Windows partition inexplicably full - please help!
I just created a 16GB partition on a MacBookPro for Boot Camp to play Star Trek Online. The system requirements for the game was 10GB, but after the install of Windows XP (plus all the updates to date) and then the game, I am getting a low HD space error! No way XP takes up 6GB...? I was under the impression XP only took up about 2GB. I have installed nothing other than XP and the game (and the latest Boot Camp 3.1 drivers).
There is currently 102MB free on the drive.
I would have created a larger partition, but I was unable to do so because I kept getting an "unable to move files" error. I read somewhere that it could be because of disk fragmentation (there is actually 47GB free on the entire MacBookHD), so I ran a defrag app. But I still got the error until I dropped the partition to down to 16GB. Maybe this has something to do with the unaccounted for space on the Boot Camp partition? Just a guess.
Anyway, what do I do at this point? The process of installing XP and the game took several hours and Im not looking forward to doing it again! Is there any way I can salvage the situation?
It's my brother's MacBook Pro and its the only computer he has.
I thought XP took 2GB (I actually read this online somewhere--I didnt pull the # out of a hat) so I did double what I thought and allowed for 4GB, leaving me 2GB for temp files and STOL patches. Unfortunately the info I found was incorrect.
Well anyway, what you say is not necessarily true because I have XP Home with all the updates (including SP3) and it only took up just about 6GB. Add the 10GB of STOL and the remaining for XP maxes out my 16GB partition.
Hopefully it takes up less and I can clean up around 1GB worth of temp files from all the XP upgrades and STOL installation. I just dont know where or how to clean those out--if there even are any.
Similar Messages
-
Windows - No Disk Error - Please help!
Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input. -
Windows 8.1 BSOD please help Minidump file attached
Windows 8.1 BSOD please help Minidump file and dxdiag info file link is below,
This BSOD frequency is about once every 1 hour to 4 hours,
Memtest passed with one pass on the one chip of 4GB
Brand new 8.1 install
https://drive.google.com/file/d/0B39S6eNyRvOHRnZHRG1Jd1lwT2M/view?usp=sharing
https://docs.google.com/document/d/1XueM-ov7wjfePJh45Pp3fg1QSSzFBqMuO1tfr9GZm8k/edit?usp=sharingThis is a crash related to some type of hardware failure. Please refer to the Wiki link below, for some troubleshooting tips.
BugCheck Code 124 Co-Authored by ZigZag3143& JMH3143
http://answers.microsoft.com/en-us/windows/wiki/windows_other-system/bugcheck-code-124/98c998d2-447a-40ce-ae1f-8211e355f14d
WARNING: Whitespace at end of path element
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
Machine Name:
Kernel base = 0xfffff800`c0e7b000 PsLoadedModuleList = 0xfffff800`c113f990
Debug session time: Tue Mar 3 23:19:34.178 2015 (UTC - 5:00)
System Uptime: 0 days 0:00:04.947
Loading Kernel Symbols
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, ffffe000016f88f8, 0, 0}
Probably caused by : hardware
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe000016f88f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
BUGCHECK_STR: 0x124_AuthenticAMD
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
STACK_TEXT:
ffffd000`2087f6c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x81
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: hardware
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV
BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV
Followup: MachineOwner
1: kd> !errrec ffffe000016f88f8
===============================================================================
Common Platform Error Record @ ffffe000016f88f8
Record Id : 01d0563268a81312
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 3/4/2015 4:19:34
Flags : 0x00000002 PreviousError
===============================================================================
Section 0 : Processor Generic
Descriptor @ ffffe000016f8978
Section @ ffffe000016f8a50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000100f42
Processor ID : 0x0000000000000000
===============================================================================
Section 1 : x86/x64 Processor Specific
Descriptor @ ffffe000016f89c0
Section @ ffffe000016f8b10
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal
Local APIC Id : 0x0000000000000000
CPU Id : 42 0f 10 00 00 08 02 00 - 09 20 80 00 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
Proc. Info 0 @ ffffe000016f8b10
===============================================================================
Section 2 : x86/x64 MCA
Descriptor @ ffffe000016f8a08
Section @ ffffe000016f8b90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_OBS_ERR_*_NOTIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xba00001000020c0f -
Itunes opens in new window??? please help...
itunes opens in new window??? please help...
In article <[email protected]>,
[email protected] wrote:
> Huge thanks Martin. That was sure easy. By the way, do you know how to get a
> link to open a PDF?
Collect the PDFs you want to link to in your site. Then link to them in
the Inspector palette just like you'd link to other pages. If you want
the PDF to open in a new window use target _blank as before.
What actually happens on a visitors computer however depends on whether
they have the PDF viewer plugin installed. In that case the PDF will
display in the browser window. If they don't have it installed, the PDF
will download to their computer and they'll need to open it manually.
