector 436711063
    [ 2089.510032] Buffer I/O error on device dm-3, logical block 631
    [ 2089.510035] lost page write due to I/O error on dm-3
    [ 2089.510058] sd 0:0:0:0: [sda]
    [ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510066] sd 0:0:0:0: [sda]
    [ 2089.510068] Sense Key : 0xb [current] [descriptor]
    [ 2089.510073] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510091] 1a 07 b2 c7
    [ 2089.510099] sd 0:0:0:0: [sda]
    [ 2089.510101] ASC=0x0 ASCQ=0x0
    [ 2089.510106] sd 0:0:0:0: [sda] CDB:
    [ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
    [ 2089.510121] end_request: I/O error, dev sda, sector 436711095
    [ 2089.510126] Buffer I/O error on device dm-3, logical block 635
    [ 2089.510129] lost page write due to I/O error on dm-3
    [ 2089.510140] sd 0:0:0:0: [sda]
    [ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510146] sd 0:0:0:0: [sda]
    [ 2089.510149] Sense Key : 0xb [current] [descriptor]
    [ 2089.510153] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510171] 1a 07 b2 c7
    [ 2089.510178] sd 0:0:0:0: [sda]
    [ 2089.510181] ASC=0x0 ASCQ=0x0
    [ 2089.510185] sd 0:0:0:0: [sda] CDB:
    [ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
    [ 2089.510200] end_request: I/O error, dev sda, sector 436711103
    [ 2089.510205] Buffer I/O error on device dm-3, logical block 636
    [ 2089.510208] lost page write due to I/O error on dm-3
    [ 2089.510212] Buffer I/O error on device dm-3, logical block 637
    [ 2089.510215] lost page write due to I/O error on dm-3
    [ 2089.510220] Buffer I/O error on device dm-3, logical block 638
    [ 2089.510222] lost page write due to I/O error on dm-3
    [ 2089.510227] Buffer I/O error on device dm-3, logical block 639
    [ 2089.510230] lost page write due to I/O error on dm-3
    [ 2089.510245] sd 0:0:0:0: [sda]
    [ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510252] sd 0:0:0:0: [sda]
    [ 2089.510254] Sense Key : 0xb [current] [descriptor]
    [ 2089.510258] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510276] 1a 07 b2 c7
    [ 2089.510284] sd 0:0:0:0: [sda]
    [ 2089.510286] ASC=0x0 ASCQ=0x0
    [ 2089.510290] sd 0:0:0:0: [sda] CDB:
    [ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
    [ 2089.510305] end_request: I/O error, dev sda, sector 436711135
    [ 2089.510310] Buffer I/O error on device dm-3, logical block 640
    [ 2089.510313] lost page write due to I/O error on dm-3
    [ 2089.510317] Buffer I/O error on device dm-3, logical block 641
    [ 2089.510320] lost page write due to I/O error on dm-3
    [ 2089.510325] Buffer I/O error on device dm-3, logical block 642
    [ 2089.510327] lost page write due to I/O error on dm-3
    [ 2089.510332] Buffer I/O error on device dm-3, logical block 643
    [ 2089.510335] lost page write due to I/O error on dm-3
    [ 2089.510400] sd 0:0:0:0: [sda]
    [ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510407] sd 0:0:0:0: [sda]
    [ 2089.510409] Sense Key : 0xb [current] [descriptor]
    [ 2089.510414] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510432] 1a 07 b2 c7
    [ 2089.510440] sd 0:0:0:0: [sda]
    [ 2089.510442] ASC=0x0 ASCQ=0x0
    [ 2089.510446] sd 0:0:0:0: [sda] CDB:
    [ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
    [ 2089.510461] end_request: I/O error, dev sda, sector 436711335
    [ 2089.510502] sd 0:0:0:0: [sda]
    [ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510509] sd 0:0:0:0: [sda]
    [ 2089.510511] Sense Key : 0xb [current] [descriptor]
    [ 2089.510515] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510533] 1a 07 b2 c7
    [ 2089.510541] sd 0:0:0:0: [sda]
    [ 2089.510543] ASC=0x0 ASCQ=0x0
    [ 2089.510548] sd 0:0:0:0: [sda] CDB:
    [ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
    [ 2089.510563] end_request: I/O error, dev sda, sector 436711479
    [ 2089.510610] sd 0:0:0:0: [sda]
    [ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510617] sd 0:0:0:0: [sda]
    [ 2089.510619] Sense Key : 0xb [current] [descriptor]
    [ 2089.510623] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510641] 1a 07 b2 c7
    [ 2089.510649] sd 0:0:0:0: [sda]
    [ 2089.510651] ASC=0x0 ASCQ=0x0
    [ 2089.510656] sd 0:0:0:0: [sda] CDB:
    [ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
    [ 2089.510670] end_request: I/O error, dev sda, sector 436711663
    [ 2089.510713] sd 0:0:0:0: [sda]
    [ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510720] sd 0:0:0:0: [sda]
    [ 2089.510722] Sense Key : 0xb [current] [descriptor]
    [ 2089.510727] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510744] 1a 07 b2 c7
    [ 2089.510752] sd 0:0:0:0: [sda]
    [ 2089.510754] ASC=0x0 ASCQ=0x0
    [ 2089.510759] sd 0:0:0:0: [sda] CDB:
    [ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
    [ 2089.510774] end_request: I/O error, dev sda, sector 436711831
    [ 2089.510812] sd 0:0:0:0: [sda]
    [ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510819] sd 0:0:0:0: [sda]
    [ 2089.510821] Sense Key : 0xb [current] [descriptor]
    [ 2089.510825] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510843] 1a 07 b2 c7
    [ 2089.510851] sd 0:0:0:0: [sda]
    [ 2089.510854] ASC=0x0 ASCQ=0x0
    [ 2089.510858] sd 0:0:0:0: [sda] CDB:
    [ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
    [ 2089.510873] end_request: I/O error, dev sda, sector 436711959
    [ 2089.510919] sd 0:0:0:0: [sda]
    [ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510926] sd 0:0:0:0: [sda]
    [ 2089.510928] Sense Key : 0xb [current] [descriptor]
    [ 2089.510933] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510951] 1a 07 b2 c7
    [ 2089.510959] sd 0:0:0:0: [sda]
    [ 2089.510961] ASC=0x0 ASCQ=0x0
    [ 2089.510966] sd 0:0:0:0: [sda] CDB:
    [ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
    [ 2089.510980] end_request: I/O error, dev sda, sector 436712135
    [ 2089.511030] sd 0:0:0:0: [sda]
    [ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511037] sd 0:0:0:0: [sda]
    [ 2089.511039] Sense Key : 0xb [current] [descriptor]
    [ 2089.511043] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511061] 1a 07 b2 c7
    [ 2089.511069] sd 0:0:0:0: [sda]
    [ 2089.511071] ASC=0x0 ASCQ=0x0
    [ 2089.511076] sd 0:0:0:0: [sda] CDB:
    [ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
    [ 2089.511090] end_request: I/O error, dev sda, sector 436711055
    [ 2089.511111] sd 0:0:0:0: [sda]
    [ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511118] sd 0:0:0:0: [sda]
    [ 2089.511120] Sense Key : 0xb [current] [descriptor]
    [ 2089.511125] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511144] 1a 07 b2 c7
    [ 2089.511151] sd 0:0:0:0: [sda]
    [ 2089.511154] ASC=0x0 ASCQ=0x0
    [ 2089.511158] sd 0:0:0:0: [sda] CDB:
    [ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
    [ 2089.511173] end_request: I/O error, dev sda, sector 436711071
    [ 2089.511188] sd 0:0:0:0: [sda]
    [ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511195] sd 0:0:0:0: [sda]
    [ 2089.511197] Sense Key : 0xb [current] [descriptor]
    [ 2089.511201] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511219] 1a 07 b2 c7
    [ 2089.511227] sd 0:0:0:0: [sda]
    [ 2089.511230] ASC=0x0 ASCQ=0x0
    [ 2089.511234] sd 0:0:0:0: [sda] CDB:
    [ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
    [ 2089.511249] end_request: I/O error, dev sda, sector 436711079
    [ 2089.511263] sd 0:0:0:0: [sda]
    [ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511270] sd 0:0:0:0: [sda]
    [ 2089.511272] Sense Key : 0xb [current] [descriptor]
    [ 2089.511277] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511295] 1a 07 b2 c7
    [ 2089.511302] sd 0:0:0:0: [sda]
    [ 2089.511305] ASC=0x0 ASCQ=0x0
    [ 2089.511309] sd 0:0:0:0: [sda] CDB:
    [ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
    [ 2089.511324] end_request: I/O error, dev sda, sector 436711087
    [ 2089.511343] ata1: EH complete
    [ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
    error.log (only part related to the current session):
    Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    Sep 28 20:20:21 localh

