Windows RDP Remote Desktop not working with WRVS4400N

I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.
Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

I have the EXACTLY same problem!......
It´s driving me crazy that I have spend 150 $ for some shit of a device (Sorry but i´m frustrated)
I have almost tried everything to make RDP work without any succes.
I have opened port 3389 to the spefic computer with RDP enabled. It worked prefectly with a low-budget router
undtil a changed it out a (high quality router - WRVS4400N-EU Version 2)
Could some please tell me what i´m doing wrong or what Cisco is doing wrong.
I have always belived that Cisco produckts was equal quality

Similar Messages

Remote Desktop Not working with EoMPLS

I am hosting a HVPLS domain on my 7613 Core router where my spokes (6524ME) terminate the port based Pseudowires. All spokes have an MTU size of 1522. The clients are have intermitent problems with Windows Remote Desktop and mail synchronization. This clearly is an indication of an MTU issue. After doing a little bit of research I found, I need to decrease the MTU to make RDP work properly. Is it possible to reduce MTU of an L3 port to less than 1500?. Can i adjust my tcp-mss on the port where my xconnect is originated?
Thanks in advance guys..

I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

Remote desktop not working with WAAS

I've got the WAAS setup and i'm see ok acceleration between sites but I have a complete failure of remote desktop. I've had to place a deny statement in my access list on the remote sites router for port 3389 to exclude traffic from the WAAS to even be able to get an RDP connection to work. I've tried to tell the WAAS to just set Remote-Desktop traffic to pass through but still no luck. Any help would be appreciated.

Because Internet access is allowed directly from the remote sites the ACL below will only redirect traffic destined for private addresses to the 474 located at the remote site.
ip access-list extended WCCP-REDIRECT
     permit tcp 10.0.0.0 0.255.255.255 172.17.0.0 0.0.255.25
     permit tcp 172.17.0.0 0.0.255.255 10.0.0.0 0.255.255.255
     permit tcp 172.16.0.0 0.15.255.255 172.17.0.0 0.0.255.25
     permit tcp 172.17.0.0 0.0.255.255 17.16.0.0 0.15.255.255
     permit tcp 192.168.0.0 0.0.255.255 172.17.0.0 0.0.255.25
     permit tcp 172.17.0.0 0.0.255.255 192.168.0.0 0.0.255.255
By adding this I can force RDP to sort of work
     deny tcp any any eq 3389
     deny tcp any eq 3389

Remote desktop not working with dot1x authenticated machines

Hi,
we are using machine and user authentication , when machine at logoff the machine is authenticated so users can RDP to it
but after logging in the remote desktop session goes down because after user authentication the machine gets a new ip address .
is there any way to avoid this issue ?

I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

Why windows command prompt is not working with java

I installed java 1.6 to my computer (Laptop) and it is perfectly working with Netbeans and Eclipse
but not working with windows xp xommand prompt
It compiles the code but when it is going to run it throw the following exception
Exception in thread "main" java.lang.UnsupportedClassVersionError: Example (Unsupported major.minor version 50.0)
        at java.lang.ClassLoader.defineClass0(Native Method)
        at java.lang.ClassLoader.defineClass(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.access$100(Unknown Source)
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)I've reinstalled java 1.6, but the output is same
Please help me to get it correct
Thank you

E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracl
e\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Progr
am Files\Microsoft SQL Server\90\Tools\binn\;C:\OrCAD\OrCAD_10.0\tools\pcb\bin;C
:\OrCAD\OrCAD_10.0\tools\specctra\bin;C:\OrCAD\OrCAD_10.0\tools\bin;C:\OrCAD\OrC
AD_10.0\tools\PSpice\Library;C:\OrCAD\OrCAD_10.0\tools\fet\bin;C:\OrCAD\OrCAD_10
.0\tools\jre\bin;C:\OrCAD\OrCAD_10.0\tools\Capture;C:\Program Files\QuickTime\QT
System\;C:\Program Files\Java\jdk1.6.0_01\bin;C:\Program Files\Microsoft Visual
Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev9
8\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\Program Files\Mic
rosoft Visual Studio\VC98\bin;

