Windows Randomly Freezes when Resource Monitor Disk Highest Active Time Maxed Out

I'm getting this same problem as this person:
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4e33c8d9-fc3d-434b-8dd0-29965d1aa0a2
Except that it seems to happen at random.  While playing a game, browsing the net or when it's just sitting idle.  
Hard drive light goes solid, the blue line (% highest active time) in the resource monitor disk graph stays peaked at 100% but
relatively little or no hard disk activity.  
My mouse is also usually still responsive. 
Some apps will continue to work, but if I click on them they will usually become unresponsive, same goes if I attempt to click on the Windows Start button.  If I'm playing a game, it will stutter or freeze and a .5-1 second sound clip will continuously loop
until it's done (meaning the hard drive light is no longer solid and blue line is no longer peaking). 
It is also the same for me that occasionally the OS will freeze completely and I will need to hold down the power button to reboot, but this is usually more rare.
I've checked the Event Viewer and there are no errors that coincide with the problem. 
I've run chkdsk and no errors were returned.  Same when I ran Memtest86+ to check RAM, no errors.
My stats are:
-Windows 7 Ultimate 64 bit SP1
-Intel Core i-7 960 3.2Ghz 
-eVGA 132-BL-E758-A1 X58 Motherboard
-Corsair Dominator 12GB TR3X6g1600C8
-eVGA 012-P3-1472-AR GeForce GTX 470 (Fermi) SuperClocked 1280MB 320-bit GDDR5 (x2 SLI)
-CORSAIR HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified Modular PSU
-VelociRaptor WD3000HLFS 300GB 10000 RPM 16MB Cache SATA 3.0Gb/s HDD (x2 RAID 0)

Hi,
How about updating the BIOS and all devices' driver from the manufacture's site?
I suspect it is the task schedule running in the background. If you want to narrow down the issue, you may need some monitor tools and then analyze.
http://technet.microsoft.com/en-us/sysinternals/bb896645
To analyze the process, it is better to contact Microsoft Customer Service and Support (CSS) via telephone to get more efficient support.
Microsoft Customer Service (800) 426-9400 is available Monday through Friday, from 6:30 A.M. to 5:30 P.M. pacific time.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Dv4-1275mx freeze for few mins and disk 100% highest active time.

               I bought a dv4-1275mx in june and about a week ago, my laptop started to freeze for few minutes and come back.In that time, i didn't do anything and when i checked Resource Monitor (already opened), i saw 100% in Highest Active time in Disk with small data read. This happened several times and when i checked the events, i found following,
    Error    6/23/2009 10:08:42 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Warning    6/23/2009 9:52:40 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Application​s\Windows\Windows.edb"" at offset 2482176 (0x000000000025e000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 1 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 84 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
    Warning    6/23/2009 9:51:15 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Application​s\Windows\Windows.edb"" at offset 2523136 (0x0000000000268000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 0 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 5515 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
    Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
    Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
               In yesterday, I got and error message after windows start saying there is a problem in svchost module.Therefore i restart my laptop and then i didn't get any error messages.Then i tried to start firefox after about 5 mins and got a error message saying it stopped by data execution prevention.After about 1 min, i got a message saying windows will restart in 1 min and in restart, it did a checkdisk.After that i didn't got any error messages but i couldn't open firefox, therefore i installed it again and i found following events.
    Warning    6/29/2009 7:26:35 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Warning    6/29/2009 7:26:01 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Warning    6/29/2009 7:25:49 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
    Error    6/29/2009 7:25:02 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
    The system cannot find the file specified."
    Error    6/29/2009 7:25:02 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    4001    None    "WLAN AutoConfig service has successfully stopped.
    Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    10002    None    "WLAN Extensibility Module has stopped.
    Module Path: C:\Windows\System32\bcmihvsrv64.dll
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Profiles> failed a notification event.
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6000    None    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event.
    Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Sens> failed a notification event.
    Error    6/29/2009 7:23:47 PM    Microsoft-Windows-EventSystem    4621    Event System    The COM+ Event System could not remove the EventSystem.EventSubscription object {CEB8B221-89C5-41A8-98CE-79B413BF150B}-{00000000-0​000-0000-0000-000000000000}-{00000000-0000-0000-00​00-000000000000}.  The HRESULT was 80070005.
    Error    6/29/2009 7:22:41 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Error    6/29/2009 7:19:31 PM    Service Control Manager    7032    None    "The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error:
    An instance of the service is already running."
    Error    6/29/2009 7:19:31 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0xb98, application start time 0x01c9f8c04759c999.
    Error    6/29/2009 7:18:27 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X xD Host Controller' (PCI\VEN_197B&DEV_2384&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0428) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X MS Host Controller' (PCI\VEN_197B&DEV_2383&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0328) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD Host Controller' (PCI\VEN_197B&DEV_2381&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0228) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD/MMC Host Controller' (PCI\VEN_197B&DEV_2382&SUBSYS_30FB103C&REV_00\4&2a​995034&0&0028) disappeared from the system without first being prepared for removal.
    Error    6/29/2009 7:17:27 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x0000000000002339, process id 0xff8, application start time 0x01c9f8c023973749.
    Error    6/29/2009 7:16:26 PM    SecurityCenter    6    None    The Windows Security Center Service was unable to load instances of AntiSpywareProduct from WMI.
    Error    6/29/2009 7:16:20 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0x1c4, application start time 0x01c9f8bf81c900ad.
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The Norton Internet Security service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion."
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7009    None    A timeout was reached (30000 milliseconds) while waiting for the Norton Internet Security service to connect.
    Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
    The system cannot find the file specified." 
    I can attach Full events if want. Is this problem comes due to an hardware or OS error? Pls help.
    Thanks. 

