Windows PC running Vista can't connect to internet via Time Capsule

My Macbook works beautifully with my TC, however I cannot get my Windows PC (running Vista) to connect to the internet via the TC. My PC shows it's connected to the TC, however when I launch the web browser it shows the cannot connect page. Has anyone else experienced this problem and if so I welcome your feedback.

I have the same problem. Did you work it out? If yes, what did you do?
Ta

Similar Messages

  • Vista laptop can't connect to Internet via Time Capsule

    I just setup my brand new 1TB Time Capsule and everything works perfectly with my iMac. Backups work and I can connect to the Internet fine. I'm using the TC as my network router, so everything will connect through the TC. My one-year old Compaq Vista laptop can connect to the Internet if the wireless security is turned off, but once I turn it on..no Internet for the laptop. It can connect and see the network, but can't get to the Internet. I've reset the TC several times trying various setting combinations and I've went through the laptop and tried to update Windows and any drivers that I thought might help, but nothing.
    I have the following Wireless settings on the TIme Capsule:
    - radio mode set to Auto
    - radio channel selection set to Auto
    - wireless security set to WPA/WPA2 Personal
    Am I missing something? I can't figure if this is a settings issue, laptop issue, or a Time Capsule issue. Any help would be greatly appreciated.

    Windows Vista and Windows 7 cannot see Time Capsule drive
    *Thread from:*
    *http://techsupport.foreverwarm.com/time-capsule-windows*
    This might be your security settings. Open the Local Security Policy utility:
    %windir%\system32\secpol.msc /s
    Navigate to Local Policies folder, Security Options view. Find “Network security: LAN Manager authentication level”. If it is set to “Send NTLMv2 response only” change it to “Send LM & NTLM – use NTLMv2 session security if negotiated”.
    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable.

  • I can't connect to internet using Time Capsule router.

    My hard drive recently died. I took the iMac to the Apple store and had a 500 GB hard drive installed. I disconnected my Time Capsule so the Apple rep could restore my data. Now when I try to reconnect to the internet via Time Capsule router, it won't connect. The cable modem is fine, and the Time Capsule's status seems OK with the green light. It even seems to be backing up OK. I don't think I did anything differently, other than unplug it in order to have the Apple rep restore my data. Any thoughts out there?

    It sounds like the cable company neglected to mention to you that you must completely reset the modem whenever you change the device that it is connected to. That's because the modem "associates" with a device and "remembers" the settings.
    If you then change devices, the modem will "look" for the old device that was connected to it and it will of course not "find" it, so it won't connect.
    That's why you need to do the complete sequence that I provided.
    If you still cannot connect after the complete reset, then you may have a defective modem. I'm not trying to pick on the cable company....and yours may be an exception...but the last time my modem was having problems, the provider kept insisting that "everything looks good". But, they always say that.
    I turned the modem off and called them back an hour later and they still said "everything looks good".
    An Ethernet cable has a slightly wider plug than a phone cable. If that's the only connector on the modem, then it must be the right one. Ethernet cables do fail. You might want to check your cable, just in case.

  • DirecTV DVR HR20 connect to internet via Time Capsule

    Hi Everyone,
    I've searched and come across various topics about connecting the DirecTV DVR to the internet via Time Capsule, but none of them seem to provide a solution for wireless connectivity. 
    Can anyone point me to a topic where it describes the steps and any issues related to getting my DirecTV DVR connected to the internet via the Time Capsule wirelessly.
    I have gone through the setup and I get connected to my network, but I get the error when it tries to connect to the internet.
    Do I have to do any port forwarding or anything special?
    I use to have my Netgear supporting this configuration, just purchased the Time Capsule and now I cannot get my DVR connected.
    Thanks for the support
    Jeff...

    The Direct TV DVR has an Ethernet connection on the back, which is strongly recommended if you intend to download movies or any kind of high definition material.
    If you are trying to use the new Whole Home feature, wireless is not supported by Direct TV for this service.
    If you are trying to connect to the DVR using wireless from the Time Capsule, you must be using some sort of wireless to Ethernet bridge device.
    What device are you trying to use?
    Have you verified that this device is compatible with the Time Capsule?
    As a test, connect the adapter/bridge to your laptop and turn the wireless off on the laptop. Open your browser to see if you can get an Internet connection.
    If you can, you know the network connection is good and the focus shifts to the DVR as the source of the problem.
    If you can't, we'll need to figure out if the adapter you are using will work the Time Capsule.

