Windows Patching - Error when logging in - "The Specified procedure could not be found"

Hi,
I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new
local account (via my machine remotely), but still no luck. Have checked Event Viewer and Windows Update but cant see where it failed. Been checking the net for fixes but no luck. The machine is a Windows 7 SP1 Enterprise 32 bit, info for server if needed
is SCCM 2012 R2. I have attached the WindowsUpdate log, incase that can help? I dont want to spend ages removing previous updates (via SCCM) as I dont have the time!
Wont let me attach the windowslog!If any one can help, be great!

Hi,
Let's make clear your issue.
Did you logon these 3 computers?
Have you tried to install the Windows Update manually for these 3 computers?
If no, have a try.
If yes and the error still persists, try to
reset Windows Update components for test.
Karen Hu
TechNet Community Support

Similar Messages

Win 7 IE10 "Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."

Hi All,
I am testing some Windows 7 builds with IE10 installed and when I do a Resultant Set of Policies on them they all have an error in the user section of the GPOs as shown in the image.
To investigate I unlinked all the IE policies from the OU and rebuilt the PCs and wiped the user accounts' roaming profiles (local already wiped with the format of the HDD for the rebuild) but still get the same error even with no IE policies
applied. I have looked through RSOP and there are no settings applied either under the maintenance section or under Admin Templates > Windows Components > Internet Explorer.
Please can someone fill me on how to stop this error from showing?
Thanks

Hi Robert,
As I mentioned in my original post I see that message being "produced" when I run RSOP.msc and generate the results. I probably should have posted this image in as you can see what section is affected -
I've been digging around in the event viewer and have found this multiple times throughout.
This is an IE install downloaded directly from Microsoft.com. I've uninstalled it, rebooted,, re-downloaded again and re-installed it and am still getting the same output. If I leave IE8 on the PC I don't get this issue at all. We've not used the IEAK
to configure it in any way.
The problem occurs with the client trying to apply IE policies via group policy. I can only see the error when I run RSOP and generate an output.
Another issue I've found is that it won't apply the proxy settings via group policy preferences IE control panel section - I'm having to use reg entries instead. I found this post with people having the same issue with the same error -
http://social.technet.microsoft.com/Forums/windows/en-US/7efbd672-8196-4053-8167-d94da5d2f939/bypass-proxy-exceptions-are-not-coming-in-windows-8-thorugh-group-policy?forum=w8itprogeneral
Which text file should I be looking for to trace it back from?

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

RUNDLL, error loading c:\documents the specified module could not be found

Hi! I am new here and really need your help. We have a few Lenovo T400 notebooks. If I want to install Windows XP Prof with SP3 I always get this error dialog during GUI mode setup 9 Min. before finishing.
RUNDLL, error loading c:\documents the specified module could not be found
We install this version of Windows on other notebooks without error. The logs show nothing special.
Nothing really happens but it's looks bad for our customers. I think I am not alone because there are more
entries in different forums with same problem without solution.
Every help is appreciated. Thanks!

Thanks for your reply! But the list of hotfixes on Microsoft Knowledge Base includes this hotfix?
List of fixes that are included in Windows XP Service Pack 3
888111 (http://support.microsoft.com/kb/888111/ ) Universal Audio Architecture (UAA) High Definition Audio class driver version 1.0a available for Windows XP, Windows Server 2003, and Windows 2000 Hotfix
http://support.microsoft.com/kb/946480/en-us
Sorry, we use Windows XP SP3 with this hotfix included. All of our other hardware which needs this hotfix too works fine with SP3.

Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (...SQORA32.DLL).

I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
It is a classic ASP website. I added a "testdatabase" page to the website to test the basic functionality of opening a connection. I've pasted the testdatabase page below. Anyways, upon running this page, I get this error:
Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
I have two other environments where I have done the same upgrade and the site works just fine. I have compared all the IIS settings in my other environments to that of the one suffering from the error. Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides.
I have also checked to make sure the environment variables are correct.
The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct. I've checked this in both of the working environments and there is nothing there. There is also nothing there in the broken environment. What should be there? If anything?
I don't know where else to look. What could be causing this error?
<%
Option Explicit
Response.Expires = 0
Response.Buffer = true
Dim conn
Err.Clear
On Error Resume Next
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
If Err.Number <> 0 Then
Response.Write (Err.Description & "<br><br>")
Response.End
conn.Close
Set conn = Nothing
End If
conn.Close
Set conn = Nothing
On Error GoTo 0
%>

As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.