    I own two of the dv4-1275mx laptops.  Both machines were purchased around June of 2009 from Best Buy, and both machines are doing the same thing as what has been described here.  It appears that this model has a flaw, or certain production runs have this flaw.  I have done an exhaustive amount of research about this problem and know quite a bit about it.
    But, good luck getting HP's Customer No-Service department to actually fix the problem.  If you try to get them to fix it, you are about to be taken for quite a ride.  They have been absolutely no help in diagnosing the problem, and I am still trying to get them to acknowledge and fix the problem with these laptops.
    The problem is with the hard disk controller.  It happens both with the built-in hard disk drive and with an external disk drive.  It occurs whenever you place a significant load on the disk controller.  When the problem occurs, the machine will lock up for 60 seconds at a time.  Eventually, the driver times out, resets the disk, and drive activity continues until it happens again.
    Normally, the problem is very intermittent because normal usage of the machine doesn't always trigger this problem.  However, I have been able to replicate the problem consistently using a backup program called Macrium Reflect (free edition).  If I use Macrium Reflect to back up or restore the hard disk image using an external disk drive plugged into the eSATA port, then the ATAPI errors in the log appear immediately after it begins copying data.  Eventually, the backup will fail.
    The worst part about this is the data corruption.  If the lock-up condition occurs when a disk write is happening, then the data being written will get corrupted and you will lose data.  I have had disks that have gradually gotten so corrupted that they won't boot anymore.  I have spent a countless number of hours backing up, restoring, and attempting to use the machine despite these problems.
    After doing further research and testing, it appears that this type of problem is not uncommon to the AMD M780G / ATI Radeon 3200 chipset that these laptops use.  If you search the Internet for this type of error, you will find a number of HP and Non-HP customers complaining about this same issue with this chipset on different machines.  This leads me to believe that the problem might be with the chipset itself.
    I have attempted to find a software remedy to the problem with no success.  This included trying all of the following:
    - Trying Windows Vista 64 with various configurations of service packs and updates.
    - Using the Microsoft AHCI driver and the ATI-supplied AHCI driver for the Radeon 3200 series
    - Using different BIOS revisions
    - Trying to find a magic combination of AHCI driver and BIOS revision that would work
    - Trying various settings for disk write caching
    - Turning of DMA on the controller
    - Uninstalling every piece of HP-supplied software that I could think of that might have even the slightest possibility of interfering with the hard disk controller
    None of this worked.  Eventually, I concluded that this is a hardware problem that isn't going to get fixed through software.
    Sadly, after doing all of this research, HP has not been helpful with getting this problem fixed.  In the past, I have owned laptops from Dell and Toshiba, and while I know that no manufacturer is perfect, I have not had many issues getting prompt and reliable service from either of those two companies when I needed it.  This is the first time I have purchased an HP laptop.  And after the customer no-service experiences I have had, it is likely to be the last time I purchase an HP laptop.
    HP's technical support seems to think that re-imaging the drive to reset the machine to factory defaults cures all problems.  Over the phone, they have made me do this a couple of times, insisting that the problem is a result of a virus or something I installed on my machine.
    Recently, I sent both of my laptops to them for service.  To assist them, I included the details of all of the research that I had done.  I gave them copies of this information both electronically, and included inside the box with the laptop.  The information had details on the steps that I tried, and links to websites documenting problems with the M780G chipset.  It also had details on how to replicate the problem with Macrium Reflect.  I even re-imaged the machine back to the factory image, and installed Macrium Reflect for their convenience.  And what did HP's service department do?  They re-imaged the hard drive again and sent it back to me without even bothering to run my test!  This is just absolutely moronic.  Either the service technician can't read, or the service technician just doesn't care about fixing customer problems!
    My complaints about HP's service are as follows:
    There is no sense of urgency about fixing problems.  I have been enduring this issue for 9 months now.  But no one seems to care.
    It takes forever for them to turn around machines in their service department.  With Dell, I used to have a working laptop in my hands in 5 days, tops.  What's worse is that they ship the packages via FedEx Ground with signature confirmation.  (If you work a normal day job, good luck trying to get your package from FedEx Ground, which is only open when I am at work.)
    The telephone and online support personnel often don't listen to you, and the details of problems don't ever seem to be recorded anywhere.  I have had to explain this problem over and over for various people who seemed almost completely ignorant about the problems I have been experiencing.
    The technicians are not competent, even when you tell them what needs to be fixed.
    As far as I am concerned, HP has not been honoring the warranty on my machines.  This is has been frustrating beyond words.  I am at the point where I just want two new laptops without this chipset, but I seriously doubt I will ever get that.  To all of you who are experiencing the same issue as I am, I wish you the best of luck in getting HP to resolve this problem--you are going to need it!

