Windows on Intel Mini

I'm just setting up my Intel Mini and want to install Windows XP using Boot Camp. The internal HD is 80GB, but I already have ~60GB Mac applications installed on the internal HD. Apparently, Boot Camp won't allow you to set up a Windows partition on an external HD, and I'm afraid a 10GB partition for Windows will be too small. Any suggestions?
Intel Core Duo Mini 1.83MHz   Mac OS X (10.4.8)   80GB HD + 250GB FW drive

Parallels is a good choice but if you want to play games or have somewhat graphics intensive programs or games, BootCamp is better. I'm using Parallels on my notebook but I have BootCamp on my desktop. (And since Parallels can now boot using a BootCamp Windows installation, I have the best of both worlds on the desktop.)
Another solution for you would be to offload your Mac installation to the external drive (Firewire will be better than USB 2 for this purpose) leaving your internal drive for Windows. There's a side benefit of doing this - since an external FW drive is going to be faster than the internal mini drive, you will notice a slight improvement when booting up and when using disk intensive applications.

Similar Messages

  • How can I get a reliable airport connection on my Intel Mini?

    I have an Intel mini and I connect it to the internet through airport. When it is working, it shows all the bars as dark, which I assume means I have a good signal. But some times it does not connect on startup, and can't be persuaded to connect with anything I have tried, using the network control panel or whatever. It just does not work. Some times it will work if I shut it down and start it up again, some times not. I also have a G3 Imac using a Hawking USB adapter on the same network, and it is solidly reliable, so that makes me think the problem is in the mini, not the router. It started doing this a few weeks ago, and the problem may have something to do with one of the many software upgrades, for all I know. This discussion thing is really difficult to use, so I hope I can find this question again, and maybe even a good answer.

    Please post a screenshot that shows what you mean.
    To take a screenshot, follow the instructions linked below. Be careful not to include any private information.
    Shortcuts for taking pictures of the screen
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • Intel Mini: Diabling the onboard bluetooth hardware/using a Dlink USB BT

    I have a Intel Mini Core 2 Duo (1.8x Ghz)
    I broke the bluetooth antennae connector inside the case while upgrading the memory. My BT keyboard and mouse continues to work, but only with the case open, and when they are very close to the computer.
    I have located a replacment bluetooth board, but before I spent any mulah to fix the problem, I am wondering if it would be possible to just use a Dlink BT 120 USB device that I already own.
    From what I can tell this particular device is one of a few that will specifically work with Macs. In reading it sounds like it should work without any needed drivers.
    I am relatively new to Macs, so the process for getting things working is a little fuzzy. I've tried to google this, but haven't found any specific help.
    When I plug in the Dlink, the connection to the onboard BT stops working with the existing keyboard and mouse. There is not any obvious signs that the Dlink is doing anything (no windows pop up to state it is connected etc, and there is not anything new listed in the BT sys pref pane). It seems to me that the two BT devices are fighting with each other, and I don't know how to make them play nice.
    I did download the apple BT firmware updater, which I believe is needed to convert the Dlink over to a mac friendly firmware. I ran the updater with the Dlink plugged in, and it seemed to run fine, but I guess I wouldn't know which BT device it was trying to update...
    Anyway, if there is a guru out there that can help me get the Dlink working... I am all ears.
    Thanks in advance.
    EE

    Hi Grigz95,
    I am exactly at the same point in my investigations as you describe in your question.  I would be most interested if you ended up finding a solution. 
    Regards

  • HD Audio is not working in bootcamp windows in mac mini 2012

    HD Audio is not working in bootcamp windows in mac mini 2012

    Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
    >>Clear CMOS<<
    Afterwards update the Intel Management Engine Driver in Windows.
    Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

  • What's the "optimal" resolution for the Intel Mini's?

    I was wondering how high the resolution can go on the intel mini's before the OS X UI starts to lose it's "responsiveness". When I mean "responsivenss", I mean stuff like expose and Dashboard maintaing a smooth animation etc. Thanks.

    I'm more curious than anything, though I'm interested in an intel iBook when it comes out (likely to use an intel chipset for graphics.).
    I was just wonder how the UI experience felt, even at high resolutions. I know that the general consensus is that the intel base macs have a much more reponsive UI but I know that stuff like expose animations on the PPC Mini's can get a bit juddery on a high resolution.
    I don't run anything heavy like games but I like it when the UI feels like it's not on sandpaper.
    I just tried a new iMac at a local reseller. Everything seemed more responsive in general. Resizing was nearly rock solid even on complicated windows such as iTunes, minimizing was smooth (even with the 'genie' effect) but for some odd reason the expose and dashboard animations seemed a bit choppy to me. Which is a bit confounding since it seemed to do everything else well. Maybe it was because the iMac at the store was using monitor spanning with a cinema display. Intel sure improves the UI experence.
    The improvement is not compelling enough to get a new mini. The UI is decent on my current system. It's nice to see that Apple continues to improve the UI speed on the PPC side of things.
    I know that if I get a Intel iBook, resolution wouldn't matter becuase it would be fixed and relatively low. I was just curious if there was any UI performance degradation when resolutions go up.

