Windows option not showing in startup disk

I have recently installed windows 8 on my MacBook Pro 10.8.3 but I am unable to see windows section in the startup disk... I want windows when I start my laptop. Pls help.

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/17849073#17849073

Similar Messages

Drive Not Showing In Startup Disk

I have re setup my MacBook Pro, all seems well apart from this little problem. My Mac OS X Partition or Windows Partition shows in startup Disk.
Both Operating Systems do startup fine though.
I have my disk partitioned like this
Free Space
Windows 7
Mac OS X
Its setup in this way so i can use TrueCypt for the Windows side.
Does anyone know how to correct this please?
You can use this link to view a screenshot
http://www.edugeek.net/attachments/forums/mac/9912d1302462528-drive-not-showing- startup-disk-screen-shot-2011-04-10-20.07.19.png
Thanks

if you try to verify the disk, dose it report any errors? (open disk utility, click on the Macintosh HD, click on the repair tab, click verify disk.)
If you option boot, dose the computer list both Boot Volumes?
Have you tried blessing the mac hard drive?
ie: "sudo bless -folder /Volumes/Macintosh\ HD/System/Library/CoreServices -bootinfo"
(note the above bless command blesses the Hard Drive with the name "Macintosh HD", if you mac volume has a different name, change to match your hard drive's name.)

Hard drive partitions are not showing in Startup DIsk

My hard drive is partitioned into two volumes. HD1 & HD2 (Both 500 MB)
I had Snow Leopard installed on one (HD2) and Mavericks istalled on the other.(HD1)
Both volumes were visible in the Startup Disk option in System Preferences and I could restart from either.
I upgraded the Mavericks istallation to Yosemite - worked OK.
System Disk option showed both HD1 & HD2
Restarted the Mac from HD2 in Snow Leopard mode - no probs.
Then the problem started. I wanted to restart from HD1 in Yosemite mode.
Went in System Preferences to Startup Disk option - HD1 did not show in the window - only HD2 (Snow Leopard) & Network Startup.
Any ideas anyone? (Could be a bug?)

When I restarted using Com+Opt+P+R it went into Yosemite mode with both volumes showing in Startup disk.
Restarting with HD2 (Snow Leopard) gave me the same problem again.

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

System Compression option not showing up in Disk Cleanup tool

I am trying to give the new "System Compression" option in cleanmgr a spin but for some reason it is not showing up on my system. I have installed Windows 10 TP into a small partition on an eSATA hard disk, leaving my internal HDD for Windows 7,
if that makes a difference. I'm using a clean install of build 9926. Any ideas?

Hi andrum99,
Could you please explain a bit for the system compression in cleanmgr?
I only seeing the option under the drive properties for Compress this drive to save disk space, and I never heard of the new '' system compression".
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 not detected by Startup Disk Selector anymore

Good Morning,
I've updated my early 2011 15" MacBook Pro's EFI Firmware to the one that came out last week & in that process it seemed to have reset my startup disk selection for my machine. I have 10.7.3 installed aswell as Windows 7 via Bootcamp & I can still boot into Windows just fine when manually selecting it during bootup/when pressing alt etc, but within Lion's Startup Disk Selector it strangely does not appear (see image below), but e.g. 'QuickBoot' (a tool that runs in the menubar to quickly reboot into other os'es) does also detect the Windows7 installation just fine.
Similiarly, under Windows 7 and the Bootcamp installation & tool there, it now (after the FW update) says, I do not have permissions to run the tool (I am running as Administrator).
Does anyone know what's going on and how I can change the Startup Disk now? Manually would be just fine, too.
Best regards and thanks,
-Jörg

Is 'QuickBoot' native to Lion? ie, it isn't 3rd party tool.
Do both show up in Windows control panel (Boot Camp) to change the default startup system?
And do you have an NTFS driver for OS X? that can also change behavior.
You would use 3rd party NTFS to be able to write to Windows partition.
I almost never had Windows show in OS X's Startup Disk c.p. but always worked from in Windows.