  • Workshop 6u1 installation freezes when checking for disk space

    Hi!
    I've trying to install Workshop 6 update 1 but while installing and the application is checking for disk space it just freezes on me. One important thing, this system had Workshop 4, 6u1 and 6u2 installed. I removed the package for ws4 and untinstalled ws6u1 and ws6u2 from /var/sadm/prod/com.forte....... for each one of the versions.
    Do you have any idea what is going on, why it freezes when checking for disk space???
    thanks,
    Jorge

    Hi,
    command: cmd.exe /c D:\oracle e-business suite R12\oracle ebusiness suite\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin C:\msvc
    'D:\oracle' is not recognized as an internal or external command,
    operable program or batch file.
    RW-50011: Error: - System Utilities Availability test has returned an error: 1Please do not use spaces in directory names, spaces are not allowed and it is expected to get such errors because of the spaces.
    Host/Domain
    command: ping -n 1 windows7-pc
    Pinging WINDOWS7-PC [fe80::4c7b:9a58:f4b2:e7c5%12] with 32 bytes of data:Please note that Windows 7 is not certified as a database/application tier node.
    Thanks,
    Hussein

  • Windows 8 freezing when using Firefox

    When I'm using Firefox or Chrome browsers the whole entire PC is freezing.
    Already posted my issue on the Microsoft Community forum, where you can read the details and the troubleshooting steps I tried:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-freezing-when-using-chrome-or-firefox/d6bad301-6c55-4469-96cb-0ec3d43e1113
    Also I found another post here on the Mozilla forum, who had the same issue and he did not seem to solve it either: https://support.mozilla.org/en-US/questions/975278?esab=a&as=aaq
    Please help me to fix this annoying issue! Thx!

    Well, the MS site was a bust, wasn't it?
    it would help to know how Firefox is configured.
    Can you send me your troubleshooting information from the Firefox installation that's having issues? This is a good part in troubleshooting.
    *Navigate to <code>about:support</code> via Address Bar
    *Click the button that says <code>Copy text to clipboard</code>
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps for Firefox version 29.0 and above:
    *Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window, click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Note that if this issue happens in both Chrome <b>and</b> Firefox that it may be a system issue and not a Firefox related issue,
    Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Hard Drive Highest Activity time 100%

    Hello. I own a Portege R835-P94. I was using it normally, just surfing the web and suddenly it turns really slow and unresponsive. I noticed that the hdd led stays green (not blinking, just solid green) and I opened task manager trying to find the problem. No processes were usign so much resources but in the resource monitor the disk activity shows some abnormality. The highest activity time was 100%. I restart my laptop and the problem was gone for a couple of minutes but it came back again and this time a blue screen error appeared.
    I attache an image that shows the activity of the disk in wich you can see a peaks of activity time. Each time it reaches 100% the hard drive make an abnormal sound.
    Is a 640GB disk with 454GB free space.
    I have desfragmented the disk, chek for erros but nothing works. I hope some of you can help me. 
    (sorry for my bad english)
    Attachments:
    resources.png ‏76 KB

    Portege R835-P94
    Show us the whole path, so we can see the file name.
     a blue screen error appeared
    And attach the corresponding *.dmp file from the C:\Windows\Minidump folder.
    -Jerry

