Windows PC iCloud doesn't show as a device in photostream; also doesn't want to update since Aug 7

Windows 8.1 PC w/iCloud 4.0 for PC installed does not want to show as an installed device when I check the online iCloud sight. Is it supposed to show as an installed device under the iCloud?
Also, the photostream has not updated itself since August 7.

http://support.apple.com/kb/TS1538

Similar Messages

  • HT201317 My 4s and my ipad3 are both connected to wifi and icloud is turned on. The photos on the 4s do not upload to the ipad3. I have turned icloud off and on on both devices. It also does not upload to my PC. What is the problem?

    My 4s and my ipad3 are both connected to wifi and icloud is turned on. The photos on the 4s do not upload to the ipad3. I have turned icloud off and on on both devices. It also does not upload to my PC. What is the problem?

    Welcome to the Apple Community.
    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • TS3694 My 3gs doesn't want to update what do i do?

    My 3gs doesn't want to update what do i do?

    Can you provide more information?  What are you trying to update..Apps? To a higher version of iOS? What happens when you try to update whatever it is you are trying to update?

  • Windows 8 installer doesn't want to format the boot camp partition

    Hello,
    I followed this instructions : http://www.pocket-lint.com/news/45898/how-to-install-windows-8-on-a-mac
    All works but the installer doesn't want to format the boot camp partition, i click on "option" > "format", i wait like 3-4 seconds (so not enought to format 100Go) and then same error "Windows can't be installed on this partition".
    Any idea ?
    I have :
    Macbook Pro 15'' 2,4 GHz Intel Core i5
    Mac OS X v10.7.5
    1 Drive : 320Go
    1 USB KEY that i used to install osx lion, so i think it's not the problem.
    1 Windows8 64 downloaded from my university, and it works on a PC.

    I have the same issue. Dec. 2013 13" macbook pro with 1tb ssd. Windows 8 Pro (have the box/cd).
    Why is it that I can find every computer problem I ever have in a thread somewhere where someone else had the same problem too....but the threads never have solutions.  There should be a name for this phenomenon.

  • Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

     Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
     After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
      I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
     I had already restore the system.
     So, I use my laptop to work, and it has only 4 days of use.
     I need help! Thanks!

    Hi,
    Run through the following procedure.
    Boot the computer normally and log-in.
    At the black screen, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( including spaces ) and hit enter.
    Dism /Online /Cleanup-Image /RestoreHealth
    This will take a while to complete, but when it’s finished, restart the notebook.
    If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( there's a space between sfc and the / ) and hit enter.
    Sfc /scannow
    When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
    Restart the notebook again.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I tried deleting a bunch of songs from iTunes after downloading the newest version. After deleting them they're 'hidden' on iCloud and still show up on my phone which I do not want these at all the begin. So how do I delete these songs?

    I have read a little and something about iTunes Match... I'm not about to spend $24.99 just to delete some songs off of the cloud.

    Go to Settings > Music and make sure "Show All Music" is off.  Then only actually downloaded music will be displayed.  With it on, you can see all your music stored in the Cloud as well.  That music will always be in the Cloud (until such time as you download it) but it isn't present on your device.

  • F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

    Hi,
    I am a little confused. Today I installed windows 7 64-bit on my acer 9423wsmi notebook. I installed my hp f4280 via a usb cable. It prints and scans. Now I try to install my wireless kit (came with the printer) which worked fine an vista 32-bit sp1. I looked up every driver etc. on hp.com and found the install guide for windows 7. Everything went as described and printing works even without the pc adapter. You might say what is the problem. Well I noticed the wireless (copy) isn't listed under "devices and printers". I found this a bit strange. I tried to install a printer via the windows wizard. But using the network option gives me the shared copy. And using a the usb02 virtual port to which the printer is connect yields the same result: a fully working printer but nowhere to be found in "devices and printers". I searched the internet for a solution but my search results get cluttered with support for the installation. 
    My questions:
    Is this normal on this system with these settings?
    Is there a way to let the printer appear in "devices and printers"? 
    Kind Regards 
    Carnelain

    Hi Flash,
    I still haven't fixed the problem. I assume you found this installation guide. If I follow this I still can't see the printer in "device and printers". But when I open a document (notepad, word) I can see the printer listed in the printer dialog. So I am able to print. Printer properties are a bit hard to reach but it works. I am still hoping some wizz kid from hp to come up with a solution . Keep me posted if you know something more.
    Carnelain

  • My iCloud doesn't want to sign in?

    I have the correct information but it just keeps loading and loading and loading for ages! And it still won't sign me in. How do I get it to work?

