Windows patches install on unity server 5.0

How do you install window patches on unity servers
Sent from Cisco Technical Support iPad App

Hi Kirk
Cisco release patches for Unity as follows:
1) Windows Patches - go to cisco.com/go/software and search for Unity 5.0. In that section you'll see Microsoft Updates for Unity. There's a single .exe you can download that is released regularly that contains all the supported service packs, patches, and so on for Unity. Run it on the server console or via VNC to install it (a simple next/next/finish wizard), but remember to disable Cisco Security Agent if you run it before installing.
2) Unity patches are available but generally I wouldn't bother for a production system unless you are changing something in the environment already e.g. moving to a new Exchange version...
Aaron

Similar Messages

  • Is there any way I can know what are the list of patches installed on Indesign Server CS5

    Hi All,
    Is there any way I can know what are the list of patches installed on Indesign Server CS5?
    Please let me know if the there is any command to do so.
    Thanks,
    Manjunath

    Is this link any help?
    http://www.btvision.bt.com/on-demand/?cat=filmclub
    It seems to give the film club info.
    If you sort the list by "ending" date, shoul should be able to find recently added ones.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • GUI 7.20 patch install from Installation server causes PC to always reboot

    Hi All
    Each time i patch my Installation server I have an issue. Yesterday i downloaded PL8 for GUI 7.20, patched my server.
    My workstation for the notfication of an udate, so i clicked YES install, system reboots and installs. ALL WORKS!!
    But if a user does not click yes to update, ignores the message. The patch gets installed later on its own and reboots the desktop but it just cycles restarts. The PC will boot up until it gets to the login screen, then restarts, will do this for hours straight!!
    Its happen to me the last 3 patches. The fix i've been doing is booting to safe mode, removing the GUI and then reinstalling and all works fine.
    Like i said, people who are notified of updates and click YES are ok, its all the others where the GUI self installs the issue arises.
    Any tips? I currently have a PC on my desk doing it, i would like a work around instead of remove/reinstall of GUI.
    Edited by: Joshua Lacroix on Sep 14, 2011 9:14 PM

    NwSapSetupEngine.dll:     8.6.1.62
       NwSapSetupATLCommon.dll:     8.6.1.62
              NwSapSetupUi.dll:     8.6.1.62
                NwSapFeiUt.dll:     8.6.1.62
    And i patched my server with Patch 8 and my Gui is the following
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon for Windows
       720 Final Release
       7200.3.8.1067
       1271051
    And thats patch 8? So why the heck isnt the files properly coming down?
    I also checked the file version on my installation server is its the same 8.6.1.62, yet i have patch level 8 running.
    Let me try to reinstall patch 8 on the install server
    SO the install server complained that no new patches were found and again the main screen tells me Patch level 8 in the install server.
    Is their a hot fix to PL 8? Maybe thats what im missing?
    Edited by: Joshua Lacroix on Oct 18, 2011 2:14 AM

  • ISE Condition Windows with Latest Patch Installed

    Hello,
    I want to comply all the domain computer with latest windows Patch Installed. How we can create this condition under which catagry as mentioned below?
    Thanks.  

    Case Solution:
    You can deploy domain computer with latest windows Patch  Installed with Configuring WSUS Remediation.
    This example shows how to ensure that all employee computers  with Windows 7 have the latest critical
    Patches installed. Windows Server Update Services (WSUS) are  internally managed.
    Define a posture remediation action that checks for and  installs the latest Windows 7 patches.
    1. Navigate to Policy > Policy Elements > Results,  and expand the Posture folder.
    2. Expand the contents of Remediation Actions.
    Select Windows Server Update Remediation, and click Add from the right−hand pane menu.
    Enter these values, and click Submit:
    Attribute Value
    Name Install_Win_Critical_Updates
    Description Check and Install missing Critical Windows Updates
    Remediation Type Manual
    Validate Windows Updates using Severity Level
    Windows Updates Severity Level Critical
    Windows Updates Installation Source Managed Server
    Installation Wizard Interface Setting Show UI
    Note: If you want to use Cisco rules in order to  validate Windows update, create your posture
    Conditions, and define your conditions in Step 2.
    2. Click Save when finished.
    Note: If a preconfigured condition does not  display under the list of conditions, verify that the appropriate OS has  been selected for both the condition as well as the requirement rule.  Only conditions that are the same or are a subset of the OS selected for  the rule display in the conditions selection list.
    Please check below  which may be helpful for you.
    http://www.cisco.com/image/gif/paws/116143/116143-config-cise-posture-00.pdf

  • SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

    Using SCCM 2012 R2, I am having a problem getting Windows updates to install.  Applications published to people work, and basic software installations published to machines for a straight install work.  However, both Windows patches and Adobe patches
    fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
    installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try.  All of those are Windows 7 PCs, incidentally. On Adobe patches,
    one PC fails and the other 3 machines still sit in Unknown status.  Certificates are distributed,
    Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
    Thanks,
    Andy Maslin

    An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
    indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
    Jason | http://blog.configmgrftw.com

  • How to do patch upgradation in citrix server ?

    Dear all,
    How to do patch upgradation in citrix server (SAP B1 2005B PL41 to PL49) ?
    Whether i also need to do same in db server ?
    Jeyakanthan

    Hi Jayakanthan,
    Patch Upgrade is done on SAP Server only.After Completion of Patch 49 upgrade in SAP Server
    then open SAP B1 in server machine it start to upgrade DB after completed DB Upgrade
    In Citrix Server open the SAP B1 it start the upgrade process after completed
    restart the citrix server.
    There is no separate Patch instalation in citrix server.
    in Citrix server SAP client only installed so you can just open the
    SAP B1 in citrix server and other client machine also it automatically start to
    upgrade.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Cannot revert to Windows 8 after installing Hyper-V Server 2012 R2

    I own a laptop with a pre-installed Windows 8. I've installed Hyper-V Server 2012 R2 on top of it by mistake, and now I would like to get rid of it and revert it back to Windows 8. I've tried doing so by a backup USB, though it doesn't seem to work. Is there
    anyway to do this without having to use a disc? I haven't received one when I bought it.
    Thanks for any help in advance.

    Found something for specific computer. Find similat info for your computer:
    Acer Recovery Instructions:
    1) Power on the machine
    2) At the ACER BIOS screen, press and hold the 'Alt' key and the 'F10' key simultaneously to start Acer eRecovery.
    3) Once eRecovery utility is displayed, click 'Restore to Factory Default Settings'.
    4) Click 'OK' to continue
    5) The recovery process restore a fully functional factory image of Windows.
    6) After eRecovery has completed, press 'OK' to reboot the computer.
    Acer Recovery Media Purchase Program:
    https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer
    This site is used for purchasing recovery media for your Acer product. 
    To get started, please enter the serial number or SNID located on your Acer product and click "Next"
    System Information
    Get your system information:
    http://secure3.tx.acer.com/FindSystem/FindSystem.aspx?title=Information%20About%20Your%20System
    Acer Main Support page:
    http://www.acersupport.com/
    Regards
    Milos

  • Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

    Hello there-
    I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
    Is there any limitation on this sense? Any documentation about it?
    Thanks and appreciate your answers.
    Regards,
    Gustavo Ortega
    Software Engineer

    Hello,
    Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
    Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
    Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
    Roles needed in IIS 7.0/IIS 7.5.
    Common HTTP Features
    Static Content
    Default Document
    Directory Browsing
    HTTP Errors
    HTTP Redirection
    Application Development
    ISAPI Extensions
    ISAPI Filters
    Health and Diagnostics
    HTTP Logging
    Logging Tools
    Request Monitor
    Tracing
    Custom Logging
    ODBC Logging
    Security
    Basic Authentication
    Windows Authentication
    Request Filtering
    Note : Anonymous Authentication should be enabled.
    Performance
    Static content Compression
    Dynamic Content Compression
    Management Tools
    IIS Management Console
    IIS Management Scripts and Tools
    Management Service
    IIS 6 Management Compatibility
    IIS 6 Metabase compatibility
    IIS 6 WMI Compatibility
    IIS 6 Scripting Tools
    IIS 6 Management Console
    Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
    larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
    setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
    The following command can be used to set the parameter from the command prompt, please
    change the directory to Windows\System32\inetserv and then execute the command.
    appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
    The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
    after execution of this command.
    Also, are you using Maxdb to store the files or is it a "flat files" content server  ?
    HTH.
    Steve.