  • 100% highest active time for HDD

    I have the 100% highest active time issue....
    This seems to be a well known problem, however no solution is found for it yet. I have done pretty much everything imaginable from scans to system tuneups and configurations.
    I reinstalled the OS (several times with different versions like pro, ultimate, enterprize ), switched to win 8... got the latest Bios update, got the latest drivers from HP then downloaded them from intel website, I even got the driver for the disk from the manufacturers website, changed the AHCI mode to RAID (- which also enables AHCI btw)... nothing works.
    The completely fresh install of any OS with only the drivers installed runs the HDD on 85-100% in idle.
    I have some experience in this and from what I saw till now, the Highest active time varies normaly between 10-25% (more or less) even if your disk is performing some more demanding stuff.
    Till recently I thaught that my HDD is to blame, but its not...other guys also face the same issue after replacing it.
    (The disk and memories installed also pass all diagnosticks and checks without problem)
    With i5 540m - 2.53 ghz, 8gb memory and the overall performance of the system is unbelivable LOW.
    I have issues browsing the web, not mentioning other stuff.
    Please, whoever reads this post and decides to advise with some solution like disabling search indexing for windows, or sfc scan or drive diagnosticks or pagefile size changes/ disabling, editing the startup services/apps, defrag/cleanup and so on and so on... You can spear that time for you cause the list of the things Ive done to solve this issue is allready too long to fit it in this post.
    Recently I ordered an original instalation kit from HP which should arrive soon but at this point I think that the issue can only be solved by replacing the laptop.
    *I have no idea what the kit contains, but this is the only thing I havent try yet.
    Can this be Kernel related?
    Does anybody have any ideas or permanent fix for this???

    I have the 100% highest active time issue....
    This seems to be a well known problem, however no solution is found for it yet. I have done pretty much everything imaginable from scans to system tuneups and configurations.
    I reinstalled the OS (several times with different versions like pro, ultimate, enterprize ), switched to win 8... got the latest Bios update, got the latest drivers from HP then downloaded them from intel website, I even got the driver for the disk from the manufacturers website, changed the AHCI mode to RAID (- which also enables AHCI btw)... nothing works.
    The completely fresh install of any OS with only the drivers installed runs the HDD on 85-100% in idle.
    I have some experience in this and from what I saw till now, the Highest active time varies normaly between 10-25% (more or less) even if your disk is performing some more demanding stuff.
    Till recently I thaught that my HDD is to blame, but its not...other guys also face the same issue after replacing it.
    (The disk and memories installed also pass all diagnosticks and checks without problem)
    With i5 540m - 2.53 ghz, 8gb memory and the overall performance of the system is unbelivable LOW.
    I have issues browsing the web, not mentioning other stuff.
    Please, whoever reads this post and decides to advise with some solution like disabling search indexing for windows, or sfc scan or drive diagnosticks or pagefile size changes/ disabling, editing the startup services/apps, defrag/cleanup and so on and so on... You can spear that time for you cause the list of the things Ive done to solve this issue is allready too long to fit it in this post.
    Recently I ordered an original instalation kit from HP which should arrive soon but at this point I think that the issue can only be solved by replacing the laptop.
    *I have no idea what the kit contains, but this is the only thing I havent try yet.
    Can this be Kernel related?
    Does anybody have any ideas or permanent fix for this???

  • Why is Windows 7 freezing when using Firefox?

    -Has been happening for months now with many attempts to pinpoint cause. Have come to the conclusion that it is Firefox but don't understand why.
    -When using Firefox, my entire PC, not just Firefox, will freeze. Sometimes it happens within the first 5min of using Firefox, other times it could happen an hour into a session. A hard restart is the only way to get back to my desktop as I have waited an hour before after a freeze and nothing happens. Mouse pointer won't move, nothing.
    -Initially thought it was a hardware issue or an anti-virus issue.
    -Reinstalled windows on three different hard drives that all pass the disk check. Still happens
    -Installed windows 8 to see if that would fix the problem. Nope, does the same thing on Windows 8.
    -Ran Memtest 86+ for 14 hours one night to see if it was my memory. Nope, zero memory errors found
    -To be sure I even tried only using one stick of ram in my PC at a time to see if any of the sticks were bad. Nope, it froze with every stick
    -Tried changing my anti-virus. It froze with every single one, AVG Free, Avast Free, Microsoft Security Essentials.
    -I figured out that my PC only freezes when I am browsing the web in firefox. If I use chrome or Internet explorer, it doesn't happen. These total PC freezes only happen when I am using firefox.
    -My only add on/plug in that I am using is Adblock plus besides the default ones that come with Firefox.
    -My firefox is up to date, I have reset it and reinstalled it [while only adding Ad Block +] and this still does not fix the problem
    -In the windows event log the only thing that happens every time my PC freezes is the Error "Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D", why this would only affect Firefox, I don't know.
    -I would like to figure out the cause of this because I would really like to use Firefox again.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Random reboots when resuming from disk (aka hibernation)