    Clean the lint/debris from the charging port and plug the cable in.

  • Kde doesn't want to start since last update

    yesterday I updated kde to the latest version 3.1.5-1
    But when my system boots (and it normally automatically logs me into a kde session) it sais something about an internal communication error, and that I should start dcopserver or something. After that it shows me the first time wizard, and when you complete this, it sais it doesn't have write access to my home directory. Then it hangs on the kde load screen, so you can't start it anymore. I'm using fluxbox to write this, and my home dir is perfectly mounted/writable btw.
    Ideas?

    the second I posted that, my system froze
    ctrl-alt-backspace or the sysrq stuff didn't work, only a hard reboot saved me
    there must definatelly be something wrong with that new kde package

  • Slider doesn't want to update

    I've connected a local variable to a slider indicator. Now I want to change this local variable, so that the indicator shows the new value. When I start the VI, the indicator sometimes works and sometimes not.
    I've got the idea, that the slider mostly doesn't work, when I call the VI with the slider the second time during the execution of a programm. But I can't say for sure...
    When I change the slider to a "normal" indicator (that shows only numbers but no bars) everything works fine. How can I use the slide bar indicator???
    Philipp

    I'm not quite sure exactly what kind of behavior you are referring to. I tried to test this, but my VI seemed to work fine. I am attaching what I built. Run this on your machine and see if you experience the same behavior you see with your VI.
    J.R. Allen
    Attachments:
    Slide_Test.vi ‏13 KB

  • HT4623 Im having problems with my music ever since I got the ITunes Match, now I'm not able to listen to some songs and my ipod doesn't want to update the iOS saying something about my network and I'm hooked up to the internet?

    I was just have difficults in different things on my ipod touch 4th gene now that I have ITune Match and it not being able to update the iOS 6.1.5 and as to not sure of what I can do to get it to update and get all my songs back. Because right now I have at least 20 or 30 songs that I cant play now and I'm not sure why. I'm not even able to click on the songs and I wanted to see if there was a way to fix this without restore my ipod and starting over.

    Maybe this:
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Earlybird doesn't want to update

    I've been using Earlybird on my Win 7 64-bit laptop for about 18 months. I use EB because Thunderbird crashed every time I tried to open it; EB gets unresponsive every now and again but is otherwise stable. My research at the time indicated that EB was the only 64-bit alternative.
    For the last couple of weeks I've been getting intermittent messages that auto updates have failed - along with a link which just leads back to the latest version of Thunderbird. On checking my installation I seem to be on EB 10.0, although the current version seems to be 38. Apparently mine has never updated.
    I don't seem to have the original installation file for EB 10.0 so I'm nervous about experimenting in case I replace something that's working with something that doesn't. Should I leave well alone with EB 10.0, or try to manually update - presumably by installing the latest version of EB over the top of the existing version? Or can I try to run the latest version of Thunderbird alongside my existing Earlybird?

    Earlybird corresponds to an alpha release and is strictly intended for testing purposes only. It is by no means recommended for production use.
    This is what I'd do:
    First create a full backup of your profile.
    http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring
    Then uninstall Earlybird.
    Download the current release version from
    https://www.mozilla.org/en-US/thunderbird/
    Install the release version.
    Report back if you still having problems.
    In case you want to stick with Earlybird you can download the latest version here:
    https://www.mozilla.org/en-US/thunderbird/channel
    If you know what you're doing you can also install the release version alongside with Earlybird. In that case make sure to create a separate profile for the release version and make sure not to mix-up profiles.
    If that sounds too complicated, better forget about it.

  • What do I do if my iPod doesn't want to update?

    It says that it "cannot be updated because it contains files that are in use by another application". Help!

    Restart your computer! 

  • HT5957 iOS 7.0.2 doesn't want to update on my iPad any help or advice? It's about to download and then it stops and says it has failed

    Help???

    Check for Updates
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%204/efb102da8fffcf27697 5577e062c9a9e.jpg

  • Firefox doesn't want to update

    Hello,
    I'm currently running Firefox 8.0. When I go to "About Firefox", Firefox checks for updates and then displays "Firefox is up to date" even though the current release is 9.0.1.
    How do I get it to update? I know I can download the installer myself but I'd like to know why Firefox isn't doing it by itself.
    For your information, Thunderbird updated successfully to 9.0.1. And Firefox is set up to automatically check for updates.
    Thanks!

    Okay, nevermind. I tried for maybe the 10th time and it worked.
    I guess the update takes quite a while to be available or maybe the whole process is a little capricious...
    Too bad I can't find a way to delete my whole post...

Maybe you are looking for