  • 3.5 HDD for the Intel minis?

    I heard a rumor somewhere the new Intel minis have a 3.5" HDD. Is this true?
    On a similar note, Apple should produce a premium mini, with the same specs as the iMac, but without the screen and same small case design, even bigger. I would like to bring my own display with a powerful mini.
    Bryan

    Hello,
    Screen burn in, 2 displays in a couple of months, I
    think you are full of it!! I have a Rev A iMac G5 and
    Well, the local dealer was quite surprised to see it as well. But, he came to my house, and hooked-up another monitor to make sure that it wasn't a video circuitry problem. And, concluded that it was definitely etched into the LCD panel.
    Installing a new LCD panel immediately fixed the problem, and the currently etched images disappeared.
    But, a little intensive work and new images are burned-in again.
    have left the screen burning many days without screen
    savers and have had only 2 desktop pictures. The last
    picture is 1 +year old. I have the dock on the left
    side from day one, and moved it and looked nothing!
    even on shut down, Nothing "0" burn in here.
    The problem isn't just from having a stationary image on the screen.
    The iMac G5 seems to have suffered more from the combination of a stationary image and intensive (extremely hard work).
    I found that if the temperature was high, that the screen would burn-in very quickly. Even on a brand-new panel.
    But, that's the nature of how I need to use the machines. They are going to be pushed very hard.
    In my case, I was working with audio (editing, refining, splicing, filtering, etc.), for a few hours.
    The temps on the computer would rise to a nice cooking state (heat radiating at you).
    I believe that it is the close quarters of the iMac that lead to this burn-in problem.
    I think the panels would be fine if they were not subjected to extreme heat while displaying images.
    But, when pushed hard, I believe that the image is actually "cooked" into the LCD panel.
    I've never had any trouble with light usage causing burn-in. For example, iMovie and iDVD don't seem to stress the computer hard enough.
    But, professional level (extremely demanding) audio editing seems to push it hard enough to really cook.
    I would suspect that if you brought me any iMac G5 or CoreDuo that I could burn-in it's display permanently within 2 hours with my level of usage.
    But, if I treated it nicely and babied it, then I'm sure I could keep the panel from burning-in. But, then if you're going to baby it, then there's no point in having all that power available.
    In my case, the burn-in that I have seen looks less like "image-persistence" and more like someone took an exacto-knife and traced the outline of the windows (with buttons) into the LCD panel.
    You can see a very defined (bright white) line that exactly matches the border of the windows and buttons that were present on the screen.
    As another poster here mentioned, Image-Persistence is supposed to be reversible. But, the problems I have observed would not disappear.
    I tried Apple's solutions:
    1) Display a pure white image across the entire screen. I tried this for more than a day. No improvement. It just kept the panel warm, and further cooked-in the image.
    2) Leave it off for as long as the image was on the screen. Well, the image was only on the screen for a couple of hours to burn-in the image. I tried turning the computer off for several days (about a week) and no improvement at all.
    The problem was definitely an image etched into the panel. Connecting an external LCD panel produced no problems. And, installing the new LCD panel cured it until a new image was burned-in.
    I basically came to the conclusion that the iMac G5 system was a great computer if you don't need the power it provides. But, if you push the G5 to it's limits, then you'll likely have problems like I had.
    But, there's no point in buying a computer at any performance level if you don't intend to use it's performance potential.
    If I only intended to use the machine to a level that a 1 GHz machine would be sufficient, then why would I buy a 2 GHz machine. It would be a waste of money.
    But, if I buy a 2 GHz machine, I will definitely expect that I can use the machine to it's potential without damaging it. If it cannot handle the work, then they shouldn't design it to perform the task.
    Anyway, the local dealer was equally as skeptical as yourself. But, when he came out and saw the machine in person, he was equally as shocked as I was. I had my full audio setup right there on the desk still setup for him to see what I was doing.
    Note this was not basic audio work. This was complete pro-level equipment feeding audio into the machine for manipulation. No USB equipment and consumer stuff.
    Real mixers, pre-amps, tape decks, turn-tables, etc. fed into the computer through it's audio input port.

