Windows OS requirements for MAXBD

HI all
We are doing an ERP installation on MAXdb / windows 2008. According to note 919224, only Windows Enterprise versions are supported / required. Can someone confirm that we cannot install on Windows 2008 standard??

This is not a question of whether or not you can install the software.
In fact, you can even get the ECC 6.0 with MaxDB running on WinXP.
The point is: you won't get any support for this - or at least we (support) will tell you to install a supported operating system and reproduce the error.
But the Windows Enterprise license really should be the smaller part of the project budget...
regards,
Lars

Similar Messages

  • Windows update requirements for Xerox print drivers on Windows 2003 server

    Hello, We are currently deploying a fleet of Xerox MFD's across ~100 locations, and we are running into an issue installing the print drivers on some Windows Server 2003 (32bit) boxes. (both the machine specific driver, as well as the Xerox Global print driver) The print driver installs fine, but no jobs will actually print, and if you try and print a test page, an error "Test page failed to print. Would you like to view the print troubleshooter for assistance?" comes up instantly. We have seem to have narrowed the problem down to a missing Windows update, as if we do all available High Priority and Optional updates, it starts to work fine. Does anybody know specifically which Windows updates are a requirement for the driver?  Our 2003 servers were last fully updated about a year ago, and due to time constraints, if we could just install the Windows updates that are needed it would be a big help. Thank you in advance

    When Xerox dropped support for XP, they stopped adding particular files from the driver packs (probably for size reduction) because they were all included by default in every newer OS. If you install this here on any XP/2003 base machines it will work as normal. It is best to install that before the driver install, but I have been mostly lucky to have it work fine days later. YMMV

  • Windows 2000 requirements for LabVIEW 8.5.1 & DAQmx 8.7.1

    Greetings,
    I've been looking around for a detailed set of requirements for LabVIEW 8.5.1 and DAQmx 8.7.1 for the Windows 2000 platform. 
    So far I know I'll need Service Pack 4 and probably Explorer 6 and .Net 2   But I can't find confirmation on the last two things, and I'm not sure if there are any more. 
    Does anyone have a link to this information on  ni.com? 
    Thanks. 
    Patrick Allen

    Thanks for the reply Denis,
    I'd found both of those previously actually.  But I wasn't sure they were "complete". 
    I can't say 100%,  But I'm pretty sure I had to install .Net 2 on a system once before for DAQmx.  (Or maybe there was a warning...or something) 
    Just thought I'd try and find out as much as I could before I go and do a remote upgrade where I won't have any Internet access. 
    Patrick Allen

  • Which version of Windows is required for Firefox 5

    Which version of Windows in a requirement for''' Firefox 5''' ?

    [http://www.mozilla.com/en-US/firefox/5.0beta/system-requirements/ Firefox 5 System Requirements]
    '''Windows Operating Systems'''
    *Windows 2000
    *Windows XP
    *Windows Server 2003
    *Windows Vista
    *Windows 7

  • Which Edition of Windows is required for using SQL 2012 Always On Availability Groups

    I want to use the new feature of having 2 secondary mirror replicas. the first secondary replica will be sync the second one will be async.
    Currently I have SQL Enterprise license and Windows 2008 R2 Standard license.
    Will I be required to upgrade to Windows Enterprise license to use Always On? (since this feature depends on Windows clustering?)
    Can you please confirm if SQL Always On feature can be used on Windows 2008 R2 standard or not?
    MSDNStudent Knows not much!

    Always On is available with Standard Edition but it supports only 2 nodes. 
    AlwaysOn is a bigger umbrella which covers two features. AlwaysOn Availability Groups (AG) and AlwaysOn Failover Cluster Instance (FCI).
    FCI for 2 node is supported. You can't use AG feature in SQL Server Standard Edition
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Windows OS required for hp proliant ml10 server machine

    Dear / Sir
    I planned to buy a new server machine which is a hp proliant ml10
    so my query is  whch operating systems i can legally install on it.
    any legel windows operating systems or only windows server edidtion.
    Thanking you
    nitin

