Windows portion screen Resolution problem!

Hey, I played a game on Steam called Reddick Dark Athena which started as 800x600...I set it up to 1920x1080.
After leaving game I noticed it set my desktop resolution to 800x600 yet it shows in the screen resolution meny as 1920x1080...anything as 1920x1200 or less is half the screen size and exactly in middle of the screen only 2550x1440 will do full screen. Need help!

Hi david_vr,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • EHP1 Upgarde Monitor screen resolution problem in a support message

    Hi Experts,
    We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
    Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
    How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
    can any one suggest how to make the overview tab visible completely with small resolution monitors.
    Thanks
    Nanda

    >
    Nanda Kishore wrote:
    > Hi
    >
    > There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
    >
    > Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
    SAP Note 1351673      Size of containers not changed for support messages       
    Best regards,
    Ruediger

  • Screen resolution problem in table control

    when i was transfering data in BDC using table control,i got screen resolution problem.
    how to rectify the problem?

    Hi,
    Check this coding.
    WA_CTU_PARAMS type ctu_params.
    WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
    WA_CTU_PARAMS-UPDMODE = 'S'. "synchronous update
    WA_CTU_PARAMS-NOBINPT = 'X'.
    WA_CTU_PARAMS-NOBIEND = 'X'.
    WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
    CALL TRANSACTION 'VA01' USING it_bdcdata
    OPTIONS FROM WA_CTU_PARAMS
    MESSAGES INTO it_mesg.
    Default size will play good role in terms of resolution. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resolution. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • Screen Resolution Problem in Session Method

    Hi
    I want to use session method in BDC. How to resolve screen resolution problem in Session Method?
    Please give me the code or steps regarding this.
    Thanks & Regards
    venkateswararao

    Hi
    U can only run the session with the option Dynpro Standard Size setted.
    In this way the system should be use the same resolution for every situation.
    Max

  • To Resolve Screen Resolution Problem

    Hi
    How to resolve screen resolution problem in BDC Session Method. can't we use ctu_params?
    Thanx & Regards
    venkat

    Hi Venkat,
    Yes, you can use ctu_params.
    This is for Default screen size for CALL TRANSACTION. It signifies the screen size will be constant irrespective of the screen resolution(which can vary for different user). The importance of this lies in programs(module pool) that contain table controls. With default screen size we can control the no of rows in the table control which otherwise may vary depending on the screen resolution.
    DEFSIZE is the Selection as to whether the screens of the called transaction are displayed in the standard screen size. Values "X" (standard size), " " (current size).
    sample.
    data : x_ctu_params type ctu_params.
    To have default screen size, mode and update
      x_ctu_params-defsize = 'X'.
      x_ctu_params-dismode = 'X'.
      x_ctu_params-updmode = 'X'.
    call transaction tscode using  bdcdata
                              options from x_ctu_params
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

    Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
    screen showing. I Need to regain The right side of the scree
    I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

    Hi,
    When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
    Regarding screen resolution, we may follow the below two articles to change it:
    Change your screen resolution
    Getting the best display on your monitor
    Follow the steps below:
    1. Open Screen Resolution by clicking the Start button, clicking
    Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
    2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
    And if the monitor is LCD monitor, The monitor's  manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor.  Or we may check the monitor's manual to adjust.
    Best regards
    Michael Shao
    TechNet Community Support

  • Message says "screen resolution problem" and says to set higher than 1020 x 600. My screen resolution is set higher. Why am I getting this message all the time I use firefox?

    when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuously?

    I've had the problem too... for at least a month or more. It would happen when logging into yahoo mail. But it happens only with firefox... not explorer. I contacted yahoo and he had me first disable add ons... no change... and since it didn't happen with explorer, they said to contact firefox. So I followed the advice of cor-el's post (on this page) and made the text on my page smaller... It did fix the issue.... but, I liked the size of the text the way I had it. So, how do I get it back to that size, and not have that annoying message any longer? thanks!!