  • IPhone no longer can sync with iTunes on Mac Intel Mini

    I have an original iPhone (not 3G). It was working fine until today. Today when I booted my mac mini, Software update said that there was an iTunes update. I downloaded and installed version 8.2 of iTunes. When I connected my iPhone to my mac mini (Intel running 10.4.11), which is what I use to sync my iPhone, iTunes didn't see it. It was as if the iPhone wasn't connected to the mac.
    I thought maybe it was the cable. So, I switched cables. It still didn't sync (or even see the iPhone).
    I have been charging my iPhone using a wall adapter, so I tried both cables with the wall adapter. The iPhone charged just fine using both cables.
    I used the cables and tried to sync my iPod Classic (120GB) with iTunes. I can sync my iPod Classic with iTunes just fine with either cable.
    I have an 17" Powerbook G4 running 10.5.7 and I thought I'd try to see if it could see the iPhone. The Powerbook is running iTunes 8.1.1, I haven't upgraded it yet. I was able to see the iPhone and I could try to sync, but the iPhone isn't sync'ed with that iTunes library so the sync doesn't do anything, but at least the Powerbook sees the iPhone and connects with it (and iTunes sees the iPhone as well).
    I'm upgrading to iTunes 8.2 to see if the Powerbook can still see the iPhone (just seeing if it was the iTunes upgrade that broke the iPhone sync). Well, the upgrade on the powerbook didn't seem to hurt its ability to see the iPhone.
    I'm back at square one. My mac Intel mini running 10.4.11 can't see my iPhone and nothing I do seems to help it see the iPhone, but I can sync my ipod classic using the same cable.
    I'm now wondering if there is something wrong with the iPhone. Has anyone else seen this problem?

    Sometimes a glitch can happen with an itunes upgrade that can cause itunes to no longer recognize your iphone. If you have already tried to restart your computer and tried different usb ports, I would try this:
    http://support.apple.com/kb/HT1224?viewlocale=en_US
    Hope it helps
    Your only removing the outer software so it shouldn't affect your itunes libraries or files.

  • Non-firewire MacBook via USB to Intel Mini as External Hard Drive

    I'm working with the aluminum MacBook that doesn't have a firewire and a Core 2 Duo Intel Mini. Is it possible to connect the Mini to the MacBook via USB and have the Mini act as an external hard drive for the MacBook?
    If so is it possible as well to do it the other way around; the Mini as the boot drive and the MacBook as the external hard drive?
    Thanks.

    Wesley
    I really think there is no way to connect a computer in target mode to the Unibody Macbook which has no Firewire port.
    I did the stupid thing to plug a USB2toUSB2 cable into a brand new Macbook and it fried the USB port (which are soldered on the motherboard) thereby loosing my computer.
    I still don't know IF I made a mistake or IF the cable was the culprit.
    see this post about my mishap
    http://discussions.apple.com/message.jspa?messageID=9778687#9778687
    So my advice...do your data trasfer via Ethernet or external HD or take out the old disks.
    yours
    Pierre

  • Superdrive from G4 Mini to Intel Mini?

    I have a Superdrive in my current G4 Mini. If I bought the Intel Mini with a Combo drive, can I migrate my Superdrive over to it?
    TIA,
    Dale

    yes you can.
    Thanks!

  • Can someone predict the spec's of the new Intel Mini's to current Mini's?

    How much of a drastic or slight change will there be. If someone could just predict the spec's of the new intell's then I might just wait.. I don't want to get a product now that will be considerably outdated in about 5months now.. Will there be a big graphic power increase, processor power increase or what? Also, do you think that Apple will still have the Intel Mini's be at a great price? Will Intel Mini's be 500-700 USD's like the older PowerPC ones?
    Thanks!

    stlouis --
    It is against the terms of use to speculate here.
    No one knows the answers to the questions you are asking.
    If they did, they could not discuss it here.

  • ISight/new intel mini mic problem

    Hi,
    I've got an iSight camera that I've been using on a just retired eMac. I just purchased a new intel mini and I've been trying to set up ichat. However, the microphone won't work at all on the new computer. The video seems to be ok but no sound.
    So far I've:
    Checked all settings in System Preferences > sound
    Checked all settings in iChat > Preferences > microphone
    Started and quit GarageBand
    Under the sound control panel, the input level meter doesn't respond on my mini when the iSight mic input is selected. However, when plugging the camera back into my emac, the sound seems to be fine and responds accordingly. When I start a video chat, the connection doctor shows great video stats but 0% audio transmission to the person with whom I'm chatting. Likewise, the ichat preview input meter doesn't show that the mic is functioning correctly.
    It seems that this must be related to an audio issue on my mac mini in some way but I'm out of ideas right now. I'm especially bothered that the system preferences line in seems to be buggered.
    What next folks? Maybe the next thing is to call for service?
    Thanks,
    Cory

