Windows Operating System Health Status Not Monitoring

Hi, I have installed SCOM agent to all my servers (Picture attached) and found some windows server not report health status and also i have already Installed Windows server Monitoring pack
I have run below list troubleshooting step but no luck on this
1. Flush agent cash and try refresh the agent
2. remove agent and wait for 3 days and install agent again
3. remove agent clear registry, re installed
but the result is same, even scom server itself windows health services show as not monitored,
Could anyone help on this
<< picture attached >>

Hi,
Did you import the below management pack for Winddows Server Operating System?
https://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

Windows Operating System not being monitored

I have installed some of the management packs (advanced workflow module events, event log provider events, performance monitor porvider events, registry provider events, script and powershell provider events, service monitoring events, vmi provider events) and
there are no overrides. I still cannot get the windows operating system to get monitored. I have restarted the server and still none of the windows operating systems are being monitored. Is there a certian management pack that i need to install
for the monitoring Windows Operating Systems.

dktoa is correct, just because you have the Agents installed does not mean that anything is actually being monitored. In fact, all that will be monitored is the Agent itself being able to communicate with the Management Server.
However, I would suggest to ensure that all of your Agents are reporting back as Healthy (aka green), before you import any Management Packs. That way any issues that may occur can be directly linked (and thus troubleshooted) to the MP.
Additionally, you have not mentioned what Windows OS you are trying to monitor. More than likely it is a Server OS; in which DKTOA has provided the link for the Windows Server Operating System Management Pack.
However, if in case it is a client-based Windows OS (i.e. XP, Vista, 7) than that Management Pack can be found here: http://www.microsoft.com/en-us/download/details.aspx?id=15700.
You should note, that there currently is no Management Pack for Windows 8; though it is due out soon.

Windows Operating System "Not Monitored"

Hi, I have seen multiple posts regarding this, and I have tried many things without luck. I thought I'd contribute what helped me. Funnily, I actually fixed the problem while posting my question. But I thought this may be useful to anyone else with the same
issue.
We have SCOM 2012 7.0.8560.0
We have the Windows Server Operating System MP installed, 6.0.7061.0
3 servers are reporting that the Windows Operating System is "Not Monitored".
The 3 servers which are not being monitored all appear to be Windows Server 2012 R2 operating system.
What we've tried
Uninstall SCOM agent from the SCOM console. Remove SCOM agent folder. Reboot. Reinstall SCOM Agent from SCOM Console (push install). install completes successfully.
Enable Proxy Discovery
Reboot SCOM Servers
Ensured the SCOM service account has Admin rights on the server
Disabled Windows Firewall
Set User Account Control to minimum
Verified DNS (DNS functions 100% in our environment, with scavenging every 7 days)
SCOM Database Grooming runs every 7 days
The problem has existed for weeks\months, so this is not a DNS or Database grooming issue (unless there is something lingering in the database?)
Re-Ran the "download SCOM Management Packs" from the console - all MP's are up to date
After reading through the release notes of the Windows Server Management Pack, I searched my discovery rules to perhaps see if we had disabled the Server 2012 discoveries, or something careless like that. To my amazement,
there we NO Windows Server 2012 R2 Discoveries present in our environment! This confused me greatly, since we are running the latest version of the Windows Server management pack.
For some reason, it appears that updating your MP's from the console wizard does not pull this down.
After manually downloading
the Windows Server Operating System management pack, and installing it manually, everything started to work.
I'm not sure why the SCOM wizard doesn't do this, but this has kept me busy for days, for something so easily missed.
I suggest MS enhances the SCOM "update MP" downloads to pull down an entire management pack if it says it was "imported successfully". I now wonder what else I think it "up to date", which may have rules missing without
my knowledge.
Cheers

Hi,
It is really nice of you to share this, this will help others who encounter the same issue.
And as far as I know, we need to manually download the Windows opearting system management pack to management group, then we can monitor windows operating system:
http://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 - Windows operating system is not monitored in a SCOM agent

Hi All,
I have an agent with windows 2012 operating system that i am trying to monitor.
At the "Windows computers" view the "Windows operating system" column is empty ("Agent" column is Healthy).
Why SCOM doesn't recognized that the agent have operating system?
Please help.
Thanks.
TechNet

Hi,
On workgroup servers, you have to make sure you've used the momcertimport tool to import the certificate into the SCOM service.
In addition, I would like to suggest you go through the below article to monitor non-domain servers with SCOM:
Monitoring non-domain members with OM 2012
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Cannot monitor Windows Operating Systems