  • Windows XP won't connect to Internet via Time Capsule AE

    I've got a MacBook Pro and MacBook using Airport Extreme via Time Capsule. I recently partitioned MacBook Pro and added Windows XP via Boot Camp. The XP sees the Airport but cannot connect. I've added the same key to XP as used for Mac access, but it still doesn't connect.
    Its a WPA2 Personal Key. XP allows WEP, WPA, and WPA-??? (there are three other letters there that are NOT "2" or "Personal"). It allows one of two "types" that are TKIP or AS? (Three letters that I can't remember.) I'm completely lost.
    I also tried changing channels, but that's frustrating unless I just change from the PC end. I had been changing them on the Mac, then rebooting to XP to see what happens. (Nothing, so far.)
    Has anyone successfully gotten XP on the Wireless?

    XP wireless to a Time Capsule works fine. Problem is, as you've found, choosing the right wireless security, then entering the key in the right format.
    Because of this problem in mixed OS X / XP networks, I've stuck with WEP. It's less secure, but it works!
    I live in a rural area, so wireless security isn't really an issue.
    Try reconfiguring your TC to use WEP. Once you've got it working, investigate the other security options.

  • Computers connecting to internet via time capsule are reporting no internet connectivity.  PC is reporting default gateway has changed.  How to I correct this?

    Am having trouble with maintaining a stable wireless network via the Time Capsule.  Am running 1 Mac and 3 PC on a Time Capsule wireless in bridge mode connected to a Verizon wireless router.  Verizon wireless is turned off and the Time Capsule seems to be staying connected to the Verizon router.  When any of the connected computerss goes to stanby, they often report the internet is no longer available.  The PCs say the default gateway has changed ans the Mac simply reports the network parameters have changed.  What do I need to do to the Time Capsule to stabilize the wireless network?

    It is unlikely that the gateway changes.. but anything is possible.. sorry I am not in the US.. is your service adsl or cable?? What sort of lease time does the public IP have? Some cable companies now rotate then on the hour I noticed.. others on about 3months.. but most it is one day.
    Track it yourself.. see what gateway address the TC gets and if it is rotating with the IP.
    If your client computers are running Mountain Lion.. the plain fact is, they are not particularly stable.
    Wireless is worst.. ethernet tends to be ok.. but for instance Laptops updated to Mountain Lion can be pretty flakey.. with the TC.. and it is the combo that is more the issue. People report improvement with clean install of ML. BUT there is still a bug there that causes the ML to be less than fantastic.
    I experience it occasionally even with a dlink wireless router.. after a wake from sleep.. the network will drop out and need to be manually connected back.. I have to admit I expect no better from Mountain Lion. I could load Snow Leopard on it and it would drop once every blue moon.. but I got the laptop with ML so I live with it.. !!

  • CAn't connect to Internet Through Time Capsule-Self Assigned IP Adress

    My iBook battery died. After connecting to power source, I can't connect to the internet. I get a message that the iBook is self assigning the IP address. How do I correct this? I've removed the battery & done several restarts with no success.

    Here's 10.4 directions, not to different from 10.5, see if it helps...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

  • Mac connects but PC won't connect to internet via TIme Capsule wireless net

    I have my personal Mac and work PC at home. I'm switching from a wireless network using my airport extreme base station to a new time capsule. Had no problems earlier, but now with my new wireless network I have the following problem:
    - Both Mac and PC are able to connect to my home wireless network created through Time Capsule
    - Only Mac can access the internet via the Time Capsule wireless network
    - PC connects fine to the wireless network, but the settings indicate the internet cannot be accessed
    I've tried fiddling with configurations etc. but cannot seem to get the PC to connect through to the internet using my Time Capsule.
    The PC will connect directly to the net if I plug in the ethernet from my cable modem....What's the problem? Any ideas?

