Windows Patches installation fail on Windows Server 2008 R2

Dear MS support
We met a problem that we could not install any Windows patches on 3 Windows 2008 R2 Servers.
Below is the Screen shot. Any Advice?
Thanks
Zi Feng
TechNet Community Support

Hi,
Have you tries the fix:
Error code 0x80000FFFF when you download updates on a Windows Vista-based computer by using Windows Update or Microsoft Update
http://support.microsoft.com/kb/946414
Hope this helps.

Similar Messages

  • Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

    Hello
    I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
    However when attempting to install the Client Access role, setup fails with the error below.
    Does anyone know of a way to get around this please?
    I have already searched for this error and not found any similar threads.
    Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
    Thanks
    Robin
    [code]
    Summary: 4 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:00:01
    Preparing Setup
    Completed
    Elapsed Time: 00:00:00
    Client Access Role
    Failed
    Error:
    The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
    Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
    Access is denied.
    Elapsed Time: 00:00:01
    Mailbox Role
    Cancelled
    Finalizing Setup
    Cancelled
    [/code]
    Robin Wilson

    Hello
    Thanks for all the replies.
    I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
    Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
    For info last time when it failed to work:
    - Installed Windows Server 2008 R2
    - Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
    - Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
    - Installed IIS and Application Server role
    - Installed Hyper-v role
    - Installed Desktop Experience feature
    - Installed Exchange and recieved the error
    When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
    I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
    I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
    I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
    Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
    Thanks
    Robin
    P.S. Sorry it's taken me a while to reply!
    Robin Wilson

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Oracle Patch 10.2.0.4 error - Windows Server 2008 x64