    uzsolt wrote:
    I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
    I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
    Errors in logs:
    Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
    Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
    Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
    Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
    Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
    Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
    Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
    Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
    Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
    Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
    Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
    Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
    Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
    Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
    Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
    Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
    Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
    Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
    Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
    Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
    Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
    Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
    Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
    Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
    Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
    Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
    The other partition works well on same disk as I wrote above.
    Is /home on /dev/sda3?

  • Windows 8 installation problem using bootcamp!

    Hi guys, I would really appreciate some help with this, I think I might of made a big mistake.
    Ok so I bought windows 8 yesterday to run on my iMac through bootcamp.
    I went through the instllation process and came to downloading the drivers (windows support software) but here is where I think i went wrong, when i was asked to burn the windows support software to a cd or save it on to an external drive I chose the option of saving onto a drive but I actually just ended up saving the software on to the main hard drive for my iMac.
    I continued to install windows 8 but after installation as expected I'm having problems with the keyboard, mouse, Internet etc without any support software. I went to 'my computer' and the local hard drive only shows the part of drive of the that was particitianed for windows and can't seem to find any way of accessing the mac os x side of the hard drive. I cant even transfer to the mac os x from windows to figure out the problem from there.
    Could any one please help with this?
    Thanks

    Welcome to the Apple Support Communities
    After using Boot Camp, your computer will start always in Windows. To start in OS X, just hold the X key while your Mac is starting. If you want to start always in OS X, after starting in OS X, go to System Preferences > Startup Disk, and select the OS X partition.
    By default, Windows can't read the filesystem that OS X uses for the partition, so that's why you can't access to the OS X partition. Also, you should have burnt the drivers onto a DVD or a USB drive.
    As you have already downloaded the drivers, after starting in OS X, copy them to a USB drive or burn them into a DVD. Then, start in Windows and install them. Note that Windows 8 requires Boot Camp 5 drivers, that you can only get from Boot Camp Assistant if you are running OS X 10.8.3. If you want to be sure that you install the correct drivers, I recommend you to download again the Boot Camp 5 drivers from the Apple webpage > http://support.apple.com/kb/DL1638

Maybe you are looking for