  • 3000/N100 Mouse/Screen Resolution Problems with Windows 7

    This is my first post and I appreciate your service.  My problem is that after I upgraded from Vista to Windows 7, I find that my touchpad mouse will freeze up & the screen resolution will changes occasionally when I boot up my computer.  When this happens, I have to restart my computer and hope that the mouse works and screen resolution is correct.  If it does work, it will continue to work until I turn off or restart the computer, then I cross my fingers again.  All my drivers are updated.  If the touchpad mouse is frozen, I can get my usb mouse to work, but I don't want to have to do that.  Has anyone else had this problem, or can anyone offer suggestions? 
    I never had this problem until I upgraded to Windows 7.
    Thanks in advance,
    Mike

    I am using the Win 7 Enterprise 32 bit trial version.
    It is the FULL version, NOT an upgrade.
    If you used Upgrade, that may be a clue?
    Synaptics touchpad Ver 6.2 (From Synaptics)
    File:   v14_0_3_C_XP32_Vista32_Win732...
    Graphics:  Intel VER. 8.15.10.1930
    From Windows update.
    You did not post your model number, so you may have Alps and Nvidia, who knows?

  • Screen resolution problem in Microsoft Test Manager by Testing Windows Store Apps

    Hi,
    we are trying to perform tests of Windows Store Apps in a remote device (tablet), so as it is explained in:
    http://msdn.microsoft.com/en-us/library/hh405417.aspx
    However, when we take a screenshot or we record a video, it is only shown a little part of the screen, because PC and Tablet screen resolutions are different.
    How could we solve this problem? Any idea?
    Thanks.

    Hi david_vr,
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Screen resolution problem - HP computer and LED Cinema Display

    I just purchased an HP Envy Phoenix H9-1330 with Windows 8, and I connected it to my 27" Mac LED Cinema Display, but the resolution is horrible. The highest option in the screen resolution menu is 1280 x 720, and I'm getting the error message "Your resolution is lower than 1024 x 768. Some items might not fit and apps might not open". How do I fix this? What kind of issue is this (Windows 8? Graphics card? HP can't support my monitor? etc...)?
    I just bought another brand new computer, but not an HP, with Windows 8 and I have no problems with the resolution - it looks absolutely beautiful. I want to use my monitor with my HP desktop though.
    Thanks for any help

    Still haven't figured it out....
    BUT I did notice that, on the back of the computer, there are 2 additional DVI connections that are covered with a black cover and screwed in (and they say 'please do not remove'.... I'm asuming it's because they aren't connected to anything? Or maybe they aren't connected to the graphics card?). Is it possible that just my DVI connection is wrong, and I'll need to connect to one of these covered-up DVI inputs instead? But why are they covered up? Do I need to take it in so they can be connected to the graphics card?? Help! I don't want to return this computer, but I will have to if I can't get the resolution fixed.

  • Screen Resolution problem in BDC

    Hi,
    I am writing a BDC for credit memo creation using FB65 transaction in 4.6b version.
    I am facing BDC problems because of screen resolution. Is there a way to determine the number of lines items that may show up in the table control based on the resolution.
    There is no position button available in 4.6b . also page down is not working.
    Could anyone suggest an alternative?

    Hi,
    Use the below syntax...
    CALL TRANSACTION tcode... OPTIONS FROM opt
    ... OPTIONS FROM opt
    Effect
    Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
    DISMODE
    Display mode (like the MODE addition)
    UPDMODE
    Update mode (like the UPDATE addition)
    CATTMODE
    CATT mode (controls a CATT)
    CATT mode can have the following values:
    ' ' No CATT active
    'N' CATT without single-screen control
    'A' CATT with single-screen control
    DEFSIZE
    Use default window size
    RACOMMIT
    Do not end transaction at COMMIT WORK
    NOBINPT
    No batch input mode (that is, SY-BINPT = SPACE)
    NOBIEND
    No batch input mode after the end of BDC data.
    The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
    'X' Yes
    ' ' No
    If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
    DISMODE
    From addition MODE
    UPDMODE
    From addition UPDATE
    CATTMODE
    No CATT active
    DEFSIZE
    Do not use default window size
    RACOMMIT
    Successful end on COMMIT WORK
    NOBINPT
    Batch input mode active ( SY-BINPT = X
    NOBIEND
    Batch input mode remains active after the BDC data

  • Screen Resolution Problem in Forms 6i at runtime

    Hi,
    I have developed my application in Forms 6i in Windows Screen resolution 800 X 600, it run ok in this resolution but when I changed the resolution of screen the application is not display on full screen.
    So tell me the solution of this problem.
    Shahzad

    Shahzad,
    Do NOT try to expand your form to fill the entire screen. In a windowing environment, most users sometimes need to see corners and peices of their other running applications. If yours expands to cover everything, it will not be appreciated.