    Hello!
    Could you please give your comments if you have seen errors described below? It appeared during the Oracle Patch 10.2.0.4 installation in Windows Server 2008 x64.
    *************installActions2010-08-06_11-02-02PM.log******************
    Using paramFile: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.0
    Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
    All installer requirements met.
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ../stage/Components/oracle.swd.jre/1.5.0.11.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The commandline for unzip:
    C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\install\unzip -qqqo ..\stage\Components\oracle.swd.oui.core\10.2.0.4.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM"
    The number of files bootstrapped for the jre is 551.
    The number of files bootstrapped for the oui is 71.INFO: Environment Variables:
    INFO:      ORACLE_HOME =
    INFO:      PATH = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Acronis\BackupAndRecovery\;H:\oracle\S50\102
    INFO:      CLASSPATH =
    INFO: Username:Administrator
    INFO: Install area Control created with access level 1
    INFO: Oracle Universal Installer version is 10.2.0.4.0
    INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
    INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
    INFO:
    *** Welcome Page***
    INFO: Initializing install inventory
    INFO: Setting up install inventory
    INFO:
    *** Specify Source Location Page***
    INFO: Initializing OUI Shiphome access setup
    INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
    INFO: fetch the file: C:\ORACLE_Patch_10.2.0.4_Windows\WINDOWS_X86_64\p6810189_10204_MSWIN-x86-64\Disk1\stage/shiphomeinfo.properties
    INFO: Performing operation for OUI Shiphome access setup
    INFO:
    *** Select a Product to Install Page***
    INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.patchset.db, 10.2.0.4.0, >10.2.0.4.0, [ ][OH:2]'. Received the value from the default settings.
    INFO:
    *** Select Installation Type Page***
    INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
    INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom'. Received the value from the default settings.
    INFO: install properties filename: C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/oracle.patchset.db_Custom.properties
    INFO:
    *** Specify Home Details Page***
    INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'H:\oracle\S50\102'. Received the value from the UI page.
    INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'S50102'. Received the value from the UI page.
    INFO: Initializing OUI Oracle Home access setup
    INFO: Setting variable 'ORACLE_HOME' to 'H:\oracle\S50\102'. Received the value from the UI page.
    INFO: Loading shiphomepropertiesfrom C:\Users\ADMINI~1\AppData\Local\Temp\OraInstall2010-08-06_11-02-02PM/shiphomeproperties.xml
    INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
    INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rat_10.2.0.4.0' to 'H:\oracle\S50\102/oracle_prod'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.sysman.ccr_10.2.7.1.0' to 'H:\oracle\S50\102/ccr'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.5.0.11.0' to 'H:\oracle\S50\102\jdk'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.4.0' to 'H:\oracle\S50\102\oui'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.4.0' to 'H:\oracle\S50\102\OPatch'. Received the value from the variable calculation.
    INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.5.0.11.0' to 'H:\oracle\S50\102\jre\1.5.0'. Received the value from the variable calculation.
    INFO: Performing operation for OUI Oracle Home access setup
    INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
    INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
    INFO: This is not a cluster system.
    INFO: Node selection page will not be shown.
    INFO: Defaulting prerequisite location to 'C:/ORACLE_Patch_10.2.0.4_Windows/WINDOWS_X86_64/p6810189_10204_MSWIN-x86-64/Disk1/stage/prereq'.
    INFO:
    *** Product-Specific Prerequisite Checks Page***
    INFO: Entry point:oracle.patchset.db_Custom
    INFO: Starting Prerequisite checks : Fri Aug 06 23:04:20 EEST 2010
    INFO: Checking checkToInstallCCR
         This is a prerequisite condition is to check if the ccr component need to be installed or ignored for installation.
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Checking CompatibilityChecks
         This is a prerequisite condition to check whether the Oracle Home specified by the user already contains any installed product which is incompatible with the product being installed.
    INFO: Check complete. The overall result of this check is: Passed
    INFO: --------------------------------------------------------------------------------
    INFO: Prerequisite checks completed : Fri Aug 06 23:04:20 EEST 2010
    INFO: oracle.ons Product Location: Empty path specified.
    INFO: oracle.sysman.repository.db Product Location: Empty path specified.
    INFO:
    *** Language Selection Page***
    INFO:
    *** Specify Local Host Name Page***
    INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to '79SSO-LS'. S_LOG_VAR_VALTYPE_CLONE
    INFO: Setting languages [fi, en] for patch 'Oracle Notification Service Patch 10.2.0.4.0 '
    INFO: Setting languages [fi, en] for patch 'Enterprise Manager Repository DB 10.2.0.4.0 '
    INFO: *** Entering Component: oracle.ons installation
    INFO: Setting variable 's_sharedOH' to 'false'. Received the value from the variable calculation.
    INFO: Setting variable 's_patchtmpLocation' to ' '. Received the value from the variable calculation.
    INFO: Setting variable 's_opmnRemotePort' to '6200'. Received the value from the variable calculation.
    INFO: Setting variable 's_opmnLocalPort' to '6101'. Received the value from the variable calculation.
    INFO: Calling Query generalQueries10.2.0.2.0 getOSName
    SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :
    "C:\Program Files\Oracle\Inventory\logs\installActions2010-08-06_11-02-02PM.log"
    "C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.err"
    "C:\Program Files\Oracle\Inventory\logs\oraInstall2010-08-06_11-02-02PM.out"
    INFO: User Selected: Yes/OK
    *************installActions2010-08-06_11-02-02PM.log******************
    **************oraInstall2010-08-06_11-02-02PM.err***********************
    Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
    java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
         at getOSName.performQuery(getOSName.java:16)
         at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2498)
         at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject_s_operatingSystem(Unknown Source)
         at Patches.oracle.ons.v10_2_0_4_0.CompContext.getCalculatedValueObject(Unknown Source)
         at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:646)
         at oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:1477)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2430)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3844)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
         at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
    **************oraInstall2010-08-06_11-02-02PM.err***********************
    ***************oraInstall2010-08-06_11-02-02PM.out**************************
    **************oraInstall2010-08-06_11-02-02PM.out*************************

    A similar error is mentioned in MOS Doc 840965.1 (Upgrading Agent 10.2.0.3 To 10.2.0.4 Using OUI Is Failing With "Abnormal program termination") - not sure if the scenario and solution can help in your case.
    HTH
    Srini

  • Installation problem on windows server 2008 r2 datacenter edition 64bit

    hi
    today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
    because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
    so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
    this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
    why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
    thanks for feedbacks!
    regards, jan

    > no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
    If you take the time to give exact error messages then someone will be certainly able to help
    > on windows server 2003, there are NO problems.
    Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
    I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
    Markus

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • Installation Server Slow on Windows Server 2008 R2

    Previously I had two identical servers setup to service SAPGui installs in our corporate office.  Both were configured for SAPGui 7.20 Patch 3 and the servers were Windows Server 2003 SP2.
    Recently one of these servers was replaced with a newer/faster with more memory Windows Server 2008 R2 box.
    I immediately noticed installs to front ends were taking longer when run off the 2008 system.  Today I timed installs to two identical front end Win XP computers.
    Server 2003 SP2 installed in 7 minutes.
    Server 2008 R2 installed in 23 minutes.
    Has anyone else experienced this?
    Bob H

    I have no doubt that the problem in the OS localization.
    But, taking into account some facts:
    World population is estimated to number 7.126 billion people.
    Anglosphere is about 740 million people.
    I have not found information about the supported OS languages.
    I'm worried about losing my non-English data.
    I am for the licensed software, but a trial and registered OS has the same functionality, and displays messages/data in the same way.
    I doubt that the OS registration will allow installer to properly finish and even display the error correctly. (Java strings is UTF-based, so, developers should set correct code page. Probably, because system code page can be different with console code page (cp866 for Russian). Current codepage could be view by executing "chcp" in console).
    In any case Enterprise-class product should operate correctly on each supported systems, or inform about problems before.

  • Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

    My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
    I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
    Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
    Thank you very much!

    Hello Jackcd,
    I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
    "I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
    The Sapinator

  • Webi scheduling error in BO 4.0 SP04 after security patch updates in windows server 2008 R2

    We are getting  below error in BO 4.0 SP04 Web Intelligence report scheduling after security patch updates in windows server 2008 R2
    while trying to invoke the method com.businessobjects.sdk.core.server.IServer.getServerContext() of an object returned from com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.getServer(com.businessobjects.sdk.core.context.IContext, com.businessobjects.rebean.wi.model.engine.IDocumentInstance)
    We have reverted back security patch but still giving above scheduling problem in  BO 4.0 SP04 WebI and we can view and refresh report.
    Is there any way to fix the scheduling problem in BO 4.0 SP04 WebI?

    HI,
    Check SAP notes if they will help you.
    1934855 - Scheduled Web Intelligence documents fail with com.businessobjects.sdk.core.server Error
    1916443 - Scheduling Web Intellignce reports which are having long names to excel and pdf fails.
    1792921 - Unable to schedule Webi documents in Excel or PDF format

  • Windows 2008 Standard SP2 inplace upgrade to Windows Server 2008 R2 Standard SP1 failing

    Hi All,
    I'm encountering an issue with performing an in-place upgrade of Windows Server 2008 SP2 to Windows Server 2008 R2 SP1.
    Server details:
    Virtual machine running on VMware ESXi 5.
    Uninstalled AV and backup software
    Domain controller also running AD Certificate Services#
    UAC disabled
    Running setup as a domain admin
    When launching setup, the process completes "Copying Windows Files". After a few seconds or being on "Gathering files, settings and programs 0%", an error appears on screen -
    Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
    Error code: 0xC0000005
    Errors and information up to the fatal errors in the setupact.log setup summary:
    2013-04-28 19:26:35, Info                  MIG    Loading replacement manifest data for Microsoft-Windows-WMI-Core
    2013-04-28 19:26:35, Info                  MIG    Loading replacement manifest data for Microsoft-Windows-WSRM-Service
    2013-04-28 19:26:35, Info       [0x080841] MIG    UPGCSIAgent: Enumerating installed manifest source using C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll
    2013-04-28 19:26:35, Warning    [0x080405] MIG    EnablePrivilege: AdjustTokenPrivileges failed (Error:0x514)
    2013-04-28 19:26:35, Info                  CSI    00000001@2013/4/28:18:26:35.866 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7feeff78c85 @0x7fef1646a4e @0x7fef1646676 @0x7fef1647a53 @0x7fef164c291
    @0x7feedd728ba)
    2013-04-28 19:26:35, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
     Minidump attached (107516 bytes).
    2013-04-28 19:26:36, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
     Minidump attached (107788 bytes).
    The diagerr.xml has the two minidumps but they are just encoded straight into the xml file. Thanks for any assistance. /Ashley

    Hi,
    Generally such kind of issues are caused by third party programs such as CD burning programs, device driver etc.
    First please refer to this article to see if there is anything helpful:
    Guide for Upgrading to Windows Server 2008 R2
    http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx
    Meanwhile from the description, it mentioned a file under  C:\Windows\winsxs. Check the permission of the folder amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6 and the file wcp.dll to see if the permission
    and ownership are correct compare with the other folders.
    Also as it provided 2 minidump files, you will need to use WinDBG to read the minidump files and see if there is any further information.
    http://support.microsoft.com/kb/315263
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Windows Server 2008 backups failing

    I have a Windows Server 2008, fully patched that backups recently started to fail and now, we are unable to open the Windows Server Backup. Also unable to open Disk Management or any other applications requiring Virtual Disk.
    Attempts to start VDS from service or command line result in the following errors:
    1:           
    A timeout was reached (180000 milliseconds) while waiting for the Virtual Disk service to connect.
    2:           
    The Virtual Disk service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
    I added the debuglog to registry and the $vds$.log only records the following:
    (PID:8988,TID:10060,17:32:43) ERROR: CVdsLoader::LoadService, 3, hr=8007041D
    I have also increased the timeout dramatically to no avail.
    SFC /scannow returns:
    Windows Resource Protection found corrupt files but was unable to fix some of them.
    Nothing requiring Virtual Disk Service will operate making backups and imaging impossible.
    Any thoughts?