    Hi,
    I've poured over Ralph's advice and web pages prior to posting my first inquiry but still haven't had any success.
    Is there a way to conclusively isolate the problem to the mini and the sound input? I tested the mic on the emac again and the isight works just as it should. Audio and video, both. I've checked that all of the settings between the emac and mini are the same, including all isight prefs and sound prefs. However, the mini seems to not pick up any input from the isight microphone.
    Thanks,
    Cory

  • Intel Mini - HDTV with DVI or HDMI Problems

    Hello
    With my Samsung LE32 and the Intel Mini I get overscan in HDTV resolutions like 1280x720, so I used DisplayConfigX to go from 1280x720 (overscan) to 1240x680
    128 Front Porch 19
    80 Sync 5
    240 Back Porch 38
    1688 Total 750
    As you can see in the following images:
    http://www.romanargenta.com/personal/imagenes/display1.jpg
    http://www.romanargenta.com/personal/imagenes/display2.jpg
    http://www.romanargenta.com/personal/imagenes/display3.jpg
    the image is pinned to the top left corner.
    Playing with the Front and Back Porches seems to do nothing.
    Any suggestions?
    Thanks

    The website for DisplayConfigX has a wonderful FAQ section that explains very well it's operation. Unfortunately, most of everything in that FAQ applies to displays that are based on CRTs with magnetic deflection systems. For example, the whole section on "How to get rid of overscan."
    For a modern, matrix addressed technology such as LCD, DLP, LCOS, Plasma and whatever, most of the FAQ does not apply. It would be nice if the author updated the FAQ with such a disclaimer to stop giving people false hope that overscan, image centering and such things can be controlled by DisplayConfigX on their modern displays when almost certainly it cannot.
    Can you possibly control overscan from your Samsung? Either directly through any user settings or, if need be, through a secret service mode? I think that will be your only hope.

  • Windows formatted iPod Mini

    Hey everyone,
    Basically, i came on here looking for info on how to change my windows formatted iPod Mini to Mac... and found how to do it! But I have one main concern, will a Mac formatted Mini still show up on a Windows machine? I know that my mini shows up on my mac at the moment formatted as windows, but still, will it work the other way round i wonder :S.
    Cheers, Ben
    iBook G4 - 12inch - 1.33GHz - 1GB DDR   Mac OS X (10.4.7)   6GB iPod Mini in Green

    An iPod formatted for Mac won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. However here are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance: XPlay 2

  • Use PC5300 RAM from Intel Mini in 1.42G PPC Mini?

    I upgraded my Intel Mini and have 2 spare sticks of 512M (PC2-5300S-555-12-A0).. my sister has a 1.42GHz Mini (PPC) with only 256M of mem and wants to upgrade... I know the PC5300 would not run any faster than the "correct" memory (2700 or 3200 I think) for her Mini, but the price is definitely right (ie. free).. would it work in her machine?
    Thanks,
    Mike

    The PC5300 memory from your Intel mini won't fit in a PPC unit. Aside from the difference in speed and type, the Intel mini uses two sticks of laptop RAM while the PPC mini has just one memory slot which takes the larger desktop memory.
    In reality, given the price these days of memory for these systems, it's probably better to keep your RAM just in case you need it for diagnostic purposes, and get a single module, either 512Mb or 1Gb (which is the maximum for PPC minis) for your sister's unit. It's only $42 for 1Gb at Crucial for example (http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=BEB4B190A5CA7304)

  • New Intel Mini makes a slight whirring noise

    Hi
    I have just replaced my old G4 Mac Mini with a entry level Intel Mini.
    I noticed the new one maked a slight whirring noise constantly.
    Its only minor but noticable in the background
    The old Mini just used to have a slight fan noise which was more tolerable.
    Do all new Mini's make this noise?
    Tc

    Is the fan suppost to run at all times when the
    machine is on?
    The fan on all minis runs constantly - in normal operating conditions it turns at relatively low speed and thus creates little noise. Initially because the mini ran so quietly, many owners concluded that the fan wasn't running until the system required it, but that isn't and wasn't the case. It was only after a MacOS update had altered the fan behaviour and made it spin up earlier as temperature rose or CPU increased that many users became aware that there even was a fan inside!
    Since the fan is controlled by the system in response to temperature and load, it's apparent behaviour isn't always consistent between systems since it'll depend a lot on which version of MacOS, what ambient air temperatures and what services are running. Thus a mini that appears to run louder than usual may actually be nothing more than the user's perception, or higher ambient air temperature, or heavier load caused by additional services run at startup, or a version of MacOS that was more prone to ramp the fan up earlier in the temperature cycle - or of course a fault!
    But indeed, where they are audible at all, the fans in the PPC models make a sound of different character completely from those in Intel models.

Maybe you are looking for