  • NB200-10G Screen resolution problem

    Hi,
    My new NB200 does not display the toolbar when booted. It is there, I think, because if I click wildly below the visible screen there is sometimes a reaction. This seems like a screen resolution issue. When the system boots, the windows theme is distorted, as if the resolution was for a bigger screen. I have tried every combination of screen resolution but it doesn't solve it.
    Please help; this is totally destroying my pleasure at owning this new machine!
    Many thanks
    Satis

    Hi,
    I have a new NB200 and exactly the same thing has occurred: The NB200 booted up correctly (POST test BIOS screen OK), but when the display switched to Windows, the login dialog box was shifted down: From there on in, the task bar was not visible (but worked when pressing the windows hot key) and the desktop items were re-sorted. The Auto hide taskbar feature is disabled.
    Rebooting the PC (Power down & restart) fixes the display problem about 50% of the time.
    Did anyone resolve this issue?
    Thanks - Richard.

  • Screen Resolution Problem (Max. Resolution of only 1024x768)

    Hello,
    I just upgraded my T61 laptop from Windows XP to Windows 7, Everything was fine at first. But one day when I turned on my laptop, I found out that the screen resolution was wrong. It was only 1024x768 (not wide screen). As a result, the screen was on the left, leaving a thick black bar on the right. The given resolutions which I could choose are only 800x600 and 1024x768, no wide screen options. Tried nvidia control panel, it was still the same. Tried to connect to an external monitor (16:9 wide screen), the resolution was, however, perfect (fit the external monitor).
    I already have the newest display driver (nvidia Quadro NVS 140m - downloaded from Lenovo). I even reinstalled the driver and installed the monitor driver provided by Lenovo, but the problem still exists.
    By the way, after I encountered this problem, when I turn on the laptop, there is no more screen showing the ThinkVantage and the Intel logo. There is also no screen for "Starting Windows". It will straight away enter windows logon screen. It means, I have no way to enter BIOS or the recovery tools by pressing the ThinkVantage button at startup. (I cannot see anything!)
    Anyone can please help me?
    Thanks!

    ahboy0207, welcome to the forum,
    you need to install the monitot inf file from here. Scroll down the page for installation instructions.
    As you have installed another OS on your system you will have changed the Master Boot Record, (MBR), which contains the information allowing the ThinkVantage button to work at boot. If you left the recovery partition intact, i.e. didn't format it, it may be possible to repair the MBR in order that you can access it. However, the recovery partition will have the original XP image on it and not your W7.
    You can enter BIOS by pressing F1 at boot.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Screen resolution problem after i-tunes installed on XP pro

    Just purchased 5th Generation 60Gb for my daughters 16th Birthday which starts in about 14 minutes! Loaded the software on her XPpro service pack 2 laptop. When itunes executed the screen resolution drops to 8 bit! It can be changed in control panel and all works fine. but each time re boot itunes and the problem returns!
    Loaded on my desktop and everything fine also. tried the ms config stuff as per site and immediate problem when ms software disabled. Would seem to be a software conflict and compatability problem. The laptop is a fujitsu which is 2 years old. the older version of i-tunes which she downloaded about a year ago worked ok. Sadly we uninstalled it before installing the new version from the disc. Tried update from the site but it indicates the DC version is the latest.
    Interesting to read some of the problems that flks have had with the ipods. This one seems OK but does have a 'do not disconnect logo which hangs up and doesn't go away. However, if I do disconnect the computer 'burps' at me then all is well and forgotten!
    Oh yes. how do you delete unwanted songs once uploaded? Is there a simple 'delete' button?
    Any thoughts anyone as I've now spent all evening on it and it's her birthday in the morning (8th June)
    thanks in anticipation
    Gwynne (minolta man)

    sorted problem by changing computer! probably softward hardware conflict with iTunes

Maybe you are looking for