    Hi,
    As SFC could find some issues (but fail to fix), please try to DISM could help as well:
    DISM.exe /Online /Cleanup-image /Restorehealth
    Fix Windows corruption errors by using the DISM or System Update Readiness tool
    http://support.microsoft.com/kb/947821
    Also though the following hotfix is not specific for this error, it helps updating VDS components. Please try it and see if issue persists after installing it. 
    Virtual Disk Service (VDS) crashes when you try to extend a dynamic volume in an NTFS file system on a computer that is running Windows Vista, Windows Server 2008, Windows Server 2008 R2, or Windows 7
    http://support.microsoft.com/kb/975680
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error while performing SAP Installation in HA Env on Windows Server 2008

    Hello,
    I am performing a SAP Installation in HA Environment on Windows Server 2008. I am at the ASCS installation step.
    As per the guide before installing ASCS there are some activities to be carried out on Failover Cluster Management.
    I have done all the steps except one as per the guide. I am stuck in the Add FileServer Step. In this step the guide says to go to the Dependencies tab and add the cluster disk resource to the dependencies list. It also says to add the Name:Virtual NetworkName to the dependencies list.
    Now in my scenario I have 3 shared drives for SAP and I have added each of them in the dependencies list of the new FileServer. The only problem is how do I add the Name:Virtual NetworkName to this list
    When I continue without giving the Network name the system issues a warning "This resource requires dependencies on instances of the following resource types or classes:Network Name. Not adding these dependencies will prevent the resource from working properly. Do you want to save the current settings anyway"
    If I click on Yes and bring this resource online it fails with this error message
    "The action Bring this resource online did not complete.An error occured while attempting to bring the resource 'SAPECC FileServer online'. The cluster resource could not be brought online by resource monitor."
    My question is how to add the Name:VirtualNetworkName to the dependencies list of the FileServer.
    Regards
    Mitesh Nair

    Hi,
    I have resolved the issue with the help of cluster admin
    Regards
    Mitesh

  • Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

    I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
    I have checked that I have extracted the following assemblies:
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
    Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
    I have run this same set of files on another server and Weblogic was installed. Am I missing something?

    I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

    I have the following:-
    VMWare workstation version 9 , with windows server 2008 R2 data center installed.
    - I have installed the windows 2008 R2 inside the VM using an iso image.
    - The host is windows 7.
    I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
    ramdisk device creation failed sue to insufficient memory.
    And on the windows boot manger screen they mentioned to :-
    inset my windows installation dis and restart my PC.
    click “repair your computer”
    but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
     is 24 GB & 80 GB hard disk.
    The error is 
    Link.
    so can any one advice what is causing this error?
    Thanks

    You might start by checking the RAM.
    http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Every PATCH installation fails after installing Windows Updates

    Hello,
    I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
    Here is the test case:
    1. install a fresh copy of Windows on a test machine
    2. install all available Windows Updates (so the system is up to date)
    3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
    4. install the MSI from the online location using a command line like this:
    msiexec /i http://server/share/package.msi
    5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
    6. install the v1.0.1 patch
    RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
    NOTES:
    1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
    2. the issue is not replicated on a fresh installation of Windows without Updates applied
    Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
    Thx,
    Daniel

    Hello,
    I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
    Here is the test case:
    1. install a fresh copy of Windows on a test machine
    2. install all available Windows Updates (so the system is up to date)
    3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
    4. install the MSI from the online location using a command line like this:
    msiexec /i http://server/share/package.msi
    5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
    6. install the v1.0.1 patch
    RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
    NOTES:
    1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
    2. the issue is not replicated on a fresh installation of Windows without Updates applied
    Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
    Thx,
    Daniel

Maybe you are looking for

  • Photosmart C3180 is constantly printing purple instead of black?

    I thought that it was simply running out of ink, so I bought a new cartridge. After I replaced it, the printer is still printing black text as purple?

  • Displaying more than one icon in a dialog.

    How can display a dialog that contains more than one icon?

  • Concatenate text to field value in report header

    I'm trying to concatenate text to field value in a textbox in the report header but am getting an error.  Here's how I'm doing it: =First(Fields!Pp_Name.Value, "dsProspect") & "Prospect" and the error says the report definition is invalid.  An unexpe

  • Can't open Numbers document

    I spent almost 3 hours building a document, saving all along the way.... closed and opened it .... then changed the file name on my desktop, and now I can't open the file. I get the message The document "target.numbers could not be opened" In finder,

  • IPod shuts down immediately on USB connection

    I have a 5th gen 30gb. My iPod works fine to play music and I can see the menus and all. But the instant that I connect it to any USB port on any Windows XP computer using several different cables, it shuts down. The shutdown causes what looks to me