Cheers Martin -
My computer keeps saying "The iTunes Library.itl file is locked, or you do not have write permission for thsi file." I am running iTunes 10.5 on a windows 7 computer. PLEASE HELP!!!
sorry, i don't have the answer, but i think i have the same problem if i may expound:
I did a windows 7 update.... and today i tried to modify some song info in iTuens... I selectd an album with 12 songs in it, right clicked for "Get Info" tied to update album info including year, album artist, etc... but it would not take. I checked the security setting in the windows folder and confirmed i had admin rights etc...still no go... -
MY MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks
To prevent this being accidentally activated in the future go to SystemPreferences>Keyboard>Keyboard Shortcuts>Universal Access and uncheck all the boxes.
-
How do i sync my iphone 4s to the latest windows 8.1? please help !
how do i sync my iphone 4s to the latest windows 8.1? please help !
Copy over the library from your previous computer or see Recover your iTunes library from your iPod or iOS device to avoid losing data.
tt2 -
I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Windows 7 needs repair, please help !
Hello. I'm a desktop PC user of Windows 7 Professional with service pack 1 on 32 bits. I've tried to resize my partitions using Aomei and Paragon partition managers. I would take away some space (10Gb) from non-system drives, and then try to extend my C
drive, since it's gotten nearly full. Yet Disk Management in Windows never let me to extend C with an unallocated space I took from D. So I used these programs. Now, I had done it once before, successfully. Such programs require restart, to perform a PreOS
actions. Okay, I let it, and when it finished, it came up on the boot with a message:
'Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your Windows installation disc and restart your computer,
2) Choose your language settings, and then click ''Next'',
3) Click ''Repair your computer''.
Now, since I did not possess such CD/DVD, and since I'm a student of Electronics in Belgrade, I have a privilege to download Microsoft products for free, for studying purposes. I used my mom's laptop and burned a downloaded Windows 7 Professional with SP1
32bit (.iso) successfully. The DVD is correct. Then I insert the DVD into my desktop computer and nothing happens, not even when I restart my computer. And I've restarted it quite a few times. What am I supposed to do now ? Please help me. (:Hi,
How's everything going? Have you taken Rick's questions into consideration?
Have you tried to use Last Known Good Configuration as mentioned in the this link, it will bring your system to a state when most recent system settings worked correctly.
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-7
Regarding to the iso (burned to DVD), make sure to boot your PC from DVD (by press a button like F8, it depends on your PC model, you can refer to the PC user manual).
Yolanda Zhu
TechNet Community Support -
Cookies problems on T61 Window's XP Pro,please help....liamo
Hello Forum.....I have deleeted some cookies (only 1kb trpes) individualy.... but cant delete them all, and the one's with 2,3,& 5kb's no chance.......Ive tried many ways & times but cant get there...please help....thanking you, yours sincerely, Liamo
Hi,
allright , lets talking about small workspace... instead of small cookies
even when your Windows XP works fine ,but should have enough room to breath...i.e. my install of XP with all needed programs
is 8 GB ..
double the workspace is the best . for temporary data... so the minimum of partition should be around 16GB
enought to hibernate (size depends on your installed memory) that could be 1-4GB Harddrive room.
Windows itself swap (if you dont set this of) every time from memory to harddrive...
Windows save from time to time (also if didnt set this off) the actual condition .needs room to save...
and many more...
So If something goes wrong...if you leave only 399MB on HDD free...
..you didnt leave enough space to save, you got broken data...if windows try to save ...
and restore isnt possible,caused by data loss, could be in bad case more that you want to loss...
I would prefer
save your personal data (docs,pics,music,video,sheets..)
to external harddrive or usb device.. to prevent of data loss.
Or buy a new larger harddrive ..if u use the default drive .. dont know your size of HDD,
my original was a small 60 /80 GB HDD not enough for me ... all my Thinkpads are equipped with 320GB HDD exept one with SSD 120GB...
all devided in 2 parts for Windows Part & Data storage..
Partition C: 30GB enough room for any actual system leaves 22 GB left XP uses 8GB ...
...second part D: for all of my data... and backup of system part ..
and have more than one external HDD for backup ...
Use CCleaner after daily work is done to keep the system small and fast and do a systembackup one time a week,
with Acronis Trueimage done in 5-10 Minutes.. from time to time i copy this datafile to the external drive..
so that i have a rescue backup in a few minutes...
iam on the save side ...
so what about yours ... do you think your Thinkpad will save ?
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
Windows vista Error response-PLEASE HELP
Recently purchased a new computer w/Vista. Problem is that I couldn't transfer my songs from my old computer, so decided to use IGADGET to transfer from my IPOD. Error:retrieving the COM CLASS FACTORY for component w/CLSID. Please help if you have any idea how I can fix the error. I've installed Itunes 7.11 and reinstalled and it keeps happening.
I don't know about the originator, but I still require assistance. The help link didn't solve my issue, so further help would be welcomed.