Win2k8 Remote Control Not Working With SRSS 4.2 + SRWC 2.2

Hi there.
I have an install of Windows Server 2008 (32bit) with SRSS 4.2 & SRWC 2.2 setup. I was previously on SRSS 4.1 & SRWC 2.1 and having the same issue I am having now, which to me tells me this problem is unresolved or i'm being a total muppet. (hopefully not the last one)
Windows Terminal Server environments has this awesome remote control feature where you can login to an RDP session which is already active and take control of the session while the end user is still logged in.With Server 2003 this works perfectly fine- it's brilliant. WIth 2008 it is a nightmare. It works for a split second and then closes off. The end users session also gets locked out (not logged out) and they have to put their windows credentials in to carry on working again.
Now... I can remote control users who are logging in via Remote Desktop on Windows XP/Vista etc.. but I can't with the Sun Ray Sessions. Does the SRWC 2.2 fully compatible with RDP 6.1 or is there any information anyone can give me to point me in the right direction of resolving this issue, like I said.. Win 2k3- Works like a dream....
Any help would be greatly appreciated.
Regards
- Joe.

I just realised I hadn't posted the logs from SRSS Server with the issues. I have just tried on another WIN2K8 Server which wasn't configured by myself or my company and the same symptoms occurred. See logs below:
Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4095]: [ID 702911 user.notice] /opt/SUNWuttsc/bin/uttsc[104]: 4116 Abort
Oct 1 10:58:06 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4117]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4123]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with error code 134 - exiting
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcrit: [ID 702911 user.notice] Info: critical application uttsc (pid=3902) exited with non zero status: 134
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 422571 user.info] Info: a critical application has exited.
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 126805 user.info] Terminating Kiosk Primary Session ( pid=3902 )
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 308018 user.info] kioskcritd stopped
Oct 1 10:58:07 ESL-SOLARIS-SPARE utauthd: [ID 794400 user.info] SessionManager0 NOTICE: EMPTY: ACTIVE session
Oct 1 10:58:15 ESL-SOLARIS-SPARE kiosk:utkioskconfig:refresh[4381]: [ID 702911 user.info] Enabled Kiosk Mode for display ':2'
Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 118685 user.info] pam_sunray_amgh::[DPY=2] AMGH_SUMMARY: token=pseudo.00144fb78760, username=, AMGH_Done?=NO(Local Session), Details=AMGH is not configured., AMGH_Target=*NONE*
Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 976841 user.info] pam_kiosk: pam_sm_authenticate: Initiating Kiosk session with user utku2
Oct 1 10:58:15 ESL-SOLARIS-SPARE kioskcritd[4420]: [ID 190395 user.info] kioskcritd started
Oct 1 10:58:57 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4612]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
Anyone able to help me out?

The app "remote" is not working with itunes - please help!

I click the add library button and it shows me the code - as soon as it shows me the code I see the icon for the ipad in my itunes window. i type in the code, but it's not working ... it beeps after about 10 seconds and then the same window is displayed saying "please enter the passcode"

From my understanding, I thought an app with a + sign meant that it is optimized for ipad and/or iphone, and you pay one price, and can download on two devices. remote is NOT optimized for ipad, but it should work. It did work on my laptop, which is why I'm frustrated it won't work on my desktop --- what's even stranger is the fact that my desktop "sees" it ... it's just the code isn't working

Remote desktop Not working

Dear Sir,
yesterday connect the RDP Is worked .but today not connect the RDP .please help me
Thanks
Gourav GAngil
09827931158

Hi gourav,
Thank you for posting in Windows Server Forum.
Please provide little more information for further troubleshooting.
Are you trying to take RDP for server session?
What’s your server and OS client version?
Did user have the access of taking Remote Desktop Session? It means we need to add the user under Remote Desktop User” local group.
In meantime you can refer below article for information.
Why can’t I connect using Remote Desktop Connection?
http://windows.microsoft.com/en-in/windows7/why-can-t-i-connect-using-remote-desktop-connection
Hope it helps!
Thanks.
Dharmesh Solanki

Remote desktop not working "remotely"

I have a Windows 7 Ultimate computer I'm trying to access through Remote Desktop.
I'm able to access that computer from another computer when both are in the same LAN, but I fail to access it through the internet.
I already tried disabling windows firewall in the target computer to narrow it down, and it still fails. So the problem mustn't be in the firewall. Only I don't know where else to look.
Since I can access within the same LAN, I assume the Remote Desktop settings are fine.
This is what I did to attempt to access the pc over the internet:
- In my router's admin console, I set up port forwarding and port mapping to work with my target computer's local IP address and port 3389 (remote desktop's port):
- Then I used an IP lookup service to find my external IP address.
- I tried that IP:port combination on remote desktop, with the user name from the target pc I want to use (I also tried without entering the user name, but it also fails):
I always get an error message saying that remote desktop is not enabled, or the remote computer is turned off or not available on the network. The first two are false, since I can access the computer on a LAN and it is definitely not turned off.
The firewall on my router is disabled, so I really don't know where I'm going wrong.
Can anyone help, please?
Thanks!!

