Windows Proximity Un/Lock using ThinkPad Bluetooth with Enhanced Data Rate Software

While installing the driver for ThinkPad Bluetooth with Enhanced Data Rate Software, the installer asks whether I want to include additional features such as Windows Proximity Un/Lock, file transfer, and others. However, after installing, I cannot find the Proximity Un/Lock option anywhere.
Can someone please enlighten me as to how I can activate this built-in feature? THANKS!
-Raj

Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!!

Similar Messages

ThinkPad Bluetooth with Enhanced Data Rate Software Problem

I'm having a weird issue. I use a X200t tablet with Windows 7 Profession 64-bit.
Apparently my current "ThinkPad Bluetooth with Enhanced Data Rate Software" is Version. 6.2.1.2900.
Thinkvantage System Update wants me to download and install Version 6.2.1.3100.
However, it tries and I get Error 1935 and it rolls back. Now when I start windows I get an alert about BTTray.exe not loading.
Of course I searched this problem, but it seems to be some ancient thing (years old) and I've never had a problem before with any of the Bluetooth updates.
I did notice that in past versions people said when they tried to uninstall the old version and install the new one, it just wiped their hard drive. I don't want to risk that so I thought I'd check here if anyone knew what was going on.
Thanks!

Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!!

(Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.

All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Missing: Bluetooth with Enhanced Data Rate for vista

I was looking for the "Bluetooth with Enhanced Data Rate Software II" for vista
After I found the right page (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67250), it seem their is no link to the setup file
Any ideas?

glev55's link to the x6x Vista drivers is also fixed now.
Thanks to whoever reported it through Site Feedback!
I don't work for Lenovo. I'm a crazy volunteer!

Can't install Bluetooth Enhanced Data Rate Software II

Can't install Bluetooth Enhanced Data Rate Software II. When I try to install the software it says that there are no Bluetooth in my notebook, but it present in my configuration:
      0A69630
SBB INTCR I7-2620M PROC USB3.0
      45M3092
VBB GENWIN7HOMEPREM64
      0A59833
SBB GEN WIN7 HOME PRM64 EN
      0A69642
SBB 12.5PRMHDLDBCLTDPYMBBBRDAN
      45M4574
VBB 8GBPC3-10600DDR3 1333SODMM
      45M4839
SBB KEYBOARDUS ENGLISH
      0A69643
SBB FINGERPRINT READER
      0A69657
SBB CAMERA, HD 720P
      0A69654
SBB 320GB HRDDSK DRV,7200RPM
      0A68287
SBB NO MSSDRIVE
      0A69647
SBB TP BATTERY 29++(9CELL)
      41W1787
SBB CPK NORTH AMERICA
      0A68261
SBB BLUETOOTH 3.0
      45M4805
SBB IN.CENTADV.-N+WIMAX 6250
      0A68257
SBB INTMBBRD GB3000 3G GPS
      44C7986
SBB SIM CRD ATNT: USA
      0A69659
SBB LANGUAGE PACK US ENGLISH
X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.
Solved!
Go to Solution.

EvgenyP schrieb:
(in BIOS bluetooth option is "enabled")
In BIOS under "Security" - "I/O Port Access", too?
If it is so, press in the BIOS the keys Fn-F5 exactly one time (nothing visible will happen). End BIOS with F10 - yes and turn off the computer after the display backlight has turned off.
After starting the computer bluetooth should be active and the driver can be installed.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

Anyone using durable topics with high data volumes?

We're evaluating JMS implementations, and our requirements call for durable subscribers, where subscribers can go down for several hours, while the MQ server accumulates a large number of messages.
Is anyone using Sun MQ in a similar scenario? How is it holding up?
Sun folks, do you know of production installations that use durable topics with high data volumes?
thanks,
-am

We are using a cluster of Sun�s JMS MQ 3.6 with durable message queues and persistent topics. In a 4 hour window each night we run over 20,000 messages through a queue. The cluster sits on two Windows servers, the producer client is on a AIX box and the consumer is running on a iSeries. Within the 20,000 messages are over 400,000 transactions. Each message can have many transactions. Yes, the iSeries client has gone down twice and the producer continued with the message queue pilling up, as it should. We just use the topic to send and receive command and status inquiries to the clients. So every thing works fine. We have only had a couple issues with a client locking and that maybe fixed with sp3, we are in the process of installing that. The only other issue we have had is that once in a while the producer tries to send an object message with to many transactions and it throws and JMS exceptions. So we put a cap on the size of the messages, if its over a set number of transactions it send each transaction as separately, otherwise it sends all the transactions in one object type (linked list of transactions) message. Compare the cost of this JMS system with Tibco or Sonic and you�re looking at big savings.