    Hi,
    I've noticed that since the Linux 3.17.1-1 upgrade, my laptop frequently fails to resume from disk : after I turn the system on, GRUB kicks in and the system immediately reboots itself (which leads to fsck checking the filesystem). The weird thing is that it seems to be a completely random behavior, as at least half of the time resuming from disk works as it always had.
    Of course, the logs don't show anything about it as the failure occurs before the kernel is loaded. However, there's a couple of ACPI-related warnings that I wonder whether they're trying to tell me something:
    [ 0.174166] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.174557] ACPI: Dynamic OEM Table Load:
    [ 0.174565] ACPI: SSDT 0xFFFF880118886000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.184302] ACPI: Dynamic OEM Table Load:
    [ 0.184308] ACPI: SSDT 0xFFFF880118A47800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.197523] ACPI: Dynamic OEM Table Load:
    [ 0.197528] ACPI: SSDT 0xFFFF880118A70800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.211364] ACPI: Interpreter enabled
    [ 0.211372] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.211377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.211392] ACPI: (supports S0 S3 S4 S5)
    [ 0.211394] ACPI: Using IOAPIC for interrupt routing
    [ 0.211419] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.228928] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.230264] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.230682] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.230879] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.231061] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.231413] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.231628] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.232566] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.237796] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.244692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
    [ 0.244743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.244792] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.244840] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.244888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.244937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.244988] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.245037] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.245197] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.245273] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.245532] PCI: Using ACPI for IRQ routing
    [ 0.255510] pnp: PnP ACPI init
    [ 0.255639] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.255784] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.255816] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.255869] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.255919] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.255980] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.256020] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
    [ 0.256221] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.256296] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.256438] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.256470] pnp: PnP ACPI: found 10 devices
    [ 0.393967] ACPI: Lid Switch [LID]
    [ 0.394093] ACPI: Sleep Button [SLPB]
    [ 0.394201] ACPI: Power Button [PWRF]
    [ 1.254778] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.337375] asus_wmi: Backlight controlled by ACPI video driver
    [ 1.362831] ACPI: bus type USB registered
    [ 1.732186] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.733010] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.733040] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.733714] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.733725] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.737970] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.737979] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.793602] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.793992] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.794003] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 8.830064] ACPI: Battery Slot [BAT0] (battery present)
    [ 8.830950] ACPI: AC Adapter [AC0] (off-line)
    [ 8.919453] ACPI: Thermal Zone [THRM] (37 C)
    [ 9.007936] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140724/utaddress-258)
    [ 9.007942] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
    [ 9.007946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.007950] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
    [ 9.007953] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
    [ 9.007956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.007957] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
    [ 9.007960] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
    [ 9.007963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.007964] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
    [ 9.007967] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
    [ 9.007969] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.027976] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140724/utaddress-258)
    [ 9.027985] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [ 9.027991] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    I use the asus_wmi module in this system and, as it is an Intel chipset, I've proceeded to load the intel-ucode as the first initramfs as recommended. Tell me if you need further information.
    Thanks in advance!
    Last edited by nvteighen (2014-10-27 12:17:34)

    giddie wrote:You might want to try removing the intel-ucode package (and amending your initrd config so that it won't complain) and see if the problem persists?
    OK, I've made a try by deleting all references to the intel-ucode initrd at /boot/grub/grub.cfg, so that the microcode update is not applied. Afterwards, I rebooted the system so that there is no trace of the microcode update left on the system and proceeded to do some normal usage of the laptop. Then, I've hibernated it, left it like that for a couple of hours and then, turned it on again. The process failed again without warning whatsoever and rebooted to a normal boot sequence.
    Looking at all the suspend-to-RAM issues that people are also posting in these forums, I believe this is a bug in Linux 3.17, unrelated to the microcode thing.

  • IPod randomly freezes when playing tunes

    My Ipod 30gb randomly freezes during a song. Sometimes it freezes for a few seconds and sometimes it can freeze for a couple of minutes. It then just carries on playing.
    It is not always the same song and can include songs purchased from Itunes as well as CD's downloaded - i.e. it is totally random.
    All of the songs play perfectly on Itunes. I have only about half filled the iPid so am not really in the market to upgrade.
    It has only started doing this about for the last two months.
    Could some dust or something have got into the IPod or could it be a battery issue ( although I try to keep it at full ).
    I have downloaded the lastest updates of software ( 1.3 ) and always click on the update software buttom when am synching. I have also done a restore and all the other troubleshooting bits to no avail...
    Help....