ImportError: DLL load failed: The specified procedure could not be found.

Hi,
I am new to Python. I'd like to try and connect to Oracle 10.2.0.4 database using Python. I have Oracle 10g client installed. When I try to import cx_Oracle I get the error below.
If anyone can help me how to solve this, I will be grateful.
C:\Users\milivojm>set path
Path=C:\Oracle\OraClient10g\bin;C:\Oracle\OraClient10g\jre\1.4.2\bin\client;C:\O
racle\OraClient10g\jre\1.4.2\bin;C:\Oracle;C:\Oracle\OraOdac11g;C:\Oracle\OraOda
c11g\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program File
s\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\CollabNet Subversion;C:\P
rogram Files\jZip;C:\Program Files\QuickTime\QTSystem\;D:\Python\
C:\Users\milivojm>python
Python 2.6.2 (r262:71605, Apr 14 2009, 22:40:02) [MSC v.1500 32 bit (Intel)] on
win32
Type "help", "copyright", "credits" or "license" for more information.
import cx_OracleTraceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: DLL load failed: The specified procedure could not be found.
exit()C:\Users\milivojm>dir c:\Oracle\OraClient10g\bin\
Volume in drive C has no label.
Volume Serial Number is B0A4-2659
Directory of c:\Oracle\OraClient10g\bin
21.11.2008 15:29 <DIR> .
21.11.2008 15:29 <DIR> ..
06.03.2004 03:19 108.920 cemutls.exe
27.01.2004 04:49 86.124 COREJAVA.DLL
21.11.2008 15:28 1.024 emca.bat
08.03.2004 17:15 52.552 extjob.exe
08.03.2004 17:15 52.552 extjobo.exe
07.02.2004 22:52 28.672 launch.exe
21.11.2008 15:27 659 lbuilder.bat
27.01.2004 06:47 81.948 LCSSCAN.EXE
27.01.2004 06:46 43.064 LMSGEN.EXE
08.03.2004 17:12 16.656 loadpsp.exe
06.03.2004 03:20 96.592 lsnodes.exe
27.01.2004 06:46 68.556 LXEGEN.EXE
27.01.2004 06:46 276.908 LXINST.EXE
21.11.2008 15:28 484 mkstore.bat
21.11.2008 15:27 1.149 netca.bat
21.11.2008 15:27 108 netca_deinst.bat
08.03.2004 17:59 188.416 oci.dll
08.03.2004 17:16 32.768 ociw32.dll
10.02.2004 13:13 110.592 ODBTREEVIEW.OCX
21.04.2005 04:13 864.256 oip10.dll
21.04.2005 04:05 75.500 oip10.tlb
21.11.2008 15:27 525 olsadmintool.bat
21.11.2008 15:27 546 olsoidsync.bat
10.02.2004 13:12 73.728 OO4OADDIN.DLL
10.02.2004 13:12 69.632 OO4OCODEWIZ.DLL
10.02.2004 13:12 20.480 OO4OCODEWIZ.EXE
21.04.2005 04:05 24.576 oraansi10.dll
21.11.2008 15:27 34 oracle.key
05.03.2004 19:15 20.480 OracleAdNetConnect.exe
05.03.2004 19:15 24.576 OracleAdNetConnectRCUS.dll
05.03.2004 19:16 24.576 OracleAdNetTest.exe
05.03.2004 19:16 24.576 OracleAdNetTestRCUS.dll
08.03.2004 16:39 1.909.008 oraclient10.dll
21.04.2005 04:14 241.664 oraclm32.dll
10.03.2004 16:09 749.840 oracommon10.dll
27.01.2004 04:49 688.400 ORACORE10.DLL
06.03.2004 03:16 57.616 oradbcfg10.dll
10.02.2004 13:17 386 oradc.lic
21.04.2005 04:13 102.400 oradc.ocx
08.03.2004 16:39 4.235.536 orageneric10.dll
14.03.2004 10:43 327.952 orahasgen10.dll