I have Vista Ultimate (came with new computer), with the UAC turned off (it was interfering with Microsoft Money). I get the same popup error as noted before, and I've done the regsvr32 on vbscript.dll multiple times. I'm on an admin account, I've used an admin command window, and I've even tried running the iTunes setup as admin, as well as in compatibility mode as XP SP2.
I thought maybe my existing iTunes 7.0 install was interfering, so I tried to remove it via Control Panel, and I got the exact same error. So I can't remove what I have and I can't install the upgrade.
The only good news is that my iPod Photo finally started synching with the computer, if only in manual mode. I can't burn CDs however.
Assistance appreciated. Thanks. -
Hello, this is my first post.
Well lately I've been experiencing some connection issues with my iPhone 5s. I was on my iPhone just watching Youtube when my iPhone 5s disconnected, I tried to connect again by going to settings> Wi-FI> and then select my network as usual, but the weird thing is that my Wi-Fi network has changed it's name to Wireless, it used to be Wireless710. Also the password has been changed.
My computer can easily connect due to the fact that it is hardwired to the Wireless Cable Modem Gateway.
Extra Info:
Carrier is Sprint.
I am using Windows 7 Ultimate.
My Wireless Cable Modem Gateway is Netgear.
And now I am confused because when I open the small tab with the computer and a plug on the bottom right corner next to the speaker icon it says I'm not connected :/?! Here is a picture of it:
Note that I can not connect to it but am connected on my computer. It just disappeared on my phone and computer, I even unplugged my router waited for 20 seconds and connected it back in. Did it wok? for my computer yes again because it is hardwired, but my phone? No. Wireless 710 still won't show up. Is this a possible hack? Please help me as much as you all can, thank you very much.Log in to the router's console with a web browser from your computer. What kind of encryption did you have on the router? If it was WEP that's about as secure as no encryption. It should be WPA or WPA2. There has been an exploit reported in Netgear and Linksys routers that allows someone connected to the router if Remote Access to the console is enabled to take it over and install spyware on it.
Is it your router, or the cable providers? If it is yours it has been hacked. If it belongs to the cable provider they may have changed it to make it more secure. Call them.
And if it has been hacked and is yours the best thing to do is to throw it away and get a new, more secure router. Or you can try reflashing the firmware by going to Netgear's site and downloading a clean copy. -
I have a 5th gen 30gb video ipod which was fine up until the start of january when i tried to connect my ipod to my laptop and it was not recognised by windows as a usb device, i'v been through the device manager and can not find it there. USB port are fine as other things connect, i've tried 3 different usb cables. I've run diagnostics and got the following
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Inspiron 1501
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2008-01-15 13:16:51.
Video Display Information:
ATI Radeon Xpress 1150
** iPod Connectivity Tests **
iPodService 7.5.0.20 is currently running.
iTunesHelper 7.5.0.20 is currently running.
Apple Mobile Device 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.2.3
Serial Number: 8M6398VKV9K
Can someone please please please help me, i've run the 5 r's, i've tried to put it in to disk mode etc etc and still it will not connect.
it looks like many people are having this problem with the same model.
You can e-mail me direct on [email protected] if easier.Same as, although a new development on this last night, I borrowed a mates USB hub that has it's own mains power supply and for a short time my laptop recognised my IPOD, I obviously thought i had found the solutions as it started to sync at which point the smug smile left my face as i could smell burning plastic. Yep, the usb cable was melting in to the USB hub. so not only won't the sodding thing work properly it is a god **** fire hazard. Luckily our producst that cost hundreds of pounds are supported by friendly and helpful people at Apple!!!!!!!!!!!!
Oh and i downloaded itunes 7.6 last night and nothing.
PLEASE HELP!!!!!!!!!!!! -
Upgraded my itunes yesterday and it failed. Tried reinstalling and failed again. Now tried to install several earlier versions and coming up with windows error 126. Do you have any ideas on how I can fix this? Please help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99732) -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.
Maybe you are looking for
-
Hard Drive Data Recovery after Format
If, after using Disk Utility to re-format a hard drive, which software might be the best for recovering the data that was on the drive prior to formatting? Nothing has been written to the drive following the format.
-
When I try to download theupdate to iTunes, it goes through all the steps until the final one, then I get an error message "Verify that you have sufficient privileges to start system services", then the download stops. Any ideas on how to rectify thi
-
Image Sequencing in Quick Time Pro
Since upgrading to Snow Leopard I have been unable to get Quick Time Pro to created an Image Sequence. I'm wondering if this is an issue created by Quick Time Pro being moved to its new location in Snow Leopard. Can anyone, who's recently upgraded, t
-
How to reduce the number of Remote Gateway connections from one server
Hi , We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP se
-
Merge Many PDF files in several PDF Files
Hi, I have about 500 PDF Files : PDF_A1 PDF_A2 PDF_B1 PDF_B2 EtC. I want to Merge all my 500 PDF Files in 250 PDF files. I want to merge A1 with A2. B1 with B2 etc. Any idea to how to do ? Thank you