Windows Release 3 Freezes on Update

When you issue an update statement and then attempt to view the same table's definition tab (data sub-tab) while the update is in progress, the program freezes. I am assuming this has something to do with the lock placed on the table by the update and then when you attempt to view the table tab with the data sub-tab selected, a deadlock of some sort occurs.

No it locked up indefinatly. I'm running the same update again (without clicking on any other tabs) and it appears that the update never finishes. The status bar just keep going back and forth, even thought it is a very small update. When i checked the columns in another session the update has occurred. This means that a) the update is happing, but SQL Developer never shows that is has completed and b) It is auto-committing, even though I have not changed any of the SQL Developer preferences from the defaults.

Similar Messages

  • Itunes 10.3.1.55 update on Windows XP install freeze

    Itunes 10.3.1.55 update on Windows XP install freeze.
    I've tried to remove everything, restart PC and try a new install.
    It fails at the same point, while copying files.

    I too am having a very similar problem with cover artwork in Itunes version 10.3.1.55 for my Windows 7, 64 bit computer. Certain Artists or Albums cover art will not show up and also when I try to manually add my own cover to the album it does not save. I can however, view with the coverflow option but its useless without all the cover art. I would greatly appreciate any help with fixing this very annoying problem.
    I've looked into the direct x suggestions and that doesn't seem to be the problem. Thanks anyway, Polydorus.

  • Windows 8.1 Freezing and Refresh Failed - winload.efi error 0xc0000001

    Hey, everybody. I'm new to these forums so I'm sorry if I do anything wrong, and sorry for the long post.
    I own a three-month-old Toshiba Satellite S50D-A that came with Windows 8 installed and ran perfectly. I was eventually asked to upgrade to Windows 8.1, and assuming it was a minor update, I immediately accepted.
    Unfortunately, ever since "upgrading" to Windows 8.1, my computer has suffered some severe performance issues. Browsing the internet has become slower, games run poorly, and worst of all, my computer will randomly freeze constantly. I am still
    able to move the mouse around but clicking does nothing or sometimes has a very delayed response. The computer usually resumes after a few minutes, but sometimes it suddenly resets on its own. This has become increasingly frustrating, especially when I am
    in class (I am a university student) and trying to take notes when the computer freezes and sometimes resets, losing my notes.
    Researching on the internet has revealed that this is not an uncommon problem with Windows 8.1, but the solutions presented online have failed to solve my problems. I've upgraded every driver on my computer which I thought was the issue but the problem has
    persisted.
    A couple of days ago, I left my computer for a few minutes and returned to find it had shut down and refused to turn back on. I was eventually able to restart the computer after contacting Toshiba and learning there was a reset hole I could poke a pin into,
    but that episode convinced me to give up on fixing the issue and to simply return my computer to factory defaults.
    If anybody has any solutions to the freeezing issue and other problems with Windows 8.1, that would be preferable, but otherwise, this brings me to my new problem. I stumbled upon Windows Refresh, the ability to return to default system settings without
    losing my files. This sounded perfect as I am willing to reinstall all of my programs if it means having a properly functioning computer again. However, upon attempting the Refresh, I was presented with a blue screen that read:
    RECOVERY
    The Application or operating system couldn't be loaded because a required file is missing or contains errors.
    File: \windows\system32\winload.efi
    Error code: 0x0000001
    It proceeds to tell me that I can use recovery tools to repair my computer, which brings me to my next trouble... I did not create recovery media when I still had Windows 8. I plan to go out and buy a 16gb usb stick tomorrow and create one but I'm not sure
    if the Windows 8.1 recovery media will work or not.
    Long story short, my computer has suffered constant freezing since updating to Windows 8.1, and my attempts to use the Refresh feature have failed due to error code 0x0000001. If anybody has a solution to any of these problems, your help would be extremely
    appreciated. As a full-time student, these technology troubles have become extremely infuriating.
    Thank you!