    Welcome to the discussions forum AZR-DC.
    The PC will connect directly to the net if I plug in the ethernet from my cable modem...
    Make it a habit to power down your modem whenever you connect something different to it. Merely detaching the AEBS and attaching your Time Capsule or your computer directly will confuse most modems, so leave it powered down for a few moments. Power down your other equipment while you're at it.
    Then, power up all the equipment as follows:
    Modem... wait a few moments for it to complete its startup sequence.
    Time Capsule. Wait a few moments again.
    Computers.
    Be sure your PC and your Mac are getting their addresses "via DHCP".

  • My Housemate can't access wireless internet via Time Capsule...

    Happened all of a sudden after working fine. He's the only PC user in the house.
    He's asked me to do a reset on the wireless network.
    Any suggestions? Walkthrough?
    Thanks in advance!
    Time Capsule 2TB

    Just do a reboot of the TC.. ie pull out the power cord.. count to 10.. plug in the power cord.
    If that doesn't work.. try this.
    Same as what I just posted here.
    https://discussions.apple.com/thread/4780145?tstart=0
    Use SMB names.. important for windows..
    Fix the channels.. use different name for 5ghz.
    And WPA2 Personal security.

  • Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Do the usual wireless things.
    Change the wireless name to simple name with only alphanumerics and no spaces.
    Set to manual and use channels 1, 6, 11 in turn.
    For testing take off the security altogether.
    The iphone only works on 2.4ghz so only that band is relevant.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • Problem connecting Dell Inspiron 6000 to internet via Time Capsule.

    Hi,
    Unable to connect Dell Inspiron 6000 to internet via Time Capsule.
    I get this "Windows is unable to connect to selected network. Network may no longer be in range". Any clue?
    Thanks.

    What modem do you have?
    Is it a router? What mode is the TC being setup in, bridge or router?
    Is it cable modem? If so did you power cycle the modem for the required time.. it might be 30min or just 5min or many hours depending on the ISP.
    Tell us more.
    For mavericks please ensure your network connections have ipv6 set correctly.. ie link-local.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • I can't connect my WD to time capsule

    hello, i've a problem, my WD "my book for Mac" don't connect to time capsule usb port.
    When i try to connect to time capsule, airport app tell me the following: Must repair the disk.
    How i can connect my WD to time capsule??
    Best regards.
    Pedro Pino

    What TC model and firmware is it?
    WD mybook are generally ok.. but the unpowered type will have problems.. you need a powered hub.
    And some of the older TC will not handle all versions of some products.. WD keep changing them around.
    It is often hard to figure out what works and what doesn't.
    I am trying to assemble a database here.
    USB drive compatibility with Airport Routers. Help make database.

  • Nokia N8 Can't connect to internet via WIFI

    HI!
    I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot)  with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
    Solved!
    Go to Solution.

    alucard3 wrote:
    Resolved by unofficial but efficiently hotfix.
    http://www.n8fanclub.com/2012/12/wlan-connectivity​-software-update-for.html
    Hi am having the same problem but the link above does not work?
    Thanks
    ledders

Maybe you are looking for

  • Lost my itunes

    The other day I logged on my mac and i saw that my itunes icon had a question mark in it.  I went to log in and nothing. I quit the app and tried to open it but to my surprise it's gone. What happened? Half of my music left with it.

  • HELP!  I can't publish my Iweb to Mobile Me

    Hey Everyone! I am currently in Nigeria and the internet is sketchy at best. It is very slow but does have a continuous signal. I've tried five times to publish my iweb and I keep getting the signal that it couldn't connect to Mobile Me. This is afte

  • Problems ripping postscript files with cs4/no bleed?

    I have having a problem ripping high res files to postscript and distilling not showing the crop marks, bleeds or any printer marks. On the export these are checked properly. A normal pdf export from CS4 works fine, but when I rip to ps and distill t

  • What is command for graceful shutdown ?

              Question - I see in the WebLogic documentation that a Server           running in a cluster should be shutdown using the Admin SHUTDOWN           command - but I am unable to find any more information about this           command.          

  • Flash on mac os 10.3.9 flash player being prohibited by browser security settings how do i fix this

    this is the message i get "This content requires the Adobe Flash Player. It either has not been installed yet or is prohibited by your browser security settings. Either click here to get Flash or loosen your browser security restrictions." how do i l