    Hi,
    Well my friend got me an ipod 20gb 4th gen from ebay. It randomly froze and unfroze the eventually crashed and the HDD had errors, i couldnt connect it to pc it kept falling and showinfg errors but it sometimes loads and plays songs and frezzes but anyway i maneged to get it so it plays songs and restore it now i need to borrow a friends wall charger to finish its restore.... Listen to the hdd it should just be a smooth wirr if it wirs up and down like mine did (e.g. spin up and then off) its a HDD issues and u need to fix it soon. if under warranty take it to apple or pay to fix it. i have no idea how to solve it but this might help. try this..put it into diagnostic mode by resetting it, and then holding select and the back arrow select all test and it will tell you if has issues.
    diognosis test and what they mean
    A. 5 IN 1: This runs the following 5 tests at once (J through N as listed below): LCM, SDRAM, RTC, FLASH/CHECKSUM, and FIREWIRE/FW ID. If you have a 3G iPod, at the end of the test, your buttons will now play a series of sound effects.YOU MUST PRESS ALL BUTTONS WHOTH IN % SECS SO IT CAN CHECK THEM
    B. RESET: Can your iPod reset? Run this test and find out.
    C. KEY: After you start this test, you need to press all the buttons on your iPod within 5 seconds. If you don't do it fast enough, it will fail.
    D. AUDIO: Plug in headphones, but don't expect an electronic rendition of Pink Floyd's Dark Side of the Moon. This test checks the audio subsystem. You will see a message that says "0X00000000 DONE" if your iPod passed the test.
    E. REMOTE:
    This will test your iPod's Remote if you have one. Plug it in or the test result will be "RMT FAIL".
    F.FIREWARE: Checks your iPod's FireWire port. A successful completion of the test will return "FW PASS".
    G. SLEEP: Will put your iPod to sleep. You will need to reset your iPod to wake it back up.
    H. A 2 D: Tests the iPod's power. Your results should look something like this: "3.7V 0X000000E2 CHG OK FW 1 BAT 1". The results will be different depending if your iPod is plugged into your computer, a wall outlet or is just running off battery power.
    I. OTPO CNT: Tests your scroll wheel. Results are returned in hexadecimal.
    J. LCM: The LCM is your iPod's screen. Keep pressing the "Select" button to toggle through several pattern tests.
    K. RTC: Tests the iPod's built-in "Real Time Clock".
    L. SDRAM: The RAM memory test. Hopefully it will tell you "PASS"
    M. FLASH: Your iPod has built-in Flash memory that stores firmware information. This test will tell you what Firmware version you have installed.
    N. OTPO or
    Wheel A2D: Tests the A2D (analog to digital) input of your iPod's scroll, touch or click-wheel. You need to reset your iPod to exit this test.
    O. HDD SCAN: Scans your iPod's hard drive. This is a great way to see if you have a healthy iPod. This test will take a few minutes so be patient.
    P. RUN IN: Tests your iPod's chip sets continuously.
    Try all test and try another hard rest and resotre even though you have if game andd no how open ipod dissconnect battery to hdd lead and leavee for 20 mins or discharge ipod and charge then see if it fixes it or clean ipod out being carfull not to break or touch anything
    hope this helps....

  • Windows 7 Freezes When Copying to QNAP NAS-TS210

    I have been using a QNAP-NAS TS210 with Windows 7. It worked perfectly until HDD2 failed and had to be replaced. There were some minor issues after I replaced the drive and QNAP tech support suggested that I update the firmware.
    Since then Windows freezes when I try to copy files to the NAS. QNAP support has no idea how to fix. I even reformatted the system drive and reinstalled Windows and 2 days later it started happening again.
    Any help would be much appreciated.

    Hi Mark_OD,
    Does this issue occur on all files or only the large files ? Can you get into the Task Manager by using “Ctrl + Alt+ Del” to check the freezing process when the Windows 7 is freezing ?Are there any warnings or errors related to this in the
    Event Viewer?
    Please take the following steps to have a check .
    1. According to my research ,this may be caused by the Tcp/IP configuration. Please run the following command in the command line in Windows 7 to have a check:
    netsh interface tcp set global rss=disabled
    netsh interface tcp set global autotuninglevel=disabled
    netsh int ip set global taskoffload=disabled
    2. “I even reformatted the system drive and reinstalled Windows and 2 days later it started happening again.”
    It seems that it will work correctly for two days after reformatting the system drive and reinstalling Windows, right ? If there is a antivirus software in it ,I recommend you to turn off it temporarily to have a try.
    Best regards