How to use a queue with dynamic data

When using a collector I have found that it significantly slows down my loop times. I am using LabView7.1 on a Dell PC with Windows XP. If I use a queue with dynamic data do you think that will require less of my processor and allow for faster loop speeds?
I have created a queue using dynamic data in one loop and I want to retrieve all available samples each iteration in a slower loop. If I use the flush queue I get a 1d array of dynamic data. What is the best way to convert the 1d array of dynamic data so that the array of dynamic data is consolidated back into a single dynamic data type? Any help would be much appreciated.

Hi Dennis,
You could for instance wire the array to an auto-indexed for loop. I attach an example. I assume you wish to concatenate the arrays a singel waveform.
Hope it helps,
Pelle S
District Sales Manager
National Instruments Sweden
Attachments:
Dynamic queue.vi ‏245 KB

HT4108 can I use my IPAD with a data projector? and does the data projector have to be an iOS compatible one?

can I use my IPAD with a data projector? and does the data projector have to be an iOS compatible one?

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
Apple - AirPlay - Play content from iOS devices on Apple TV
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/ht4108
 Cheers, Tom

Could not use ThinkPad Bluetooth Laser Mouse (41U5008)

I bought a ThinkPad Bluetooth Laser Mouse today. unfortunately, i could not use it and tried a whole day but unsolved yet, any help will be highly appriciated.
My notebook model: T60, 2007BP1
setup details:
1) enable internal bluetooth in bios
2) switch on bluetooth radio
3) switch bluetooth connection on (Fn+F5)
4) install batteries, and power on
5) install driver
6) at the last step, a message showed that the program could not configure the mouse automatically, i need to set it manually
7) click to start finding bluetooth devices, an error message showed that bluetooth software certificate did not pass the check, it asked me to make sure the bluetooth device has been pluged in, and i have obtained the software license to use the this device, and the license is not expired.
8) also, i found the indicater light at the bottome of the screen (near to the wireless radio light) was turned off.
any help? thanks a lot

sorry, forget to mention the os:
winxp sp3

Using alternate rows with Spry Data Set

Can anyone provide more information on how to implement alternate row colors with a Spry Data Set? What I have done is:
Create spry data set using HTML page as the data set
The html page that displays the data set is: <div spry:region="equipment">
In the default.css page that is linked, I added the info in note #1 below
When the page displays, no colors appear. Tried changing the colors and still no luck. Is there another step to do?
Note #1:
within the default.css, the following are declared:
#equipment odd {
background-color: #CCC;
#equipment even {
background-color: “#F2F2F2;
Note #2:
Here is a link to see the actual pages referenced above.
Any ideas? Getting frustrated!! Thanks in advance for any advice.

You are going to kick yourself, but, you haven't assigned any page element the ID #equipment. The region is called that but the table or the DIV does not have an idea and your selector matches nothing...

Using htmlmarkup.xsl with a data template

Has anyone used a file called htmlmarkup.xsl, http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html, with a data template?
If I create my BI Publisher report using a data query in my data model, htmlmarkup.xsl works fine in converting the html text to bold or underline, or whatever I want it to be. But if am using a data template in my data model, the tags don't get converted and I still see the tags.
Any thoughts would be appreciated!
Thanks!!
Kris Henning
www.piocon.com

I was hoping you would help me with this!
Here is the data template:
<dataTemplate dataSourceRef="oltpdev" name="html" defaultPackage="html">
 <properties>
 <property name="xml_tag_case" value="upper"/>
 </properties>
 <parameters>
 </parameters>
 <lexicals>
 </lexicals>
 <dataQuery>
 <sqlStatement name="Q_1">
select manager_product_id,notes
from manager_product_note
where trunc(note_timestamp,'mm')='01-jun-2008'
 </sqlStatement></dataQuery>
 <dataStructure>
 <group name="G_notes" dataType="varchar2" source="Q_1">
 <element name="notes" dataType="clob" value="NOTES"/>
 <element name="manager_product_id" dataType="number" value="MANAGER_PRODUCT_ID"/>
 </group>
 </dataStructure>
</dataTemplate>
I just want to see the NOTES column correctly. Instead I get:
New Note
<ol>
<li>numbered list - normal font</li>
<li>bold font</li>
<li>bold and italic</li>
<li>underlined</li>
<li>italic only</li>
<li><strike>strike out</strike></li>
</ol>
<ul>
<li>bulleted list</li>
<li>next item</li>
<li><strike>Bold, Italics, Underlined and Strikeout</strike></li>
</ul>
You can tell this is a test case.
Thanks for your help!
Kris Henning
www.piocon.com

Create offline interactive forms using webdynpro java with XML data source

Hi Gurus,
I am having a scenario like below:
Sales guy request for order list online from portal- Sytem receives the request and creat XML file- from xml file need to create a Offline interactive form-Sales guy fills it offline at customer site- uploads in portal -on submit xml has to be generated with captured data at customer site-Process to ECC.
So my questions are:
How to create the offline interactive form from XML?
Once filled offline interactive form uploaded into portal how to create XML again from pdf ?
Please give some idea on this as this is my first Offline interactive form using XML datasource.
Thanks
Ravi
Edited by: Ravi Sunkara on Jul 27, 2010 5:25 PM