    Please provide us with your Event Viewer administrative logs by following these steps:
    Click Start Menu
    Type eventvwr into Search programs and files (do not hit enter)
    Right click eventvwr.exe and click Run as administrator
    Expand Custom Views
    Click Administrative Events
    Right click Administrative Events
    Save all Events in Custom View As...
    Save them in a folder where you will remember which folder and save as Errors.evtx
    Go to where you saved Errors.evtx
    Right click Errors.evtx -> send to -> compressed (zipped) folder
    Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
    If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.  The
    work around is to edit the registry.  If you are not comfortable doing this DONT.  If you are, backup the key before you do
    Press Win+"R" and input regedit
    Navigate to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
    Wanikiya and Dyami--Team Zigzag

  • Windows 8.1 freezes while booting up with discrete graphic card T520

    Hi all,
    Hoping someone can help me here. If I use my discrete video card (nvs 42000m) to boot into windows, it will freeze on the sign in page or sometimes on the metro page however when Optimus is enabled it works just fine.
    So I thought it was a driver issue. I went to Nvidia and downloaded their latest video card driver for windows 8.1. No help
    Uninstalled that, went to Lenovo's support site and installed their recommended driver and all other windows 8 drivers. Again it would freeze
    Booted into safe mode uninstalled that, turned optimus back on, and this time used Windows update to install my video drivers (intel and Nvidia both this time).
    Didn't work. So I spent maybe another hour or so fiddling and after many restarts i finally found the culprit. It was the Lenovo monitor driver. As soon as I uninstalled that, everything worked fine and I could finally use my laptop with optimus disabled and discrete video card enabled.
    Windows update keeps recommending me to update the monitor driver but if I do, then it freezes again so I'm just leaving it as the default generic monitor.
    The reason why I made this thread is to inform and save potential users in the future who have a similar laptop to mine (t520 with hd 3000 and nvidia 42000m) with Windows 8 installed and they happen to choose to solely run their laptop with the discrete graphics card, remember to uninstall your monitor driver.
    I am open to recommendations and other alternatives.

    drenched wrote:
    Hi all,
    Hoping someone can help me here. If I use my discrete video card (nvs 42000m) to boot into windows, it will freeze on the sign in page or sometimes on the metro page however when Optimus is enabled it works just fine.
    So I thought it was a driver issue. I went to Nvidia and downloaded their latest video card driver for windows 8.1. No help
    Uninstalled that, went to Lenovo's support site and installed their recommended driver and all other windows 8 drivers. Again it would freeze
    Booted into safe mode uninstalled that, turned optimus back on, and this time used Windows update to install my video drivers (intel and Nvidia both this time).
    Didn't work. So I spent maybe another hour or so fiddling and after many restarts i finally found the culprit. It was the Lenovo monitor driver. As soon as I uninstalled that, everything worked fine and I could finally use my laptop with optimus disabled and discrete video card enabled.
    Windows update keeps recommending me to update the monitor driver but if I do, then it freezes again so I'm just leaving it as the default generic monitor.
    The reason why I made this thread is to inform and save potential users in the future who have a similar laptop to mine (t520 with hd 3000 and nvidia 42000m) with Windows 8 installed and they happen to choose to solely run their laptop with the discrete graphics card, remember to uninstall your monitor driver.
    I am open to recommendations and other alternatives.

  • ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

    iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

    I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
    Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
    I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

  • Clicking noise and freezing during updating

    Hello everyone, if anyone could help with the following problem i'd be more than grateful. my ipod recently wouldnt connect to windows and started making a clicking noise. to try an resolve this i have reset and restored. I thought this would solve the problem. However, when ipod is updating it seems to freeze, stop updating and clicking noise starts. the following message appears
    the specified I/O operation on E: was not completed before the time out period expired.
    the only way i can disconnect is to shut the computer down. My playlists appear but with no songs.
    this is my 2nd ipod (clicking noise also happened so ipod was replaced in warranty) which is now out of warranty. I think my hard drive might be giving up? These discussions are my last hope! Do I buy a new ipod (possibly for the same thing to happen)? or is it worth getting it serviced? Does anyone out there have any ideas?