  • P67A-C43 / Windows 7 64-bit freezes when idle or during low activity

    Greetings,
    I've seen a few similar topics regarding freezes when idle or near-idle, but the troubleshooting steps I've tried don't seem to work. My P67A-C43 with an Intel 2500K Core i5 is not overclocked. It is repeatedly freezing in Windows 7 64-bit. It also did this when I was running Vista 64-bit. I also have Mac OS X Lion on this PC, and I never get freezes under OS X. This appears to be something related to how Windows interacts with idling or lower-power states. But I can't figure out what.
    I have tried this with windows on a mechanical HDD and with the current SSD - no change.
    I have tried running just one RAM module at a time - they both individually exhibit the behavior.
    I have tried switching graphics cards from a GeForce 6500 GT to the current Radeon HD 6850 - no change.
    I have tried switching power supplies from an Inland Gold 500W to the current OCZ 650W - no change.
    I have tried switching from Intel SVID to APS mode stepping - no change.
    I have tried switching C-States off - the system didn't freeze, but it got VERY hot under no load. Without C-states turned on, the CPU temperatures quickly reach 95C to 98C.
    I've got the latest BIOS, the latest drivers, and everything else I can think of. Any more ideas?

     
    WOW do I feel silly.
    I opened the case to take a good look at the processor cooling, and found that the fan/heatsink assembly was not snapped in on one of the posts. The pre-applied thermal paste was only flattened on one side of the copper contacts for the heatsink.
    I re-attached and snapped it all back in, and now my BIOS temperature reading is about 55C, whether C-State is on or off. In Windows without much of a load, it was 40-45C with C-States off, and 33-45C with C-States on.
    What I've learned:
    - double check your connections
    - C-States is an amazingly effective system
    - Intel makes some darn tough chips. They'll work (sort of) even if you install them wrong. 
    I'm still not sure if the freezing is fixed - I don't know how long I've been running without a proper heat sink. I'll leave it idling overnight (It's 23:30 here now), and see if it freezes.
    Thanks for the help, guys. This is a nice forum.

  • Firefox randomly freezes when accessing bookmarks

    Firefox randomly (about 1 in 50 times) will freeze when accessing folder located on the Bookmarks Toolbar. The folder will expand as blank without any bookmarks in it and then FF will stop responding. I've reinstalled FF, deleted appdata/programdata FF folders, created new profile. The issue remained.

    Hi dry4ng,
    I am sorry to hear that sometimes that when opening folders that they open blank and it causes Firefox to start to hang.
    When you tried a new profile and a new folder, how did you create the folder, and is it the same folder giving issues?
    Over how many bookmarks are you talking? and is there anything distinctive about the folder? size, depth, type of links etc?

  • Making a loop that will stop when a double or a float will max out

    Can someone tell me to how I can create a loop that will take a float abd a double value each with a beginning value of 2 and double each value until both variables run out of memory, and return the maximum valid value for each variable? I assume I will need two loops to do this, but I am not sure how to get the loop to stop. I have had the values go into crazy negative numbers when it starts to max out.

    So it does. Apparently that example only works for fixed point math... I did
    System.out.println(Double.MAX_VALUE * 2);and it said "Infinity" which I find a little humorous. In any case, try the static methods Float.isInifinite() and Double.isInfinite()
    EDIT: even weirder!
    public static final double POSITIVE_INFINITY = 1.0 / 0.0;

  • Random freezes when requesting downloads, opening Page Info window, while opening tabs, etc.

    I'm running Windows on a SSD, so everything's fucking quick. Opening FF is fine and quick too, it doesn't freeze, it's smooth and work perfectly.
    Here's my problem. When I'm opening the Page Info window, it sometime freezes, sometime not. It's the same thing when I'm starting a download. Opening tabs CAN do it, but less often.
    I've completely deleted FF (removing my personal settings), then reinstall it, but the same problem appear. FF Sync is configured and working though, I don't know if it could be the problem.
    Well I hope you can help me guys, if you need more information about my system configuration, please ask!
    Dave

    My thinking is that Plasma is not "playing" nicely with nvidia, I have two systems in my pc, one with kde4 and the other one (my testing system) with plasma, kde4 runs as it should, no lags, no freezes, no redrawing problems, fast and smooth. My plasma system is really not there, I tweak both systems the same, 20-nvidia.config on the xorg.d folder created by the nvidia settings, same where I also tweak all settings to juice my video card to its fullest (a really weak one by the way, a fanless gt430) and the triple buffering enabled for kde. I do have freezes with Plasma that lock the whole system, no keyboard input, and its been more or less the same since its release (for me that is), I am keep waiting to see if the "next" release would do, 5.3 still not yet. I also notice that compositing effects makes things worst, for example, snapping a window to a corner or to maximize when wobbly effect is on is a sure shot for a freeze for my system, I just update today the linux kernel and the nvidia driver, would see if that helps a little. My advice, for a stable system stick to kde4 still.
    Edit: Note, I have a good old amd phenom 6 cores and I always run it with some over-clocking, never have issues with that on my previous install or my main system.
    Last edited by RJQ (2015-05-08 15:43:16)

  • Why does my Mac Air when on the internet the window just freezes when loading?