26.03.2004 17:11 77.824 oraimr10.dll
05.03.2004 19:14 45.056 orajmisc.dll
27.01.2004 17:16 278.800 oraldapclnt10.dll
27.01.2004 17:16 258.320 oraldapjclnt10.dll
27.01.2004 06:46 37.136 ORALXLED.DLL
05.03.2004 19:25 946.448 oran10.dll
05.03.2004 19:15 37.136 oranad10.dll
05.03.2004 19:11 33.040 oranbeq10.dll
05.03.2004 19:12 24.848 ORANCDS10.DLL
05.03.2004 19:11 94.480 orancrypt10.dll
05.03.2004 19:11 24.848 oranhost10.dll
05.03.2004 19:11 33.040 oranipc10.dll
05.03.2004 19:12 143.632 oranjni10.dll
05.03.2004 19:11 180.496 oranl10.dll
13.03.2004 03:40 74.000 oranldap10.dll
10.03.2004 20:42 33.040 oranldapj10.dll
27.01.2004 06:45 586.000 ORANLS10.DLL
12.03.2004 01:23 1.544.353 oranmemso.dll
05.03.2004 19:11 33.040 orannmp10.dll
05.03.2004 19:12 28.944 orannzentr10.dll
05.03.2004 19:12 28.944 ORANNZMCS10.DLL
05.03.2004 19:11 962.832 orannzsbb10.dll
05.03.2004 19:12 53.520 oranoncj10.dll
05.03.2004 19:10 221.456 oranro10.dll
05.03.2004 19:12 37.136 oransgr10.dll
05.03.2004 19:11 49.424 orantcp10.dll
05.03.2004 19:12 49.424 ORANTCPS10.DLL
05.03.2004 19:11 24.848 orantns10.dll
05.03.2004 19:13 28.944 oranzts10.dll
06.03.2004 03:16 209.168 oraocr10.dll
14.03.2004 20:50 147.728 oraocrb10.dll
21.04.2005 03:54 438.272 OraOLEDB10.dll
21.04.2005 03:54 1.608 OraOLEDB10.tlb
21.04.2005 03:55 24.576 OraOLEDB10us.dll
21.04.2005 03:53 131.072 OraOLEDBgmr10.dll
21.04.2005 03:54 32.768 OraOLEDBpus10.dll
21.04.2005 03:45 24.576 OraOLEDBrfc10.dll
21.04.2005 03:46 24.576 OraOLEDBrmc10.dll
21.04.2005 03:53 139.264 OraOLEDBrst10.dll
21.04.2005 03:43 24.576 OraOLEDButl10.dll
21.11.2008 15:28 483 orapki.bat
08.03.2004 17:07 1.052.944 ORAPLP10.DLL
08.03.2004 17:06 2.867.472 ORAPLS10.DLL
04.02.2004 00:10 28.944 ORASLAX10.DLL
27.01.2004 06:46 69.904 ORASNLS10.DLL
11.03.2004 21:35 483.600 ORASQL10.DLL
09.03.2004 21:46 61.712 orasrvm10.dll
06.03.2004 03:17 143.632 orasrvmhas.dll
27.01.2004 06:45 78.096 ORAUNLS10.DLL
27.01.2004 04:49 28.944 orauts.dll
27.01.2004 04:49 830 orauts.sym
08.03.2004 16:39 24.848 oravsn10.dll
03.02.2004 07:56 10.240 orawsec9.dll
03.02.2004 23:58 1.473.868 ORAXML10.DLL
30.09.1999 17:43 2.478 orclcontainer.bmp
30.09.1999 17:43 2.478 orclcontext.bmp
03.08.1999 19:00 246 orcldbserver.bmp
30.09.1999 18:10 3.310 orclnetservice.bmp
24.02.2004 13:11 57.344 OsUtils.dll
10.03.2004 19:17 60.280 sclsspawn.exe
21.11.2008 15:29 321 selecthome.bat
21.11.2008 15:28 266 selecthome.bat.oo4o
21.11.2008 15:29 55 selecthome.bat.oraoledb
27.10.2004 10:14 434.176 sqora32.dll
27.10.2004 10:16 65.536 sqoras32.dll
27.10.2004 10:16 32.768 sqresus.dll
21.11.2008 15:28 3.433 targetdeploy.pl
05.03.2004 19:17 37.084 TNSPING.EXE
21.11.2008 15:28 260 trcasst.bat
30.11.1999 12:32 145.408 unzip.exe
16.07.1998 18:36 104.448 zip.exe
112 File(s) 25.228.632 bytes
2 Dir(s) 8.552.009.728 bytes free

