Windows Printing...now it does not work

So I have 3 mac laptops that I have been using that prints through a windows XP machine to a HP LaserJet 4100. I recently changed the wireless router and now non of them can print. They get the "Connection failed with error: NTSTATUSUNSUCCESSFUL" I tried to again add the printer but now it is not showing up on the printer list under workgroup. It is at least seeing the network since this is the only windows machine on the network for it to see 'workgroup.' I had a similar probelm a few months back but this turned out to be solved by entering a user name & password on the XP machine since I did not have one before.
As I said I recently changed my wireless router. All machines have access to the network and are working fine with the exception to this one probelm. I have looked for over an hour at these boards and have yet to find an anwser.

Ok...so I have solved my problem. The new router was blocking port 631. I forward this port to the desktop ip address and all is well in windows printing land.

Similar Messages

  • I HAVE EARLIER PREPARED WINDOWS REPAIR DISC, NOW IT DOES NOT WORK

    140525
    I HAVE WINDOWS 7  ULTIMATE VERSION- 32 BIT
    I HAVE EARLIER PREPARED MANY  " WINDOWS REPAIR DISC" FROM TIME TO TIME AS A PROTECTION ON THIS VERY LAPTOP AND OS.
    NOW IT DOES NOT WORK AND GIVE ERROR CODE -- 0XC00AA0301.
    I TRIED SEVERAL TIMES AND WASTED QUITE A FEW DVD'S.
    CAN YOU GUIDE?
    REPLY ON [email protected]
    HOPE TO RECEIVE HELP.
    GJDMBH

    Once downloaded the Window7 setup you then want to download the windows free burning app from the same thread.
    Also visit the Microsoft website link below as has basic guidance that may help you.
    http://www.microsoftstore.com/store/msusa/html/pbP​age.Help_Win7_usbdvd_dwnTool
    Basically with the Windows free burning app you can make either a USB boot stick media of windows 7 or a good older fashioned DVD boot media. Just follow instructions & see how you go, if get stuck come back to this thread & post details on your issue - hopefully myself or other members will be able assist you further if needed.
    Like my post? Click Kudos (thumb+) to show appreciation.

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

          
    I originally posted this question here:
    answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
    and was asked to post it on this forum...
    I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
    it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
    up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power.  I have finally gone back the previous version 9926, which has its issues but no where near as bad
    as not having any network connectivity!  Does anyone have this issue and a workaround? 
    Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

    Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
    this... Thanks!
    I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
    (but I suspect not just the only culprit) in this above mentioned problem...
    10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
    is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
    laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
    or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
    I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop. 
    Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
    Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
    that has happened with the Cisco software install attempts under 10041.
    Another note: CISCO Anyconnect also has the issue.

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

  • In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • Photoshop CS5 Print Settings button does not work

    Photoshop CS5 (updated to newest version 12.0.4) Print Settings button does nothing regardless of printer requested.  Does not work with either an HP1102w or a Cannon Pro9000 Mark II.  I have deleted printers and reinstalled but it still doesn't work.  Using a Mac Mini with OS 10.7.5
    Message was edited by: HCASED

    Received this from Black Magic:
    From: Albert Chu [[email protected]]
    Sent: Friday, April 03, 2009 7:11 PM
    Subject: Re: For Albert: ISSUE: Playback Settings button in BlackMagic (Intensity Pro) project not working
    Importance: High
    Hello Joe,
    Funny enough, I was just about to run this test and happened to check with another tech about this.  Apparently another customer had gotten in touch with us regarding the same issue and after confirming this, found that it is a bug.  As such, this has been logged and we should hopefully see a fix for it in our future updates.
    Please continue to check our software downloads page for this update (we do an update roughly every 6 to 8 weeks).  Thanks for your patience.
    Regards,
    Albert Chu
    Support Engineer
    Blackmagic Design Inc.
    www.blackmagic-design.com

  • Since upgrade to Windows 8.1, ICloud does not work

    Since upgrade to Windows 8.1, ICloud does not work.  I could click on buttons for Reminders, Notes, etc. and would take me into ICloud to share with other devices. No longer functions.

    Hi:
    I can't help you with why your PC won't upgrade to W8.1, but I can tell you that if you manage to get W8.1 to install, you won't be able to get the graphics to work anymore.
    There is no W8.1 driver for the graphics setup in your PC.
    So maybe it is a good thing that you can't get it to work. 

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • HT3180 In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

    Ouch.  I am afriad the news is not good.  If there is no longer a working firmware instance on ATV there is nothing you can do.  That's why it has that message about not unplugging it during the update.
    Nothing happens when you plug it in?

  • I have updated ITunes and now it does not work

    I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...

    Use this application to uninstall iTunes and all related components
    http://support.microsoft.com/mats/program_install_and_uninstall/en-us

  • After sending sound from find my iphone, now ipad does not work

    after sending sound from find my iphone, now ipad does not work
    it can't be unlock and scrren is blank, only siri works

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

  • Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • Creative cloud installed on the desktop, but when I start the window is white and does not work

    can someone help me?

    Thank god be with
    2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
        Creative cloud installed on the desktop, but when I start the window
    is white and does not work  created by Sheena Kaul
    <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
    the full discussion <https://forums.adobe.com/message/6672088#6672088>

Maybe you are looking for