Hi Patr1c1a,
Did you check the radion button "Allow connections from computers running any version of Remote Desktop" on the recieving computer ?
System properties / Remote
Kind regards,
Gianni

Printing locally from remote desktop not working

i have a client who recently upgraded his computers from xp to win7. he has a multi store quickbooks pos setup where he has to log in to a remote desktop connection onto a server in another store. he used to just login and run his reports and
then print them locally. since the upgrade, he has not been able to do this. the work around i found was to keep the xp laptop just for printing reports. well, now he is separating from the other store and going out on his own. he needs
to run some reports and save them to the local machine in order to bring the databases to his store. first, i need to know how to make the win 7 computer print the reports locally, so that he can run them (the xp laptop crashed). second, i need
to know how to copy the files onto his local computer (in server 2008 i can drag and drop them, not in 2003).
the win 7 is 64 bit, the server 2003 is 32. i tried installing the print drivers locally onto the server, but it's the wrong architecture. i also tried installing the 32 bit drivers onto the win 7 machine, same thing. i found several things
to try, but really need to get this fixed asap. when i try to install the printer, it shows up, and adds just fine. i am really having a fit here.
the copying thing is an absolute must also. i may be able to get by without the print issue fixed, but would like to know what happened just for my own information. thanx in advance.

Hi,
Firstly you can check whether print spooler service is not stopped. Also ensure that printer driver is compatible\supported by Windows 7 and by server. If you are using printer redirection then might happen that it’s not configure properly. The client must
have enough permission and also check client requirement for printer redirection (RDP 6.1 or above, .Net 3.5or above).
More information:
Terminal Server and Printer Redirection
Five reasons printer redirection causes Windows printing problems in RDS
For this can you describe little more”second, i need to know how to copy the files onto his local computer (in server 2008 i can drag and drop them, not in 2003).” Do you want to copy from remote session to local computer?
Hope it helps!
Thanks,
Dharmesh

Maximum number of monitors used for remote desktop not working correctly

My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
Setting - Result:
1 - 1
2 - 1 (???)
3 - 3
It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
Max

Hi Max,
Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
Karen Hu
TechNet Community Support

Palm Centro Desktop not working with new install

I just got a Palm Centro (AT&T) and installed the software. I already had Palm Desktop from my Treo 650. My information came over to my phone during Hotsync, but I can not use my desktop. When I start the program, it says there is a problem and windows is shutting it down. I am using Vista. Can you help?
Post relates to: Centro (AT&T)

Try re-installing the software and do a repair of the install. If that doesn't work then you will need to do a "clean" uninstall and then install Palm desktop again.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Remote Desktop not working via ASA

Hi Everyone,
ASA has 2 interfaces inside and sales.
There is ACL on interface sales that allow RDP on tcp port 3389 from sales to inside subnet 10.0.0.15.
Interface sales is attached to switch.
I did test from switch
2950A#telnet 10.0.0.15 3389
Trying 10.0.0.15, 3389 ...
% Connection refused by remote host
2950A#ping 10.0.0.15
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.15, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/5/8 ms
2950A#
logs on firewall show
May 18 2014 18:50:34: %ASA-6-302013: Built inbound TCP connection 313812 for sales:10.12.12.2/24066 (10.12.12.2/24066) to inside:10.0.0.15/3389 (10.0.0.15/3389)
May 18 2014 18:50:34: %ASA-6-302014: Teardown TCP connection 313812 for sales:10.12.12.2/24066 to inside:10.0.0.15/3389 duration 0:00:00 bytes 0 TCP Reset-I
Where 10.0.0.15 is PC and this PC is configured to allow Remote desktop connection coming in.
Any ideas what can i check?
Regards
MAhesh

Hi Jennifer,
I tested the RDP in both directions no luck.
Sales has security level
interface Vlan3
nameif sales
security-level 50
ip address 10.12.12.1 255.255.255.0
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
Ping works fine in both directions means from switch to PC and PC to switch so this should rule out routing right?
Seems NAT is not configured between inside and sales.
Regards
MAhesh

Windows RDP Remote Desktop not working with WRVS4400N

Similar Messages

Maybe you are looking for