    Even i have a Ipod with a click wheel and is behaving similarly.
    Once i connect it to the PC (using USB) it shows the "Do Not Disconnect" sign forever and even iTunes does not recognize it, the hard disk is making some clicking noise and after some time windows returns timeout error "The specified I/O operation on E: was not completed before the time out period expired" !!
    I think we are in the same boat, What do we do ???
    Thanks

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • ITunes Program Freezes, after update of 8.1.1

    Windows XP (labtop)
    I just updated to newer version (8.1.1) of itunes. When I connect itouch to usb port it goes through process and downloads pictures, once complete itunes freezes. I can not connect to sync music. I come to a dead stop and it freezes iTunes Program and I have to use ctrl, alt and delete to escape program. If I disconnect from usb and bring up itunes it opens fine. Once itouch (MB528LL) 8G is connected, it freezes and nothing can be done.
    What I've done is, a search on the computer of all files for itunes, safari and quicktime and uninstalled and deleted everything. Then a new install of it all. This only allowed me to get a least past the picture download. (Then the Freeze)
    I've spent hours on this and I'm LOSING IT!! HELP!!!!!!!!!! 13 yr old Daughters iTouch!!

    Hi,
    Make sure the iPod touch is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
    You can also try deleting the podcasts from the iPod as others have suggested here: http://discussions.apple.com/thread.jspa?threadID=1960227
    +"*Delete a podcast:* In the podcasts list in iPod, swipe left or right over the podcast, then+
    +tap Delete."+ from page 46 of the iPod touch User Guide
    http://manuals.info.apple.com/enUS/iPod_touch_2.2_UserGuide.pdf
    If the issue persists after directly connecting the iPod touch and trying the tips in the other thread, try restoring the iPod from recovery mode. This article: http://support.apple.com/kb/HT1808 will walk you through the process.
    -Jason

  • Windows XP Machine Freeze before Login Screen 2015

    Has there been any Windows updates applied recently that may be causing this? Has any new hardware been added to them? A virus seems unlikely but not impossible. How old are the machines and how many is this happening to?
    When you get to System Restore, what is the last checkpoint showing as having a Restore point created for? It is quite likely that that event is causing this
    You really need to look at getting off XP - it is out of support and is going to have more and more of these problems

    Hi All,
    Suddenly all machines running Windows XP just freezes before the login screen comes. 
    Windows boots up. Showing the LOGO but just before the login screen comes it just freezes.
    I have performed system restore some restore and boots up but some does not restore.
    On Some of the computers that have been restored successfully, this problem has reoccured. The are instance where we have formatted a machine completely, but after a while this problem reoccurs. 
    I am suspecting a virus but not totally sure.
    Can anyone help 
    This topic first appeared in the Spiceworks Community

  • Skype windows 8.1 freezes for a bit while video an...

    Hi,
    I have a Lenovo T440s with Windows 8.1 Pro installed 8GB Ram and INtel HD Graphics card. Whenever i do video call on skype using desktop version after a while skype freezes for a bit, disconnects the call and shows red on the connection bar. After few mintues it works again, then does the same thing and completely freeze and shutdown. When using skype app(modern windows one) its does similar thing, just does shutdown itself yet freezes, disconnects and reconnect. this is constant thing noticed on both side of skype. however, at the same time if switch to my macbook pro and call the same person, i can do video for hours and no problem !
    Is anyone else having the same problem or is it just me. I need a solution please, its really annoying when doingsome serious work !

    drenched wrote:
    Hi all,
    Hoping someone can help me here. If I use my discrete video card (nvs 42000m) to boot into windows, it will freeze on the sign in page or sometimes on the metro page however when Optimus is enabled it works just fine.
    So I thought it was a driver issue. I went to Nvidia and downloaded their latest video card driver for windows 8.1. No help
    Uninstalled that, went to Lenovo's support site and installed their recommended driver and all other windows 8 drivers. Again it would freeze
    Booted into safe mode uninstalled that, turned optimus back on, and this time used Windows update to install my video drivers (intel and Nvidia both this time).
    Didn't work. So I spent maybe another hour or so fiddling and after many restarts i finally found the culprit. It was the Lenovo monitor driver. As soon as I uninstalled that, everything worked fine and I could finally use my laptop with optimus disabled and discrete video card enabled.
    Windows update keeps recommending me to update the monitor driver but if I do, then it freezes again so I'm just leaving it as the default generic monitor.
    The reason why I made this thread is to inform and save potential users in the future who have a similar laptop to mine (t520 with hd 3000 and nvidia 42000m) with Windows 8 installed and they happen to choose to solely run their laptop with the discrete graphics card, remember to uninstall your monitor driver.
    I am open to recommendations and other alternatives.