  • Windows Patches installation fail on Windows Server 2008 R2

    Dear MS support
    We met a problem that we could not install any Windows patches on 3 Windows 2008 R2 Servers.
    Below is the Screen shot. Any Advice?
    Thanks
    Zi Feng
    TechNet Community Support

    Hi,
    Have you tries the fix:
    Error code 0x80000FFFF when you download updates on a Windows Vista-based computer by using Windows Update or Microsoft Update
    http://support.microsoft.com/kb/946414
    Hope this helps.

  • Installing Oracle Application Server 10g 101202 on Windows 2008 64 bit

    Hi All,
    what i need to do is install this software like this:
    installing Oracle Infrastructure to handel Sessions as db for oracle forms & reports
    install Oracle Forms & Reports Service as Middle-Tire on the same machine in defirent home
    configure my report server as i require it to work with rdf files in spechial folders
    i have done this installation more than i can remember in Windows 2003 R2 SP2 32 bit
    but for Windows Server 2008 i am facing some problem that there is no software avilable for 64 bit or Windows 2008 in Oracle Download Site
    Spechilaly when my server is not itanum !
    Can any one point me to the right download page if avilable or another solution for this problem
    i don't think that oracle have stopped support for this product spechilaly when the reports generated by Oracle Report Service is far to good and fast with Oracle Database
    Best Regards
    Ibrahim

    Hi Ibrahim,
    You should decide what you require.
    32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
    The "problem" is that you would not gain any performance benefit from the 64bit server
    If you want to have benefit you can upgrade the JVM to 64 bit version.
    I did this 3 years ago and I do not remember exact steps though everything worked OK.
    WARNING:
    this  can be unsupported, ask support to be sure
    - Install the 32 bit version on the server
    - Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
    - later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
    try to search the forum, there had been a thread with the same question
    regards, michael
    Edited by: MickleSh on Sep 27, 2011 9:59 AM

  • Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
    Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
    Better practice however is to use a dedicated machine and use remote desktop to the server.
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • "BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2

    I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_FILTER created
    (DB) INFO: BADI_FILTER~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_IMPL created
    (DB) INFO: BADI_IMPL~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
    (IMP) ERROR: EndFastload: rc = 2
    Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
    Thanks in advance,
    Michael

    Set BCP_LOB=1 in your system environment
    Note 1156361 - R3load: Fastload doesn't support LOB-columns
    Markus

  • Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?

    I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
    I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
    So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?

    I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
    I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
    So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
    Yes you can install SQL server 2008 express on windows 2012 OS see below link
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Instalation of SQL server 2005 Backward compatibility components in Windows Seven

    Anyone can help me to install de SQL Server 2005 Backward Compatibility componentes in Windows 7 home, Intel Core Duo
    It say that is not compatible.
    Thanks in advance.

    Hi,
    We can see this feature pack was issued in Nov 2005 from the site, which may not be updated
    to add Windows Vista/7 to supported operating systems. However, I can download and install X64 (64-bit)
    Microsoft SQL Server 2005 Backward Compatibility Components on Windows 7 Enterprise 64-bit successfully.
    If you get any error while installing, please let me know.
    Thanks,
    Chunsong
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • How to install the oracle patch in the HP_ux server.

    Hi,
    we are  using oracle server 9.2.0.8. We are decided to install the oracle patch in the oracle server.
    How to install the oracle patch?
    Please suggest me,
    Urgent.
    Regards
    S.Prasad

    hi,
    left upper corner on this forum.
    there is a box that "says" Search
    It is very easy to use, it is not necessary to be an Engineer.
    apart of the notes, there is (at least) one EXACT query like yours:
    [O patch apply procedure in Hp-ux and IBM aix|Re: O patch apply procedure in Hp-ux and IBM aix]

Maybe you are looking for