    MacBook Air 13, 1.8 GHz Intel Core i5, 4 GB 1600 MHz DDR3, Macintosh HD, Intel HD Graphics 4000 1024 MB, OS X Yosemite 10.10.3
    When connected to the internet things run pretty smoothly, then when I change sites or load another window it sometimes starts the load and then freezes. Sometimes I can delete the window and continue with an open window or everything just quits loading. I have tried to clear history, no help; I have cleaned disc and removed large files to free space, no help. The only thing that seems to help is shutting down an restarting, sometimes have to do this more than once.

    Problem description:
    When opening a page on internet it sometimes freezes and will not load. When trying other website they will not load. I’ve had this problem since loading Yosemite.
    EtreCheck version: 2.2 (132)
    Report generated 5/1/15, 9:36 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Air (13-inch, Mid 2012) (Technical Specifications)
        MacBook Air - model: MacBookAir5,2
        1 1.8 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 29 - SN = D8625120HT3DKRNAV
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:15:21
    Disk Information: ℹ️
        APPLE SSD SM128E disk0 : (121.33 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 120.47 GB (25.03 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Click for support]
    Problem System Launch Daemons: ℹ️
        [running]    com.seagate.TBDecorator.plist [Click for support]
    Launch Agents: ℹ️
        [running]    com.brother.LOGINserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [failed]    com.seagate.dashboard.plist [Click for support] [Click for details]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Garmin Express Service    Application  (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
        CrossOver CD Helper    Application  (/Applications/CrossOver.app/Contents/Resources/CrossOver CD Helper.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        TuneupMyMac    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1Password
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Seagate Dashboard for Mac OSX  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 120.47 GB Disk used: 95.44 GB
        Destinations:
            Seagate Backup Plus Drive [Local]
            Total size: 2.00 TB
            Total number of backups: 42
            Oldest backup: 2015-02-09 17:30:10 +0000
            Last backup: 2015-04-25 10:36:34 +0000
            Size of backup disk: Excellent
                Backup size 2.00 TB > (Disk size 120.47 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             2%    fontd
             0%    taskgated
             0%    notifyd
             0%    cloudpaird
    Top Processes by Memory: ℹ️
        444 MB    kernel_task
        209 MB    com.apple.WebKit.WebContent
        164 MB    mdworker(7)
        106 MB    Safari
        78 MB    UserEventAgent(2)
    Virtual Memory Information: ℹ️
        180 MB    Free RAM
        3.82 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 1, 2015, 09:20:58 AM    Self test - passed
        Apr 29, 2015, 08:47:36 PM    /Library/Logs/DiagnosticReports/awacsd_2015-04-29-204736_[redacted].crash
        Apr 29, 2015, 08:46:35 PM    /Library/Logs/DiagnosticReports/awacsd_2015-04-29-204635_[redacted].crash

Maybe you are looking for

  • Workflow Manager 1.0 will install but NOT configure.

    Hello everyone,      I have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine that is hosting Sharepoint 2013.  I attempt to go into the Workflow Manager Configuration.  That comes up and asks me if

  • Export LE7 Files to Itunes?

    Hi I wondered if there was any way of exporting my Logic Express 7 work into Itunes or an audio format file? Thanks

  • Workflow triggered twice. Triggered using Message Control/Output Types

    I created an output type for VA01. After creating (then saving) SO, workflow is immediately triggered which shouldn't be the case since I have to run program 'rsnast00' to trigger workflow. So workflow is triggered twice during the process. How do i

  • Different Sizes with same file.

    Hi All, I have made 2 post script files from 1 indesign file, but the trap setting I have used to make for both Post Script file was: 1. Application In-Rip 2. Adobe In-Rip My questions are : 1. Is there any diffrence between these settings? 2. Why th

  • Insert SmartList in Business Rule

    Hi All, We have a BudYr Account which is associated with Year Smartlist......................Users select the budgetYear from Year Smartlist............We have the following calc which is attached to a web form ............to calc IRR we have BudYr a