Hi Otto,
Sorry for replying lately. First of all I did not get your suggestions as your are editing the same posting.
Secondly we will be using WDJ. Actually in between SAP Portal and ECC we are having adobe LCES so we need to create Interactive form using XML only. Once it is filled again the form will be submitted to another application which is running on FLEX, which will process the order.
if you can give me your personal id i can send you the detailed process
Thanks
Ravi

Use of MIN with text data

I am not familiar with using MIN with text data as in the sample below and could use some help in deciphering what it is doing. This SELECT statement is taken from a larger CREATE OR REPLACE VIEW statement. The first line of the WHERE clause is making the connection to look at the correct user's information. The section after the first AND is what I am trying to interpret correctly. I have moved into a new position and wasn't around when this view was created. The statement is designed to assign the correct DOMAIN_ID to each user based on values in the elms.elms_dom_lkup table ed. This table consists of 4 columns: DOMAIN_ID, PROC_LVL, LOCATION, AND POSITION. The DOMAIN_ID is the only field that is not nullable. The primary key for the table is a combination of the 4 columns. The section after the first AND matches the PROC_LVL from the ed (lookup table) to the PROCESS_LEVEL in the cd (reference table) and confirms the process level is associated with the users primary position. It then looks for one of three conditions:
1. process levels match and LOCATION and POSITION are NULL
2. process levels match and LOCATION matches user's location in a reference table
3. PROC_LVL is NULL and POSITION matches user's position in a reference table
(SELECT MIN (domain_id)
FROM elms.elms_dom_lkup ed, mici.const_dept cd
WHERE c.constituent_id = cd.constituent_id
AND ( (ed.proc_lvl = cd.process_level AND cd.pos_level = 1
AND ( (ed.location IS NULL AND ed.position IS NULL)
OR (LOWER (ed.location) = LOWER (loc.campus))))
OR (LOWER (ed.position) = LOWER (c.job_desc)
AND ed.proc_lvl IS NULL))), /*Domain ID*/
My question revolves around the priority on those matches. The ed table is not organized in any manor. The records are in the order they were entered. Does the MIN in the SELECT statement cause the DOMAIN_ID

Hi,
Welcome to the forum!
If v is a string column (such as a VARCHAR2), then MIN (v) is the first string in collating order (that is, alphabetic order, but with numbers and punctuation symols given particular values in the ordering).
It lookw like the code fragment you posted is a Scalar Sub-Query , that is, a sub-query used where an expression is exprected. For example, in a query like this:
SELECT *
FROM    scott.emp
WHERE   sal     > 1200
;You can replace the literal 1200 with any kind of numeric expression, even
SELECT *
FROM    scott.emp
WHERE   sal     > (     --Begin scalar sub-query
                SELECT AVG (sal)
                FROM    scott.emp
            )     -- End scalar sub-query
;You have to be careful that a sclar sub-query produces exactly one column, and either 0 or 1 rows. You'll get a run-time error if the sub-query ever produces 2 or more rows.
People sometimes use MIN in situations like yours when the sub-query might otherwise return 2 or more rows, and either:
(a) all the non-NULL rows will contain the same domain_id, or
(b) it doesn't matter which domain_id is used, just so long as it is one that actually exists in the result set.
842436 wrote:
My question revolves around the priority on those matches. The ed table is not organized in any manor. The records are in the order they were entered. Does the MIN in the SELECT statement cause the DOMAIN_IDSorry, I don't understand exactly what you're asking.
Rows in a relational table are never in any intrensic order.
It looks like the question got cut off. Does the MIN in the SELECT statement cause the DOMAIN_ID to do what?
Edited by: Frank Kulash on Mar 7, 2011 3:01 PM
I see you corrected your first post.
842436 wrote:
... My question is does the MIN in the SELECT statement cause the DOMAIN_ID from the first record that meets any of the 3 conditions to be returned?Yes, it makes the sub-0query return the first domain_id ( in alphabetic order ) that meets all the conditions. If there are 1,000 rows that meet all the conditions, the query will ind all 1,000 of them, keeping track iof which one is first in alphabetic order. Remember that
'127.255.255.0' is less than
'25.0.0.0' in alphabetic order, because '1' is less that '2'.

I would like to use your 6035E with Matlab, Data aquisition toolbox.

What drivers do I have to have to use the 6035E AD card with Matlab, Data aquisition toolbox?
thanks

You will have to check with Mathworks and see if they have a driver for that board that works with their software.
Otis
Training and Certification
Product Support Engineer
National Instruments

Windows Proximity Un/Lock using ThinkPad Bluetooth with Enhanced Data Rate Software

Similar Messages

Maybe you are looking for