In the process of attempting a SCOM 2012 R2 deployment, I cannot get SCOM to monitor the Windows systems on which the management agent has been deployed. I have installed the "Microsoft Windows Server" MP, as well as a bunch of other "server"
related MPs (i.e., DNS, AD, etc.)
Selecting the "Microsoft Windows Server" entry in the monitoring view shows all the entries I would expect to see, but none of the selections show any data being collected. All of the Windows Updates have been applied and the systems rebooted.
I have searched this forum as well as the web, and haven't found anything that works. I'm wondering what I've missed.
BTW, the SCOM server is clearly having issues (see my other "Log on locally" thread) but I don't know if there is any connection. In other words, my SCOM deployment may need to be done over. (Although it is unclear to me just what tables
and other information would need to be removed from the SQL database.)
- Mark

Hi,
For the issue that Windows operating system not monitored, the cause may be not importing the Windows Server based OS management pack:
System Center Management Pack for Windows Server Operating System
http://www.microsoft.com/en-us/download/details.aspx?id=9296
Windows Server base OS monitoring is not a part of the default management packs shipped with SCOM, we have to download and import it.
In addition that, this issue can occur because the new agent has the same NetBIOS name as a previously installed agent. When the agent is deleted from Operations Manager, the grooming of the deleted agent is hard coded to occur after two days. Therefore,
the agent is not immediately groomed out of the database completely.
To work around this issue after the old agent is deleted from the console, wait three days, and then add the new agent to Operations Manager. Alternatively, make sure that two full days have passed and then add the new agent to Operations Manager.
Quote from:
http://support.microsoft.com/kb/979387/en-us
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

This installer does not support installation on a 64-Bit Windows operating system

This installer does not support installation on a 64-Bit Windows operating system

I am having the same issue. I am trying to install Premiere Elements 13. I purchased a software license from my local Office Depot, I can't return it for any reason and now I don't know what to do. HELP!!!!!
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Premiere Elements.
ERROR: System check returned with error : 6

Windows 7 Client Operating Systems (Aggregate) reports not working

Hello All,
We are using Windows 7 Management pack in SCOM 2012.
We tried running reports in Widnows 7 Client OS (Aggregate) MP.
There is no data in the report. Do we need to enable any rules to collect data for these reports?
We need Memory related reports in this MP.
We have windows 7 agents and we can performance data in OPS console for those agents.
Thanks!!

Verify that you install windows 7 management pack from below link
http://www.microsoft.com/en-us/download/details.aspx?id=15700
You can also check below link to resolve your issue
http://social.technet.microsoft.com/Forums/en-US/54efc509-cbb0-407c-b826-17694cd5f0bc/windows-7-client-operating-systems-aggregate-reports-not-showing-any-data?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

MuVo V100 - Windows Operating System Not Suppor

Just bought a MuVo V00 - After inserting the program disc, the following message appeared: "The Windows Operating System running on this computer is not supported by this product". The package shows that W98SE is supported and this is what my Dell computer has loaded (W98 SE Build 4.0.2222). What's confusing however, is that in the instructions, it says that to check the operating system version, go to START/RUN and type WINVER. After doing this, it responds with W98.

tomtofriend wrote:
You can update OS to Windows ME it support good more than Windows 98 SE . Go to OS Windows ME .Message Edited by tomtofriend on -29-2006:03 AM
ME must rate as M$'s worst OS ever - very flaky! If you're going to recommend an OS upgrade for this problem why not go straight to XP - the OP's player will work as soon as it is plugged in then. PB

Installer does not support installation on a 64-bit windows operating system?

I purchased adobe photoshop elements and premiere elements, photoshop has installed fine but when the installation of premiere should complete I get a pop up saying that the installer doesn't support the installation on a 64-bit windows operating system. I don't have a disc, just a software download card.

Hi ,
Premiere Elements 12 have different installers for 32 and 64 bit machines.
Please download 64 bit installer from the link:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=en_gb
Also,your serial number will work for both the installers.
-Shikha

HT1678 How do I synch/download photos from my iPod classic to my computer, which has a Windows operating system? Thanks.

I am trying to download photos from my iPod to either an external hard drive or my computer, which has a Windows operating system. The iPod should function like an external hard drive, right? My photo files/computer/hard drive were damaged. Can I put my photos on the iCloud, and then save on external drive? Not sure how to o this either. I lost a few years of baby photos. Thanks for any help!

iTunes syncing to iPods (that are not iPod touch) mostly goes one way, from computer to iPod. For photos, at the time you synced the photos to the iPod, there is a setting that you needed to have enabled in iTunes if you later want to recover them from the iPod. This setting is on the iPod's Photos tab in iTunes (where you set up photo syncing). There is a checkbox for Include full-resolution photos.
IF that checkbox was checked, you can Enable disk use on the iPod's Summary tab, and find the full-res photo files in the Photos folder on the iPod. Otherwise (if setting not checked), when iTunes syncs the photos to the iPod, iTunes converts the images to a very low-resolution version that is optimized to fit the small iPod screen and stores the image data in a single database file (to save storage space). There may be third-party software that can extract separate photos from that database file, but the resulting photos will look bad blown up to computer screen size.

Windows Operating System Health Status Not Monitoring

Similar Messages

Maybe you are looking for