  • Contract Release value is not updated with Limit item value

    We have SRM 4.0 with ECS scenario.
    Contract are created in SRM and replicated to ERP.
    If we create PO with Service line and Limit line using contract in both of these line items, contract Release value is getting updated only with Service line item value.
    But the contract Total value is the addition of Service and Limit value of PO.
    Why Contract Release value is not getting updated with Limit item value. Please help as early as possible.

    Hi Sandeep
    Yes. there are various reasons .upon your contract incorrect status and linkage not establised / or more attachment in SRM GOA.
    what type of contract are you using? GOA or CCTR
    If it is GOA - which version of SRM and service pack ?are you in ?
    If it is a GOA , BLAREL idoc might failed to post the release value in the SRM .
    How contracts are created material / mat group ?
    to fix or understand the issue, you need to recreate the issue.
    what is the ERROR in BLAREL in SRM idoc monitoring ?

  • Contract Release Value is not updated with Confirmation or Invoice value

    The release value for a contract in SRM EBP shows the value of purchase orders created using that contract.  It does not take into account confirmation and/or invoice values.
    For example I create a PO for 10 items at £100/each using Contract ABC.  The total value of the PO is £1000 and the release value contract ABC would be £1000.  If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
    Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
    Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

    Hi
    <u>Which SRM and R/3 versions are you using ?</u>
    <b>Meanwhile, please go through the following SAP OSS Notes, which will help in this case -></b>
    Note 622045 Net value in release overview of contract is incorrect
    Note 493519 Release quantities are not updated
    Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
    Note 1102886 Contracts: Lesser Field length for Target Value
    Note 1082548 Check of Released quantity and released value in contract
    Note 656181 Release synchronization of releases on services
    Note 874920 Currency not allowed to be changed for a 'Released' Contract
    Note 703771 Resetting release values during purchase order item deletion
    Note 643823 BLAREL: Incorrect values in service segment
    Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
    Note 520734 Target value not converted if currency is changed
    Note 528897 Documents not displayed in contract release order overview
    Note 430373 BBP_CON_MNT: No releases available
    Note 491993 Entry of contracts with target values
    Note 437491 Purchase contract: Incorrect update of the call-off values
    Note 406799 BBP_CON_MNT: Fields after contract release ready for input
    Note 398168 Purchase contract: Target value is not changed
    <b>Do let me know.</b>
    Regards
    - Atul

  • HT1386 I have an issue. I connected my IPhone 4 to my windows 7 computer with the updated iTunes and updated iOS but for some reason, My "iPhone" tab doesn't come up. Why is that and how do you fix it?! I really want to sync the rest of my music. Please h

    Help! I updated iTunes on my windows 7 laptop and I updated my iOS on my iphone4 and I used a USB to plug it into my computer but it doesn't have the "iPhone"" icon appear in the corner of the screen. Can anybody please help me fix this so that I can sync my music to my iPhone. I would really appreciate it! Please and thank you!!!

    Device not detected in iTunes for Windows:  support.apple.com/kb/ts1538

  • I understand that your iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.

    iPhone 5 is not recognized by iTunes 11.2 on  Windows 8 pc after you updated your device iOS to iOS 7.1.1.

    Hi calltimecasting,
    Welcome to the Apple Support Communities! If your iPhone is not recognized by iTunes on Windows 8, I suggest the steps in the following article to get this resolved.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    I hope this helps,  
    -Joe

  • HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

    iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

    Hey petanque1,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

Maybe you are looking for