    Hi,
    You can found your server model is certificated with Windows Server or not in Windows Server Catalog website:
    ProLiant ML10
    by Hewlett-Packard Company
    Compatible with   the following versions of Microsoft Windows
    Windows Server 2012 R2 x64
    Certified for Windows
    Windows Server 2012 x64
    Certified for Windows
    Windows Server 2008 R2 x64
    Certified for Windows
    Windows Server 2008 x64
    Certified for Windows
    But the ProlLiant
    ML10 have many extension model, personal advice is you can ask your hardware vendor for the further help.
    The related third party information:
    HP ProLiant ML10 Server
    http://www8.hp.com/us/en/products/proliant-servers/product-detail.html?oid=5390723#!tab%3Dmodels
    More information:
    Windows Server Catalog
    http://www.windowsservercatalog.com/item.aspx?idItem=3d94ac2f-058b-25af-7225-f6119e3c25f9&bCatID=1282
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 10 Requirement for Microsoft Account

    I am trying Windows 10 Technical Preview... I tried to use skype and it requires a Microsoft account.  My options appear to be remove windows 10 or change skype.

    You can install Skype desktop version and login with any account.
    https://support.skype.com/en/faq/FA12162/how-do-i-get-the-desktop-version-of-skype-windows-8-or-abov...

  • HT5634 What type of windows is required for bootcamp?

    i do not no if i use the system builder or upgrade or oem

    Welcome to Apple Support Communities
    If you haven't got Windows, you have to purchase a System Builder or full version. You can get them at Amazon or NewEgg. System Builder is cheaper but you can only use it in your Mac. However, with a full version, you can use it in one computer, but then you can use it in another computer if you remove Windows from the Mac.
    The upgrade version is only for users that already have Windows installed

  • Sytem Requirements for Windows .exe published as aggregator project in CV6 (Windows 7, 64 bit)

    Dear all,
    I am using CV6 for Windows (7, 64 bit, German version) and just published an aggregator .exe consisiting of 13 .swf files. It seems as if it the .exe runs fine in most of the times.
    However, some (international) customers have problems starting the .exe though the FlashPlayer has been installed, and (German!) CV Aggregator info boxes of error messages will come up.
    The box below says that the FlashPlayer version installed is not the latest one. The latest FlashPlayer version has been installed successfully, but without affecting the existing FlashPlayer installation (????). Doubleclick the .exe file again.
    In other words, the .exe cannot be started not even with the latest FlashPlayer installed.
    Could you please list all Windows system requirements for running this .exe.
    Thank you very much!

    The support article on Firefox "hanging" has a few pointer on Firefox failing to fully shut down and clean up after itself. Does anything here help:
    https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

  • Java SE minimum CPU requirement for x86

    According to Windows System Requirements for JDK and JRE the min. CPU requirements for JDK 7 is a Pentium II 266 MHz.
    A Pentium II is a i686 CPU.
    However, the installation packages for Oracle JDK 7 available at Java SE Development Kit 7 - Downloads | Oracle Technology Network | Oracle show i585 package names. Should they not be called i686 to be correct?
    Thanks.

    However, the installation packages for Oracle JDK 7 available at Java SE Development Kit 7 - Downloads | Oracle Technology Network | Oracle show i585 package names.
    Actually they show 'i586' in some names.
    Should they not be called i686 to be correct?
    Probably - it if concerns you that much just use one of the 'contact us' links on that page and report it to Oracle.

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

  • I am trying to upload itunes 10.5, but get a message "There is a problem with this Window Installer Pkg. A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  What is it I need to do?

    I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package.  A program required for this install to complete could not be run.  Contact your support personanal or package vendor."  If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now?  What is my "package vendor"? And what is it I need to do to fix this?  The message is unclear.  Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load.  Now I have no itunes on my computer and unable to sync my iphone.  Help!
    Thanks - Rick

    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

  • I'm not able to download Itunes.  I keep getting this Apple Software Update message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your package vendor"

    Not able to access Itunes store anymore.  Just quit working for no reason.  I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  Not sure what this message means.  Am I suppose to contact Apple ?  What is meant by package vendor ?

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

Maybe you are looking for