Windows HD not showing in starup disk in system preference!!

Hi,
I install 2 new WD caviar 640 k in my system, one for OSX which i installs with
SuperDuper. And one for my vista 64 ultimate, which i install with Casper cloning
my volume.. Everything seems to be working, except that i don't see the windows HD in Starup Disk in system preferences!! only the OSX. The disk appears in disk utility and i can boot using the option key...
Any idea?
Daniel

Hi!
I finally solved my problem, what i did was erase and create a partition with BootCamp on the new HD, Format and reinstall windows, than i copy my old vista
volume to the new HD.. and every thing is showing where it's suppose to be..
The problem was with the format procedure, in Disk utility when i selected
the windows HD it showed in Partition Map Scheme: MBR and now it shows
GUID PARTITION Table and the volume format is (NTFS) of course.
Daniel

Partition does not show as startup disk

I have partitioned my iMac drive and have snow leopard on HD and Yosemite on HD2. When I go to change to the Yosemite partition (HD2) it does not show in systems available to startup from, even though it used to be there.

Mine doesn't either, or rarely (did in the past) so I just use Windows Boot Camp control panel where both do show up.
If you alter or resize or create a 3rd partition, that also can happen.
Some people use rEFIt boot manager, I never have and so can't comment on its utility, but might want to check it out.

Bootcamp not showing as startup disk?!

I am trying to install windows on my Macbook pro (Mid 2011) and I have partitioned the disk, made an install disk (USB Stick) and restarted my computer after choosing the option to install Windows in bootcamp. I get a black screen with "No bootable device found -- insert boot disk and press any key. Well, that is also an issue. If I hold down alt while starting up, I only get the 2 options of Mac OSX and Recovery. No Windows like all the videos I've watched have showed it. Aparently there should be a yellow symbol as a third option. I really need some help with this.

If you have/had a built in DVD drive you have to use that or Google USB boot camp hack, no other way will work

HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
Please help, if any one knows any solution.

Hi @Firoskhan,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Windows based WD external hard drive not showing up in Disk Utility to reformat to Mac... how can I erase the drive

We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format. Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X? Or how can I get this drive to show up in Disk Utility? Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive. And we are ok with losing all the current data on the drive.

Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk?

Installed latest mavericks, now windows does not show up on startup. How do i fix this?

I installed the latest version of mavericks and now windows does not show up on startup, but the partition is still there with no name. Can anyone tell me how to fix this?

Hello, when I try to expand the OSX hard drive to the potential it will not let me so im assuming that the windows part is still there but hidden?

Windows does not show ipod as a removable drive

my itunes recognises my ipod and works properly, but windows does not show ipod on "my computer". can i use it also as a hard drive? and how do i make windows see it as such?

Hello Rea Meir,
And welcome to Apple Discussions!
Make sure the *Enable Disk Use* option is enabled for your iPod under it's Summary tab in iTunes. For more help and information, see this Apple support document.
[Using your iPod as a storage drive|http://support.apple.com/kb/ht1478]
B-rock

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

Join CD tracks option NOT showing up in iTunes 11.4

Once again, Join CD tracks option refuses to show up when I am trying to import an audiobook CD. The tracks are sorted consecutively by track Name, I am selecting all the tracks, and the options menu upper right of the window does NOT show Join CD Tracks.
I have separately and together varied the following: toggled the compilation CD box off and on;
restarted iTunes;
switched from one CD to another in the same set;
change the 'type' from 'spoken & audio' to audiobooks to music to unclassifiable
and still no joy.
I have used Join Together to join tracks from Audiobooks but if starting from individual tracks, CD by CD, there are always a few chapters out of place. I need this first step to work.
Is there anywhere else to look for a variation to make the lost option reappear?

"The tracks are sorted consecutively by track Name"
You need to sort consecutively by track number for the Join Tracks option to be available.

Windows option not showing in startup disk

Similar Messages

Maybe you are looking for