You have oracle 10g and python 2.6. Are you sure you installed the cx_Oracle version that is compatible with those particular Python and Oracle's versions? (It comes in several flavours so you need to be sure you installed the right one).

Netsnmpj.dll: The specified procedure could not be found

Hi guys,
I am developing with netsnmpj. I have downloaded the netsnmpj tookit from http://sourceforge.net/projects/netsnmpj/files/.
When I use the example of the netsnmpj in Eclipse, it can be compiled successfully. But when I run it, the following errors appeared.
I have added the netsnmpj.dll to the jdk location, but why it shows "The specified procedure could not be found"?
I have spent one day on this issue.
Need your help and many thanks.
java.lang.UnsatisfiedLinkError: C:\Program Files\Java\jdk1.6.0_17\jre\lib\System\netsnmpj.dll: The specified procedure could not be found
## Could not find the netsnmpj library.
## Please check your java.library.path setting.
## Currently java.library.path is set to:
## C:\Program Files\Java\jdk1.6.0_17\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Rational\Rose RealTime\bin\win32;c:\Program Files\Rational\common;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Java\jdk1.6.0_17\bin;C:\Program Files\Java\jdk1.6.0_17\jre\bin;C:\Python;C:\Ant1.7.1\bin;C:\usr\bin;C:\Program Files\Java\jdk1.6.0_17\jre\lib\System
##

It says it can't find the library. Best to believe it.
Write a stand alone app that does nothing but loads the dll. Verify that no other dependencies exist by printing the stack trace.
I have added the netsnmpj.dll to the jdk locationProbably a bad idea.

IIS Plug for WLS 6.1 SP2: The specified procedure could not be found.

I get an the following error message "The specified procedure could not be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1 sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming

Thank you for posting your answer, and then solution! :> I was fighting
with my IIS/WLS installation last night when I was about to give up, I came
across your posting. Although I'm playing with 7, I thought I would try
reading your posting anyways, and thankfully I did. What I saw, reminded me
to look at the steps one more time and I found I wasn't forwarding the
.wlforward piece on! So thank you veyr much! :>>>>
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
Fixed it.
I had mapped .wlforward to iisforward.dll instead of iisproxy.dll
/Jonas
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
I get an the following error message "The specified procedure could not
be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming

DB XML Java 'The specified procedure could not be found'

Hi guys, I'm new to DBXML, and I ran into this trouble both when trying out the examples and with a NetBeans project of my own.
I am using windows and I installed using "Berkeley DB XML 2.4.16.msi Windows installer (26M)" to the default path 'C:\Program Files\Oracle\Berkeley DB XML 2.4.16'. The the error is as follows:
// WHEN LOOKING AT THE EXAMPLE
C:\Program Files\Oracle\Berkeley DB XML 2.4.16\dbxml\examples\java\gettingStarted>java dbxml.gettingStarted.exampleLoadContainer -h dbEnv -p ../../xmlDataException in thread "main" java.lang.UnsatisfiedLinkError: C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin\libdbxml_java24.dll: The specified procedure could not be found
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.sleepycat.dbxml.dbxml_javaJNI.<clinit>(dbxml_javaJNI.java:35)
at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:56)
at dbxml.gettingStarted.exampleLoadContainer.loadXmlFiles(exampleLoadContainer.java:160)
at dbxml.gettingStarted.exampleLoadContainer.main(exampleLoadContainer.java:81)
// IN MY OWN NETBEANS PROJECT
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin\libdbxml_java24.dll: The specified procedure could not be found
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1703)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1028)
at com.sleepycat.dbxml.dbxml_javaJNI.<clinit>(dbxml_javaJNI.java:35)
at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:96)
at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:102)
at sample.MainForm.btnGoMouseClicked(MainForm.java:58)
at sample.MainForm.access$000(MainForm.java:11)
at sample.MainForm$1.mouseClicked(MainForm.java:30)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6266)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2475)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
I am pretty sure that the path and classpaths are set up properly:
(user properties)
CLASSPATH = C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\dbxmlexamples.jar;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\dbxml.jar;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\db.jar
PATH = C:\Program Files\Delta3D_REL-2.3.0\build_VS2008\bin;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin
For good measure I also tried moving these into the 'system variables' section of the environment variables, and also tried adding -Djava.library.path="C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin"
FYI, removing the dbxml path variable changes the error message to Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no libdb_java46 in java.library.path
Any thoughts? I'm looking at using DBXML for my honours thesis, so it's pretty important to me to get this working, any help would be greatly appreciated.

CaptainPants wrote:
C:\Program Files\Oracle\Berkeley DB XML 2.4.16\dbxml\examples\java\gettingStarted>java dbxml.gettingStarted.exampleLoadContainer -h dbEnv -p ../../xmlDataException in thread "main" java.lang.UnsatisfiedLinkError: C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin\libdbxml_java24.dll: The specified procedure could not be found
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
I am pretty sure that the path and classpaths are set up properly:
(user properties)
CLASSPATH = C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\dbxmlexamples.jar;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\dbxml.jar;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\jar\db.jar
PATH = C:\Program Files\Delta3D_REL-2.3.0\build_VS2008\bin;C:\Program Files\Oracle\Berkeley DB XML 2.4.16\binThis reduces the PATH to just those two directories. Not very good. What about C:\WINDOWS\system32 and others? Instead, use:
set Path=%Path%;C:\My\Extra\Path
For good measure I also tried moving these into the 'system variables' section of the environment variables, and also tried adding -Djava.library.path="C:\Program Files\Oracle\Berkeley DB XML 2.4.16\bin"
FYI, removing the dbxml path variable changes the error message to Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no libdb_java46 in java.library.pathThe directory has to be in the PATH as well, because the DBXML libraries is linked to Xerces and XQilla and needs to be able to load these. Set the PATH globally (for all users), and restart the machine. Then it'll also work for the Local System Account in case you're using that.
Michael Ludwig

JNI: The specified procedure could not be found.

Hi All,
I think everyone who has ever worked with JNI has seen this error at some point "UnsatisfiedLinkError The specified procedure could not be found."
I have a problem where I have an existing JNI library ( C++/Windows) that has worked for some time. I recently upgraded the compiler and rebuilt the JNI library. Now I get the above error. The environment has not changed, except for the newly built .dll and maybe some other .dlls that it depends on. The .dll is being found because I debugged from where the Java class calls System.loadLibrary() and the path to the .dll is resolved correctly. The problem comes when the ClassLoader actually tries to load it. I don't understand what "specified procedure" it means. No procedure is even being called. The problem happens when the library is being loaded not when I try to call a native method in the library. I cannot debug any further because I get to the native call that actually does the load and of course I cannot do any more. Is there any way to get more information so that I can figure out what the problem is or maybe someone has had a similar issue and can provide some hints?
many many thanks!
B

Did you perhaps change one of the java classes by putting it in a different package? That changes the required native method signature.
With regard to the C/C++: OK - what I mentioned was - in your case - apparently not the problem. But lots of folks have had problems with this. The reason is that frequently compilers trigger on surprising things - for example the fact that the source code is in .cpp files instead of .c files. (I've seen reports that users changing compilers have stumbled into thgis problem.) The point is that compilers generate a different style of code for C vs C++. (Perhaps strictly speaking it isn't code - it is annotations used by a linker to match up callers with called subroutines.) The JNI interface is a C interface, not a C++ interface, and that's why the wrong code generation can give grief.

Java.io.IOException: The specified procedure could not be found

I get this error in this code.
private boolean updateCICServer(){
boolean updatestatus=true;
long fsize=0;
int arraysize=0;
byte temp[];
try{
if(f.length()>this.m_iCICDataSize){
if(DEBUG) System.err.println("update file");
fsize = f.length();
arraysize = (int)f.length()-this.m_iCICDataSize;
temp = new byte[arraysize];
if (this.fs.read(temp,0,arraysize)!=-1){
//THIS READ () Throws "java.io.IOException: The specified procedure could not be found"
fs is a fileinput stream and it is open.
addByte(temp);
} else{
updatestatus=false;
}catch(Exception e){
updatestatus=false;
System.err.println(fsize);
System.err.println(arraysize);
System.err.println(this.m_iCICDataSize);
System.err.println(e.toString());
return(updatestatus);
Any suggestions?

Never mind I found it.
It was a programmer (Me) IQ error.
I did close the fs in another place in the program and for got about it.
Still it is a strange error message.
Well now I know.

Error: A user with the specified SID could not be found in the domain.

Hi All,
I am getting a error as below,
A user with the specified SID could not be found in the domain.
Check the spelling of the account name 'domain\usersAMAccountName' and try again.
-    at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName, SID_NAME_USE[] IntendedAccountType, SID_NAME_USE& sidUse)
   at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName)
   at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(UserProfileApplicationProxy proxy, Guid partitionID, String strAccountName, Boolean isWindowsAccount)
   at Microsoft.Office.Server.UserProfiles.UserProfile.set_SID()
   at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAccountName, String strPreferredName)
   at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName, String strPreferredName)
   at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName)
Any help?
Thanks,
Mohakk

Hi,
Per my understanding, the code should be OK, I have two suggestions as below:
1. Please ensure that the account of that user is valid in your production environment;
2. Try other accounts in the CreateUserProfile() funciton to see if it can work.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

M. Lion error: A server with the specified hostname could not be found

Hi,
I haven't been able to update apps since upgrading to Mountain Lion 10.8.1. Keep getting the error in the subject of this post.
Not even able to install the upgrade to 10.8.2 . Don't even see the option in the App Store and when I download the upgrade manually fom the Apple Support site, the installation fails saying that it can not be installed on my hard drive because I need have 10.8.2 installed !!
I saw a discussion for a similar error that recommends checking and fixing the Hosts file. I think there's an error on mine but it would not let me save it after i make a change. I've pasted the contents of my host file below to make sure that there's in fact an error on it (on the last line - looks like an IPv6 address even tough I don't use this type of address).
Thanks in advance for any help you could proovide
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1               localhost
255.255.255.255          broadcasthost
::1                           localhost
fe80::1%lo0          localhost

Hi Chris,
great news. I could not find any of the files you listed except for this one:
"/Library/Preferences/com.apple.SoftwareUpdate.plist"
After I renamed this one, my updates started working.
Thanks much for the great suggestions
Oscar

Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
I have upgraded the XP OS to SP3 with numerous updates;
Checked that the USB ports read Data sticks OK;
run a/v and malware programs, including Microsoft Safety Scanner;
checked that USB drivers are up to date;
uninstalled driver software and re-installed with software downloaded from HP;
carried out the procedures detailed in HP Support Forum 4022116
Error message the same.
This is for my elderly neighbour - help please!
This question was solved.
View Solution.

Hi @bodger50,
Welcome to the HP Forums!
I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
Hope this is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error messages: "itunesobjspl/jenetsvc.dll The specified module could not be found." And Error -2032 "Quicktime failed to initialize."

I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running

ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init();

Windows Patching - Error when logging in - "The Specified procedure could not be found"

Similar Messages

Maybe you are looking for